Tn916-dependent conjugal transfer of PC194 and PUB110 from Bacillus subtilis into Bacillus thuringiensis subsp. israelensis

The Staphylococcus aureus plasmids pC194 and pUB110 were introduced into Bacillus thuringiensis subsp. israelensis by using the Streptococcus faecalis transposon Tn916 as a mobilizing agent. Plasmid transfer occurred only when B. thuringiensis subsp. israelensis was mated with a B. subtilis donor that contained both pC194 and pUB110 and Tn916; plasmid transfer was not observed in the absence of the transposon. B. thuringiensis transconjugants resistant to chloramphenicol (Cmr) and tetracycline (Tetr) were detected at a frequency of 1.96 x 10(-6) per recipient cell, whereas the Tetr phenotype, but not the Cmr, was observed at a frequency of 1.09 x 10(-4). The converse, Cmr but not Tetr, was observed at a frequency of 2.94 X 10(-5). The transfer of pUB110 from B. subtilis to B. thuringiensis subsp. israelensis was observed at a frequency of 3.0 x 10(-6) per recipient cell but concomitant transfer of pUB110 and Tn916 was not observed. Mobilization of plasmid pE194 was not observed under these conditions. Transconjugants were detected in filter matings only, not in broth. The Tn916 phenotype was maintained during serial passage of B. thuringiensis without selection, whereas the pC194 phenotype was not. Unlike pC194, however, pUB110 remained stable in B. thuringiensis during several passages through nonselective medium. Southern hybridization analysis demonstrated that Tn916 had inserted into several different sites on the B. thuringiensis chromosome and that pC194 and pUB110 were maintained as an autonomous plasmid.     

Origin and mode of replication of plasmids pE194 and pUB110

Replication of the multicopy antibiotic resistance plasmids pE194 and pUB110 has been studied in Bacillus subtilis. Based on electron microscopic analysis of replication intermediates and on evidence from deletants, we have determined that both plasmids replicate unidirectionally from fixed origins by a Θ mechanism. The location of these origins and the directions of replication have been determined relative to the physical maps. A cointegrate of pE194 and pUB110 has also been studied and evidence is presented from electron microscopy, temperature resistance, and copy number analysis that the cointegrate uses both parental replication origins.     

Stability of Integrated Plasmids in the Chromosome of Lactococcus lactis

Derivatives of plasmids pBR322, pUB110, pSC101, and pTB19, all containing an identical fragment of lactococcal chromosomal DNA, were integrated via a Campbell-like mechanism into the same chromosomal site of Lactococcus lactis MG1363, and the transformants were analyzed for the stability of the integrated plasmids. In all cases the erythromycin resistance gene of pE194 was used as a selectable marker. Transformants obtained by integration of the pBR322 derivatives contained a head-to-tail arrangement of several plasmid copies, which most likely was caused by integration of plasmid multimers. Single-copy integrations were obtained with the pSC101 and pTB19 derivatives. In all of these transformants no loss of the erythromycin gene was detected during growth for 100 generations in the absence of the antibiotic. In contrast, transformants containing integrated amplified plasmid copies of pUB110 derivatives were unstable under these conditions. Since pUB110 appeared to have replicative activity in L. lactis, we suggest that this activity destabilized the amplified structures in L. lactis.     

A Useful Cloning Vector for Bacillus subtilis

We have constructed plasmid pDN1050 a new small cloning vector for Bacillus subtilis . pDN1050 harbors the origin of replication of Staphylococcus aureus plasmid pUB110 and the chloramphenicol resistance gene of S. aureus plasmid pC194. The plasmid is segregationally and structurally stable. Plasmid pDN1370, a low copy number mutant of pDN1050 was isolated and shown to harbor a mutation in the repA gene of the replication protein.     

Nucleotide sequence and functional map of pC194, a plasmid that specifies inducible chloramphenicol resistance.

