Applications of topologically segregated bilayer beads in 'one-bead one-compound' combinatorial libraries.

We recently reported the use of a biphasic approach to generate topologically segregated bilayer beads. In generating 'one-bead one-compound' (OBOC) combinatorial libraries, novel encoding methods have been applied to these beads such as the testing library compound and the coding tags residing on the outer layer and inner core of each bead, respectively. In this report, we further exploit these bilayer beads by preparing target bead-libraries with low concentration of random peptides on the outer layer, and full substitution of coding peptides in the bead interior. The low concentration of peptide on the bead surface enables us to greatly increase the stringency of screening so that higher affinity ligands can easily be identified. Full substitution of the inner core of the beads enables us to have enough coding peptides inside the bead for direct microsequencing with Edman chemistry. The biphasic approach of preparing bilayer beads can be carried out at any point during the library construction. Therefore, the nonsequencable or fixed structures of the peptides can be bypassed in the coding tags. As a result, peptide libraries that otherwise cannot be sequenced can now be sequenced, and peptide segments with fixed residues within the libraries can be bypassed so that the microsequencing time can be significantly shortened. Furthermore, peptides with a branch of random sequence in the middle of a fixed peptide chain can be encoded with just the random sequence in the bead interior. We have successfully applied these novel OBOC library concepts in the optimization of cell-surface ligands for a human T-cell leukemia, Jurkat, cell line.     

One-bead, one-compound peptide library sequencing via high-pressure ammonia cleavage coupled to nanomanipulation/nanoelectrospray ionization mass spectrometry

Biological screening of one-bead, one-compound (OBOC) combinatorial peptide libraries is routinely carried out with the peptide remaining bound to the resin bead during screening. After a hit is identified, the bead is isolated, the peptide is cleaved from the bead, and its sequence is determined. We have developed a new technique for cleavage of peptides from resin beads whereby exposure of a 4-hydroxymethyl benzoic acid (HMBA)-linked peptide to high-pressure ammonia gas led to efficient cleavage in as little as 5 min. Here we also report a new method of extracting peptide from individual library beads for its introduction into a mass spectrometer that uses nanomanipulation combined with nanoelectrospray ionization mass spectrometry (NSI MS). Single beads analyzed by nanomanipulation/NSI MS were found to give identical MS results to those of bulk samples. Detection of 18 unique cleaved peptides 1 to 8 amino acids in length, and sequencing of 14 different peptide sequences 4 to 8 amino acids in length, was demonstrated on a combination of bulk samples and ones from individual beads of an OBOC library. The method was highly reproducible, with 100% of attempts to extract peptide resulting in high-quality MS data. This new collection of techniques allows rapid, reliable, environmentally responsible sequencing of hit beads from combinatorial peptide libraries.     

Screening one bead one compound libraries against serum using a flow cytometer: Determination of the minimum antibody concentration required for ligand discovery

One bead one compound (OBOC) libraries can be screened against serum samples to identify ligands to antibodies in this mixture. In this protocol, hit beads are identified by staining with a fluorescent labeled secondary antibody. When screens are conducted against two different sets of serum, antibodies, and ligands to them, can be discovered that distinguish the two populations. The application of DNA-encoding technology to OBOC libraries has allowed the use of 10?µm beads for library preparation and screening, which pass through a standard flow cytometer, allowing the fluorescent hit beads to be separated from beads displaying non-ligands easily. An important issue in using this approach for the discovery of antibody biomarkers is its analytical sensitivity. In other words, how abundant must an IgG be to allow it to be pulled out of serum in an unbiased screen using a flow cytometer? We report here a model study in which monoclonal antibodies with known ligands of varying affinities are doped into serum. We find that for antibody ligands typical of what one isolates from an unbiased combinatorial library, the target antibody must be present at 10–50?nM. True antigens, which bind with significantly higher affinity, can detect much less abundant serum antibodies.     

