<Emphasis Type="Italic">Chlorella vulgaris</Emphasis> (SAG 211-12) biofilm formation capacity and proposal of a rotating flat plate photobioreactor for more sustainable biomass production

Difficulties and cost of suspended microalgal biomass harvest and processing can be overcome by cultivating microalgae as biofilms. In the present work, a new photoautotrophic biofilm photobioreactor, the rotating flat plate photobioreactor (RFPPB), was developed aiming at a cost-effective production of Chlorella vulgaris (SAG 211-12), a strain not frequently referred in the literature but promising for biofuel production. Protocols were developed for evaluating initial adhesion to different materials and testing the conditions for biofilm formation. Polyvinyl chloride substrate promoted higher adhesion and biofilm production, followed by polypropylene, polyethylene, and stainless steel. The new RFPPB was tested, aiming at optimizing incident light utilization, minimizing footprint area and simplifying biomass harvesting. Tests show that the photobioreactor is robust, promotes biofilm development, and has simple operation, small footprint, and easy biomass harvest. Biomass production (dry weight) under non-optimized conditions was 3.35 g m^?2, and areal productivity was 2.99 g m^?2 day^?1. Lipid content was 10.3% (dw), with high PUFA content. These results are promising and can be improved by optimizing some operational parameters, together with evaluation of long-term photobioreactor maximum productivity.     

Sessile Legionella pneumophila is able to grow on surfaces and generate structured monospecies biofilms

Currently, models for studying Legionella pneumophila biofilm formation rely on multi-species biofilms with low reproducibility or on growth in rich medium, where planktonic growth is unavoidable. The present study describes a new medium adapted to the growth of L. pneumophila monospecies biofilms in vitro. A microplate model was used to test several media. After incubation for 6 days in a specific biofilm broth not supporting planktonic growth, biofilms consisted of 5.36 ± 0.40 log (cfu cm^?2) or 5.34 ± 0.33 log (gu cm^?2). The adhered population remained stable for up to 3 weeks after initial inoculation. In situ confocal microscope observations revealed a typical biofilm structure, comprising cell clusters ranging up to ～300 μm in height. This model is adapted to growing monospecies L. pneumophila biofilms that are structurally different from biofilms formed in a rich medium. High reproducibility and the absence of other microbial species make this model useful for studying genes involved in biofilm formation.     

Flowing biofilms as a transport mechanism for biomass through porous media under laminar and turbulent conditions in a laboratory reactor system

Abstract

Fluid flow has been shown to be important in influencing biofilm morphology and causing biofilms to flow over surfaces in flow cell experiments. However, it is not known whether similar effects may occur in porous media. Generally, it is assumed that the primary transport mechanism for biomass in porous media is through convection, as suspended particulates (cells and flocs) carried by fluid flowing through the interstices. However, the flow of biofilms over the surfaces of soils and sediment particles, may represent an important flux of biomass, and subsequently affect both biological activity and permeability. Mixed species bacterial biofilms were grown in glass flow cells packed with 1 mm diameter glass beads, under laminar or turbulent flow (porous media Reynolds number = 20 and 200 respectively). The morphology and dynamic behavior reflected those of biofilms grown in the open flow cells. The laminar biofilm was relatively uniform and after 23 d had inundated the majority of the pore spaces. Under turbulent flow the biofilm accumulated primarily in protected regions at contact points between the beads and formed streamers that trailed from the leeward face. Both biofilms caused a 2 to 3-fold increase in friction factor and in both cases there were sudden reductions in friction factor followed by rapid recovery, suggesting periodic sloughing and regrowth events. Time-lapse microscopy revealed that under both laminar and turbulent conditions biofilms flowed over the surface of the porous media. In some instances ripple structures formed. The velocity of biofilm flow was on the order of 10 μm h^?1 in the turbulent flow cell and 1.0 μm h^?1 in the laminar flow cell.     

