A DNA unwinding element and an ARS consensus comprise a replication origin within a yeast chromosome.

We have defined a replication origin, ORI305, within chromosome III of Saccharomyces cerevisiae by means of mutational analysis. cis-acting elements required for origin activity in the chromosome, as assayed by two-dimensional gel electrophoresis of replication intermediates, are the same as those required for the function of an autonomously replicating sequence, ARS305, in a plasmid. Essential elements include (i) an 11 bp sequence that is a near match to the ARS consensus and (ii) a broad sequence directly 3' to the consensus near match. Origin function is inactivated by point mutations in the essential near match sequence, suggesting that the sequence contributes to specifying the origin in the chromosome. Other consensus near matches with different sequences are present but are not required. The essential 3'-flanking sequence exhibits DNA helical instability and is sensitive to deletion mutations that stabilize the DNA helix. The wild-type 3'-flanking sequence can be functionally substituted by dissimilar sequences that also exhibit helical instability. The requirement for DNA helical instability indicates that the essential 3'-flanking sequence serves as a DNA unwinding element in the chromosome.     

Ease of DNA unwinding is a conserved property of yeast replication origins.

Autonomously replicating sequence (ARS) elements function as plasmid replication origins. Our studies of the H4 ARS and ARS307 have established the requirement for a DNA unwinding element (DUE), a broad easily-unwound sequence 3' to the essential consensus that likely facilitates opening of the origin. In this report, we examine the intrinsic ease of unwinding a variety of ARS elements using (1) a single-strand-specific nuclease to probe for DNA unwinding in a negatively-supercoiled plasmid, and (2) a computer program that calculates DNA helical stability from the nucleotide sequence. ARS elements that are associated with replication origins on chromosome III are nuclease hypersensitive, and the helical stability minima correctly predict the location and hierarchy of the hypersensitive sites. All well-studied ARS elements in which the essential consensus sequence has been identified by mutational analysis contain a 100-bp region of low helical stability immediately 3' to the consensus, as do ARS elements created by mutation within the prokaryotic M13 vector. The level of helical stability is, in all cases, below that of ARS307 derivatives inactivated by mutations in the DUE. Our findings indicate that the ease of DNA unwinding at the broad region directly 3' to the ARS consensus is a conserved property of yeast replication origins.     

Reversion of autonomously replicating sequence mutations in Saccharomyces cerevisiae: creation of a eucaryotic replication origin within procaryotic vector DNA.

To investigate how a defective replicon might acquire replication competence, we have studied the reversion of autonomously replicating sequence (ARS) mutations. By mutagenesis of a Saccharomyces cerevisiae plasmid lacking a functional origin of replication, we have obtained a series of cis-acting mutations which confer ARS activity on the plasmid. The original plasmid contained an ARS element inactivated by point mutation, but surprisingly only 1 of the 10 independent Ars+ revertants obtained shows a back mutation in this element. In the remainder of the revertants, sequence changes in the M13 vector DNA generate new ARSs. In two cases, a single nucleotide change results in an improved match to the ARS consensus, while six other cases show small duplications of vector sequence creating additional matches to the ARS consensus. These results suggest that changes in replication origin distribution may arise de novo by point mutation rather than by transposition of preexisting origin sequences.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Gene A protein cleavage of recombinant plasmids containing the phi X174 replication origin

Synthetic oligonucleotides, DNA ligase and DNA polymerase were used to construct double-stranded DNA fragments homologous to the first 25, 27 or 30 b.p. of the origin of replication of bacteriophage phi X174 (nucleotides 4299-4328 of the phi X174 DNA sequence). The double-stranded DNA fragments were cloned into the unique SmaI or HindIII restriction sites in the kanamycin-resistance gene of pACYC177 (AmpR, KmR). Recombinant plasmids were picked up by colony hybridization. DNA sequencing showed that not only recombinant plasmids with the expected insert were formed, but also recombinant plasmids with a shorter insert. Recombinant plasmids with an insert homologous to the first 24, 25, 26, 27, 28 or all 30 b.p. of the phi X174 origin region were thus obtained. Supercoiled plasmids containing a sequence homologous to the first 27, 28 or 30 b.p. of the phi X174 origin region are nicked by the phi X174 gene A protein. However, the other supercoiled plasmids are not nicked by the phi X174 gene A protein. These results show that the first 27 b.p. of the phi X174 origin region are sufficient as well as required for the initiation step in phi X174 RF DNA replication, i.e. the cleavage by gene A protein.     

