Covalent immobilization of penicillin acylase from Streptomyces lavendulae

Penicillin acylase from Streptomyces lavendulae has been covalently immobilized to epoxy-activated acrylic beads (Eupergit C). Consecutive modification of the matrix with bovine serum albumin leads to a new biocatalyst (ECPVA) with enhanced activity (1.5 fold) in the hydrolysis of penicillin V respect to its soluble counterpart. This biocatalyst had a K _m value of 7.6 mM, slightly higher than K _m for native acylase (3 mM). In addition, ECPVA can be recycled for at least 50 consecutive batch reactions without loss of catalytic activity.     

Active site titration as a tool for the evaluation of immobilization procedures of penicillin acylase

Native and immobilized preparations of penicillin acylase from Escherichia coli and Alcaligenes faecalis were studied using an active site titration technique. Knowledge of the number of active sites allowed the calculation of the average turnover rate of the enzyme in the various preparations and allowed us to quantify the contribution of irreversible inactivation of the enzyme to the loss of catalytic activity during the immobilization procedure. In most cases a loss of active sites as well as a decrease of catalytic activity per active site (turnover rate) was observed upon immobilization. Immobilization techniques affected the enzymes differently. The effect of increased loading of penicillin acylase on the average turnover rate was determined by active site titration to assess diffusion limitations in the carrier.     

Enhancement of penicillin acylase activity by cultivating immobilized Kluyvera citrophila

Summary Whole cells of Kluyvera citrophila were immobilized in polyacrylamide gel. The penicillin acylase activity of immobilized whole cells was 60%–70% of native cells. When the immobilized cells were continuously cultivated for 40 h in an aerated fermentor containing peptone medium and were treated with alkali in order to remove -lactamase activity, the immobilized cells produced ampicillin up to 4.4 times faster than noncultivated cells.Ampicillin production was investigated in a column system using these cultivated immobilized whole cells. The cultivated immobilized cells showed excellent performance in continuous ampicillin production.     

Reactivation of heterodimer and individual subunits of penicillin acylase from E. coli after inactivation in urea

Individual subunits of penicillin acylase from E. coli were isolated by gel-filtration under denaturing conditions (8 M urea). Recovery of the catalytic activity of the penicillin acylase heterodimer was studied after removal of urea. In the case of the heterodimer, 40-60% of the initial activity was recovered, whereas the activity of individual subunits was not recovered. Combination of native enzyme subunits with subunits isolated from the enzyme pre-inactivated with the irreversible inhibitor phenylmethylsulfonyl fluoride resulted in heterodimers which were active only in the case of involvement of the beta-subunit of the active enzyme.     

Enzymatic splitting of penicillin V for the production of 6-APA using immobilized penicillin V acylase

Penicillin V acylase from Fusarium sp. SKF 235 was immobilized on several cation-exchange resins, of which Amberlite CG-50 was preferred. Maximum activity of the immobilized penicillin V acylase was 250 to 280 IU/g dry beads. The pH and temperature optima of the enzyme shifted from 6.5 to 6.8 and 55°C to 60°C, respectively, as a result of immobilization. However, the K _m for penicillin V remained at 10mm. Parameters for producing 6-aminopenicillanic acid were investigated and the immobilized penicillin V acylase was used for 68 cycles in a stirred tank reactor.     

Activation and stabilization of penicillin V acylase from streptomyces lavendulae in the presence of glycerol and glycols

Penicillin V acylase (EC 3.5.1.11) from Streptomyces lavendulae showed both enhanced activity and stability in mixed water/glycerol and water/glycols solvents. The catalytic activity was increased up to a critical concentration of these cosolvents, but further addition of the latter led to a gradual protein deactivation. The highest stabilizing effect was achieved in the presence of glycerol. Thermal stability was increased proportionally to the concentration of glycerol and glycols in the reaction mixture only if the amount added is below the threshold concentration. Reaction conditions that allow simultaneously enhanced activity and stability in the hydrolysis of penicillin V catalyzed by penicillin V acylase from S. lavendulae could be established.     