Linking biofilm spatial structure to real-time microscopic oxygen decay imaging

Two non-destructive techniques, confocal laser scanning microscopy (CLSM) and planar optode (VisiSens imaging), were combined to relate the fine-scale spatial structure of biofilm components to real-time images of oxygen decay in aquatic biofilms. Both techniques were applied to biofilms grown for seven days at contrasting light and temperature (10/20°C) conditions. The geo-statistical analyses of CLSM images indicated that biofilm structures consisted of small (~10⁰ μm) and middle sized (~10¹ μm) irregular aggregates. Cyanobacteria and EPS (extracellular polymeric substances) showed larger aggregate sizes in dark grown biofilms while, for algae, aggregates were larger in light-20°C conditions. Light-20°C biofilms were most dense while 10°C biofilms showed a sparser structure and lower respiration rates. There was a positive relationship between the number of pixels occupied and the oxygen decay rate. The combination of optodes and CLMS, taking advantage of geo-statistics, is a promising way to relate biofilm architecture and metabolism at the micrometric scale.     

Nutrient dynamics and successional changes in a lentic freshwater biofilm

SUMMARY 1. Colonisation, species composition, succession of microalgae and nutrient dynamics in biofilms grown under light and dark conditions were examined during the initial phases of biofilm development in a lentic freshwater environment.
2. Biofilms were developed on inert (perspex) panels under natural illuminated and experimental dark conditions and the panels were retrieved for analysis after different incubation periods. Analysed parameters included biofilm thickness, algal density, biomass, chlorophyll a , species composition, total bacterial density and nutrients such as nitrite, nitrate, phosphate and silicate.
3. Biofilm thickness, algal density, biomass, chlorophyll a and species richness were significantly higher in light-grown biofilms, compared with dark-grown biofilms. The light-grown biofilms showed a three-phased succession pattern, with an initial domination of Chlorophyceae followed by diatoms (Bacillariophyceae) and finally by cyanobacteria. Dark-grown biofilms were mostly dominated by diatoms.
4. Nutrients were invariably more concentrated in biofilms than in ambient water. Nutrient concentrations were generally higher in dark-grown biofilms except in the case of phosphate, which was more concentrated in light-grown biofilms. Significant correlations between nutrients and biofilm parameters were observed only in light-grown biofilms.
5. The N : P ratio in the biofilm matrix decreased sharply in the initial 4 days of biofilm growth; ensuing N-limitation status seemed to influence biofilm community structure. The N : P ratios showed significant positive correlations with the chlorophycean fraction in both light and dark-grown biofilms, and low N : P ratio in the older biofilms favoured cyanobacteria. Our data indicate that nutrient chemistry of biofilm matrix shapes community structure in microalgal biofilms.     

Effects of Inorganic Turbidity on the Phytoplankton of an Amazonian Lake Impacted by Bauxite Tailings

The dumping of bauxite tailings into Batata Lake, an Amazonian clear-water lake, generated high levels of turbidity and caused a serious decrease in phytoplankton densities, which could possibly be the result of a photosynthetic limitation due to light attenuation together with an increase in algal sinking due to the adhesion of clay particles. This study aimed to investigate the sinking process through the addition of different suspended clay concentrations in columns containing Batata lake water. Since no effect of the suspended clays on Batata Lake phytoplankton sinking was observed, it was then evaluated, under laboratory conditions, whether the low conductivity of the Batata Lake water could interfere with the algae-clay aggregation process. Cultures of two algal species known to be capable to aggregate to Batata Lake suspended clays in algal culture medium: Staurodesmus convergens and Phormidium amoenum, were added to both the low conductivity Batata Lake water (14 μS cm^?1) and the high conductivity algal culture media (WC – 300 μS cm^?1 and Z8 – 560 μS cm^?1) together with Batata lake suspended clays. In both algal culture media and Batata lake water the two species had their sinking accelerated due to clay adhesion. It is thus suggested that the decrease in phytoplankton densities recorded in Batata Lake may not be related to an increase in phytoplankton loss rates due to algal-clay aggregation, but rather are a consequence of decreasing growth rates because of light attenuation.     

