Predicted accuracy of and response to genomic selection for new traits in dairy cattle

Genomic selection relaxes the requirement of traditional selection tools to have phenotypic measurements on close relatives of all selection candidates. This opens up possibilities to select for traits that are difficult or expensive to measure. The objectives of this paper were to predict accuracy of and response to genomic selection for a new trait, considering that only a cow reference population of moderate size was available for the new trait, and that selection simultaneously targeted an index and this new trait. Accuracy for and response to selection were deterministically evaluated for three different breeding goals. Single trait selection for the new trait based only on a limited cow reference population of up to 10 000 cows, showed that maximum genetic responses of 0.20 and 0.28 genetic standard deviation (s.d.) per year can be achieved for traits with a heritability of 0.05 and 0.30, respectively. Adding information from the index based on a reference population of 5000 bulls, and assuming a genetic correlation of 0.5, increased genetic response for both heritability levels by up to 0.14 genetic s.d. per year. The scenario with simultaneous selection for the new trait and the index, yielded a substantially lower response for the new trait, especially when the genetic correlation with the index was negative. Despite the lower response for the index, whenever the new trait had considerable economic value, including the cow reference population considerably improved the genetic response for the new trait. For scenarios with a zero or negative genetic correlation with the index and equal economic value for the index and the new trait, a reference population of 2000 cows increased genetic response for the new trait with at least 0.10 and 0.20 genetic s.d. per year, for heritability levels of 0.05 and 0.30, respectively. We conclude that for new traits with a very small or positive genetic correlation with the index, and a high positive economic value, considerable genetic response can already be achieved based on a cow reference population with only 2000 records, even when the reliability of individual genomic breeding values is much lower than currently accepted in dairy cattle breeding programs. New traits may generally have a negative genetic correlation with the index and a small positive economic value. For such new traits, cow reference populations of at least 10 000 cows may be required to achieve acceptable levels of genetic response for the new trait and for the whole breeding goal.     

Whole-genome resequencing reveals selection signatures associated with milk production traits in African Kenana dairy zebu cattle

Milk production and composition are the most economically important traits affecting profitability in dairy cattle. In this study, we aimed at detecting signatures of positive selection in Kenana, known as one of the high milk production African indigenous zebu cattle, using next-generation sequencing data. To detect genomic signatures of positive selection, we applied three methods based on population comparison, fixation index (F_ST), cross population composite likelihood ratio (XP-CLR) and nucleotide diversity (Pi). Further analysis showed that several candidate genes such as CSN3, IGFBP-2, RORA, ABCG2, B4GALT1 and GHR are positively selected for milk production traits in Kenana cattle. The candidate genes and enriched pathways identified in this study may provide a basis for future genome-wide association studies and investigations into genomic targets of selection in dairy cattle.     

Genetic mapping of loci responsible for milk production traits in dairy cattle

The review presents a definition of loci controlling quantitative traits (quantitative trait loci, QTLs) and localization of all currently known QTLs responsible for milk production traits in dairy cattle. The QTL number and chromosome localization are verified, with special reference to chromosomes 1, 3, 6, 14, 20, and 23. In a number of cases, close location of QTLs for mastitis and for milk production traits was found. Some aspects of QTL pleiotropy and epistasis are discussed and mapping methods of major QTLs are listed. Original Russian Text Sc M.G. Smaragdov, 2006, published in Genetika, 2006, Vol. 42, No. 1, pp. 5–21.     

Responses to selection for milk traits in dairy buffaloes

The aim of the present study was to estimate the index and individual responses to selection for milk (MY), fat (FY) and protein (PY) yields for different breeding goals for two commercial buffalo milk production systems in S?o Paulo State characterized by: 1) all milk produced is sold to the industry (MILK) and 2) all milk produced is used in the mozzarella cheese-making process at the farm (MOZZARELLA). The current payment policy is based exclusively on milk volume. The mozzarella price refers to the wholesale selling price. Index responses to selection (IR) were calculated for three different breeding goals (BG): 1) MY exclusively (BG(1)); 2) FY + PY (BG(2)) and 3) MY + FY + PY (BG(3)). IR for the MILK system were 41.79 US dollars (BG(1)), 5.91 US dollars (BG(2)) and 38.22 US dollars (BG(3)). For the MOZZARELLA system, IR were 179.50 US dollars (BG(1)), 262.85 US dollars (BG(2)) and 402.41 US dollars (BG(3)). The results suggest that for the present circumstances, selection for milk components is not advantageous when milk is produced for sale to the industry. However, when mozzarella making is added to the system, the selection for components and milk volume is the most economically beneficial.     