Immobilization of penicillin G acylase on aminoalkylated polyacrylic supports

A procedure is described for the immobilization of penicillin G acylase (PA) on Amberlite XAD7 modified by transamidation with 1,2-ethylenediamine and activated with glutaraldehyde. Reduction with sodium borohydride of the Schiff's bases formed between the amino groups of the protein and glutaraldehyde results in a dramatic improvement of the operational stability of the immobilized enzyme without affecting the catalytic activity. The enzyme kept in presence of the substrate, penicillin G, displays an increased stability with respect to that stored in pure phosphate buffer solution. The inactivation kinetics of the immobilized preparations of PA, determined in a continuous fixed bed reactor, as well as a discontinuous batch reactor, are reported.     

聚丙烯腈纤维固定化青霉素酰化酶性质的研究

将巨大芽孢杆菌（Bacillusmegaterium）青霉素酞化酶连接到聚丙烯腈纤维载体上,制成固定化青霉素酰化酶。其表现活力约为2000u／g。水解青霉素G的最适温度为50℃;最适PH为9．0;在PHS．5～10．3、温度50℃以下酶的活力稳定;表观米氏常数Ka为1．33×10-8mol／L;最大反应速度Vm为2．564mmol·min-1;苯乙酸为竞争性抑制剂,抑制常数为0．16mol／L。水解10％的青霉素G钾盐溶液,使用20批,保留酶活力80％。     

A new method for spectrophotometric assay of activity of cross-linked penicillin acylase aggregates

A new method for monitoring reactions catalyzed by an immobilized enzyme, cross-linked penicillin acylase aggregates (PA CLEA), is suggested. Appropriate chromogenic substrates for spectrophotometric assay of catalytic activity of immobilized enzyme were chosen and their kinetic parameters determined. Active sites in PA CLEA preparations were titrated by the suggested method; it is shown that almost all active sites are retained during immobilization. This method is characterized as highly expressive, simple, and precise and may be used for control of PA immobilization efficiency as well as for study of operational, thermal, and pH stability of immobilized enzyme preparations.     

聚丙烯腈纤维固定化青霉素酰化酶合成头孢氨苄的研究

将巨大芽孢杆菌胞外青霉素酰化酶通过共价键结合到聚丙烯腈纤维的衍生物上。制成的丝状固定化青霉素酰化酶表现活力达 1 5 3U g(湿重 )。固定化酶合成头孢氨苄的最适pH为 6 5 ,最适温度为 40℃。 7 ADCA的投料浓度以 4%为好 ,7 ADCA与PGME的投料量比率为1∶2 ,最佳用酶量为 1 70U g 7 ADCA。在pH6 5、温度 3 0℃时 ,固定化酶对 7 ADCA的表观米氏常数K7 ADCA为 0 1 6 2mol L ,对PGME的表观米氏常数KPGME为 0 3 6 4mol L ,最大反应速度Vmax为0 0 4 6 2mol·L- 1·min- 1,用固定化酶合成头孢氨苄 ,使用 5 0次保留酶活力 83 9%     

固定化青霉素酰化酶在光-pH敏感可回用两水相中裂解青霉素G为6-APA

两水相体系在发展中存在的关键问题是相体系回收困难.由于生产成本及降低污染的原因, 用过的相体系需要回收和重复使用.用环境敏感型溶解可逆聚合物形成可回用两水相体系是当前是为可行的回收方法。本文在光敏感可回用高聚物PNBC与pH敏感型可回用高聚物PADB形成的两水相体系中进行固定化青霉素酰化酶的相转移催化青霉素G产生6-APA的反应。在这个两水相体系中,通过优化,在1% NaCl 存在下,６－ＡＰＡ的分配系数可达5.78。催化动力学显示,达平衡的时间近7h,反应最高得率约85.3%（pH 7.8, 20℃）。较相近条件下的单水相反应得率提高近20%。在反应过程中,通过底物及产物的分配系数检测,发现底物分配系数变化不大,而产物6-APA及苯乙酸的分配系数发生很大变化,从而引起产物的得率变化。在两水相中,底物及产物主要分配在上相,固定化酶分配在下相,底物青霉素G进入下相经酶催化产生的6-APA及苯乙酸又转入上相,从而解除了青霉素酰化酶催化反应的底物及产物抑制作用,达到提高产物得率的效果。此外,采用固定化酶较固定化细胞效率高,占用下相体积小,较游离酶稳定性高,且完全单侧分配在下相。因此,在两水相中进行固定化酶的催化反应具有明显的优越性。形成两水相的高聚物PNBC通过488 nm 的激光照射或经滤光的450nm 光源照射得到回收;pH敏感型成相聚合物PADB可通等电点 4.1沉淀可实现循环利用,高聚物的回收率在95%-98%之间,按此回收率计算,聚合物可使用60次以上。     

