Effects of Temperature and Pressure on Sulfate Reduction and Anaerobic Oxidation of Methane in Hydrothermal Sediments of Guaymas Basin

Rates of sulfate reduction (SR) and anaerobic oxidation of methane (AOM) in hydrothermal deep-sea sediments from Guaymas Basin were measured at temperatures of 5 to 200°C and pressures of 1 × 10⁵, 2.2 × 10⁷, and 4.5 × 10⁷ Pa. A maximum SR of several micromoles per cubic centimeter per day was found at between 60 and 95°C and 2.2 × 10⁷ and 4.5 × 10⁷ Pa. Maximal AOM was observed at 35 to 90°C but generally accounted for less than 5% of SR.     

Protoplast transformation of Bacillus stearothermophilus NUB36 by plasmid DNA

An efficient protoplast transformation system was established for Bacillus stearothermophilus NUB3621 using thermophilic plasmid pTHT15 Tcr (4.5 kb) and mesophilic plasmid pLW05 Cmr (3 kb), a spontaneous deletion derivative of pPL401 Cmr Kmr. The efficiency of transformation of NUB3621 with pLW05 and pTHT15 was 2 x 10(7) to 4 x 10(8) transformants per micrograms DNA. The transformation frequency (transformants per regenerant) was 0.5 to 1.0. Chloramphenicol-resistant and tetracycline-resistant transformants were obtained when competent cells of Bacillus subtilis were transformed with pLW05 [2.5 x 10(5) transformants (microgram DNA)-1] and pTHT15 [1.8 x 10(5) transformants (micrograms DNA)-1], respectively. Thus, these plasmids are shuttle vectors for mesophilic and thermophilic bacilli. Plasmid pLW05 Cmr was not stably maintained in cultures growing at temperatures between 50 and 65 degrees C but the thermostable chloramphenicol acetyltransferase was active in vivo at temperatures up to 70 degrees C. In contrast, thermophilic plasmid pTHT15 Tcr was stable in cultures growing at temperatures up to 60 degrees C but the tetracycline resistance protein was relatively thermolabile at higher temperatures. The estimated copy number of pLW05 in cells of NUB3621 growing at 50, 60, and 65 degrees C was 69, 18, and 1 per chromosome equivalent, respectively. The estimated copy number of pTHT15 in cells of NUB3621 growing at 50 or 60 degrees C was about 41 to 45 per chromosome equivalent and 12 in cells growing at 65 degrees C.     

Asymmetric epoxidation of alpha-olefins having neighboring sugar chiral templates and alternating copolymerization with dicarboxylic anhydrides

Sugar-substituted epoxides 5-8 were synthesized by asymmetric epoxidation (in CH(2)Cl(2)/water) of alpha-olefins having neighboring sugars (1-4) by use of an achiral oxidant (MCPBA), in which the sugar moiety acted as a chiral template. The diastereoselectivities depend on the methylene spacer between vinyl group and carbohydrate derivatives. The methylene spacer between sugar and vinyl groups influenced the diastereoselectvity. In the case of epoxidation of 4 at 27 degrees C for 24 h, the diastereoselectivity was the highest (99/1). Copolymerizations of 5-8 with succinic anhydride were attained at 100 degrees C for 72 h to give poly(ethylene succinate) having pendant carbohydrate [poly(SAn-alt-5), M(n) = 1.4 x 10(3); poly(SAn-alt-6), M(n) = 2.2 x10(3); poly(SAn-alt-7), M(n) = 2.9 x 10(3); poly(SAn-alt-8), M(n) = 1.8 x 10(3)]. The methylene spacer between sugar and epoxide has an effect on the reactivity of epoxide in copolymerization as well as the diastereoselectivity. Alternating copolymerization of 7 and glutaric anhydride gave a polyester of M(n) 4.2 x10(3).     