Synthesis and screening of support-bound combinatorial peptide libraries with free C-termini: determination of the sequence specificity of PDZ domains

Preparation of support-bound combinatorial peptide libraries with free C-termini has been challenging in the past because solid-phase peptide synthesis usually starts from the C-terminus, which must be covalently attached to the solid support. In this work, we have developed a general methodology to synthesize and screen one-bead-one-compound peptide libraries containing free C-termini. TentaGel microbeads (90 mum) were spatially segregated into outer and inner layers, and peptides were synthesized on the beads in the conventional C --> N manner, with their C-termini attached to the support through an ester linkage on the bead surface but through an amide bond in the bead interior. The surface peptides were cyclized between their N-terminal amine and a carboxyl group installed at a C-terminal linker sequence, while the internal peptides were kept in the linear form. Base hydrolysis of the ester linkage in the cyclic peptides regenerated linear peptides that contained a free alpha-carboxyl group at their C-termini but remained covalently attached to the resin via the N-termini ("inverted" peptides). An inverted peptide library containing five random residues (theoretical diversity of 3.2 x 10 (6)) was synthesized and screened for binding to four postsynaptic density-95/discs large/zona occluden-1 (PDZ) domains of sodium-hydrogen exchanger regulatory factor-1 (NHERF1) and channel-interacting PDZ domain protein (CIPP). The identity of the binding peptides was determined by sequencing the linear encoding peptides inside the bead by partial Edman degradation/mass spectrometry. Consensus recognition motifs were identified for the PDZ domains, and representative peptides were resynthesized and confirmed for binding to their cognate PDZ domains. This method should be generally applicable to all PDZ domains as well as other protein domains and enzymes that recognize the C-terminus of their target proteins.     

Discovery of high-affinity peptide ligands for vancomycin

Vancomycin, an important antibiotic against medically relevant gram-positive bacteria such as methicillin-resistant Staphylococcus aureus, exerts its antibacterial effects by binding with moderate affinity to the C-terminal Lys-D-Ala-D-Ala motif (Kaa) of the bacterial cell wall peptide precursor. Essential for Kaa binding to vancomcyin is the free-carboxyl group on the terminal D-Ala in Kaa. In efforts to identify other Kaa-based peptides which bind vancomycin with higher affinity, we utilized our one-bead-one-compound (OBOC) combinatorial library approach, a method which has been widely used to discover highly specific ligands against various receptors. In standard OBOC peptide libraries, the C-terminal end of the synthesized peptide is tethered to a solid-support/resin, however, this study reports development of a synthetic strategy for generating OBOC peptide libraries with a free D-Ala-D-Ala carboxyl end. We screened these "OBOC inverted" peptide libraries against vancomycin, and discovered a series of peptide ligands with strong consensus, which bind vancomycin. To further optimize these ligands, two highly focused Kaa-containing OBOC combinatorial peptidomimetic libraries were designed, synthesized, and screened against vancomycin under more stringent conditions. Peptidomimetic ligands which bind vancomycin with higher affinity than Kaa were identified. The dissociation constant of one of these ligands, Lys(Ac)-HOCit-Glu-Cha-Lys(3,5-dihydroxybenzoyl)-D-Ala-D-Ala (9), as determined by surface plasmon resonance, was 1.03 microM, roughly a 50-fold improvement in affinity compared to Kaa (K(D) = 50 microM).     

Identification of protein-binding peptides by direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry analysis of peptide beads selected from the screening of one bead-one peptide combinatorial libraries

A fast and inexpensive strategy for the identification of peptide ligands by direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) analysis of peptide beads screened from one bead-one peptide combinatorial libraries is herein described. Streptavidin was used as the model protein. A combinatorial library of 6561 peptides was synthesized on ChemMatrix resin by the divide-couple-recombine method. 4-Hydroxymethylbenzoic acid was used as the linker and five residues of Gly were incorporated at the C termini to increase the final peptide molecular weight. Positive control peptides with the HPQ motif and negative control peptides without the HPQ motif evidenced that the linker and the five residues of Gly have neither impaired the specific binding nor facilitated unspecific binding. After screening the library, positive beads were isolated and washed with 8M guanidine hydrochloride. The beads were sliced into two or four pieces, deposited onto the stainless steel MALDI sample plate, and treated with ammonia vapor to release the peptides. In addition, 26 beads picked at random from the library were subjected to the same treatment. All samples were analyzed by MALDI-TOF-MS and the peptides were unambiguously identified with very good reproducibility between the bead pieces, thus evidencing the good homogeneity of the bead. All sequences obtained from the screening contained HPQ.     