Immobilization ofKluyvera citrophila penicillins acylase on controlled-pore ceramics

Penicillin acylase was purified fromKluyvera citrophila and immobilized on glutaraldehyde derivatives of silanized controlled-pore ceramics. The behaviour of the enzyme attached to TiO₂, Al₂O₃ and SiO₂ in the hydrolytic reaction are compared with that of the native enzyme as well as of the enzyme bound to CNBr-activated Sepharose 4B. The enzyme immobilized on TiO2 shows an efficiency of about 95% on the basis of protein bound. The penicillin acylase attached to SiO₂, unlike the enzyme immobilized on TiO₂, Al₂O₃ and Sepharose looses activity markedly in every cycle of use.     

Immobilization of penicillin acylase on acrylic carriers

Penicillin acylase obtained from E. Coli (E. C. 3.5.1.11) was covalently bound via glutaric aldehyde to acrylic carriers crosslinked with divinylbenzene or ethylene glycol dimethacrylate. The best enzymatic preparation was obtained by using ethyl acrylate/ ethylene glycol dimethacrylate copolymer. 1 cm³ of the carrier bound 6.4 mg of protein, having 72% activity in relation to the native enzyme. The preparation lost only 10% of its initial activity after 100 d of storage at 4°C. A negligible effect of immobilization on the enzyme activity at different temperatures or pH as well as significant increase of the stability of the immobilized enzyme at elevated temperatures were observed.Abbreviations BA butyl acrylate - AE ethyl acrylate - PA penicillin acylase - 6-APA 6-aminopenicillanic acid - EGDMA ethylene glycol dimethacrylate - DVB divinylbenzene     

A Novel Activity of Immobilized Penicillin G Acylase: Removal of Benzyloxycarbonyl Amino Protecting Group

A novel activity of penicillin G acylase from E. coli is presented. This enzyme, immobilized onto agarose gels by multipoint covalent attachment, was used for removing the benzyloxycarbonyl (Z) amino protecting group from selected amino acids and oligopeptides in different reaction systems. Quantitative deprotection yields were obtained for simple amino acids, while the efficiency with oligopeptides varied depending on the sequence.     

Immobilization of <Emphasis Type="Italic">Alcaligenes faecalis</Emphasis> penicillin G acylase on epoxy-type supports

Alcaligenes faecalis penicillin G acylase has several desired features over other penicillin G acylases and its use in industry requires immobilization. In this work, two novel supports ZH-EP (epoxy type) and ZH-HA (epoxy-amino type) were used to immobilize Alcaligenes faecalis penicillin G acylase (AfPGA) with Eupergit C as reference. The saturation of immobilized protein on ZH-EP (269 mg/g, 116 h) and ZH-HA (296 mg/g, 15 h) was obtained more rapidly than Eupergit C (197 mg/g, 260 h). And the activity of immobilized AfPGA on ZH-EP (520 U/g) and ZH-HA (2200 U/g) was higher than that on Eupergit C (310 U/g). The properties of three immobilized enzymes were compared and no obvious difference was observed, which indicated that ZH-EP and ZH-HA were promised in industry.     

