The most pathogenic transthyretin variant, L55P, forms amyloid fibrils under acidic conditions and protofilaments under physiological conditions.

The L55P transthyretin (TTR) familial amyloid polyneuropathy-associated variant is distinct from the other TTR variants studied to date and the wild-type protein in that the L55P tetramer can dissociate to the monomeric amyloidogenic intermediate and form fibril precursors under physiological conditions (pH 7.0, 37 degrees C). The activation barrier associated with L55P-TTR tetramer dissociation is lower than the barrier for wild-type transthyretin dissociation, which does not form fibrils under physiological conditions. The L55P-TTR tetramer is also very sensitive to acidic conditions, readily dissociating to form the monomeric amyloidogenic intermediate between pH 5.5-5.0 where the wild-type TTR adopts a nonamyloidogenic tetrameric structure. The formation of the L55P monomeric amyloidogenic intermediate involves subtle tertiary structural changes within the beta-sheet rich subunit as discerned from Trp fluorescence, circular dichroism analysis, and ANS binding studies. The assembly of the L55P-TTR amyloidogenic intermediate at physiological pH (pH 7.5) affords protofilaments that elongate with time. TEM studies suggest that the entropic barrier associated with filament assembly (amyloid fibril formation) is high in vitro, amyloid being defined by the laterally assembled four filament structure observed by Blake upon isolation of "fibrils" from the eye of a FAP patient. The L55P-TTR protofilaments formed in vitro bind Congo red and thioflavin T (albeit more weakly than the fibrils produced at acidic pH), suggesting that the structure observed probably represents an amyloid precursor. The structural continuum from misfolded monomer through protofilaments, filaments, and ultimately fibrils must be considered as a possible source of pathology associated with these diseases.     

Association of thin filaments into thick filaments revealing the structural hierarchy of amyloid fibrils

Beta2-Microglobulin (beta2-m) is a major structural component of dialysis-related amyloid fibrils. Kozhukh et al. [J. Biol. Chem. 277 (2002) 1310] prepared a series of peptide fragments of beta2-m by the protease digestion and examined their ability to form amyloid fibrils in citrate buffer at pH 2.5. Among various peptides, a 22-residue K3 peptide corresponding to Ser20-Lys41 spontaneously formed amyloid fibrils in aqueous solution. This peptide also formed amyloid protofibrils in 20% (v/v) 2,2,2-trifluoroethanol (TFE). To investigate the influence of solvent conditions on fibril formation, we studied their structures by atomic force microscopy. In aqueous solution, fibrils had a diameter of 4 or 8 nm and tended to cluster each other. On the other hand, protofibrils in 20% (v/v) TFE had a diameter of 2 nm with no tendency of clustering. Intriguingly, when the K3 protofibrils were transferred from 20% (v/v) TFE to aqueous solution, some of them associated to form thicker fibrils with a diameter of 4-15 nm and a left-handed helical twist. TFE is a hydrophobic solvent, so that hydrophobic interactions between molecules may be weakened. The results suggest that the fibrils in aqueous conditions are formed by the cooperative association of protofibrils at the growing ends of the fibrils, in which hydrophobic interactions play a major role.     

Transthyretin fibrillogenesis entails the assembly of monomers: a molecular model for in vitro assembled transthyretin amyloid-like fibrils