Characterization of the asialoglycoprotein receptor on isolated rat hepatocytes

Rat hepatocytes, freshly isolated by a collagenase perfusion technique, bound [3H]asialo-orosomucoid in a sugar-specific and calcium-dependent manner as expected for the hepatic asialoglycoprotein receptor. At least 90% of the total cell surface-bound [3H]asialo-orosomucoid represented specific binding and could be removed by washing with EDTA. Freshly isolated cells had about 7 x 10(4) surface receptors per cell. However, when cells were incubated at 37 degrees C, the number of surface receptors per cell rapidly increased 2- to 3-fold to about 2.2 x 10(5). This increase in receptor number occurred in the absence of serum and began within minutes, depending on the particular conditions used to keep the cells in suspension. (The maximal rate of appearance of new receptors at 37 degrees C was about 70 receptors per cell per s.) When cells were first exposed to a brief EDTA treatment at 4 degrees C, before measuring the binding of [3H]asialo-orosomucoid, the number of surface receptors per cell was found to increase by about 45%. Therefore, about 30% of the surface receptors on freshly isolated cells have already bound endogenous asialoglycoproteins or are present in the membrane in a cryptic form. At 4 degrees C the binding of [3H]asialo-orosomucoid was rapid (kon greater than or equal to 1.8 x 10(4) M-1s-1), whereas the dissociation of bound [3H]asialo-orosomucoid, measured in the presence of excess nonradioactive glycoprotein, was extremely slow (koff less than or equal to 0.9 x 10(-5) s-1). The association constant calculated from these data (Ka = 2.0 x 10(9) M-1) agreed well with that obtained from equilibrium binding experiments (Ka = 2.4 x 10(9) M-1) using untreated cells or cells which had first been treated with EDTA or incubated at 37 degrees C. In all cases, when the concentration of [3H]asialo-orosomucoid was higher than about 600 ng/ml, the Scatchard plots were curvilinear. The data are, however, consistent with the conclusion that there is a single high affinity receptor on the hepatocyte surface. The additional receptors that appear on the surface when cells are incubated at 37 degrees C or exposed to EDTA are identical with those on untreated cells,     

Kinetic and morphological evidence for endocytosis of mammalian cell integrin receptors by using an anti-fibronectin receptor beta subunit monoclonal antibody

Monoclonal antibody (mAb) 7E2.2, which recognizes the beta subunit of the hamster fibronectin receptor (FnR) (Brown, P.J., and Juliano, R. L. (1988) Exp. Cell Res. 177. 303), was used to examine the distribution of and to quantify the internalization of the FnR and possibly related integrins on adherent fibroblasts. Purified 7E2.2 IgG was iodinated and used in binding and internalization studies. Binding to Chinese hamster ovary cells was saturable with a Km of 0.3 nM and an estimated total number of cell surface beta subunits at 2 x 10(5) per cell. The FnR colocalized with fibronectin at cell adhesion contact sites and also was distributed evenly over the dorsal cell surface as discrete clusters. By using a direct immunocolloidal gold approach, the FnR was not associated with coated pits at 4 degrees C until internalization followed warming of the labeled cells to 37 degrees C. A proportion of the FnRs were endocytosed with a half-time of 6.5 min and, consistent with clathrin-mediated uptake, this was sensitive to hypertonic conditions. Receptor-immunocomplexes rapidly became localized within coated pits, small diameter tubules, and peripheral endosomes but the majority remained at the cell surface. At subsaturating concentrations of bound 7E2.2, approximately one-fourth of the total cell receptor population resided intracellularly at any one moment following steady-state; however, appreciable degradation of the iodinated mAb was not detected following accumulation for 4 h at 37 degrees C. These data showed that at least a portion of the FnR are endocytosed via a receptor-mediated pathway and suggested that these receptors do not immediately enter a degradative compartment.     

Chemical modification of a xylanase from a thermotolerant Streptomyces. Evidence for essential tryptophan and cysteine residues at the active site.