Seasonal determinations of extracellular hydrolytic activities in heterotrophic and mixed heterotrophic/autotrophic biofilms from two contrasting rivers

The temporal changes in extracellular enzyme activities in freshwater microbial biofilms were examined in two contrasting river sites in North Wales over a 12 month period. Sites were a first order, unshaded oligotrophic upland stream (Nant Waen) and a fourth order, mildly eutrophic river with riparian tree cover (River Clywedog). When algal populations were low, biofilms of the more eutrophic site supported greater enzyme activities and higher population densities than the oligotrophic site. Composition, concentration and origin of substrates available to the respective biofilm communities influenced extracellular processing patterns. Reduction in algal populations depressed total and extracellular activities in biofilms from the first order site, suggesting that biofilm communities here were maintained by in situ primary production. Biofilms from Nant Waen were often found to contain higher extracellular activities per cell than the more eutrophic River Clywedog biofilms, which might represent the enhanced ability of an oligotrophic biofilm to accumulate extracellular enzymes. In contrast, light and darkgrown River Clywedog biofilms were not enzymatically distinct, inferring a less important role for biofilm phototrophs. Some evidence was found for increased reliance on allochthonous substrates in the River Clywedog for biofilm maintenance.     

The HIV aspartyl protease inhibitor ritonavir impairs planktonic growth,biofilm formation and proteolytic activity in Trichosporon spp.

This study evaluated the effect of the protease inhibitor ritonavir (RIT) on Trichosporon asahii and Trichosporon inkin. Susceptibility to RIT was assessed by the broth microdilution assay and the effect of RIT on protease activity was evaluated using azoalbumin as substrate. RIT was tested for its anti-biofilm properties and RIT-treated biofilms were assessed regarding protease activity, ultrastructure and matrix composition. In addition, antifungal susceptibility, surface hydrophobicity and biofilm formation were evaluated after pre-incubation of planktonic cells with RIT for 15 days. RIT (200 μg ml^?1) inhibited Trichosporon growth. RIT (100 μg ml^?1) also reduced protease activity of planktonic and biofilm cells, decreased cell adhesion and biofilm formation, and altered the structure of the biofilm and the protein composition of the biofilm matrix. Pre-incubation with RIT (100 μg ml^?1) increased the susceptibility to amphotericin B, and reduced surface hydrophobicity and cell adhesion. These results highlight the importance of proteases as promising therapeutic targets and reinforce the antifungal potential of protease inhibitors.     

Biofilm formation by the yeast Rhodotorula mucilaginosa: process,repeatability and cell attachment in a continuous biofilm reactor

Yeast biofilms contribute to quality impairment of industrial processes and also play an important role in clinical infections. Little is known about biofilm formation and their treatment. The aim of this study was to establish a multi-layer yeast biofilm model using a modified 3.7 l bench-top bioreactor operated in continuous mode (D = 0.12 h^?1). The repeatability of biofilm formation was tested by comparing five bioprocesses with Rhodotorula mucilaginosa, a strain isolated from washing machines. The amount of biofilm formed after 6 days post inoculation was 83 μg cm^?2 protein, 197 μg cm^?2 polysaccharide and 6.9 × 10⁶ CFU cm^?2 on smooth polypropylene surfaces. Roughening the surface doubled the amount of biofilm but also increased its spatial variability. Plasma modification of polypropylene significantly reduced the hydrophobicity but did not enhance cell attachment. The biofilm formed on polypropylene coupons could be used for sanitation studies.     