Extracellular accumulation of transthyretin (TTR) variants in the form of fibrillar amyloid deposits is the pathological hallmark of familial amyloidotic polyneuropathy (FAP). The TTR Leu55Pro variant occurs in the most aggressive forms of this disease. Inhibition of TTR wild-type (WT) and particularly TTR Leu55Pro fibril formation is of interest as a potential therapeutic strategy and requires a thorough understanding of the fibril assembly mechanism. To this end, we report on the in vitro assembly properties as observed by transmission electron microscopy (TEM), atomic force microscopy (AFM) and quantitative scanning transmission electron microscopy (STEM) for both TTR WT fibrils produced by acidification, and TTR Leu55Pro fibrils assembled at physiological pH. The morphological features and dimensions of TTR WT and TTR Leu55Pro fibrils were similar, with up to 300 nm long, 8 nm wide fibrils being the most prominent species in both cases. Other species were evident; 4-5 nm wide fibrils, 9-10 nm wide fibrils and oligomers of various sizes. STEM mass-per-length (MPL) measurements revealed discrete fibril types with masses of 9.5 and 14.0(+/-1.4) KDa/nm for TTR WT fibrils and 13.7, 18.5 and 23.2(+/-1.5) kDa/nm for TTR Leu55Pro fibrils. These MPL values are consistent with a model in which fibrillar TTR structures are composed of two, three, four or five elementary protofilaments, with each protofilament being a vertical stack of structurally modified TTR monomers assembled with the 2.9 nm axial monomer-monomer spacing indicated by X-ray fibre diffraction data. Ex vivo TTR amyloid fibrils were examined. From their morphological appearance compared to these, the in vitro assembled TTR WT and Leu55Pro fibrils examined may represent immature fibrillar species. The in vitro system operating at physiological pH for TTR Leu55Pro and the model presented for the molecular arrangement of TTR monomers within fibrils may, therefore, describe early fibril assembly events in vivo.     

Noncore residues influence the kinetics of functional TTR(105-115)-based amyloid fibril assembly

Mutations in the polypeptide sequence that forms the core structure of amyloid fibrils are known to impact on fibril assembly and stability but the effect of changes on noncore residues, particularly relating to functionalized fibrils where the fibril core is preserved, has not been systematically examined. In this study, the short peptide sequence TTR(105-115) (also known as TTR1) and the functionalized variants TTR1-RGD and TTR1-RAD are used as a model system to investigate the effect of noncore residues on the kinetics of fibril assembly. The noncore residues in TTR1-RGD and TTR1-RAD influence the rate of fibril assembly in non-seeded samples with the glycine residue at position 15 increasing the rate of aggregation compared to alanine. Mature TTR1-RGD fibrils were also found to fragment more readily, indicating possible differences in mechanical properties. Fragments of each type of fibril are capable of self- and cross-seeding, generating fibrils with a highly similar cross-β core structure. The similar rates of assembly observed for self-seeded samples reflect the similar free energy of elongation calculated for these peptides, while the morphology of cross-seeded fibrils is determined by the properties of the monomeric peptide and its macromolecular arrangement within the protofilaments and fibrils. These findings illustrate that noncore residues impact on fibril formation and fibril properties and demonstrate that the influence of noncore residues should be considered when designing sequences for the production of self-assembling functional fibrillar materials.     

Solution conditions can promote formation of either amyloid protofilaments or mature fibrils from the HypF N-terminal domain

The HypF N-terminal domain has been found to convert readily from its native globular conformation into protein aggregates with the characteristics of amyloid fibrils associated with a variety of human diseases. This conversion was achieved by incubation at acidic pH or in the presence of moderate concentrations of trifluoroethanol. Electron microscopy showed that the fibrils grown in the presence of trifluoroethanol were predominantly 3-5 nm and 7-9 nm in width, whereas fibrils of 7-9 nm and 12-20 nm in width prevailed in samples incubated at acidic pH. These results indicate that the assembly of protofilaments or narrow fibrils into mature amyloid fibrils is guided by interactions between hydrophobic residues that may remain exposed on the surface of individual protofilaments. Therefore, formation and isolation of individual protofilaments appears facilitated under conditions that favor the destabilization of hydrophobic interactions, such as in the presence of trifluoroethanol.     

