Effect of joint laxity on polyethylene wear in total knee replacement

Experimental simulator studies are frequently performed to evaluate wear behavior in total knee replacement. It is vital that the simulation conditions match the physiological situation as closely as possible. To date, few experimental wear studies have examined the effects of joint laxity on wear and joint kinematics and the absence of the anterior cruciate ligament has not been sufficiently taken into account in simulator wear studies.The aim of this study was to investigate different ligament and soft tissue models with respect to wear and kinematics.A virtual soft tissue control system was used to simulate different motion restraints in a force-controlled knee wear simulator.The application of more realistic and sophisticated ligament models that considered the absence of anterior cruciate ligament lead to a significant increase in polyethylene wear (p=0.02) and joint kinematics (p<0.01). We recommend the use of more complex ligament models to appropriately simulate the function of the human knee joint and to evaluate the wear behavior of total knee replacements. A feasible simulation model is presented.     

Effect of a flow chart on use of blood transfusions in primary total hip and knee replacement: prospective before and after study

Problem A suspected high proportion of unnecessary blood transfusions occur in patients undergoing total joint replacement.Design Prospective before and after study evaluating the impact of a one page flow chart aimed at reducing the use of blood transfusions.Setting Orthopaedic tertiary care centre in Winterthur, Switzerland. 208 patients underwent primary total joint replacement of hips or knees during the control period (October 1998 to September 1999) and 217 during the intervention period (October 1999 to September 2000).Key measures for improvement Proportion of patients receiving allogeneic blood transfusions.Strategies for change A simple one page flow chart, which summarised graphically the perioperative decision pathways for anaemic patients, was placed in all charts of patients undergoing total joint replacement and handed out to medical staff from 4 October 1999 onwards. The implementation of the flow chart focused on its endorsement by chief physicians and the development of a sense of “ownership” among physicians and nurses.Effects of change The proportion of patients receiving allogeneic blood decreased from 35.0% to 19.8% (absolute difference -15.2%, 95% confidence interval -23.3 to -7.0%). The percentage of patients donating and receiving autologous blood also decreased. This led to overall savings of about £23 000 ($42 470; €34 441) (£103.50 per patient undergoing total joint replacement). Differences became more pronounced after adjustment for confounding factors.Lessons learnt Allogeneic blood transfusions in primary hip and knee replacement surgery may be reduced cost effectively by implementing a one page flow chart. Five key elements may have contributed: simplicity; wide distribution; no requirement for major changes; endorsement by local opinion leaders; and development of a sense of ownership. These elements may be used in other contexts to achieve sustained change of clinical practice.     

Prevention of deep vein thrombosis after hip replacement: randomised comparison between unfractionated heparin and low molecular weight heparin.

OBJECTIVE--To evaluate the efficacy and safety of two subcutaneous prophylactic regimens for postoperative deep vein thrombosis after total hip replacement. DESIGN--Prospective open randomised multicentre trial. SETTING--28 European departments of orthopaedic surgery. INTERVENTION--All patients had bilateral phlebography 10 days after surgery. 31 patients receiving low molecular weight heparin and 29 receiving unfractionated heparin were excluded from the efficacy analysis for various reasons. PATIENTS--349 patients undergoing total hip replacement between September 1988 and May 1989. 174 patients received subcutaneously a low molecular weight heparin (Fraxiparine) with anti-factor Xa activity of 41 IU/kg/day for three days, then 62 IU/kg/day from day 4 to day 10. 175 patients received subcutaneous unfractionated heparin at intervals of eight hours; doses were adjusted to maintain the activated thromboplastin time at two to five seconds above control values. MAIN OUTCOME MEASURE--Total incidence of deep vein thrombosis and incidence of proximal deep vein thrombosis on bilateral phlebography. RESULTS--The total incidence of deep vein thrombosis was 16% in patients receiving unfractionated heparin and 12.6% in patients receiving low molecular weight heparin (p = 0.45), and the incidence of thrombosis of the proximal veins was 13.1% and 2.9% respectively (p less than 0.001). Four patients receiving unfractionated heparin and one receiving low molecular weight heparin developed pulmonary embolism. The incidence of bleeding complications was low and comparable in the two groups. CONCLUSION--Low molecular weight heparin is at least as effective as unfractionated heparin in preventing deep vein thrombosis and is more effective at preventing thrombosis of the proximal veins in patients undergoing hip replacement. Low molecular weight heparin is not more likely to cause bleeding complications and is simpler to give than unfractionated heparin.     