Extracellular xylanase produced in submerged culture by a thermotolerant Streptomyces T7 growing at 37-50 degrees C was purified to homogeneity by chromatography on DEAE-cellulose and gel filtration on Sephadex G-50. The purified enzyme has an Mr of 20,463 and a pI of 7.8. The pH and temperature optima for the activity were 4.5-5.5 and 60 degrees C respectively. The enzyme retained 100% of its original activity on incubation at pH 5.0 for 6 days at 50 degrees C and for 11 days at 37 degrees C. The Km and Vmax. values, as determined with soluble larch-wood xylan, were 10 mg/ml and 7.6 x 10(3) mumol/min per mg of enzyme respectively. The xylanase was devoid of cellulase activity. It was completely inhibited by Hg2+ (2 x 10(-6) M). The enzyme degraded xylan, producing xylobiose, xylo-oligosaccharides and a small amount of xylose as end products, indicating that it is an endoxylanase. Chemical modification of xylanase with N-bromosuccinimide, 2-hydroxy-5-nitrobenzyl bromide and p-hydroxymercuribenzoate (PHMB) revealed that 1 mol each of tryptophan and cysteine per mol of enzyme were essential for the activity. Xylan completely protected the enzyme from inactivation by the above reagents, suggesting the presence of tryptophan and cysteine at the substrate-binding site. Inactivation of xylanase by PHMB could be restored by cysteine.     

Synthesis and biophysical evaluation of minor-groove binding C-terminus modified pyrrole and imidazole triamide analogs of distamycin

Five polyamide derivatives with rationally modified C-terminus moieties were synthesized and their DNA binding specificity and affinity determined. A convergent approach was employed to synthesize polyamides containing an alkylaminopiperazine (4 and 5), a truncated piperazine (6), or an alkyldiamino-C-terminus moiety (7 and 8) with two specific objectives: to investigate the effects of number of potential cationic centers and steric bulk at the C-terminus. CD studies confirmed that compounds 4, 5, 7, and 8 bind in the minor groove of DNA. The alkylpiperazine containing compounds (4 and 5) showed only moderate binding to DNA with DeltaT(m) values of 2.8 and 8.3 degrees C with their cognate sequence, respectively. The alkyldiamino compounds (7 and 8) were more impressive producing a DeltaT(m) of >17 and >22 degrees C, respectively. Compound 6 (truncated piperazine) did not stabilize its cognate DNA sequence. Footprints were observed for all compounds (except compound 6) with their cognate DNA sequence using DNase I footprinting, with compound 7 producing a footprint of 0.1 microM at the expected 5'-ACGCGT-3' site. SPR analysis of compound 7 binding to 5'-ACGCGT-3', 5'-ACCGGT-3', and 5'-AAATTT-3' produced binding affinities of 2.2x10(6), 3.3x10(5), and 1x10(5)M(-1), respectively, indicating a preference for its cognate sequence of 5'-ACGCGT-3'. These results are in good agreement with the footprinting data. The results indicate that steric crowding at the C-terminus is important with respect to binding. However, the number of cationic centers within the molecule may also play a role. The alkyldiamino-containing compounds (7 and 8) warrant further investigation in the field of polyamide research.     

Preparation and characterization of bio-diesels from various bio-oils

Methyl, ethyl, 2-propyl and butyl esters were prepared from canola and linseed oils through transesterification using KOH and/ or sodium alkoxides as catalysts. In addition, methyl and ethyl esters were prepared from rapeseed and sunflower oils using the same catalysts. Chemical composition of the esters was determined by HPLC for the class of lipids and by GC for fatty acid compositions. The bio-diesel esters were characterized for their physical and fuel properties including density, viscosity, iodine value, acid value, cloud point, pure point, gross heat of combustion and volatility. Methyl and ethyl esters prepared from a particular vegetable oil had similar viscosities, cloud points and pour points, whereas methyl, ethyl, 2-propyl and butyl esters derived from a particular vegetable oil had similar gross heating values. However, their densities, which were 2 7% higher than those of diesel fuels, statistically decreased in the order of methyl approximately 2-propyl > ethyl > butyl esters. Butyl esters showed reduced cloud points (-6 degrees C to -10 degrees C) and pour points (-13 degrees C to -16 degrees C) similar to those of summer diesel fuel having cloud and pour points of -8 degrees C and -15 degrees C, respectively. The viscosities of bio-diesels (3.3-7.6 x 10(-4) Pa s at 40 degrees C) were much less than those of pure oils (22.4-45.1 x 10(-4) Pa s at 40 degrees C) and were twice those of summer and winter diesel fuels (3.50 and 1.72 x 10(-4) Pa s at 40 degrees C), and their gross heat contents of approximately 40 MJ/kg were 11% less than those of diesel fuels (approximately 45 MJ/kg). For different esters from the same vegetable oil, methyl esters were the most volatile, and the volatility decreased as the alkyl group grew bulkier. However, the bio-diesels were considerably less volatile than the conventional diesel fuels.     