Tuning β-sheet peptide self-assembly and hydrogelation behavior by modification of sequence hydrophobicity and aromaticity

Peptide self-assembly leading to cross-β amyloid structures is a widely studied phenomenon because of its role in amyloid pathology and the exploitation of amyloid as a functional biomaterial. The self-assembly process is governed by hydrogen bonding, hydrophobic, aromatic π-π, and electrostatic Coulombic interactions. A role for aromatic π-π interactions in peptide self-assembly leading to amyloid has been proposed, but the relative contributions of π-π versus general hydrophobic interactions in these processes are poorly understood. The Ac-(XKXK)(2)-NH(2) peptide was used to study the contributions of aromatic and hydrophobic interactions to peptide self-assembly. Position X was globally replaced by valine (Val), isoleucine (Ile), phenylalanine (Phe), pentafluorophenylalanine (F(5)-Phe), and cyclohexylalanine (Cha). At low pH, these peptides remain monomeric because of repulsion of charged lysine (Lys) residues. Increasing the solvent ionic strength to shield repulsive charge-charge interactions between protonated Lys residues facilitated cross-β fibril formation. It was generally found that as peptide hydrophobicity increased, the required ionic strength to induce self-assembly decreased. At [NaCl] ranging from 0 to 1000 mM, the Val sequence failed to assemble. Assembly of the Phe sequence commenced at 700 mM NaCl and at 300 mM NaCl for the less hydrophobic Ile variant, even though it displayed a mixture of random coil and β-sheet secondary structures over all NaCl concentrations. β-Sheet formation for F(5)-Phe and Cha sequences was observed at only 20 and 60 mM NaCl, respectively. Whereas self-assembly propensity generally correlated to peptide hydrophobicity and not aromatic character the presence of aromatic amino acids imparted unique properties to fibrils derived from these peptides. Nonaromatic peptides formed fibrils of 3-15 nm in diameter, whereas aromatic peptides formed nanotape or nanoribbon architectures of 3-7 nm widths. In addition, all peptides formed fibrillar hydrogels at sufficient peptide concentrations, but nonaromatic peptides formed weak gels, whereas aromatic peptides formed rigid gels. These findings clarify the influence of aromatic amino acids on peptide self-assembly processes and illuminate design principles for the inclusion of aromatic amino acids in amyloid-derived biomaterials.     

Amyloid protofilaments from the calcium-binding protein equine lysozyme: formation of ring and linear structures depends on pH and metal ion concentration

The calcium-binding equine lysozyme has been found to undergo conversion into amyloid fibrils during incubation in solution at acidic pH. At pH 4.5 and 57 degrees C, where equine lysozyme forms a partially unfolded molten globule state, the protein forms protofilaments with a width of ca. 2 nm. In the absence of Ca(2+) the protofilaments are present as annular structures with a diameter of 40-50 nm. In the presence of 10 mM CaCl(2) the protofilaments of equine lysozyme are straight or curved; they can assemble into thicker threads, but they do not appear to undergo circularisation. At pH 2.0, where the protein is more destabilised compared to pH 4.5, fibril formation occurs at 37 degrees C and 57 degrees C. At pH 2.0, both ring-shaped and linear protofilaments are formed, in which periodic repeats of ca 35 nm can be distinguished clearly. The rings constitute about 10% of all fibrillar species under these conditions and they are characterised by a larger diameter of 70-80 nm. All the structures bind Congo red and thioflavine T in a manner similar to fibrils associated with a variety of amyloid diseases. At pH 2.0, fibril formation is accompanied by some acidic hydrolysis, producing specific fragmentation of the protein, leading to the accumulation of two peptides in particular, consisting of residues 1-80 and 54-125. At the initial stages of incubation, however, full-length equine lysozyme represents the dominant species within the fibrils. We propose that the ring-shaped structures observed here, and in the case of disease-associated proteins such as alpha-synuclein, could be a second generic type of amyloid structure in addition to the more common linear fibrils.     