Physical mapping of the genes for three components of the mouse DNA replication complex: polymerase alpha to the X chromosome, primase p49 subunit to chromosome 10, and primase p58 subunit to chromosome 1

DNA polymerase alpha and primase are two key enzymatic components of the eukaryotic DNA replication complex. In situ hybridization of cloned cDNAs for mouse DNA polymerase alpha and for the two subunits of mouse primase has been utilized to physically map these genes in the mouse genome. The DNA polymerase alpha gene (Pola) was mapped to the mouse X chromosome in region C-D. The gene encoding the p58 subunit of primase (Prim2) was located to mouse chromosome 1 in region A5-B and the p49 subunit gene (Prim1) was found to be on mouse chromosome 10 in the distal part of band D that is close to the telomere. Current knowledge of mouse and human conserved chromosomal regions along with the findings presented here lead to predictions of where the genes for the DNA primase subunits may be found in the human genome: the p58 subunit gene may be on human chromosome 2 and the p49 subunit gene on human chromosome 12. The mapping of Pola to region C-D of the mouse X chromosome adds a new marker in a conserved region between the mouse X chromosome and region Xp21-22.1 of the human X chromosome.     

DNA sequences which support activities of the bacteriophage phi X174 gene A protein

The DNA sequence of 30 nucleotides which surrounds the origin of viral strand DNA replication is highly conserved amongst the icosahedral single-stranded DNA bacteriophages. The A gene of these phages encodes a protein which is required for initiation and termination of viral strand DNA synthesis and acts as a nicking-closing activity specifically within this 30-nucleotide sequence. A system of purified Escherichia coli host proteins and phi X174 gene A protein has been developed which specifically replicates in vitro the viral strand of phi X174 from RF (replicative form) I template DNA and yields single-stranded circular DNA products (RF leads to SS(c) DNA replication system). Recombinant plasmids carrying inserts derived from phage phi X174 or G4 DNA which range in length from 49 to 1175 base pairs and contain the 30-nucleotide conserved sequence have been shown to support phi X A protein-dependent DNA synthesis in vitro in this replication system. We report here that insertion of the 30-nucleotide sequence alone into pBR322 allows the resulting recombinant plasmids to support phi X A protein-dependent in vitro DNA synthesis as efficiently as phi X174 template DNA in the RF leads to SS(c) replication system. The 30-nucleotide sequence functions as a fully wild type DNA replication origin as determined by the rate of DNA synthesis and the structure of resulting DNA products. Furthermore, the DNA sequence requirements for nicking of RF I DNA by the phi X A protein and for supporting replication origin function have been partially separated. Homology to positions 1, 29, and 30 of the 30-nucleotide conserved sequence are not required for cleavage of RF I DNA by the A protein; homology to position 1 but not 29 or 30 is required for efficient DNA replication.     

Multiple DNA elements in ARS305 determine replication origin activity in a yeast chromosome.

A yeast autonomously replicating sequence, ARS305, shares essential components with a chromosome III replicator, ORI305. Known components include an ARS consensus sequence (ACS) element, presumed to bind the origin recognition complex (ORC), and a broad 3'-flanking sequence which contains a DNA unwinding element. Here linker substitution mutagenesis of ARS305 and analysis of plasmid mitotic stability identified three short sequence elements within the broad 3'-flanking sequence. The major functional element resides directly 3' of the ACS and the two remaining elements reside further downstream, all within non-conserved ARS sequences. To determine the contribution of the elements to replication origin function in the chromosome, selected linker mutations were transplaced into the ORI305 locus and two-dimensional gel electrophoresis was used to analyze replication bubble formation and fork directions. Mutation of the major functional element identified in the plasmid mitotic stability assay inactivated replication origin function in the chromosome. Mutation of each of the two remaining elements diminished both plasmid ARS and chromosomal origin activities to similar levels. Thus multiple DNA elements identified in the plasmid ARS are determinants of replication origin function in the natural context of the chromosome. Comparison with two other genetically defined chromosomal replicators reveals a conservation of functional elements known to bind ORC, but no two replicators are identical in the arrangement of elements downstream of ORC binding elements or in the extent of functional sequences adjacent to the ACS.     

