Organization of the human genes for insulin-like growth factors I and II

Recently, we have reported the isolation of cDNAs encoding the precursors of insulin-like growth factors I and II (IGF-I and II) [(1983) Nature 306, 609-611; (1985) FEBS Lett. 179, 243-246. These cDNAs were employed as specific probes to detect and isolate the corresponding genes from human cosmid DNA libraries. Three cosmids were detected, together containing the entire cDNA sequence of IGF-I, and one cosmid containing the sequence of IGF-II cDNA. Southern blot hybridization, physical mapping and nucleotide sequence analysis of these cosmids revealed that the IGF-I and -II genes have a discontinous structure. The IGF-I gene contains at least four exons spanning a region of probably more that 45 kilobasepairs (kb), while the IGF-II gene consists of at least five exons, spanning a region of 16 kb.     

Subtraction of cap-trapped full-length cDNA libraries to select rare transcripts

The normalization and subtraction of highly expressed cDNAs from relatively large tissues before cloning dramatically enhanced the gene discovery by sequencing for the mouse full-length cDNA encyclopedia, but these methods have not been suitable for limited RNA materials. To normalize and subtract full-length cDNA libraries derived from limited quantities of total RNA, here we report a method to subtract plasmid libraries excised from size-unbiased amplified lambda phage cDNA libraries that avoids heavily biasing steps such as PCR and plasmid library amplification. The proportion of full-length cDNAs and the gene discovery rate are high, and library diversity can be validated by in silico randomization.     

Expression sequence tag-specific full-length cDNA cloning: actin cDNAs

Current strategies for cDNA cloning are based on construction of cDNA libraries and colony screening. The process of obtaining a full-length cDNA clone can be highly time and labor intensive. Using the human actin gene as a model target cDNA, we have developed an RNA-capture method for rapid cloning of full-length cDNAs. The approach involves the capture of mRNA with expressed sequence tag (EST)-derived, biotin labeled antisense "capture" primers and streptavidin-coated magnetic beads. Full-length cDNA is then synthesized from purified EST-specific mRNA and cloned directly into plasmid vectors. The results of using beta-actin-based capture primers on cytoplasmic RNA were the isolation of both beta- and gamma-actin cDNA clones. Of the 16 actin-specific cDNA clones analyzed, 15 (93%) were full-length. This approach for cloning full-length cDNAs from available ESTs or partial cDNA sequences will facilitate a more rapid and efficient characterization of gene structure and function.     

cDNA sequences of Torpedo marmorata acetylcholinesterase: primary structure of the precursor of a catalytic subunit; existence of multiple 5''-untranslated regions.

cDNA clones coding for a catalytic subunit of acetylcholinesterase were isolated from cDNA libraries constructed from Torpedo marmorata electric organ. The nucleotide sequence of the cloned cDNAs codes for a 599-amino acid precursor containing a 24-amino acid signal peptide. This primary structure has been compared with the sequences of Torpedo californica and Drosophila melanogasta acetylcholinesterases, and with that of human butyrylcholinesterase. Genomic blot experiments carried out with cDNA restriction fragments used as hybridization probes are in agreement with the existence of a single gene coding for the different catalytic subunits of Torpedo acetylcholinesterase. Unexpectedly, we observed multiple 5'-untranslated regions, which may contain several initiation codons.     

Selection of Drosophila genes encoding secreted and membrane proteins

With the use of a yeast-based signal sequence trap (YSST) method, we screened a Drosophila cDNA library to isolate genes encoding secreted and membrane proteins. Of the 136 unique cDNA clones sequenced, 11 clones (8.1%) are identical to previously known Drosophila genes, 18 clones (13.2%) are homologous to other genes identified in various organisms, and 91 clones (66.9%) are novel. Most of these genes are secreted or membrane proteins, or appear to contain putative signal sequences at their amino termini. This indicates that YSST is an effective tool for the isolation and analysis of Drosophila genes that play roles in intercellular communication.     

The use of direct cDNA selection to rapidly and effectively identify genes in the fungus Aspergillus fumigatus

Aspergillus fumigatus is one of the causes of invasive lung disease in immunocompromised individuals. To rapidly identify genes in this fungus, including potential targets for chemotherapy, diagnostics, and vaccine development, we constructed cDNA libraries. We began with non-normalized libraries, then to improve this approach we constructed a normalized cDNA library using direct cDNA selection. Normalization resulted in a reduction of the frequency of clones with highly expressed genes and an enrichment of underrepresented cDNAs. Expressed sequence tags generated from both the original and the normalized libraries were compared with the genomes of Saccharomyces cerevisiae, Schizosaccharomyces pombe, and Candida albicans, indicating that a large proportion of A. fumigatus genes do not have orthologs in these fungal species. This method allowed the expeditious identification of genes in a fungal pathogen. The same approach can be applied to other human or plant pathogens to rapidly identify genes without the need for genomic sequence information.     

Size-selection of cDNA libraries for the cloning of cDNAs after suppression subtractive hybridization

Here we describe the establishment of size-selected cDNA libraries for the cloning of full-length cDNAs that were initially identified by suppression subtractive hybridization (SSH) technology as being differentially expressed. First, the SSH-cDNA fragments were used as 32P-probes to verify their level and differential pattern of expression by virtual Northern and to establish their corresponding full-length cDNA size. Second, cDNAs were separated by size on agarose gels and used to construct size-selected cDNA plasmid libraries, which were then screened by colony hybridization with the SSH-cDNA fragments. We conclude that the described approach complements SSH technology by allowing efficient cloning and characterization of the corresponding full-length cDNA from any desired cell type or species. This approach will give researchers the ability to specifically target and study differentially expressed genes in an efficient manner for functional genomic studies.     