Mechanical unbinding of abeta peptides from amyloid fibrils

Using the experimental structures of Abeta amyloid fibrils and all-atom molecular dynamics, we study the force-induced unbinding of Abeta peptides from the fibril. We show that the mechanical dissociation of Abeta peptides is highly anisotropic and proceeds via different pathways when force is applied in parallel or perpendicular direction with respect to the fibril axis. The threshold forces associated with lateral unbinding of Abeta peptides exceed those observed during the mechanical dissociation along the fibril axis. In addition, Abeta fibrils are found to be brittle in the lateral direction of unbinding and soft along the fibril axis. Lateral mechanical unbinding and the unbinding along the fibril axis load different types of fibril interactions. Lateral unbinding is primarily determined by the cooperative rupture of fibril backbone hydrogen bonds. The unbinding along the fibril axis largely depends on the interpeptide Lys-Asp electrostatic contacts and the hydrophobic interactions formed by the Abeta C terminal. Due to universality of the amyloid beta structure, the anisotropic mechanical dissociation observed for Abeta fibrils is likely to be applicable to other amyloid assemblies. The estimates of equilibrium forces required to dissociate Abeta peptide from the amyloid fibril suggest that these supramolecular structures are mechanically stronger than most protein domains.     

Ultrastructural organization of amyloid fibrils by atomic force microscopy

Atomic force microscopy has been employed to investigate the structural organization of amyloid fibrils produced in vitro from three very different polypeptide sequences. The systems investigated are a 10-residue peptide derived from the sequence of transthyretin, the 90-residue SH3 domain of bovine phosphatidylinositol-3'-kinase, and human wild-type lysozyme, a 130-residue protein containing four disulfide bridges. The results demonstrate distinct similarities between the structures formed by the different classes of fibrils despite the contrasting nature of the polypeptide species involved. SH3 and lysozyme fibrils consist typically of four protofilaments, exhibiting a left-handed twist along the fibril axis. The substructure of TTR(10-19) fibrils is not resolved by atomic force microscopy and their uniform appearance is suggestive of a regular self-association of very thin filaments. We propose that the exact number and orientation of protofilaments within amyloid fibrils is dictated by packing of the regions of the polypeptide chains that are not directly involved in formation of the cross-beta core of the fibrils. The results obtained for these proteins, none of which is directly associated with any human disease, are closely similar to those of disease-related amyloid fibrils, supporting the concept that amyloid is a generic structure of polypeptide chains. The detailed architecture of an individual fibril, however, depends on the manner in which the protofilaments assemble into the fibrillar structure, which in turn is dependent on the sequence of the polypeptide and the conditions under which the fibril is formed.     

Effect of the beta-sheet-breaker peptide LPFFD on oriented network of amyloid β25-35 fibrils

Amyloid fibrils are self-associating filamentous structures deposited in extracellular tissue in various neurodegenerative and protein misfolding disorders. It has been shown that beta-sheet-breaker (BSB) peptides may interfere with amyloid fibril assembly. Although BSB peptides are prospective therapeutic agents in amyloidosis, there is ambiguity about the mechanisms and generality of their action. In the present work we analyzed the effect of the BSB peptide LPFFD on the growth kinetics, morphologic, and mechanical properties of amyloid β25-35 (Aβ25-35) fibrils assembled in an oriented array on mica surface. Aβ25-35 is thought to represent the biologically active, toxic fragment of the full-length Aβ peptide. Growth kinetics and morphologic features were analyzed using in situ atomic force microscopy in the presence of various concentrations of LPFFD. We found that the addition of LPFFD only slightly altered the assembly kinetics of Aβ25-35 fibrils. Already formed fibrils did not disassemble in the presence of high concentrations of LPFFD. The mechanical stability of the fibrils was explored with force spectroscopy methods. The nanomechanical behavior of Aβ25-35 fibrils is characterized by the appearance of force staircases which correspond to the force-driven unzipping and dissociation of several protofilaments. In the presence of LPFFD single-plateau force traces dominated. The effects of LPFFD on Aβ25-35 fibril assembly and stability suggest that inter-protofilament interactions were slightly weakened. Complete disassembly of fibrils, however, was not observed. Thus, under the conditions explored here, LPFFD may not be considered as a BSB peptide with generalized beta-sheet breaking properties.     