The nucleotide sequence of pC194, a small plasmid from Staphylococcus aureus which is capable of replication in Bacillus subtilis, has been determined. The genetic determinant of chloramphenicol (CAM) resistance, which includes the chloramphenicol acetyl transferase (CAT) structural gene, the putative promoter and controlling element of this determinant, have been mapped functionally by subcloning a 1,035-nucleotide fragment which specifies the resistance phenotype using plasmid pBR322 as vector. Expression of CAM resistance is autogenously regulated since the 1,035-nucleotide fragment containing the CAT gene sequence and its promoter cloned into pBR322 expresses resistance inducibly in the Escherichia coli host. A presumed controlling element of CAT expression consists of a 37-nucleotide inverted complementary repeat sequence that is located between the -10 and ribosome-loading sequences of the CAT structural gene. Whereas the composite plasmid containing the minimal CAT determinant cloned in pBR322 could not replicate in B. subtilis, ability to replicate in B. subtilis was seen if the fragment cloned included an extension consisting of an additional 300 nucleotides beyond the 5' end of the single pC194 MspI site associated with replication. This 5' extension contained a 120-nucleotide inverted complementary repeat sequence similar to that found in pE194 TaqI fragment B which contains replication sequences of that plasmid. pC194 was found to contain four opening reading frames theoretically capable of coding for proteins with maximum molecular masses, as follows: A, 27,800 daltons; B, 26,200 daltons; C, 15,000 daltons; and D, 9,600 daltons. Interruption or deletion of either frame A or D does not entail loss of ability to replicate or to express CAM resistance, whereas frame B contains the CAT structural gene and frame C contains sequences associated with plasmid replication.     

Thermostability and superhelicity of plasmid DNA in Bacillus stearothermophilus

Summary The thermostability of the staphylococcal plasmids pC194 and pUB110 and their antibiotic-resistance determinants was examined upon transfer to Bacillus stearothermophilus CU21. Plasmid pGS13, a pUB110 derivative carrying the chloramphenicol acetyltransferase (CAT) gene of pC194, could be maintained up to the maximum growth temperature (68° C) by selection for chloramphenicol resistance. In the absence of selective pressure, pGS13 was lost at temperatures above 60° C. Segregational instability of pGS13 was accompanied by a progressive loss of negative superhelicity at elevated temperatures. Thermostable mutants of pGS13 were isolated by screening for expression of the antibiotic-resistance determinants after growth under non-selective conditions. These mutants were found to contain an insertion of a 1.7 kb DNA sequence derived from the cryptic B. stearothermophilus plasmid pBS02. Increased thermostability correlated with preservation of plasmid superhelicity at elevated temperatures.     

Interference of plasmid pCM194 with lysogeny of bacteriophage SP02 in Bacillus subtilis.

Three observations indicated that the 2-megadalton chloramphenicol resistance plasmid pCM194 interferes with SP02 lysogeny of Bacillus subtilis. SP02 plaques formed on B. subtilis(pCM194) appeared almost clear, whereas plaques produced on plasmid-free or pUB110-containing cells contained large turbid centers. The number of phages spontaneously liberated by B. subtilis(SP02) was increased 10-fold or more when pCM194 was also present in the lysogens. Lastly, growth of B. subtilis(SP02, pCM194) for approximately 20 to 25 generations resulted in essentially complete loss of the prophage. This interference was not observed with pUB110 or pE194, and the pCM194 interference was not directed against B. subtilis temperate phage phi 105, which is unrelated to SP02. Lytic replication of SP02 appeared to be unaffected by pCM194. pCM194 interference with SP02 lysogeny was demonstrable in recombination-proficient strains and a recE mutant of B. subtilis. SP02 prophage which were noninducible due to the phage ind mutation were resistant to pCM194 interference. pCM194 interference was lost when the entire pCM194 molecule was joined at its unique HpaII site or at one of the two MboI sites to pUB110 or pUB110 derivatives. pBR322 joined to pCM194 at the same MboI site or at the HindIII site produced chimeras that retained the ability to interfere with SP02 lysogeny. A three-part plasmid constructed by joining pBR322 to pCM194 (at HindIII sites) and to pE194 (at PstI sites) was compatible with the SP02 prophage and showed a temperature-sensitive replication phenotype characteristic of the pE194 replicon. One explanation for the interference involves competition for a host component between an SP02 genome attempting to establish lysogeny and plasmids whose replication is directed by the pCM194 replicon.     