Effect of SSB protein on cleavage of single-stranded DNA by phi X gene A protein and A* protein.

Gene A protein of bacteriophage phi X174 plays a role as a site-specific endonuclease in the initiation and termination of phi X rolling circle DNA replication. To clarify the sequence requirements of this protein we have studied the cleavage of single-stranded restriction fragments from phi X and G4 viral DNAs using purified gene A protein. The results show that in both viral DNAs cleavage occurs at the origin and at one additional site which shows striking sequence homology with the origin region. During rolling circle replication the single-stranded viral DNA tail is covered with single-stranded DNA binding (SSB) protein. Therefore, we have also studied the effect of SSB on phi X gene A protein cleavage. In these conditions only single-stranded fragments containing the complete or almost complete origin region of 30 bases are cleaved, whereas cleavage at the additional sites of phi X or G4 viral DNAs does not occur. A model for termination of rolling circle replication which is based on these findings is presented. Finally, we present evidence that the second product of gene A, the A* protein, cleaves phi X viral DNA at the additional cleavage site in the presence of SSB, not only in vitro but also in vivo. The functional significance of this cleavage in vivo is discussed.     

Duplications of the X chromosome in males: evidence that most parts of the X chromosome can be active in two copies

Summary We have analysed two duplications of the X chromosome in male patients using chromosome replication and DNA methylation patterns as determinants of the functional status of the duplicated segments. In both cases, the large duplicated regions, Xq12-q22 and Xq26.3-qter, were not inactivated. A review of previously reported male cases revealed that these duplications were also not subject to inactivation. Taken together, the examined duplications cover almost the entire X chromosome except the pericentromeric region and Xq25–26. Thus, most regions of the X chromosome can be present in two functional copies without lethal consequences.     

Human gamma X satellite DNA: an X chromosome specific centromeric DNA sequence

The cosmid clone, CX16-2D12, was previously localized to the centromeric region of the human X chromosome and shown to lack human X-specific satellite DNA. A 1.2 kb EcoRI fragment was subcloned from the CX16-2D12 cosmid and was named 2D12/E2. DNA sequencing revealed that this 1,205 bp fragment consisted of approximately five tandemly repeated DNA monomers of 220 bp. DNA sequence homology between the monomers of 2D12/E2 ranged from 72.8% to 78.6%. Interestingly, DNA sequence analysis of the 2D12/E2 clone displayed a change in monomer unit orientation between nucleotide positions 585–586 from a tail-to-head arrangement to a head-to-tail configuration. This may reflect the existence of at least one inversion within this repetitive DNA array in the centromeric region of the human X chromosome. The DNA consensus sequence derived from a compilation of these 220 bp monomers had approximately 62% DNA sequence similarity to the previously determined 8 satellite DNA consensus sequence. Comparison of the 2D12/E2 and 8 consensus sequences revealed a 20 bp DNA sequence that was well conserved in both DNA consensus sequences. Slot-blot analysis revealed that this repetitive DNA sequence comprises approximately 0.015% of the human genome, similar to that found with 8 satellite DNA. These observations suggest that this satellite DNA clone is derived from a subfamily of satellite DNA and is thus designated X satellite DNA. When genomic DNA from six unrelated males and two unrelated females was cut with SstI or HpaI and separated by pulsed-field gel electrophoresis, no restriction fragment length polymorphisms were observed for either X (2D12/E2) or 8 (50E4) probes. Fluorescence in situ hybridization localized the 2D12/E2 clone to the lateral sides of the primary constriction specifically on the human X chromosome.     

Phi X 174 gene A protein does not cleave at a mouse mitochondrial DNA sequence homologous to the phi X and G4 cleavage site

The light strand origin of replication of mouse mitochondrial DNA contains a 30-nucleotide region which is 60% homologous to the 30-nucleotide conserved sequence in φX174 and G4 viral DNAs known to contain the viral gene A protein cleavage site. Gene A protein does not cleave closed circular mouse mitochondrial DNA under conditions in which φX174 closed circular DNA is cleaved.     

cis-acting components in the replication origin from ribosomal DNA of Saccharomyces cerevisiae.