Molecular dynamics simulations of a fibrillogenic peptide derived from apolipoprotein C-II

The pathway to amyloid fibril formation in proteins involves specific structural changes leading to the combination of misfolded intermediates into oligomeric assemblies. Recent NMR studies showed the presence of “turns” in amyloid peptides, indicating that turn formation may play an important role in the nucleation of the intramolecular folding and possible assembly of amyloid. Fully solvated all-atom molecular dynamics simulations were used to study the structure and dynamics of the apolipoprotein C-II peptide 56 to 76, associated with the formation of amyloid fibrils. The peptide populated an ensemble of turn structures, stabilized by hydrogen bonds and hydrophobic interactions enabling the formation of a strong hydrophobic core which may provide the conditions required to initiate aggregation. Two competing mechanisms discussed in the literature were observed. This has implications in understanding the mechanism of amyloid formation in not only apoC-II and its fragments, but also in other amyloidogenic peptides.     

Dissociation of Abeta(16-22) amyloid fibrils probed by molecular dynamics

The mechanisms of deposition and dissociation are implicated in the assembly of amyloid fibrils. To investigate the kinetics of unbinding of Abeta(16-22) monomers from preformed fibrils, we use molecular dynamics (MD) simulations and the structures for Abeta(16-22) amyloid fibrils. Consistent with experimental studies, the dissociation of Abeta(16-22) peptides involves two main stages, locked and docked, after which peptides unbind. The lifetime of the locked state, in which a peptide retains fibril-like structure and interactions, extends up to 0.5 micros under normal physiological conditions. Upon cooperative rupture of all fibril-like hydrogen bonds (HBs) with the fibril, a peptide enters a docked state. This state is populated by disordered random coil conformations and its lifetime ranges from approximately 10 to 200 ns. The docked state is stabilized by hydrophobic side chain interactions, while the contribution from HBs is small. Our simulations also suggest that the peptides located on fibril edges may form stable beta-strand conformations distinct from the fibril "bulk". We propose that such edge peptides can act as fibril caps, which impede fibril elongation. Our results indicate that the interactions between unbinding peptides constitute the molecular basis for cooperativity of peptide dissociation. The kinetics of fibril growth is reconstructed from unbinding assuming the reversibility of deposition/dissociation pathways. The relation of in silica dissociation kinetics to experimental observations is discussed.     

Transient formation of nano-crystalline structures during fibrillation of an Abeta-like peptide

During the first few minutes of fibrillation of a 14-residue peptide homologous to the hydrophobic C-terminal part of the Abeta-peptide, EM micrographs reveal small crystalline areas (100 to 150 nm, repeating unit 47 A) scattered in more amorphous material. On a longer time scale, these crystalline areas disappear and are replaced by tangled clusters resembling protofilaments (hours), and eventually by more regular amyloid fibrils of 60 A to 120 A diameter (days). The transient population of the crystalline areas indicates the presence of ordered substructures in the early fibrillation process, the diameter of which matches the length of the 14-mer peptide in an extended beta-strand conformation.     

A general model for amyloid fibril assembly based on morphological studies using atomic force microscopy

Based on atomic force microscopy analysis of the morphology of fibrillar species formed during fibrillation of alpha-synuclein, insulin, and the B1 domain of protein G, a previously described model for the assembly of amyloid fibrils of immunoglobulin light-chain variable domains is proposed as a general model for the assembly of protein fibrils. For all of the proteins studied, we observed two or three fibrillar species that vary in diameter. The smallest, protofilaments, have a uniform height, whereas the larger species, protofibrils and fibrils, have morphologies that are indicative of multiple protofilaments intertwining. In all cases, protofilaments intertwine to form protofibrils, and protofibrils intertwine to form fibrils. We propose that the hierarchical assembly model describes a general mechanism of assembly for all amyloid fibrils.     