Effect of hip joint angle on concentric knee extension torque

This study tested the hypothesis that the effect of hip joint angle on concentric knee extension torque depends on knee joint angle during a single knee extension task. Twelve men performed concentric knee extensions in fully extended and 80° flexed hip positions with maximal effort. The angular velocities were set at 30° s⁻¹ and 180° s⁻¹. The peak torque and torques attained at 30°, 50°, 70° and 90° (anatomical position = 0°) of the knee joint were compared between the two hip positions. Muscle activations of the vastus lateralis, medialis, rectus femoris and biceps femoris were determined using surface electromyography. The peak torque was significantly greater in the flexed than in the extended hip position irrespective of angular velocity. The torques at 70° and 90° of the knee joint at both angular velocities and at 50° at 180° s⁻¹ were significantly greater in the flexed than in the extended hip position, whereas corresponding differences were not found at 30° (at either angular velocity) and 50° (at 30° s⁻¹) of the knee joint. No effect of hip position on muscle activation was observed in any muscle. These results supported our hypothesis and may be related to the force–length and force–velocity characteristics of the rectus femoris.     

Stress analysis of the proximo-medial femur after total hip replacement

Stress-induced bone loss in the proximo-medial femur has been identified as a factor leading to loosening in the artificial hip joint. In an effort to develop a quantitative understanding of the stress distribution that causes bone loss, axial and hoop stresses in the medial calcar of the femur have been determined after total hip replacement, using finite element stress analysis. Stress distributions for a high and a low Young's modulus prosthesis material are compared for both collared and uncollared prosthesis designs. The use of a low-modulus material, and of a collar, are predicted to be advantageous, giving rise to proximo-medial stress patterns similar to those of the normal, intact femur.     

Relation between subject-specific hip joint loading, stress distribution in the proximal femur and bone mineral density changes after total hip replacement

In the prediction of bone remodelling processes after total hip replacement (THR), modelling of the subject-specific geometry is now state-of-the-art. In this study, we demonstrate that inclusion of subject-specific loading conditions drastically influences the calculated stress distribution, and hence influences the correlation between calculated stress distributions and changes in bone mineral density (BMD) after THR.For two patients who received cementless THR, personalized finite element (FE) models of the proximal femur were generated representing the pre- and post-operative geometry. FE analyses were performed by imposing subject-specific three-dimensional hip joint contact forces as well as muscle forces calculated based on gait analysis data. Average values of the von Mises stress were calculated for relevant zones of the proximal femur. Subsequently, the load cases were interchanged and the effect on the stress distribution was evaluated. Finally, the subject-specific stress distribution was correlated to the changes in BMD at 3 and 6 months after THR.We found subject-specific differences in the stress distribution induced by specific loading conditions, as interchanging of the loading also interchanged the patterns of the stress distribution. The correlation between the calculated stress distribution and the changes in BMD were affected by the two-dimensional nature of the BMD measurement.Our results confirm the hypothesis that inclusion of subject-specific hip contact forces and muscle forces drastically influences the stress distribution in the proximal femur. In addition to patient-specific geometry, inclusion of patient-specific loading is, therefore, essential to obtain accurate input for the analysis of stress distribution after THR.     

Concentrations of trace elements in bones of the hip joint from patients after hip replacement surgery

The aim of this research was to determine the concentrations of two essential elements (copper (Cu) and zinc (Zn)) and three toxic elements (lead (Pb), cadmium (Cd) and mercury (Hg)) in the hip joint bones of patients from the Chair and Clinic of Orthopaedics and Traumatology at the Pomeranian Medical University in Szczecin. We examined 111 samples of hip joint bones obtained from patients from north-western Poland who had undergone arthroplasty of the femoral head. In cartilage with the adjacent compact bone, and in spongy bone from the examined patients, the concentrations (medians) determined were placed in the following descending sequence Zn>Pb>Cu>Cd>Hg. The concentrations ranged from 86 mg Zn/kg to 0.0020 mg Hg/kg dw. It was found that the concentration of lead in the cartilage with adjacent compact bone was higher in men than in women. In conclusion, it seems that in addition to routine monitoring of the abiotic environment, it is essential to monitor concentrations of heavy metals having a long-term impact in humans.     

Prevention of venous thromboembolism after total knee replacement by high-dose aspirin or intermittent calf and thigh compression.

A prospective study of patients undergoing total knee replacement was carried out by using a combination of 125I-fibrinogen scanning and phlebography, and showed a high incidence of venous thromboembolic disease (TE). Ventilation-perfusion lung scanning was performed to detect pulmonary emboli in most patients. High doses of aspirin and an intermittent low-pressure pneumatic compression device (IPCD) were effective, even in women, in preventing TE. Low doses of aspirin and placebo were equally ineffective in preventing TE. Lung-scan abnormalities compatible with pulmonary emboli were found in six out of 10 patients with isolated calf-vein thrombi. Conventional tests of platelet function did not predict the development of TE. No significant differences were found between the patients receiving low and high doses of aspirin with respect to the mean template bleeding time or platelet aggregation in response to adenosine diphosphate, collagen, and epinephrine, although these variables were significantly abnormal in the two groups receiving aspirin compared with those treated with placebo and the IPCD. Thus high doses of aspirin and a new low-pressure IPCD were effective in preventing venous TE in patients (predominantly women) undergoing total knee replacement.     