Unique gelation behavior of cellulose in NaOH/urea aqueous solution

A transparent cellulose solution was prepared by mixing 7 wt % NaOH with 12 wt % urea aqueous solution which was precooled to below -10 degrees C and which was able to rapidly dissolve cellulose at ambient temperature. The rheological properties and behavior of the gel-formed cellulose solution were investigated by using dynamic viscoelastic measurement. The effects of temperature, time, cellulose molecular weight, and concentrations on both the shear storage modulus (G') and the loss modulus (G") were analyzed. The cellulose solution having a viscosity-average molecular weight (M(eta)) of 11.4 x 10(4) had its sol-gel transition temperature decreased from 60.3 to 30.5 degrees C with an increase of its concentration from 3 to 5 wt %. The gelation temperature of a 4 wt % cellulose solution dropped from 59.4 to 30.5 degrees C as the M(eta) value was increased from 4.5 x 10(4) to 11.4 x 10(4). Interestingly, at either higher temperature (above 30 degrees C), or lower temperature (below -3 degrees C), or for longer gelation time, gels could form in the cellulose solutions. However, the cellulose solution remains a liquid state for a long time at the temperature range from 0 to 5 degrees C. For the first time, we revealed an irreversible gelation in the cellulose solution system. The gel having been formed did not dissolve even when cooled to the temperature of -10 degrees C, at which it was dissolved previously. Therefore, this indicates that either heating or cooling treatment could not break such stable gels. A high apparent activation energy (E(a)) of the cellulose solution below 0 degrees C was obtained and was used to explain the gel formation under the cooling process.     

Production of probiotic cabbage juice by lactic acid bacteria

Research was undertaken to determine the suitability of cabbage as a raw material for production of probiotic cabbage juice by lactic acid bacteria (Lactobacillus plantarum C3, Lactobacillus casei A4, and Lactobacillus delbrueckii D7). Cabbage juice was inoculated with a 24-h-old lactic culture and incubated at 30 degrees C. Changes in pH, acidity, sugar content, and viable cell counts during fermentation under controlled conditions were monitored. L. casei, L. delbrueckii, and L. plantarum grew well on cabbage juice and reached nearly 10x10(8) CFU/mL after 48 h of fermentation at 30 degrees C. L. casei, however, produced a smaller amount of titratable acidity expressed as lactic acid than L. delbrueckii or L. plantarum. After 4 weeks of cold storage at 4 degrees C, the viable cell counts of L. plantarum and L. delbrueckii were still 4.1x10(7) and 4.5x10(5) mL(-1), respectively. L. casei did not survive the low pH and high acidity conditions in fermented cabbage juice and lost cell viability completely after 2 weeks of cold storage at 4 degrees C. Fermented cabbage juice could serve as a healthy beverage for vegetarians and lactose-allergic consumers.     

The elastase inhibitors of swine serum: isolation and partial characterization of the beta 1-globulin inhibitor and its interaction with elastase

1. The principal elastase inhibitor of swine serum, a beta 1-globulin, has been isolated from serum by ammonium sulfate fractionation, DEAE-cellulose column chromatography and chromatofocusing. 2. The purified beta 1-globulin was homogeneous by immunoelectrophoresis and sodium dodecyl sulfate polyacrylamide gel electrophoresis. Multiple zones (isoinhibitors) were produced on anionic polyacrylamide gels. The mol. wt for the native, elastase-inactivated inhibitor and the beta 1-globulin-elastase complex were respectively, 65,467 and 60,000 and 79,667. The amino acid residue weight was 63,331. 4. The electrophoretic mobilities of the native inhibitor, elastase-inactivated inhibitor and the inhibitor-elastase complex were respectively, -3.4, -3.8 and -2.2 x 10(-5) cm2/V per sec, the isoelectric points were respectively, 4.78-5.28 (major pIs = 5.15, 5.35), 4.63-5.35 (major pI = 5.13) and 6.02-6.2 (major pI = 6.12). 5. The first order dissociation rate constant for the beta 1-globulin-elastase complex (two-fold molar excess of elastase at 37 degrees C) was 1.9 x 10(-3) per sec with complete dissociation in 40.4 min. The dissociation constant for the complex was 1.47 x 10(-7) M. One mol of elastase was bound per mol of the inhibitor. 6. The beta 1-globulin-elastase complex reacts with antibody to either protein moiety.     