Construction of a vector for cloning promoters in Bacillus subtilis

A versatile vector for cloning DNA fragments containing promoter activity in Bacillus subtilis was derived from plasmids pBR322, pUB110 and pC194. Selection is based on chloramphenicol resistance which is dependent upon the introduction of DNA fragments allowing expression of a chloramphenicol acetyl transferase gene. The plasmid contains a second selectable marker, neomycin resistance, and contains functional origins of replication for both B. subtilis and Escherichia coli.     

Expression in Escherichia coli of a staphylococcal gene for resistance to macrolide, lincosamide, and streptogramin type B antibiotics.

Plasmid pBD9, which comprises two plasmids from Staphylococcus aureus, pE194 and pUB110, was joined to plasmid pBR322 by in vitro recombination to form plasmid pKH80. The ermC gene of plasmid pE194 confers inducible resistance to macrolide, lincosamide, and streptogramin type B antibiotics. When pKH80 was transferred to Escherichia coli K-12, the bacteria became resistant to several of these antibodies.     

Characteristics of plasmid stability in Bacillus subtilis NB22, an antifungal-antibiotic iturin producer

The stability of plasmids pC194 and pUB110 was investigated in an antifungal antibiotic iturin producer, Bacillus subtilis NB22. Although plasmid pC194 was maintained stably over a hundred generations in five successive cultivations in iturin-production no. 3 medium, significant curing was observed when the cultivation was prolonged for 10 d in the same medium. When the transformant of pC194 was cultivated in Schaeffer's sporulation medium, drastic curing took place in accordance with the occurrence of sporulation, even in the presence of an antibiotic for selective pressure. In the case of pUB110, in sharp contrast to the result with pC194, high stability was observed in the sporulation medium, but significant curing was observed during prolonged incubation in no. 3 medium.     

Region of the streptococcal plasmid pMV158 required for conjugative mobilization.

The nonconjugative streptococcal plasmid pMV158 can be mobilized by the conjugative streptococcal plasmid pIP501. We determined the sequence of the 1.1-kilobase EcoRI fragment of pMV158 to complete the DNA sequence of the plasmid. We showed that an open reading frame, mob (able to encode a polypeptide of 58,020 daltons), is required for mobilization of pMV158. An intergenic region present in the EcoRI fragment contains four lengthy palindromes that are found also in one or more of the staphylococcal plasmids pT181, pE194, and pUB110. One palindromic sequence, palD, which is common to all four plasmids, also appeared to be necessary for mobilization. Circumstantial evidence indicates that this sequence contains both an oriT site and the mob promoter. The Mob protein is homologous in its amino-terminal half to Pre proteins encoded by pT181 and pE194 that were shown by others to be essential for site-specific cointegrative plasmid recombination; their main biological function may be plasmid mobilization.     

Lactobacillus hilgardii plasmid pLAB1000 consists of two functional cassettes commonly found in other gram-positive organisms.

A Lactobacillus hilgardii plasmid, pLAB1000, was studied to understand the organization of autonomous replicons from lactobacilli. Two cassettes could be identified. First, the replication region consisted of a sequence coding for a replication protein (Rep) and its corresponding target site, similar to those from plasmids pUB110, pC194 (Staphylococcus aureus), pFTB14, pBAA1 (Bacillus sp.), and pLP1 (Lactobacillus sp.). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate Rep production. The results also suggested that pLAB1000 replicates via a single-stranded DNA intermediate, and a putative lagging-strand initiation site was found that had similarities to those of alpha 3, St-1, and G4 isometric bacteriophages. The second cassette of pLAB1000 consisted of a sequence coding for a putative mobilization protein (Mob) and its corresponding RSA site. This cassette was similar to those found in pT181, pUB110, pE194 (S. aureus), and pG12 (Bacillus sp.), and it was found to be conserved among different Lactobacillus plasmid replicons. The origin and evolution of these functional cassettes are also discussed.     