A simple and efficient procedure for generating stable expression libraries by cDNA cloning in a retroviral vector.

cDNA expression cloning is a powerful method for the rescue and identification of genes that are able to confer a readily identifiable phenotype on specific cell types. Retroviral vectors provide several advantages over DNA-mediated gene transfer for the introduction of expression libraries into eukaryotic cells since they can be used to express genes in a wide range of cell types, including those that form important experimental systems such as the hemopoietic system. We describe here a straightforward and efficient method for generating expression libraries by using a murine retroviral vector. Essentially, the method involves the directional cloning of cDNA into the retroviral vector and the generation of pools of stable ecotropic virus producing cells from this DNA. The cells so derived constitute the library, and the virus they yield is used to infect appropriate target cells for subsequent functional screening. We have demonstrated the feasibility of this procedure by constructing several large retroviral libraries (10(5) to 10(6) individual clones) and then using one of these libraries to isolate cDNAs for interleukin-3 and granulocyte-macrophage colony-stimulating factor on the basis of the ability of these factors to confer autonomous growth on the factor-dependent hemopoietic cell line FDC-P1. Moreover, the frequency at which these factor-independent clones were isolated approximated the frequency at which they were represented in the original plasmid library. These results suggest that expression cloning with retroviruses is a practical and efficient procedure and should be a valuable method for the isolation of important regulatory genes.     

A spectrum of genes expressed during early stages of rice panicle and flower development

To unravel gene expression patterns during rice inflorescence development, particularly at early stages of panicle and floral organ specification, we have characterized random cloned cDNAs from developmental-stage-specific libraries. cDNA libraries were constructed from rice panicles at the stage of branching and flower primordia specification or from panicles undergoing floral organogenesis. Partial sequence analysis and expression patterns of some of these random cDNA clones from these two rice panicle libraries are presented. Sequence comparisons with known DNA sequences in databases reveal that approximately sixtyeight per cent of these expressed rice genes show varying degrees of similarity to genes in other species with assigned functions. In contrast, thirtytwo per cent represent uncharacterized genes. cDNAs reported here code for potential rice homologues of housekeeping molecules, regulators of gene expression, and signal transduction molecules. They comprise both single-copy and multicopy genes, and genes expressed differentially, both spatially and temporally, during rice plant development. New rice cDNAs requiring specific mention are those with similarity toCOP1, a regulator of photomorphogenesis inArabidopsis; sequence-specific DNA binding plant proteins like AP2-domain-containing factors; genes that specify positional information in shoot meristems like leucine-rich-repeat-containing receptor kinases; regulators of chromatin structure like Polycomb domain protein; and also proteins induced by abiotic stresses.     

47个早期人胚胎低丰度表达基因ESTs筛选及结果分析

构建高质量ｃＤＮＡ文库在基因克隆、ｍＲＮＡ差异展示、表达序列标签测序和基因定位等研究中具有十分重要的作用。为了从早期胚胎中分离人类新基因,构建了受精后３周龄的人ｃＤＮＡ文库,用标记的一链ｃＤＮＡ探针对该文库的６５０８个克隆子进行菌落原位杂交,得到１６７７个无任何杂交信号的低丰度表达克隆子,从中随机挑选了４７个进行５′端部分测序,将测序结果与三大基因库进行序列同源性比较,发现１８个克隆（３８．３％）     

Selective enrichment of cDNAs from salt-stress-induced genes in the wheatgrass, Lophopyrum elongatum, by the formamide-phenol emulsion reassociation technique

We present a novel technique for the enrichment of cDNA libraries to enhance the abundance of clones of differentially expressed genes. The technique is relatively simple, requires moderate quantities of poly(A) + RNA and results in preferential enrichment of clones derived from mRNAs that were of low abundance in their original population. This method was used to isolate cDNA clones of salt-stress-induced genes in the roots of Lophopyrum elongatum, a highly salt-tolerant wheatgrass. An excess of sonicated plasmid DNA from a cDNA library from nonstressed roots was hybridized in a formamide-phenol emulsion with inserts from a cDNA library of stressed roots. Clones that were more abundant in, or were unique to, the library of the stressed roots were recovered as double-stranded fragments by virtue of reconstituted restriction-enzyme-digested ends by ligating them to a plasmid vector. The resulting enriched library was screened by differential colony hybridization and clones of eleven different genes that were more strongly expressed in stressed roots than in controls were selected.     

DNA sequence-based "bar codes" for tracking the origins of expressed sequence tags from a maize cDNA library constructed using multiple mRNA sources

To enhance gene discovery, expressed sequence tag (EST) projects often make use of cDNA libraries produced using diverse mixtures of mRNAs. As such, expression data are lost because the origins of the resulting ESTs cannot be determined. Alternatively, multiple libraries can be prepared, each from a more restricted source of mRNAs. Although this approach allows the origins of ESTs to be determined, it requires the production of multiple libraries. A hybrid approach is reported here. A cDNA library was prepared using 21 different pools of maize (Zea mays) mRNAs. DNA sequence "bar codes" were added during first-strand cDNA synthesis to uniquely identify the mRNA source pool from which individual cDNAs were derived. Using a decoding algorithm that included error correction, it was possible to identify the source mRNA pool of more than 97% of the ESTs. The frequency at which a bar code is represented in an EST contig should be proportional to the abundance of the corresponding mRNA in the source pool. Consistent with this, all ESTs derived from several genes (zein and adh1) that are known to be exclusively expressed in kernels or preferentially expressed under anaerobic conditions, respectively, were exclusively tagged with bar codes associated with mRNA pools prepared from kernel and anaerobically treated seedlings, respectively. Hence, by allowing for the retention of expression data, the bar coding of cDNA libraries can enhance the value of EST projects.