The segregation of inner and outer cells in porcine embryos follows a different pattern compared to the segregation in mouse embryos

The mammalian blastocyst consists of an inner cell mass (ICM) enclosed by the trophectoderm. The origin of these two cell populations lies in the segregation of inner and outer cells in the early morula. In the present study, the segregation of inner and outer cells has been studied in porcine embryos and is compared with segregation in mouse embryos. For this, nuclei of inner and outer cells were differentially labelled with two fluorochromes after partial complement-mediated lysis of the outer cells. In porcine and mouse embryos compaction and the first appearance of inner cells occur at different stages of development. In porcine embryos compaction was observed as early as the 4-cell stage, while in mouse embryos compaction occurred in the 8-cell stage. The first inner cells segregated in porcine embryos which were in the transition from four to eight cells and inner cells were added during two subsequent cell cycles. In mouse embryos inner cells segregated predominantly during the fourth cleavage division. From the results obtained we conclude that the segregation of inner and outer cells follows a different pattern in mouse and in porcine embryos.     

One-bead–one-structure combinatorial libraries

Combinatorial libraries employing the one-bead–one-compound technique are reviewed. Two distinguishing features characterize this technique. First, each compound is identified with a unique solid support, enabling facile segregation of active compounds. Second, the identity of a compound on a positively reacting bead is elucidated only after its biological relevance is established. Direct methods of structure identification (Edman degradation and mass spectroscopy) as well as indirect “coding” methods facilitating the synthesis and screening of nonpeptide libraries are discussed. Nonpeptide and “scaffold” libraries, together with a new approach for the discovery of a pentide binding motif using a “library of libraries,” are also discussed. In addition, the ability to use combinatorial libraries to optimize initially discovered leads is illustrated with examples using peptide libraries. © 1994 John Wiley & Sons, Inc.     

A simple protocol for combinatorial cyclic depsipeptide libraries sequencing by matrix‐assisted laser desorption/ionisation mass spectrometry

Short cyclic peptides have a great interest in therapeutic, diagnostic and affinity chromatography applications. The screening of ‘one‐bead‐one‐peptide’ combinatorial libraries combined with mass spectrometry (MS) is an excellent tool to find peptides with affinity for any target protein. The fragmentation patterns of cyclic peptides are quite more complex than those of their linear counterparts, and the elucidation of the resulting tandem mass spectra is rather more difficult. Here, we propose a simple protocol for combinatorial cyclic libraries synthesis and ring opening before MS analysis. In this strategy, 4‐hydroxymethylbenzoic acid, which forms a benzyl ester with the first amino acid, was used as the linker. A glycolamidic ester group was incorporated after the combinatorial positions by adding glycolic acid. The library synthesis protocol consisted in the following: (i) incorporation of Fmoc‐Asp[2‐phenylisopropyl (OPp)]‐OH to Ala‐Gly‐oxymethylbenzamide‐ChemMatrix, (ii) synthesis of the combinatorial library, (iii) assembly of a glycolic acid, (iv) couple of an Ala residue in the N‐terminal, (v) removal of OPp, (vi) peptide cyclisation through side chain Asp and N‐Ala amino terminus and (vii) removal of side chain protecting groups. In order to simultaneously open the ring and release each peptide, benzyl and glycolamidic esters were cleaved with ammonia. Peptide sequences could be deduced from the tandem mass spectra of each single bead evaluated. The strategy herein proposed is suitable for the preparation of one‐bead‐one‐cyclic depsipeptide libraries that can be easily open for its sequencing by matrix‐assisted laser desorption/ionisation MS. It employs techniques and reagents frequently used in a broad range of laboratories without special expertise in organic synthesis. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Combinatorial biocatalysis

The published applications of combinatorial biocatalysis have continued to expand at a growing rate. This is exemplified by the variety of enzyme catalysts and whole-cell catalysts used for the creation of libraries through a wide range of biocatalytic reactions, including acylation, glycosylation, halogenation, oxidation and reduction. These biocatalytic methods add the capability to perform unique chemistries or selective reactions with complex or labile reagents when integrated with classical combinatorial synthesis methods. Thus, applications towards the production of libraries de novo, the expansion of chemically derived combinatorial libraries, and the generation of novel combinatorial reagents for library synthesis can be achieved. Theoretically, these results illustrate what is already evident from nature: that complex, biologically active, structurally diverse compound libraries can be generated through the application of biocatalysis alone or in combination with classical organic synthesis approaches.     

Solid phase synthesis of mixture-based acyclic and heterocyclic small molecule combinatorial libraries from resin-bound polyamides.