The ribosomal DNA (rDNA) repeats of Saccharomyces cerevisiae contain an autonomously replicating sequence (ARS) that colocalizes with a chromosomal origin of replication. We show that a minimal sequence necessary for full ARS function corresponds to a 107-bp rDNA fragment which contains three 10-of-11-bp matches to the ARS consensus sequence. Point mutations in only one of the 10-of-11-bp matches, GTTTAT GTTTT, inactivate the rDNA ARS, indicating that this consensus sequence is essential. A perfect match to a revised ARS consensus is present but not essential. Sequences up to 9 bp 5' from the essential consensus are dispensable. A broad DNA region directly 3' to the essential consensus is required and is easily unwound as indicated by: (i) hypersensitivity to nicking of an approximately 100-bp region by mung bean nuclease in a negatively supercoiled plasmid and (ii) helical instability determined by thermodynamic analysis of the nucleotide sequence. A correlation between DNA helical instability and replication efficiency of wild-type and mutated ribosomal ARS derivatives suggests that a broad region 3' to the essential ARS consensus functions as a DNA unwinding element. Certain point mutations that do not stabilize the DNA helix in the 3' region but reduce ARS efficiency reveal an element distinct from, but overlapping, the DNA unwinding element. The nucleotide sequence of the functionally important constituents in the ARS appears to be conserved among the rDNA repeats in the chromosome.     

Construction and characterization of recombinant plasmid DNAs containing sequences of the origin of bacteriophage phi X174 DNA replication

The synthetic DNA fragment (formula, see text) (corresponding to nucleotides 4299-4314 of the phi X DNA sequence) was cloned into either the AmpR gene or the KmR gene of plasmid pACYC 177. The DNA sequence of the KmR gene around the insertion site was determined by nucleotide sequence analysis of the pACYC 177 FnudII restriction DNA fragment N6 (345 b.p.). Of five selected plasmid DNAs, which contained inserted DNA sequences in the antibiotic resistance genes, the nucleotide sequences at and around these insertions were determined. Two recombinant plasmids (pFH 704 and pFH 614) contain the hexadecamer sequence in tandem (tail-to-tail and tail-to-head). In the recombinant plasmids pFH 812, pFH 903 and pFH 807 the DNA sequence homology with the phi X origin region was 14 (No. 4300-4313), 16 (No. 4299-4314) and 20 nucleotides (No. 4299-4318), respectively. None of the supercoiled recombinant plasmid DNAs is nicked upon incubation with phi X gene A protein. Moreover, the recombinant plasmid RFI DNAs cannot act as substitutes for phi X RFI DNA in the in vitro (+) strand synthesizing system. It has been shown earlier that single-stranded DNA, which contains the decamer sequence CAACTTGATA is efficiently nicked by the phi X gene A protein. The present results indicate that for nicking of double-stranded supercoiled DNA nucleotide sequence homology with the phi X origin region of more than 20 nucleotides is required. These results suggest a model for initiation of phi X RF DNA replication, which involves the presence of the recognition sequence CAACTTGATA of the phi X gene A protein as well as a second specific nucleotide sequence which is required for the binding of the phi X gene A protein. This binding causes local unwinding of the DNA double helix and exposure of the recognition sequence in a single-stranded form, which then can be nicked by phi X gene A protein.     

Mutational analysis of the bacteriophage phi X174 replication origin

Bacteriophage phi X174 mutants within the 30 base-pair replication origin were constructed using oligodeoxynucleotide-directed mutagenesis. A total of 18 viable base substitution mutants at 13 different positions within the origin region were obtained. The majority of these ori mutants have a plaque morphology and burst size comparable to that of wild-type phi X174. Two phi X174 ori mutants with a reduced growth ability spontaneously acquired additional mutations that enhanced the growth rate. The additional mutation was located at the same site as the original mutation or was located in the N-terminal part of the gene A protein. This latter secondary mutation is responsible for a better binding and/or recognition of the gene A protein to the mutated origin. In a Darwinian experiment wild-type phi X174 outgrows all phi X174 ori mutants, indicating the superiority of the wild-type ori sequence for the reproduction of bacteriophage phi 174. Insertions and deletions were constructed at different positions within the phi X174 replication origin cloned in a plasmid. Small insertions and deletions in the A + T-rich spacer region do not inhibit phi X174 gene A protein cleavage in vitro, but severely impair packaging of single-stranded plasmid DNA in viral coats.     