Genome-wide associations for investigating time-dependent genetic effects for milk production traits in dairy cattle

Phenotypic variation in milk production traits has been described over the course of a lactation as well as between different parities. The objective of this study was to investigate whether variation in production is affected by different loci across lactations. A genome-wide association study (GWAS) using a 50-k SNP chip was conducted in 152 divergent German Holstein Friesian cows to test for association with milk production traits over different lactations. The first four lactations were analysed regarding milk yield, fat, protein, lactose, milk urea nitrogen yield and content as well as somatic cell score. Two approaches were used: (i) Wilmink curve parameters were used to assess the genetic effects over the course of a lactation and (ii) test-day yield deviations (YD) were used as a normative approach for a GWAS. The significant effects were largest for markers affecting curve parameters for which there was a statistical power <0.8 of detection even in this small design. While significant markers for YDs were detected in this study, the power to detect effects of a similar magnitude was only 0.11, suggesting that many loci may have been missed with this approach in the present design. Furthermore, all significant effects were specific for a single lactation, leading to the conclusion that the variance explained by a certain locus changes from lactation to lactation. We confirm the common evidence that most production traits vary in the degree of persistency after the peak as a result of genetic influence.     

Modelling and estimation of genotype by environment interactions for production traits in French dairy cattle

Background

Genotype by environment interactions are currently ignored in national genetic evaluations of dairy cattle. However, this is often questioned, especially when environment or herd management is wide-ranging. The aim of this study was to assess genotype by environment interactions for production traits (milk, protein, fat yields and fat and protein contents) in French dairy cattle using an original approach to characterize the environments.

Methods

Genetic parameters of production traits were estimated for three breeds (Holstein, Normande and Montbéliarde) using multiple-trait and reaction norm models. Variables derived from Herd Test Day profiles obtained after a test day model evaluation were used to define herd environment.

Results

Multiple-trait and reaction norm models gave similar results. Genetic correlations were very close to unity for all traits, except between some extreme environments. However, a relatively wide range of heritabilities by trait and breed was found across environments. This was more the case for milk, protein and fat yields than for protein and fat contents.

Conclusions

No real reranking of animals was observed across environments. However, a significant scale effect exists: the more intensive the herd management for milk yield, the larger the heritability.     

The number of loci that affect milk production traits in dairy cattle

We have used the results of an experiment mapping quantitative trait loci (QTL) affecting milk yield and composition to estimate the total number of QTL affecting these traits. We did this by estimating the number of segregating QTL within a half-sib daughter design using logic similar to that used to estimate the "false discovery rate" (FDR). In a half-sib daughter design with six sire families we estimate that the average sire was heterozygous for approximately 5 QTL per trait. Also, in most cases only one sire was heterozygous for any one QTL; therefore at least 30 QTL were likely to be segregating for these milk production traits in this Holstein population.     

Genomic selection for feed efficiency in dairy cattle

Feed is a major component of variable costs associated with dairy systems and is therefore an important consideration for breeding objectives. As a result, measures of feed efficiency are becoming popular traits for genetic analyses. Already, several countries account for feed efficiency in their breeding objectives by approximating the amount of energy required for milk production, maintenance, etc. However, variation in actual feed intake is currently not captured in dairy selection objectives, although this could be possible by evaluating traits such as residual feed intake (RFI), defined as the difference between actual and predicted feed (or energy) intake. As feed intake is expensive to accurately measure on large numbers of cows, phenotypes derived from it are obvious candidates for genomic selection provided that: (1) the trait is heritable; (2) the reliability of genomic predictions are acceptable to those using the breeding values; and (3) if breeding values are estimated for heifers, rather than cows then the heifer and cow traits need to be correlated. The accuracy of genomic prediction of dry matter intake (DMI) and RFI has been estimated to be around 0.4 in beef and dairy cattle studies. There are opportunities to increase the accuracy of prediction, for example, pooling data from three research herds (in Australia and Europe) has been shown to increase the accuracy of genomic prediction of DMI from 0.33 within country to 0.35 using a three-country reference population. Before including RFI as a selection objective, genetic correlations with other traits need to be estimated. Weak unfavourable genetic correlations between RFI and fertility have been published. This could be because RFI is mathematically similar to the calculation of energy balance and failure to account for mobilisation of body reserves correctly may result in selection for a trait that is similar to selecting for reduced (or negative) energy balance. So, if RFI is to become a selection objective, then including it in an overall multi-trait selection index where the breeding objective is net profit is sensible, as this would allow genetic correlations with other traits to be properly accounted for. If genetic parameters are accurately estimated then RFI is a logical breeding objective. If there is uncertainty in these, then DMI may be preferable.     