Enzyme reaction engineering: effect of methanol on the synthesis of antibiotics catalyzed by immobilized penicillin G acylase under isothermal and non-isothermal conditions

The effect of methanol on the kinetically controlled synthesis of cephalexin by free and immobilized penicillin G acylase (PGA) was investigated. Catalytic and hydrophobic membranes were obtained by chemical grafting, activation, and PGA immobilization on hydrophobic nylon supports. Butyl methacrylate (BMA) was used as graft monomer. Increasing concentrations of methanol were found to cause a greater deleterious effect on the activity of free than on that of the immobilized enzyme. Methanol, however, improved the kinetic stability of cephalexin synthesized by free PGA, resulting in higher maximum yields. By contrast, immobilized PGA reached 100% yields even in the absence of the cosolvent. Cephalexin synthesis by the catalytic membrane was also performed in a non-isothermal bioreactor. Under these conditions, a 94% increase of the synthetic activity and complete conversion of the limiting substrate to cephalexin were obtained. The addition of methanol reduced the non-isothermal activity increase. The physical cause responsible for the non-isothermal behavior of the hydrophobic catalytic membrane was identified in the process of thermodialysis.     

pH stability of penicillin acylase from <Emphasis Type="Italic">Escherichia coli</Emphasis>

The inactivation kinetics of penicillin acylase from Escherichia coli have been investigated over a wide pH range at 25 and 50 degrees C. The enzyme was very stable in neutral solutions and quickly lost its catalytic activity in acidic and alkaline solutions. In all cases, the inactivation proceeded according to first order reaction kinetics. Analysis of the pH dependence of enzyme stability provides evidence that stable penicillin acylase conformation is maintained by salt bridges. Destruction of the salt bridges due to protonation/deprotonation of the amino acid residues forming these ion pairs causes inactivation by formation of the unstable "acidic" EH(4)(3+), EH(3)(2+), EH(2)(+) and "alkaline" E(-) enzyme forms. At temperatures above 35 degrees C penicillin acylase apparently undergoes a conformational change that is accompanied by destruction of one of these salt bridges and change in the catalytic properties.     

Preparation and kinetic properties of immobilized benzyl penicillin acylase]

An active insoluble preparation of immobilized benzyl penicillin acylase (IBA) EC 3.5.1.11 has been obtained by its entrapping into polyacrylamide gel lattice. Due to immobilization the preparation maintains up to 87% of its initial activity. The kinetics of IBA at low substrate concentrations obeys the Michaelis-Menten law; however, the apparent KM value decreases and the temperature optimum elevates. The inhibition by the reaction products--6-aminopenicillanic acid and phenylacetic acid--has been found to be 4.3 mM. The resultant IBA preparation proves to be suitable for hydrolysis of 5% benzyl penicillin solutions.     

Immobilization of permeabilized Escherichia coli cells with penicillin acylase activity.

Escherichia coli cells with penicillin acylase activity were sequentially treated at pH 7.8 with aqueous solutions of N-cetyl-N,N,N-trimethylammonium bromide and glutaraldehyde and then immobilized within porous polyacrylamide beads. The immobilized whole cells showed enhanced hydrolysis rates in the conversion of benzylpenicillin to 6-aminopenicillanic acid (6-APA) compared to untreated cells immobilized and used under identical conditions. The immobilized system showed no apparent loss in enzyme activity when used repeatedly over 90 cycles for 6-APA production from 4% benzylpenicillin.     

Regulation of the catalytic activity and supermolecular structure of penicillin acylase from Escherichia coli in an aerosol OT reversed micelle system in octane]

The properties of penicillin acylase from E. coli solubilized by hydrated reversed micelles of Aerozol OT (AOT) in octane were studied. The catalytic activity dependence on the hydration degree, a parameter which determines the size of the micelle inner cavity, represents a curve with three optima, each corresponding to the enzyme functioning either in a dimer form (omega 0 = 23) or in the form of separate subunits--heavy, beta, and light, alpha, at omega 0 = 20 and 14, respectively. Reversible dissociation of the enzyme was confirmed by ultracentrifugation followed by electrophoresis. Preparative isolation of penicillin acylase subunits, their catalytic activity being retained, was shown to be possible.