Structural changes in S. epidermidis biofilms after transmission between stainless steel surfaces

Transmission is a main route for bacterial contamination, involving bacterial detachment from a donor and adhesion to receiver surfaces. This work aimed to compare transmission of an extracellular polymeric substance (EPS) producing and a non-EPS producing Staphylococcus epidermidis strain from biofilms on stainless steel. After transmission, donor surfaces remained fully covered with biofilm, indicating transmission through cohesive failure in the biofilm. Counter to the numbers of biofilm bacteria, the donor and receiver biofilm thicknesses did not add up to the pre-transmission donor biofilm thickness, suggesting more compact biofilms after transmission, especially for non-EPS producing staphylococci. Accordingly, staphylococcal density per unit biofilm volume had increased from 0.20 to 0.52 μm^–3 for transmission of the non-EPS producing strain under high contact pressure. The EPS producing strain had similar densities before and after transmission (0.17 μm^–3). This suggests three phases in biofilm transmission: (1) compression, (2) separation and (3) relaxation of biofilm structure to its pre-transmission density in EPS-rich biofilms.     

Multistage operation of airlift photobioreactor for increased production of astaxanthin from Haematococcus pluvialis

An internally radiating photobioreactor was applied for the production of astaxanthin using the unicellular green alga Haematococcus pluvialis. The cellular morphology of H. pluvialis was significantly affected by the intensity of irradiance of the photobioreactor. Small green cells were widespread under lower light intensity, whereas big reddish cells were predominant under high light intensity. For these reasons, growth reflected by cell number or dry weight varied markedly with light conditions. Even under internal illumination of the photobioreactor, light penetration was significantly decreased as algal cells grew. Therefore, we employed a multistage process by gradually increasing the internal illuminations for astaxanthin production. Our results revealed that a multistage process might be essential to the successful operation of a photobioreactor for astaxnthin production using H. pluvialis.     

Establishing a laboratory model of dental unit waterlines bacterial biofilms using a CDC biofilm reactor

In this study, a laboratory model to reproduce dental unit waterline (DUWL) biofilms was developed using a CDC biofilm reactor (CBR). Bacteria obtained from DUWLs were filtered and cultured in Reasoner’s 2A (R2A) for 10 days, and were subsequently stored at ?70°C. This stock was cultivated on R2A in batch mode. After culturing for five days, the bacteria were inoculated into the CBR. Biofilms were grown on polyurethane tubing for four days. Biofilm accumulation and thickness was 1.3 × 10⁵ CFU cm^?2 and 10–14 μm respectively, after four days. Bacteria in the biofilms included cocci and rods of short and medium lengths. In addition, 38 bacterial genera were detected in biofilms. In this study, the suitability and reproducibility of the CBR model for DUWL biofilm formation were demonstrated. The model provides a foundation for the development of bacterial control methods for DUWLs.     

The effect of harvesting on biomass production and nutrient removal in phototrophic biofilm reactors for effluent polishing

An increasing number of wastewater treatment plants require post-treatment to remove residual nitrogen and phosphorus. This study investigated various harvesting regimes that would achieve consistent low effluent concentrations of nitrogen and phosphorus in a phototrophic biofilm reactor. Experiments were performed in a vertical biofilm reactor under continuous artificial lighting and employing artificial wastewater. Under similar conditions, experiments were performed in near-horizontal flow lanes with biofilms of variable thickness. It was possible to maintain low nitrogen and phosphorus concentrations in the effluent of the vertical biofilm reactor by regularly harvesting half of the biofilm. The average areal biomass production rate achieved a 7 g dry weight m^?2 day^?1 for all different harvesting frequencies tested (every 2, 4, or 7 days), corresponding to the different biofilm thicknesses. Apparently, the biomass productivity is similar for a wide range of biofilm thicknesses. The biofilm could not be maintained for more than 2 weeks as, after this period, it spontaneously detached from the carrier material. Contrary to the expectations, the biomass production doubled when the biofilm thickness was increased from 130 μm to 2 mm. This increased production was explained by the lower density and looser structure of the 2 mm biofilm. It was concluded that, concerning biomass production and labor requirement, the optimum harvesting frequency is once per week.     