Effect of temperature on bacterial species diversity in thermophilic solid-waste composting

Continuously thermophilic composting was examined with a 4.5-liter reactor placed in an incubator maintained at representative temperatures. Feed was a mixture of dried table scraps and shredded newspaper wetted to 55% moisture. One run at 49 degrees C (run A) employed a 1:4 feed-to-compost ratio, while the other runs used a 10:1 ratio and were incubated at 50, 55, 60, or 65 degrees C. Due to self-heating, internal temperatures of the composting mass were 0 to 7 degrees C hotter than the incubator. Two full-scale composting plants (at Altoona, Pa., and Leicester, England) were also examined. Plate counts per gram (dry weight) on Trypticase soy broth (BBL Microbiology Systems) with 2% agar ranged from 0.7 X 10(9) to 5.3 X 10(9) for laboratory composting and 0.02 X 10(9) to 7.4 X 10(9) for field composting. Fifteen taxa were isolated, including 10 of genus Bacillus, which dominated all samples except that from run A. Species diversity decreased markedly in laboratory composting at 60 degrees C and above, but was similar for the three runs incubated at 49, 50, and 55 degrees C. The maximum desirable composting temperature based on species diversity is thus 60 degrees C, the same as that previously recommended based on measures of the rate of decomposition.     

Effect of temperature on bacterial species diversity in thermophilic solid-waste composting.

Continuously thermophilic composting was examined with a 4.5-liter reactor placed in an incubator maintained at representative temperatures. Feed was a mixture of dried table scraps and shredded newspaper wetted to 55% moisture. One run at 49 degrees C (run A) employed a 1:4 feed-to-compost ratio, while the other runs used a 10:1 ratio and were incubated at 50, 55, 60, or 65 degrees C. Due to self-heating, internal temperatures of the composting mass were 0 to 7 degrees C hotter than the incubator. Two full-scale composting plants (at Altoona, Pa., and Leicester, England) were also examined. Plate counts per gram (dry weight) on Trypticase soy broth (BBL Microbiology Systems) with 2% agar ranged from 0.7 X 10(9) to 5.3 X 10(9) for laboratory composting and 0.02 X 10(9) to 7.4 X 10(9) for field composting. Fifteen taxa were isolated, including 10 of genus Bacillus, which dominated all samples except that from run A. Species diversity decreased markedly in laboratory composting at 60 degrees C and above, but was similar for the three runs incubated at 49, 50, and 55 degrees C. The maximum desirable composting temperature based on species diversity is thus 60 degrees C, the same as that previously recommended based on measures of the rate of decomposition.     

Characterization and kinetics of 45 kDa chitosanase from Bacillus sp. P16

An extracellular 45 kDa endochitosanase was purified and characterized from the culture supernatant of Bacillus sp. P16. The purified enzyme showed an optimum pH of 5.5 and optimum temperature of 60 degrees C, and was stable between pH 4.5-10.0 and under 50 degrees C. The Km and Vmax were measured with a chitosan of a D.A. of 20.2% as 0.52 mg/ml and 7.71 x 10(-6) mol/sec/mg protein, respectively. The enzyme did not degrade chitin, cellulose, or starch. The chitosanase digested partially N-acetylated chitosans, with maximum activity for 15-30% and lesser activity for 0-15% acetylated chitosan. The chitosanase rapidly reduced the viscosity of chitosan solutions at a very early stage of reaction, suggesting the endotype of cleavage in polymeric chitosan chains. The chitosanase hydrolyzed (GlcN)7 in an endo-splitting manner producing a mixture of (GlcN)(2-5). Time course studies showed a decrease in the rate of substrate degradation from (GlcN)7 to (GlcN)6 to (GlcN)5, as indicated by the apparent first order rate constants, k1 values, of 4.98 x 10(-4), 2.3 x 10(-4), and 9.3 x 10(-6) sec(-1), respectively. The enzyme hardly catalyzed degradation of chitooligomers smaller than the pentamer.     