Effect of hip joint angle at seat-off on hip joint contact force during sit-to-stand movement: a computer simulation study

Background

Sit-to-stand movements are a necessary part of daily life, and excessive mechanical stress on the articular cartilage has been reported to encourage the progression of osteoarthritis. Although a change in hip joint angle at seat-off may affect hip joint contact force during a sit-to-stand movement, the effect is unclear. This study aimed to examine the effect of the hip joint angle at seat-off on the hip joint contact force during a sit-to-stand movement by using a computer simulation.

Methods

A musculoskeletal model was created for the computer simulation, and eight muscles were attached to each lower limb. Various sit-to-stand movements were generated using parameters (e.g., seat height and time from seat-off to standing posture) reported by previous studies. The hip joint contact force for each sit-to-stand movement was calculated. Furthermore, the effect of the hip joint angle at seat-off on the hip joint contact force during the sit-to-stand movement was examined. In this study, as the changes to the musculoskeletal model parameters affect the hip joint contact force, a sensitivity analysis was conducted.

Results and conclusions

The hip joint contact force during the sit-to-stand movement increased approximately linearly as the hip flexion angle at the seat-off increased. Moreover, the normal sit-to-stand movement and the sit-to-stand movement yielding a minimum hip joint contact force were approximately equivalent. The effect of the changes to the musculoskeletal model parameters on the main findings of this study was minimal. Thus, the main findings are robust and may help prevent the progression of hip osteoarthritis by decreasing mechanical stress, which will be explored in future studies.

     

Association between occupation and knee and hip replacement due to osteoarthritis: a case-control study

Introduction  

The objective of this study was to examine the association between occupation and osteoarthritis (OA) leading to total knee (TKR) or hip (THR) joint replacement.     

Cost-effectiveness of enoxaparin versus warfarin prophylaxis against deep-vein thrombosis after total hip replacement.

OBJECTIVE: To compare the efficacy and cost-effectiveness of enoxaparin, a low-molecular-weight heparin derivative, with that of low-dose warfarin in the prevention of deep-vein thrombosis (DVT) after total hip replacement. DATA SOURCES: English-language articles on enoxaparin and warfarin prophylaxis is patients undergoing total hip replacement published from January 1982 to December 1992. STUDY SELECTION: Four trials of enoxaparin (involving 567 patients) and six trials of warfarin (involving 630) met the following criteria: randomized controlled trial, prophylaxis started no later than 24 hours after surgery and continued for at least 7 days, warfarin dose monitored and adjusted appropriately, enoxaparin dosage 30 mg twice daily, and DVT confirmed by bilateral venography. DATA EXTRACTION: Rates of DVT, cost of prophylaxis, diagnosis and treatment per patient, rate of pulmonary embolism (PE), number of deaths and incremental cost-effectiveness (cost per life-year gained). DATA SYNTHESIS: The pooled rate of DVT was 13.6% with enoxaparin (95% confidence interval [CI] 10.9% to 16.3%) and 20.6% with warfarin (95% CI 17.4% to 23.8%). At a cost of $19.55 per day for enoxaparin the total cost per patient, including prophylaxis and management of DVT, exceeded that per patient receiving warfarin by about $121. For every 10,000 patients treated the use of enoxaparin will prevent 47 cases of DVT, 3 cases of PE and 4 deaths. Thus, the estimated incremental cost-effectiveness of enoxaparin is $29 120 per life-year gained. CONCLUSION: On the basis of current Canadian cost-effectiveness guidelines the results of this study would be considered moderate to strong evidence to adopt enoxaparin prophylaxis against DVT after total hip replacement. However, because of the limited data the estimates are uncertain. Future trials should compare enoxaparin and warfarin and incorporate a prospective economic appraisal.     