Experimental and Computational Investigation of Biofilm Formation by Rhodopseudomonas palustris Growth under Two Metabolic Modes

We examined biofilms formed by the metabolically versatile bacterium Rhodopseudomonas palustris grown via different metabolic modes. R. palustris was grown in flow cell chambers with identical medium conditions either in the presence or absence of light and oxygen. In the absence of oxygen and the presence of light, R. palustris grew and formed biofilms photoheterotrophically, and in the presence of oxygen and the absence of light, R. palustris grew and formed biofilms heterotrophically. We used confocal laser scanning microscopy and image analysis software to quantitatively analyze and compare R. palustris biofilm formation over time in these two metabolic modes. We describe quantifiable differences in structure between the biofilms formed by the bacterium grown heterotrophically and those grown photoheterotrophically. We developed a computational model to explore ways in which biotic and abiotic parameters could drive the observed biofilm architectures, as well as a random-forest machine-learning algorithm based on structural differences that was able to identify growth conditions from the confocal imaging of the biofilms with 87% accuracy. Insight into the structure of phototrophic biofilms and conditions that influence biofilm formation is relevant for understanding the generation of biofilm structures with different properties, and for optimizing applications with phototrophic bacteria growing in the biofilm state.     

Magnetic Resonance Imaging of Mass Transport and Structure Inside a Phototrophic Biofilm

The aim of this study was to utilize magnetic resonance imaging (MRI) to image structural heterogeneity and mass transport inside a biofilm which was too thick for photon based imaging. MRI was used to map water diffusion and image the transport of the paramagnetically tagged macromolecule, Gd-DTPA, inside a 2.5 mm thick cyanobacterial biofilm. The structural heterogeneity of the biofilm was imaged at resolutions down to 22 × 22 μm, enabling the impact of biofilm architecture on the mass transport of both water and Gd-DTPA to be investigated. Higher density areas of the biofilm correlated with areas exhibiting lower relative water diffusion coefficients and slower transport of Gd-DTPA, highlighting the impact of biofilm structure on mass transport phenomena. This approach has potential for shedding light on heterogeneous mass transport of a range of molecular mass molecules in biofilms.     

An in vitro dynamic microcosm biofilm model for caries lesion development and antimicrobial dose-response studies

Some dynamic biofilm models for dental caries development are limited as they require multiple experiments and do not allow independent biofilm growth units, making them expensive and time-consuming. This study aimed to develop and test an in vitro dynamic microcosm biofilm model for caries lesion development and for dose-response to chlorhexidine. Microcosm biofilms were grown under two different protocols from saliva on bovine enamel discs for up to 21 days. The study outcomes were as follows: the percentage of enamel surface hardness change, integrated hardness loss, and the CFU counts from the biofilms formed. The measured outcomes, mineral loss and CFU counts showed dose-response effects as a result of the treatment with chlorhexidine. Overall, the findings suggest that biofilm growth for seven days with 0.06 ml min^?1 salivary flow under exposure to 5% sucrose (3 × daily, 0.25 ml min^?1, 6 min) was suitable as a pre-clinical model for enamel demineralization and antimicrobial studies.     

Inhibition of biofilm populations of Nitrosomonas europaea

The influence of surface attachment and growth on inhibition of the ammonia oxidizing bacterium, Nitrosomonas europaea, by nitrapyrin was investigated in liquid culture in the presence and absence of glass slides. Significant attachment to glass slides occurred in the absence of ammonia, but the extent of attachment was not affected by nitrapyrin, nor by previous culture of cells in medium containing nitrapyrin. The presence of glass slides affected neither the specific growth rate of N. europaea, measured by changes in nitrite concentration, nor inhibition by nitrapyrin. Inhibitory effects of nitrapyrin on increases in nitrite concentration and in free cell concentration were similar, but greater effects were observed on changes in attached cell concentration. Established biofilms on glass slides grew at a lower specific growth rate than freely suspended cells. Both biofilm cells, and those detached from the biofilm, were protected from inhibition. A mechanism for protection of biofilm populations is proposed involving reduced sensitivity of slowly growing cells producing extracellular polymeric material. Offprint requests to.: J. I. Prosser.     