Evaluation of type traits in relation to production,and their importance in early selection for milk performance in dairy buffaloes

Type traits (TTs) can contribute to breeding animals with good economic traits such as production, longevity, fertility, and profitability. Dairy buffaloes are the second largest source of milk supply in the world, and their TTs should be taken into consideration in future dairy buffalo breeding programmes. However, the relationship between TTs and milk production traits in buffalo remains largely unknown. The study aimed to establish an early selection method for buffaloes with desirable milk performance by TTs. Using 1 908 records from 678 buffaloes, the relationship between TTs and milk production traits was analysed and the optimal growth curves of TTs related to milk production traits were constructed. We examined the correlations between 45 TTs (33 body structural, 12 udder and teat morphological traits) and three milk production traits (milk yield (MY), milk fat percentage (MF), and milk protein percentage (MP)). The results showed that the highest correlation was found between MY and udder circumference (r = 0.438), teat length (r = ?0.380) or heart girth (r = ?0.341). The teat distance and teat circumference exhibited a significant negative correlation with MF and MP. Rump length was the only trait that had a significant positive correlation with milk production traits, suggesting that milk performance could be comprehensively improved by including rump length in the selection procedure. Notably, we found that high milk production traits was obtained from the buffaloes with short teats (<6 cm), small heart girth (<200 cm), large udder circumference (>104 cm), long rump (>39 cm), and small distance between teats. Moreover, an early selection method for buffaloes with excellent milk performance was developed based on the non-linear models. Brody model exhibited the best fitting effect for heart girth and rump length, while the Logistic model displayed the best fitting effect for teat length. Our findings provide theoretical basis for the early selection of buffaloes with desirable milk performance.     

Genotyping strategies for genomic selection in small dairy cattle populations

This study evaluated different female-selective genotyping strategies to increase the predictive accuracy of genomic breeding values (GBVs) in populations that have a limited number of sires with a large number of progeny. A simulated dairy population was utilized to address the aims of the study. The following selection strategies were used: random selection, two-tailed selection by yield deviations, two-tailed selection by breeding value, top yield deviation selection and top breeding value selection. For comparison, two other strategies, genotyping of sires and pedigree indexes from traditional genetic evaluation, were included in the analysis. Two scenarios were simulated, low heritability (h² = 0.10) and medium heritability (h² = 0.30). GBVs were estimated using the Bayesian Lasso. The accuracy of predicted GBVs using the two-tailed strategies was better than the accuracy obtained using other strategies (0.50 and 0.63 for the two-tailed selection by yield deviations strategy and 0.48 and 0.63 for the two-tailed selection by breeding values strategy in low- and medium-heritability scenarios, respectively, using 1000 genotyped cows). When 996 genotyped bulls were used as the training population, the sire’ strategy led to accuracies of 0.48 and 0.55 for low- and medium-heritability traits, respectively. The Random strategies required larger training populations to outperform the accuracies of the pedigree index; however, selecting females from the top of the yield deviations or breeding values of the population did not improve accuracy relative to that of the pedigree index. Bias was found for all genotyping strategies considered, although the Top strategies produced the most biased predictions. Strategies that involve genotyping cows can be implemented in breeding programs that have a limited number of sires with a reliable progeny test. The results of this study showed that females that exhibited upper and lower extreme values within the distribution of yield deviations may be included as training population to increase reliability in small reference populations. The strategies that selected only the females that had high estimated breeding values or yield deviations produced suboptimal results.     