Assessment of quadriceps muscle weakness in patients after total knee arthroplasty and total hip arthroplasty: Methodological issues

The aim of this exploratory study was to verify whether the evaluation of quadriceps muscle weakness is influenced by the testing modality (isometric vs. isokinetic vs. isoinertial) and by the calculation method (within-subject vs. between-subject comparisons) in patients 4–8 months after total knee arthroplasty (TKA, n = 29) and total hip arthroplasty (THA, n = 30), and in healthy controls (n = 19). Maximal quadriceps strength was evaluated as (1) the maximal voluntary contraction (MVC) torque during an isometric contraction, (2) the peak torque during an isokinetic contraction, and (3) the one repetition maximum (1-RM) load during an isoinertial contraction. Muscle weakness was calculated as the difference between the involved and the uninvolved side (within-subject comparison) and as the difference between the involved side of patients and controls (between-subject comparison). Muscle weakness estimates were not significantly affected by the calculation method (within-subject vs. between-subject; P > 0.05), whereas a significant main effect of testing modality (P < 0.05) was observed. Isometric MVC torque provided smaller weakness estimates than isokinetic peak torque (P = 0.06) and isoinertial 1-RM load (P = 0.008), and the clinical occurrence of weakness (proportion of patients with large strength deficits) was also lower for MVC torque. These results have important implications for the evaluation of quadriceps muscle weakness in TKA and THA patients 4–8 months after surgery.     

Gait analysis in the assessment of functional performance before and after total hip replacement

A method which measures the temporal and distance factors has been employed to monitor the gait of patients one week prior to total hip replacement and at six and twelve months after operation. Variables have been selected which reflect gait symmetry and others which show the speed of walking and how this is achieved. The method of presentation of results is discussed with particular attention to the use of these results in monitoring the progress of the patient. As a group these patients showed the greatest improvement at six months after operation with little added improvement shown at twelve months.     

Effect of cup inclination on predicted contact stress-induced volumetric wear in total hip replacement

In order to increase the lifetime of the total hip endoprosthesis, it is necessary to understand mechanisms leading to its failure. In this work, we address volumetric wear of the artificial cup, in particular the effect of its inclination with respect to the vertical. Volumetric wear was calculated by using mathematical models for resultant hip force, contact stress and penetration of the prosthesis head into the cup. Relevance of the dependence of volumetric wear on inclination of the cup (its abduction angle ?_A) was assessed by the results of 95 hips with implanted endoprosthesis. Geometrical parameters obtained from standard antero-posterior radiographs were taken as input data. Volumetric wear decreases with increasing cup abduction angle ?_A. The correlation within the population of 95 hips was statistically significant (P = 0.006). Large cup abduction angle minimises predicted volumetric wear but may increase the risk for dislocation of the artificial head from the cup in the one-legged stance. Cup abduction angle and direction of the resultant hip force may compensate each other to achieve optimal position of the cup with respect to wear and dislocation in the one-legged stance for a particular patient.     

Effect of pregnancy on joint contracture in the rat knee.

As there is evidence that ligamentous laxity is affected by the female hormones, we hypothesized that hormonal changes occurring during pregnancy could have a therapeutic role in preventing the development of a joint contracture. Knee joint contractures were created in pregnant and nonpregnant rats. After 2 wk of immobilization, the degree of contracture was measured with structural properties of the medial collateral and anterior cruciate ligaments and the pubic symphysis. Although not statistically significant, there was a general trend toward reduced contracture in pregnant compared with nonpregnant rats. Cutting the posterior capsule significantly decreased contracture for both the pregnant and nonpregnant groups, confirming the contribution of capsular structures to contracture. Ultimate loads of the medial collateral and anterior cruciate ligaments significantly decreased after immobilization compared with control, but there was no significant effect due to pregnancy. Stiffness and ultimate load of the pubic symphysis were not significantly different between pregnant and nonpregnant groups. The trend toward reduced contracture with pregnancy points toward a possible therapeutic role for female hormones in the prevention of postoperative and/or posttraumatic joint contracture.     

Shoulder joint loadings in post total hip replacement surgery patients during assisted walking: The influence of the crutch setup

A crutch is prescribed to permit the patient to walk safely and independently immediately after total hip replacement (THR) surgery. Purpose of this study is to evaluate the influence of the crutch setup on upper limbs biomechanics, including shoulder joint kinematics and kinetics parameters that will be evaluated to detect possible differences related to the crutch length.Thirty patients were randomly assigned to elbow flexed (EF) or elbow extended (EE) forearm crutch setup. Subjects were asked to walk on the laboratory path, instrumented with motion tracking system and force platforms. Spatiotemporal gait parameters, crutch ground reaction force (GRF) and crutch displacement (measured as the relative distance between the crutch position on the floor and the shoulder joint center), were evaluated. A three-dimensional (3D) biomechanical model was implemented to determine shoulder joint kinematics and kinetics during crutch walking.Results showed that the stride length significantly decreased, and base of support width increased for the EF group when compared to the EE group. Crutch forces and distance to the body significantly decreased in the EE group. Furthermore, shoulder joint moments in all planes of motion, vertical and lateral forces were significantly reduced in the EE group.The present study showed that crutch setup influenced performance and upper limb loading during walking, with EE setup allowing a more stable walking and reducing stress on the shoulder joint when compared to the EF setup. Results may help therapists in rationalizing crutch length adjustments for patients after THR surgery.