The development of soluble mixture-based heterocyclic combinatorial libraries derived from amino acids and peptides is described. Starting with a "toolbox" of various chemical transformations, including alkylations, reductions, acylations, and the use of a variety of bifunctional reagents, the "libraries from libraries" concept has been expanded to encompass the development of more than fifty positional scanning combinatorial libraries each composed of tens of thousands of low molecular weight acyclic and heterocyclic compounds.     

Split-and-pool Synthesis and Characterization of Peptide Tertiary Amide Library

Peptidomimetics are great sources of protein ligands. The oligomeric nature of these compounds enables us to access large synthetic libraries on solid phase by using combinatorial chemistry. One of the most well studied classes of peptidomimetics is peptoids. Peptoids are easy to synthesize and have been shown to be proteolysis-resistant and cell-permeable. Over the past decade, many useful protein ligands have been identified through screening of peptoid libraries. However, most of the ligands identified from peptoid libraries do not display high affinity, with rare exceptions. This may be due, in part, to the lack of chiral centers and conformational constraints in peptoid molecules. Recently, we described a new synthetic route to access peptide tertiary amides (PTAs). PTAs are a superfamily of peptidomimetics that include but are not limited to peptides, peptoids and N-methylated peptides. With side chains on both α-carbon and main chain nitrogen atoms, the conformation of these molecules are greatly constrained by sterical hindrance and allylic 1,3 strain. (Figure 1) Our study suggests that these PTA molecules are highly structured in solution and can be used to identify protein ligands. We believe that these molecules can be a future source of high-affinity protein ligands. Here we describe the synthetic method combining the power of both split-and-pool and sub-monomer strategies to synthesize a sample one-bead one-compound (OBOC) library of PTAs.     

Synthesis and screening of a cyclic peptide library: discovery of small-molecule ligands against human prolactin receptor

Prolactin receptor is involved in normal lactation and reproduction; however, excessive prolactin levels can cause various reproductive disorders such as prolactinomas. Small-molecule antagonists against the human prolactin receptor (hPRLr) thus have potential clinical applications and may serve as useful molecular probes in biomedical research. In this work, we synthesized a large, support-bound cyclic peptide library (theoretical diversity of 1.2x10(7)) on 90-microm TentaGel beads and screened it against the extracellular domain of hPRLr. To facilitate hit identification, each TentaGel bead was spatially segregated into outer and inner layers, with a cyclic peptide displayed on the bead surface while the bead interior contained the corresponding linear peptide. The identity of a positive bead was revealed by sequencing the linear encoding peptide within the bead by partial Edman degradation/mass spectrometry. Screening of the library resulted in 20 hits, two of which were selected for further analysis and shown to bind to hPRLr with dissociation constants of 2-3 microM.     

An asymmetric enlargement of the monolayer surfaces mechanism of membrane fusion

A mathematical model of one of the mechanisms of membrane fusion is described. From the model, it follows that when the outer leaflet of a membrane formed of bilayer stabilizing phospholipids is enlarged over the inner leaflet, convexities are formed on the membrane surface. This asymmetric enlargement of the outer layer over the inner layer occurs when fusogenic peptides, such as cobra venom cytotoxin and bee venom melittin, interact with the outer membrane monolayer. This phenomenon facilitates not only membrane fusion, but it might also play an important role in physiological processes, such as inter- and intracellular communications and cellular motility.     

Studies of the mechanical properties and the fermentation behavior of double layer alginate–chitosan beads,using <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> entrapped cells

Double layer alginate beads coated with chitosan were constructed for the entrapment of yeast cells used in alcoholic fermentations. Several construction parameters of the beads were studied. Among these parameters were the composition of the inner and the outer layer, the initial cell loading, the concentration of chitosan in the coating solution. Improved bead behavior was noticed by the use of chitosan as a coating agent to double layer alginate beads. The mechanical strength and the stability of the beads were enhanced. The polyelectrolyte complex membrane of alginate–chitosan reduced significantly the leakage of the entrapped cells into the medium. The aim of this work was to define the optimal conditions for the construction of the double layer alginate beads coated with chitosan with the purpose of using them for the fermentation of carbohydrates. This paper is based on a presentation at the “International Congress on Bioprocesses in Food Industries – ICBF 2006” conference, Patras 2006     

From consensus sequence peptide to high affinity ligand, a "library scan" strategy