Plasmid maintenance in Bacillus subtilis recombination-deficient mutants

Summary An isogenic set of 11 recombination-deficient mutant strains of Bacillus subtilis has been constructed. Whereas plasmid pUB110 is stably maintained in such Rec^- cells, the high copy number plasmid pC194 is unstable. Instability in Rec^- strains could be mostly attributed to the deleterious effect of the presence of the plasmid on the Rec^- cells' growth capability. In part, instability of pC194 derivatives could also be correlated with the presence of an unusually high amount of multimeric DNA molecules.     

Construction of plasmid cloning vectors for lactic streptococci which also replicate in Bacillus subtilis and Escherichia coli.

The cryptic Streptococcus cremoris Wg2 plasmid pWV01 (1.5 megadaltons) was genetically marked with the chloramphenicol resistance (Cmr) gene from pC194. The recombinant plasmid (pGK1, 2.4 megadaltons) replicated and expressed Cmr in Bacillus subtilis. From this plasmid an insertion-inactivation vector was constructed by inserting the erythromycin resistance (Emr) gene from pE194 cop-6. This plasmid (pGK12, 2.9 megadaltons) contained a unique BclI site in the Emr gene and unique ClaI and HpaII sites outside both resistance genes. It was stably maintained in B. subtilis at a copy number of approximately 5. pGK12 also transformed Escherichia coli competent cells to Cmr and Emr. The copy number in E. coli was about 60. Moreover, pGK12 transformed protoplasts of Streptococcus lactis. In this host both resistance genes are expressed. pGK12 is stably maintained in S. lactis at a copy number of 3.     

Construction of plasmid cloning vectors for lactic streptococci which also replicate in Bacillus subtilis and Escherichia coli

The cryptic Streptococcus cremoris Wg2 plasmid pWV01 (1.5 megadaltons) was genetically marked with the chloramphenicol resistance (Cmr) gene from pC194. The recombinant plasmid (pGK1, 2.4 megadaltons) replicated and expressed Cmr in Bacillus subtilis. From this plasmid an insertion-inactivation vector was constructed by inserting the erythromycin resistance (Emr) gene from pE194 cop-6. This plasmid (pGK12, 2.9 megadaltons) contained a unique BclI site in the Emr gene and unique ClaI and HpaII sites outside both resistance genes. It was stably maintained in B. subtilis at a copy number of approximately 5. pGK12 also transformed Escherichia coli competent cells to Cmr and Emr. The copy number in E. coli was about 60. Moreover, pGK12 transformed protoplasts of Streptococcus lactis. In this host both resistance genes are expressed. pGK12 is stably maintained in S. lactis at a copy number of 3.     

Characterization,sequence and mode of replication of plasmid pNB2 from the thermophilic bacterium Clostridium thermosaccharolyticum

The 1882-bp nucleotide sequence of the cryptic plasmid pNB2 isolated from the thermophilic bacterium Clostridium thermosaccharolyticum was determined. pNB2 DNA has very low GC content (27%) and may serve as a model for studying the modes of maintenance and replication of AT-rich DNA under conditions of thermophilic growth. The plasmid sequence revealed three open reading frames (ORFs) which would encode polypeptides of 289, 68 and 59 amino acids, respectively, and these proteins were synthesized in E. coli extracts primed with the plasmid. We found that the product of ORF289 may be initiated at the non-ATG start codon, TTG, and has similarities with the conserved motifs of Rep proteins encoded by rolling circle (RC) plasmids of the pC194/pUB110 family. Southern hybridization analysis of lysates of C. thermosaccharolyticum cells harboring pNB2 revealed single-stranded intermediates, suggesting that this plasmid is able to replicate in clostridial cells via the RC mechanism. The most significant similarities are found between pNB2 Rep protein and the Rep proteins of three RC plasmids of the pC194 family (pTB913, pBC1 and pST1) isolated from thermophilic bacteria. Comparative analysis of these Rep proteins showed that despite the significant level of divergence, these Rep proteins share a high degree of similarity in the regions of five well-known conserved domains of RC Rep proteins and fall into two groups in accordance with the similarities found in their active sites.     