Agmatine oxidation by copper amine oxidase.

The product of agmatine oxidation catalyzed by Pisum sativum L. copper amine oxidase has been identified by means of one- and two-dimensional (1)H-NMR spectroscopy to be N-amidino-2-hydroxypyrrolidine. This compound inhibits competitively rat nitric oxide synthase type I and type II (NOS-I and NOS-II, respectively) and bovine trypsin (trypsin) activity, values of Ki being (1.1 +/- 0.1) x 10(-5) m (at pH 7.5 and 37.0 degrees C), (2.1 +/- 0.1) x 10(-5) m (at pH 7.5 and 37.0 degrees C), and (8.9 +/- 0.4) x 10(-5) m (at pH 6.8 and 21.0 degrees C), respectively. Remarkably, the affinity of N-amidino-2-hydroxypyrrolidine for NOS-I, NOS-II and trypsin is significantly higher than that observed for agmatine and clonidine binding. Furthermore, N-amidino-2-hydroxypyrrolidine and agmatine are more efficient than clonidine in displacing [(3)H]clonidine (= 1.0 x 10(-8) m) from specific binding sites in heart rat membranes, values of IC50 being (1.3 +/- 0.4) x 10(-9) m and (2.2 +/- 0.4) x 10(-8) m, respectively (at pH 7.4 and 37.0 degrees C).     

Polycondensation of dicarboxylic acids and diols in water catalyzed by surfactant-combined catalysts and successive chain extension

Direct dehydration polycondensation of dicarboxylic acids and alcohols was carried out by surfactant-combined Br?nsted and Lewis acids. This procedure did not require the removal of water, because the esterification was established at the interface of the emulsion in water. Emulsion polycondensations of 1,9-nonanediol (1,9-ND) and dodecanedioic acid (DDA) (the molar ratio of dicarboxylic acid to diol = 1:1) were carried out at 80 degrees C for 48 h in the presence of 16 wt % DBSA. The corresponding polyester (M(w) = 10.1 x 10(3)) was obtained in an excellent yield (99%). Chain extension in the emulsion was carried out using hexamethylene diisocyanate as the chain extender. SEC measurements indicated the expected shift to higher molecular weight region (M(w) = 11.4 x 10(3), M(w)/M(n) = 3.4) compared with parent polyester (M(w) = 4.5 x 10(3), M(w)/M(n) = 2.2).     

Aminoacyl-tRNA synthetases from Bacillus stearothermophilus. Asymmetry of substrate binding to tyrosyl-tRNA synthetase.

The interaction of L-tyrosine, L-tyrosyladenylate and tRNA-Tyr with tyrosyl-tRNA synthetase from Bacillus stearothermophilus was studied by equilibrium dialysis, gel filtration and fluorescence spectroscopy. The enzyme, which consists of two identical subunits (mol. wt 2 x 44000), binds only a single molecule of L-tyrosine per dimer with a K-d of 2 x 10-5 M at pH 7.8 and 23 degrees C. The tyrosyl-tRNA synthetase--tyrosyladenylate complex which was isolated by gel filtration also has one adenylate bound per dimeric enzyme molecule. In contrast, two tRNA-Tyr molecules bind per enzyme dimer, but the two binding sites are not equivalent having K-d values of 2 x 10-7 M and 1.3 x 10-6 M respectively at pH 6.5 and 25 degrees C. Since crystallographic analysis of the free enzyme [2] shows that the monomer is the asymmetric unit, the data indicate that substrate binding induces asymmetry in the enzyme.     

Role of skin blood flow and sweating rate in exercise thermoregulation after bed rest.