Search for intermediate structures in transthyretin fibrillogenesis: soluble tetrameric Tyr78Phe TTR expresses a specific epitope present only in amyloid fibrils

Familial Amyloidotic Polyneuropathy (FAP) is caused by the assembly of TTR into an insoluble beta-sheet. The TTR tetramer is thought to dissociate into monomeric intermediates and subsequently polymerise into the pathogenic amyloid form. The biochemical mechanism behind this transformation is unknown. We characterised intermediate TTR structures in the in vitro amyloidogenesis pathway by destabilising the AB loop through substitution of residue 78. Changes at this residue, should destabilise the TTR tetrameric fold, based on the known crystallographic structure of a Leu55Pro transthyretin variant. We generated a soluble tetrameric form of TTR that is recognised by a monoclonal antibody, previously reported to react only with highly amyloidogenic mutant proteins lacking the tetrameric native fold and with amyloid fibrils. BIAcore system analysis showed that Tyr78Phe had similar binding properties as synthetic fibrils. The affinity of this interaction was 10(7) M(-1). We suggest that the tetrameric structure of Tyr78Phe is altered due to the loosening of the AB loops of the tetramer, leading to a structure that might represent an early intermediate in the fibrillogenesis pathway.     

Flow-induced alignment of amyloid protofilaments revealed by linear dichroism

Amyloid fibrils underlying various serious amyloidoses including Alzheimer and prion diseases form characteristic deposits in which linear fibrils with an unbranched and rigid morphology associate laterally or radially, e.g. radial senile amyloid plaques of amyloid beta. To clarify the formation of these high order amyloid deposits, studying the rheology is important. A 22-residue K3 peptide fragment of beta2-microglobulin, a protein responsible for dialysis-related amyloidosis, forms long and homogeneous protofilament-like fibrils in 20% (v/v) 2,2,2-trifluoroethanol and 10 mM HCl (pH approximately 2). Here, using circular dichroism and linear dichroism, we observed the flow-induced alignment of fibrils. Analysis of far- and near-UV linear dichroism spectra suggested that both the net pi-pi* transition moment of the backbone carbonyl group and L(b) transition moment of the Tyr(26) side chain are oriented in parallel to the fibril axis, revealing the structural details of amyloid protofilaments. Moreover, the intensities of flow-induced circular dichroism or linear dichroism signals depended critically on the length and type of fibrils, suggesting that they are useful for detecting and characterizing amyloid fibrils.     

Role of different regions of alpha-synuclein in the assembly of fibrils

Elucidating the details of the assembly of amyloid fibrils is a key step to understanding the mechanism of amyloid deposition diseases including Parkinson's disease. Although several models have been proposed, based on analyses of polypeptides and short peptides, a detailed understanding of the structure and mechanism of alpha-synuclein fibrillation remains elusive. In this study, we used trypsin and endoproteinase GluC to digest intact alpha-synuclein fibrils and to analyze the detailed morphology of the resultant fibrils/remnants. We also created three mutants of alpha-synuclein, in which the N-terminal and C-terminal regions were removed, both individually and in combination, and investigated the detailed morphology of the fibrils from these mutants. Our results indicate that the assembly of mature alpha-synuclein fibrils is hierarchical: protofilaments --> protofibrils --> mature fibrils. There is a core region of approximately 70 amino acids, from residues approximately 32 to 102, which comprises the beta-rich core of the protofilaments and fibrils. In contrast, the two terminal regions show no evidence of participating in the assembly of the protofilament core but play a key role in the interactions between the protofilaments, which is necessary for the fibril maturation.     

The folding transition state of the cold shock protein is strongly polarized

It has been shown recently that an 11-residue peptide fragment of transthyretin, TTR(105-115), can form amyloid fibrils in vitro by adopting an extended beta-strand conformation. We used molecular dynamics simulations on systems of TTR(105-115) peptides, for a total length of about 5 micros, to explore the process of self-assembly and the structures of the resulting aggregates. Our results suggest that an antiparallel association of the beta-strands is more probable than a parallel one and that the central residues (T106-L111) in a beta-strand have a high propensity to form inter-peptide hydrogen bonds. The study of the dynamics of self-association indicated that, for this peptide, trajectories leading to conformations with high alpha-helical content are off-pathway from those leading to aggregates with high beta-structure content. We also show that the diverse oligomeric structures that form spontaneously in the molecular dynamics simulations are, to a large extent, compatible with solid-state NMR experimental measurements, including chemical shifts, on fully formed fibrils. The strategy that we present may therefore be used in the design of new experiments to determine the structure of amyloid fibrils, such as those involving site-specific isotope labelling schemes to measure key inter-atomic distances.     