Nucleotide sequence of a Bacillus pumilus gene specifying chloramphenicol acetyltransferase

Gene cat-86 of Bacillus pumilus, specifying chloramphenicol-inducible chloramphenicol acetyltransferase, was previously cloned in Bacillus subtilis on plasmid pUB110. The nucleotide sequence of cat-86 indicates that the gene encodes a protein of 220 amino acids and contains TTG as the translations-initiation codon. The proteins specified by cat-86 and the cat genes present on pC194, pC221 and Tn9 appear to share regions of amino acid sequence similarity. cat-86 is a structural gene on the B. subtilis expression plasmid pPL608. Restriction sites exist within the gene that should permit the product of inserted heterologous coding sequences to be synthesized in B. subtilis as fusion proteins.     

Comparative analysis of five related staphylococcal plasmids

The genomic organization of five small multicopy staphylococcal plasmids comprising the pT181 family has been analyzed. In addition to pT181, the family presently includes the streptomycin resistance plasmid pS194 and the chloramphenicol resistance plasmids pC221, pC223, and pUB112. Although they belong to five different incompatibility groups, the five plasmids have similar basic replicons, use the same basic copy control mechanism, and have a common structural organization. It has been demonstrated previously that pT181 and pC221 encode trans-active replication proteins (RepC and RepD, respectively) which specifically recognize the respective plasmid's origin of replication in both cases is initiated by site-specific nicking and 3' extension. The other three plasmids in this family encode similar replication proteins; 63% of the predicted amino acid residues are identical for all five and the least similar pair shows 75% identity at the amino acid level. However, despite this homology, the replication proteins and origins of replication of different members in this family did not show cross complementation in vivo. Outside of the basic replicon, which comprises about one-third of each plasmid's genome, functional organization is also conserved. The resistance determinants are all located in the same position, immediately downstream of the replication protein coding sequence, and all are transcribed in the same direction. The three chloramphenicol resistance determinants encode highly homologous chloramphenicol transacetylases which are unrelated to the tet and str gene products. Three of the five plasmids form relaxation complexes and the involved genome segments are closely related. The other two are not homologous to these three in the corresponding region, but are homologous to each other and encode a site-specific recombinase, Pre. It is suggested that the replication, resistance, and relaxation complex regions of these plasmids can be regarded as conserved segments ("cassettes") assembled in various combinations, but always with the same spatial arrangement.     

Characterization of chimeric plasmid cloning vehicles in Bacillus subtilis.

Restriction endonuclease cleavage maps of seven chimeric plasmids that may be used for molecular cloning in Bacillus subtilis are presented. These plasmids all carry multiple antibiotic resistance markers and were constructed by in vitro molecular cloning techniques. Several of the antibiotic resistance markers were shown to undergo insertional inactivation at specific restriction endonuclease sites. Kanamycin inactivation occurred at the BglII site of pUB110 derivatives, erythromycin inactivation occurred at the HpaI and BclI sites of pE194 derivatives, and streptomycin inactivation occurred at the HindIII site of pSA0501 derivatives. A stable mini-derivative of pBD12 was isolated and characterized. By using these plasmids, we identified proteins involved in plasmid-coded kanamycin and erythromycin resistance. The properties and uses of these chimeric plasmids in the further development of recombinant deoxyribonucleic acid technology in B. subtilis are discussed.