Two potential mechanisms, reduced skin blood flow (SBF) and sweating rate (SR), may be responsible for elevated intestinal temperature (T(in)) during exercise after bed rest and spaceflight. Seven men underwent 13 days of 6 degrees head-down bed rest. Pre- and post-bed rest, subjects completed supine submaximal cycle ergometry (20 min at 40% and 20 min at 65% of pre-bed rest supine peak exercise capacity) in a thermoneutral room. After bed rest, T(in) was elevated at rest (+0.31 +/- 0.12 degrees C) and at the end of exercise (+0.33 +/- 0.07 degrees C). Percent increase in SBF during exercise was less after bed rest (211 +/- 53 vs. 96 +/- 31%; P < or = 0.05), SBF/T(in) threshold was greater (37.09 +/- 0.16 vs. 37.33 +/- 0.13 degrees C; P < or = 0.05), and slope of SBF/T(in) tended to be reduced (536 +/- 184 vs. 201 +/- 46%/ degrees C; P = 0.08). SR/T(in) threshold was delayed (37.06 +/- 0.11 vs. 37.34 +/- 0.06 degrees C; P < or = 0.05), but the slope of SR/T(in) (3.45 +/- 1.22 vs. 2.58 +/- 0.71 mg x min-1 x cm-2 x degrees C-1) and total sweat loss (0.42 +/- 0.06 vs. 0.44 +/- 0.08 kg) were not changed. The higher resting and exercise T(in) and delayed onset of SBF and SR suggest a centrally mediated elevation in the thermoregulatory set point during bed rest exposure.     

Genome plasticity in Festuca arundinacea: direct response to temperature changes by redundancy modulation of interspersed DNA repeats

The response of the genome of Festuca arundinacea seedlings to changes in the temperature at which they were grown was investigated. Fifteen repeated sequences in the nuclear DNA were isolated and hybridized to the genomic DNA of seedlings grown at 10 degrees C or 30 degrees C. The redundancies of sequences recognized by four probes ( FaA5, FaH8, FaH13 and FaH14), were found to differ significantly in the two DNAs. DNA sequences recognized by FaH8, FaH13 and FaH14 were more represented in the genome of the 30 degrees C-raised seedlings than in the genome of the 10 degrees C-raised seedlings (76.5 x 10(3), 1.9 x 10(3), and 111.8 x 10(3) copies per haploid, 1C genome vs 62.7 x 10(3), 1.3 x 10(3), and 80.8 x 10(3) copies, respectively). In contrast, FaA5-related sequences were more represented in the genome of seedlings grown at the lower temperature (15.5 x 10(3) vs 10.2 x 10(3) copies, respectively). Southern-blot hybridization of these repeats to digested genomic DNA produced patterns which indicated that the probe sequences were part of longer repeated sequences having a limited degree of structural heterogeneity. These patterns were partly different when the probes were hybridized to the DNA from seedlings grown at 10 degrees C or 30 degrees C. In situ hybridization showed that the DNA sequences recognized by each probe were scattered along the length of all the chromosomes, with preferential location of FaA5- and FaH13-related sequences at given, mainly centromeric, regions of certain chromosomes. These findings suggest that redundancy modulations of interspersed repeated sequences allow direct responses of the genome of F. arundinacea to changes in environmental temperature.     

Interaction between ricin and Zajdela ascitic hepatoma cells

The binding to and toxicity of ricin on Zajdela hepatoma ascites cells were studied. The kinetic analysis of [125I]-ricin binding to hepatoma cells indicated that maximal specific binding was reached within 30 min. at 4 degrees C and 60 min. at 25 degrees C and that toxin binding to hepatoma cells was saturable. When the binding data were plotted according to the method of Scatchard, curvilinear graphs were obtained suggesting that hepatoma cells have both high and low affinity receptors for ricin. The number of high and low affinity receptors was identical at 4 and 25 degrees C, i.e., 8 x 10(5) and 1.2 x 10(7) sites per cell respectively. However, the capacity of hepatoma cells to bind ricin is stronger at 4 degrees C than at 25 degrees C. The toxic activity of ricin was totally abolished in the presence of lactose suggesting that ricin binding to cells occurs through binding sites containing galactosyl residues.