A wide variety of proteins have been shown to recognize and bind to specific amino acid sequences on other proteins. These sequences can be readily identified using combinatorial peptide libraries. However, peptides containing these preferred sequences ("consensus sequence peptides") typically display only modest affinities for the consensus sequence-binding site on the intact protein. In this report, we describe a parallel synthesis strategy that transforms consensus sequence peptides into high affinity ligands. The work described herein has focused on the Lck SH2 domain, which binds the consensus peptide acetyl-Tyr(P)-Glu-Glu-Ile-amide with a K(D) of 1.3 micrometer. We employed a strategy that creates a series of spatially focused libraries that challenge specific subsites on the target protein with a diverse array of functionality. The final lead compound identified in this study displayed a 3300-fold higher affinity for the Lck SH2 domain than the starting consensus sequence peptide.     

A generic particle-based nonradioactive homogeneous multiplex method for high-throughput screening using microvolume fluorimetry.

We have developed a novel fluorescence-based homogeneous binding assay for high-throughput screening of chemical compounds. In this assay, a Cy5- or Cy5.5-labeled ligand binds to receptor immobilized on a particle, either a bead or a cell. The resulting localized signal can be detected by a modified microvolume fluorimeter (MVF). When a molecule which competes with the labeled ligand is present, the localized fluorescence on cells or beads is reduced. Image processing software enumerates events and analyzes fluorescence intensity. We describe MVF assays for the IL-1 and IL-5 receptors. Using synthetic peptides with a range of affinities for the IL-1 receptor, we obtained IC(50) data consistent with those determined by radioligand binding assays. Because the image processing software can discriminate among events with different diameters, we were able to develop a multiplex assay, in which the IL-1R and IL-5R assays were carried out in the same well with each receptor immobilized on a different size of bead. IC(50) values generated in the multiplex assay for ligands specific to each receptor were comparable to those determined independently. Finally, similar IC(50) values were obtained in a 16-microl volume in an 864-well plate. This homogeneous, nonradioactive, miniaturizable, and multiplex-capable assay holds much promise for screening of combinatorial libraries and compound collections.     

Visco-elastic membrane tethers extracted from Escherichia coli by optical tweezers

Tethers were created between a living Escherichia coli bacterium and a bead by unspecifically attaching the bead to the outer membrane and pulling it away using optical tweezers. Upon release, the bead returned to the bacterium, thus showing the existence of an elastic tether between the bead and the bacterium. These tethers can be tens of microns long, several times the bacterial length. Using mutants expressing different parts of the outer membrane structure, we have shown that an intact core lipopolysaccharide is a necessary condition for tether formation, regardless of whether the beads were uncoated polystyrene or beads coated with lectin. A physical characterization of the tethers has been performed yielding visco-elastic tether force-extension relationships: for first pull tethers, a spring constant of 10-12 pN/μm describes the tether visco-elasticity, for subsequent pulls the spring constant decreases to 6-7 pN/μm, and typical relaxation timescales of hundreds of seconds are observed. Studies of tether stability in the presence of proteases, lipases, and amylases lead us to propose that the extracted tether is primarily composed of the asymmetric lipopolysaccharide containing bilayer of the outer membrane. This unspecific tethered attachment mechanism could be important in the initiation of bacterial adhesion.     

Bilayer balance and regulation of red cell shape changes

Discocytic human red cells undergo discocyte-echinocyte and discocytestomatocyte transformations under the action of a wide variety of lipid-soluble anionic and cationic agents respectively. These shape transformations are explained by the bilayer couple hypothesis of Sheetz and Singer to be the result of preferential distribution of the anionic agents in the outer half of the bilayer and the cationic agents in the inner half of the bilayer. We demonstrate that echinocytogenic effects indeed occur when the naturally occurring phospholipid lysophosphatidylcholine (LPC) is localized in the outer half of the bilayer, and stomatocytogenic effects occur when LPC is in the inner half. However, in contrast to the bilayer couple hypothesis, our results show that simple equivalent membrane surface area expansion on each layer is insufficient to maintain the discocytic shape and there exists a differential concentration effect of LPC on the two halves of the bilayer.     

Surface Structure of Gliding Bacteria After Freeze-Etching

Ultrastructural studies of gliding bacteria demonstrate 10- to 11-nm beads on the inner surface of the outer bilayer of Cytophaga columnaris. These were not found in Myxococcus xanthus. On treatment with glutaraldehyde and ethanol, the beads appear in linear arrays.