Biofouling control in water by various UVC wavelengths and doses

UV light irradiation is being increasingly applied as a primary process for water disinfection, effectively used for inactivation of suspended (planktonic) cells. In this study, the use of UV irradiation was evaluated as a pretreatment strategy to control biofouling. The objective of this research was to elucidate the relative effectiveness of various targeted UV wavelengths and a polychromatic spectrum on bacterial inactivation and biofilm control. In a model system using Pseudomonas aeruginosa, the inactivation spectra corresponded to the DNA absorption spectra for all wavelengths between 220 and 280 nm, while wavelengths between 254 nm and 270 nm were the most effective for bacterial inactivation. Similar wavelengths of 254-260-270 nm were also more effective for biofilm control in most cases than targeted 239 and 280 nm. In addition, the prevention of biofilm formation by P. aeruginosa with a full polychromatic lamp was UV dose-dependent. It appears that biofilm control is improved when larger UV doses are given, while higher levels of inactivation are obtained when using a full polychromatic MP lamp. However, no significant differences were found between biofilms produced by bacteria that survived UV irradiation and biofilms produced by control bacteria at the same microbial counts. Moreover, the experiments showed that biofilm prevention depends on the post-treatment incubation time and nutrient availability, in addition to targeted wavelengths, UV spectrum and UV dose.     

A high-throughput method for measuring growth and loss rates in microalgal cultures

A miniaturized and low-cost assay for algal growth and loss rates, and estimation of compensation light was developed and optimized. Microalgal cultures were grown in white 96-well microplates to estimate specific growth rates at six temperatures, five salinities and eight light levels. Data from black 24-well microplates at six temperatures, five salinities and five light conditions were used in addition to estimate loss rates and compensation light. Absorption and reflection of light were different in the white and black microplates. Growth rates were estimated from daily in vivo fluorescence (IVF) measurements using a microplate reader fitted with a fluorometer. To validate the microplate algal growth assay, IVF was compared with cell counting by flow cytometry. Maximal growth rate for the test alga Pseudochattonella farcimen (Heterokonta) was estimated to 0.52?±?0.05 day^?1 at optimal temperatures ranging from 9 to 14°C and salinities 18–26 psu. Lowest value of compensation light as photosynthetic photon flux density (PPFD) was 4.2?±?1.2 μmol photons m^?2 s^?1, and lowest saturation light, 34.1?±?3.7 μmol photons m^?2 s^?1, was observed in the temperature range 5–11°C and salinity range 23–28 psu. Minimum loss rate was obtained at temperatures 5–8°C and salinities 26–31 psu. Blooms of P. farcimen have been recorded in nature under conditions similar to those minimizing loss rates rather than maximizing growth rates in this study. The microalgal assay described here allows for a large number of conditions to be tested, and accurate optimal conditions for growth and loss rates to be obtained.     

Unraveling assembly of stream biofilm communities

Microbial biofilms assemble from cells that attach to a surface, where they develop into matrix-enclosed communities. Mechanistic insights into community assembly are crucial to better understand the functioning of natural biofilms, which drive key ecosystem processes in numerous aquatic habitats. We studied the role of the suspended microbial community as the source of the biofilm community in three streams using terminal-restriction fragment length polymorphism and 454 pyrosequencing of the 16S ribosomal RNA (rRNA) and the 16S rRNA gene (as a measure for the active and the bulk community, respectively). Diversity was consistently lower in the biofilm communities than in the suspended stream water communities. We propose that the higher diversity in the suspended communities is supported by continuous inflow from various sources within the catchment. Community composition clearly differed between biofilms and suspended communities, whereas biofilm communities were similar in all three streams. This suggests that biofilm assembly did not simply reflect differences in the source communities, but that certain microbial groups from the source community proliferate in the biofilm. We compared the biofilm communities with random samples of the respective community suspended in the stream water. This analysis confirmed that stochastic dispersal from the source community was unlikely to shape the observed community composition of the biofilms, in support of species sorting as a major biofilm assembly mechanism. Bulk and active populations generated comparable patterns of community composition in the biofilms and the suspended communities, which suggests similar assembly controls on these populations.