The function of the nuclear matrix attachment region of silkworm rDNA as an autonomously replicating sequence in plasmid and chromosomal replication origin in yeast

Nuclear matrix attachment regions (MARs) play a crucial role in chromatin architecture, gene expression, and DNA replication. Although it is well known that yeast autonomously replicating sequences (ARSs) bind nuclear matrix and MARs also function as ARS elements in yeast, whether a heterologous MAR or ARS element acts as a replication origin in the chromosome has not been elucidated. We previously identified a MAR (rMAR) located in the nontranscribed spacer (NTS) of silkworm Attacus ricini rDNA. We report here that this rMAR contains 10 copies of ARS consensus sequence (ACS) and several DNA unwinding regions. The rMAR employs ARS activity in yeast and a rARS element locates in the 3(') region of the rMAR. Furthermore, we have also revealed that either the rMAR or the rARS element functions as a replication origin in the chromosome. Our results provide the first direct evidence to demonstrate that heterologous rMAR and rARS display chromosomal origin activity, suggesting that the chromosome structure and replication origin of rDNA reserve some common features during evolution.     

Effect of phi X C protein on leading strand DNA synthesis in the phi X174 replication pathway

The influence of the bacteriophage phi X174 (phi X) C protein on the replication of bacteriophage phi X174 DNA has been examined. This small viral protein, which is required for the packaging of phi X DNA into proheads, inhibits leading strand DNA synthesis. The inhibitory effect of the phi X C protein requires a DNA template bearing an intact 30-base pair (bp) phi X origin of DNA replication that is the target site recognized by the phi X A protein. Removal of nucleotides from the 3' end of this 30-bp conserved origin sequence prevents the inhibitory effects of the phi X C protein. Leading strand replication of supercoiled DNA substrates containing the wild-type phi X replication origin results in the production of single-stranded circular DNA as well as the formation of small amounts of multimeric and sigma structures. These aberrant products are formed when the termination and reinitiation steps of the replication pathway reactions are skipped as the replication fork moves through the origin sequence. Replication carried out in the presence of the phi X C protein leads to a marked decrease in these aberrant structures. While the exact mechanism of action of the phi X C protein is not clear, the results presented here suggest that the phi X C protein slows the movement of the replication fork through the 30-bp origin sequence, thereby increasing the fidelity of the termination and reinitiation reactions. In keeping with the requirement for the phi X C protein for efficient packaging of progeny phi X DNA into proheads, the phi X C protein-mediated inhibition of leading strand synthesis is reversed by the addition of proteins essential for phi X bacteriophage formation. Incubation of plasmid DNA substrates bearing mutant 30 base pair phi X origin sequences in the complete packaging system results in the in vitro packaging and production of infectious particles in a manner consistent with the replication activity of the origin under study.     

Modular sequence elements associated with origin regions in eukaryotic chromosomal DNA.

We have postulated that chromosomal replication origin regions in eukaryotes have in common clusters of certain modular sequence elements (Benbow, Zhao, and Larson, BioEssays 14, 661-670, 1992). In this study, computer analyses of DNA sequences from six origin regions showed that each contained one or more potential initiation regions consisting of a putative DUE (DNA unwinding element) aligned with clusters of SAR (scaffold associated region), and ARS (autonomously replicating sequence) consensus sequences, and pyrimidine tracts. The replication origins analyzed were from the following loci: Tetrahymena thermophila macronuclear rDNA gene, Chinese hamster ovary dihydrofolate reductase amplicon, human c-myc proto-oncogene, chicken histone H5 gene, Drosophila melanogaster chorion gene cluster on the third chromosome, and Chinese hamster ovary rhodopsin gene. The locations of putative initiation regions identified by the computer analyses were compared with published data obtained using diverse methods to map initiation sites. For at least four loci, the potential initiation regions identified by sequence analysis aligned with previously mapped initiation events. A consensus DNA sequence, WAWTTDDWWWDHWGWHMAWTT, was found within the potential initiation regions in every case. An additional 35 kb of combined flanking sequences from the six loci were also analyzed, but no additional copies of this consensus sequence were found.