Genetic parameter estimates and response to selection for weight and testicular traits in Nelore cattle

We estimated genetic parameters for various phases of body and testicular growth until 550 days of age in Nelore cattle, using Bayesian inference, including correlation values and error estimates. Weight and scrotal records of 54,182 Nelore animals originating from 18 farms participating in the Brazilian Nelore Breeding Program (PMGRN) were included. The following traits were measured: weight at standard ages of 120 (W120), 210 (W210), 365 (W365), 450 (W450), and 550 (W550) days; weight gain between 120/210 (WG1), 210/365 (WG2), 365/450 (WG3), 450/550 (WG4), 120/365 (WG5), 120/450 (WG6), 120/550 (WG7), 210/450 (WG8), 210/550 (WG9), and 365/550 (WG10) days of age; scrotal circumference at 365 (SC365), 450 (SC450) and 550 (SC550) days of age, and testicular growth between 365/450 (TG1), 450/550 (TG2) and 365/550 (TG3) days of age. The model included contemporary group (current farm, year and two-month period of birth, sex, and management group) and age of dam at calving, divided into classes as fixed effects. The model also included random effects for direct additive, maternal additive and maternal permanent environmental, and residual effects. The direct heritability estimates ranged from 0.23 to 0.39, 0.13 to 0.39 and 0.32 to 0.56 for weights at standard ages, weight gains and testicular measures, respectively. The genetic correlations between weights (0.69 to 0.94) and scrotal circumferences (0.91 to 0.97) measured at standard ages were higher than those between weight gain and testicular growth (0.18 to 0.97 and 0.36 to 0.77, respectively). The weights at standard ages responded more effectively to selection, and also gave strong correlations with the other traits.     

Genomic scans for selection signatures revealed candidate genes for adaptation and production traits in a variety of cattle breeds

Domestication and selection are the major driving forces responsible for the determinative genetic variability in livestock. These selection patterns create unique genetic signatures within the genome. BovineSNP50 chip data from 236 animals (seven indicine and five taurine cattle breeds) were analyzed in the present study. We implemented three complementary approaches viz. iHS (Integrated haplotype score), ROH (Runs of homozygosity), and F_ST, to detect selection signatures. A total of 179, 56, and 231 regions revealed 518, 277, and 267 candidate genes identified by iHS, ROH, and F_ST methods, respectively. We found several candidate genes (e.g., NCR3, ARID5A, HIST1H2BN, DEFB4, DEFB7, HSPA1L, HSPA1B, and DNAJB4) related to production traits and the adaptation of indigenous breeds to local environmental constraints such as heat stress and disease susceptibility. However, further studies are warranted to refine the findings using a larger sample size, whole-genome sequencing, and/or high density genotyping.     

奶牛重要经济性状全基因组关联分析研究进展

产奶性状是奶牛最重要的生产性状,随着平衡育种理念的提出和发展,繁殖性状、体型性状、健康性状和长寿性等功能性状也逐渐被重视并纳入育种规划中。鉴定产奶性状和功能性状主效基因或遗传标记并将之应用于奶牛标记辅助选择可望加快遗传进展。随着高密度SNP标记的高通量检测技术的发展,全基因组关联分析已成为鉴定畜禽重要经济性状基因的重要途径。文章对奶牛产奶性状和功能性状全基因组关联分析研究进展进行综述。     

Analyzes of genome-wide association follow-up study for calving traits in dairy cattle

Background

Genomic islands play an important role in medical, methylation and biological studies. To explore the region, we propose a CpG islands prediction analysis platform for genome sequence exploration (CpGPAP).

Results

CpGPAP is a web-based application that provides a user-friendly interface for predicting CpG islands in genome sequences or in user input sequences. The prediction algorithms supported in CpGPAP include complementary particle swarm optimization (CPSO), a complementary genetic algorithm (CGA) and other methods (CpGPlot, CpGProD and CpGIS) found in the literature. The CpGPAP platform is easy to use and has three main features (1) selection of the prediction algorithm; (2) graphic visualization of results; and (3) application of related tools and dataset downloads. These features allow the user to easily view CpG island results and download the relevant island data. CpGPAP is freely available at http://bio.kuas.edu.tw/CpGPAP/.

Conclusions

The platform's supported algorithms (CPSO and CGA) provide a higher sensitivity and a higher correlation coefficient when compared to CpGPlot, CpGProD, CpGIS, and CpGcluster over an entire chromosome.     