Detection and characterization of aggregates, prefibrillar amyloidogenic oligomers, and protofibrils using fluorescence spectroscopy

Transthyretin (TTR) is a protein linked to a number of different amyloid diseases including senile systemic amyloidosis and familial amyloidotic polyneuropathy. The transient nature of oligomeric intermediates of misfolded TTR that later mature into fibrillar aggregates makes them hard to study, and methods to study these species are sparse. In this work we explore a novel pathway for generation of prefibrillar aggregates of TTR, which provides important insight into TTR misfolding. Prefibrillar amyloidogenic oligomers and protofibrils of misfolded TTR were generated in vitro through induction of the molten globule type A-state from acid unfolded TTR through the addition of NaCl. The aggregation process produced fairly monodisperse oligomers (300-500 kD) within 2 h that matured after 20 h into larger spherical clusters (30-50 nm in diameter) and protofibrils as shown by transmission electron microscopy. Further maturation of the aggregates showed shrinkage of the spheres as the fibrils grew in length, suggesting a conformational change of the spheres into more rigid structures. The structural and physicochemical characteristics of the aggregates were investigated using fluorescence, circular dichroism, chemical cross-linking, and transmission electron microscopy. The fluorescent dyes 1-anilinonaphthalene-8-sulfonate (ANS), 4-4-bis-1-phenylamino-8-naphthalene sulfonate (Bis-ANS), 4-(dicyanovinyl)-julolidine (DCVJ), and thioflavin T (ThT) were employed in both static and kinetic assays to characterize these oligomeric and protofibrillar states using both steady-state and time-resolved fluorescence techniques. DCVJ, a molecular rotor, was employed for the first time for studies of an amyloidogenic process and is shown useful for detection of the early steps of the oligomerization process. DCVJ bound to the early prefibrillar oligomers (300-500 kD) with an apparent dissociation constant of 1.6 muM, which was slightly better than for ThT (6.8 muM). Time-resolved fluorescence anisotropy decay of ANS was shown to be a useful tool for giving further structural and kinetic information of the oligomeric aggregates. ThT dramatically increases its fluorescence quantum yield when bound to amyloid fibrils; however, the mechanism behind this property is unknown. Data from this work suggest that unbound ThT is also intrinsically quenched and functions similarly to a molecular rotor, which in combination with its environmental dependence provides a blue shift to the characteristic 482 nm wavelength when bound to amyloid fibrils.     

The protofilament substructure of amyloid fibrils

Tissue deposition of normally soluble proteins, or their fragments, as insoluble amyloid fibrils causes the usually fatal, acquired and hereditary systemic amyloidoses and is associated with the pathology of Alzheimer's disease, type 2 diabetes and the transmissible spongiform encephalopathies. Although each type of amyloidosis is characterised by a specific amyloid fibril protein, the deposits share pathognomonic histochemical properties and the structural morphology of all amyloid fibrils is very similar. We have previously demonstrated that transthyretin amyloid fibrils contain four constituent protofilaments packed in a square array. Here, we have used cross-correlation techniques to average electron microscopy images of multiple cross-sections in order to reconstruct the sub-structure of ex vivo amyloid fibrils composed of amyloid A protein, monoclonal immunoglobulin lambda light chain, Leu60Arg variant apolipoprotein AI, and Asp67His variant lysozyme, as well as synthetic fibrils derived from a ten-residue peptide corresponding to the A-strand of transthyretin. All the fibrils had an electron-lucent core but the packing arrangement comprised five or six protofilaments rather than four. The structural similarity that defines amyloid fibres thus exists principally at the level of beta-sheet folding of the polypeptides within the protofilament, while the different types vary in the supramolecular assembly of their protofilaments.