奶牛重要经济性状全基因组关联分析研究进展

产奶性状是奶牛最重要的生产性状, 随着平衡育种理念的提出和发展, 繁殖性状、体型性状、健康性状和长寿性等功能性状也逐渐被重视并纳入育种规划中。鉴定产奶性状和功能性状主效基因或遗传标记并将之应用于奶牛标记辅助选择可望加快遗传进展。随着高密度SNP标记的高通量检测技术的发展, 全基因组关联分析已成为鉴定畜禽重要经济性状基因的重要途径。文章对奶牛产奶性状和功能性状全基因组关联分析研究进展进行综述。     

Analyzes of genome-wide association follow-up study for calving traits in dairy cattle

ABSTRACT: BACKGROUND: There is often a pronounced disagreement between results obtained from different genome-wide association studies in cattle. There are multiple reasons for this disagreement. Particularly the presence of false positives leads to a need to validate detected QTL before they are optimally incorporated or weighted in selection decisions or further studied for causal gene. In dairy cattle progeny testing scheme new data is routinely accumulated which can be used to validate previously discovered associations. However, the data is not an independent sample and the sample size may not be sufficient to have enough power to validate previous discoveries. Here we compared two strategies to validate previously detected QTL when new data is added from the same study population. We compare analyzing a combined dataset (COMB) including all data presently available to only analyzing a validation dataset (VAL) i.e. a new dataset not previously analyzed as an independent replication. Secondly, we confirm SNP detected in the Reference population (REF) (i.e. previously analyzed dataset consists of older bulls) in the VAL dataset. RESULTS: Clearly the results from the combined (COMB) dataset which had nearly twice the sample size of other two subsets allowed the detection of far more significant associations than the two smaller subsets. The number of significant SNPs in REF (older bulls) was about four times higher compare to VAL (younger bulls) though both had similar sample sizes, 2,219 and 2,039 respectively. A total of 424 SNP-trait combinations on 22 chromosomes showed genome-wide significant association involving 284 unique SNPs in the COMB dataset. In the REF data set 101 associations (73 unique SNPs) and in the VAL 24 associations (18 unique SNPs) were found genome-wide significant.Sixty-eight percent of the SNPs in the REF dataset could be confirmed in the VAL dataset. Out of 469 unique SNPs showing chromosome-wide significant association with calving traits in the REF dataset 321 could be confirmed in the VAL dataset at P < 0.05. CONCLUSIONS: The follow-up study for GWAS in cattle will depend on the aim of the study. If the aim is to discover novel QTL, analyses of the COMB dataset is recommended, while in case of identification of the causal mutation underlying a QTL, confirmation of the discovered SNPs are necessary to avoid following a false positive.     

Genes of the RNASE5 pathway contain SNP associated with milk production traits in dairy cattle

Background

Identification of the processes and mutations responsible for the large genetic variation in milk production among dairy cattle has proved challenging. One approach is to identify a biological process potentially involved in milk production and to determine the genetic influence of all the genes included in the process or pathway. Angiogenin encoded by angiogenin, ribonuclease, RNase A family 5 (RNASE5) is relatively abundant in milk, and has been shown to regulate protein synthesis and act as a growth factor in epithelial cells in vitro. However, little is known about the role of angiogenin in the mammary gland or if the polymorphisms present in the bovine RNASE5 gene are associated with lactation and milk production traits in dairy cattle. Given the high economic value of increased protein in milk, we have tested the hypothesis that RNASE5 or genes in the RNASE5 pathway are associated with milk production traits. First, we constructed a “RNASE5 pathway” based on upstream and downstream interacting genes reported in the literature. We then tested SNP in close proximity to the genes of this pathway for association with milk production traits in a large dairy cattle dataset.

Results

The constructed RNASE5 pathway consisted of 11 genes. Association analysis between SNP in 1 Mb regions surrounding these genes and milk production traits revealed that more SNP than expected by chance were associated with milk protein percent (P < 0.05 significance). There was no significant association with other traits such as milk fat content or fertility.

Conclusions

These results support a role for the RNASE5 pathway in milk production, specifically milk protein percent, and indicate that polymorphisms in or near these genes explain a proportion of the variation for this trait. This method provides a novel way of understanding the underlying biology of lactation with implications for milk production and can be applied to any pathway or gene set to test whether they are responsible for the variation of complex traits.