Electric oscillation in an excitable model membrane impregnated with lipid analogues

A model membrane constructed from a Millipore filter, whose pores were impregnated with dioleyl phosphate, exhibited an electric self-oscillation under nonequilibrium conditions. The membrane interposed between two solutions with the same KCl concentrations showed no temporal change in membrane potential. However, the potential became oscillatory on application of an electric current to the membrane. The frequency was proportional to the magnitude of the electric current. When both KCl solutions were replaced by NaCl solutions, a similar trend was observed, although the oscillation was not as regular as in the case of KCl. A membrane placed between equimolar solutions of KCl and NaCl, on the other hand, gave rise to an oscillation even without current application. When a membrane was placed between 5 mM KCl and 100 mM KCl, it was found that NaCl added to the 5 mM KCl side had a pronounced effect on the membrane with respect to the frequency response of the oscillation. These results indicate that the dioleyl phosphate membrane discriminates Na+ from K+.     

Porin from bacterial and mitochondrial outer membranes

The outer membrane of gram-negative bacteria acts as a molecular filter with defined exclusion limit for hydrophilic substances. The exclusion limit is dependent on the type of bacteria and has for enteric bacteria like Escherichia coli and Salmonella typhimurium a value between 600 and 800 Daltons, whereas molecules with molecular weights up to 6000 can penetrate the outer membrane of Pseudomonas aeruginosa. The molecular sieving properties result from the presence of a class of major proteins called porins which form trimers of identical subunits in the outer membrane. The porin trimers most likely contain only one large but well-defined pore with a diameter between 1.2 and 2 nm. Mitochondria are presumably descendents of gram-negative bacteria. The outer membrane of mitochondria contains in agreement with this hypothesis large pores which are permeable for hydrophilic substances with molecular weights up to 6000. The mitochondrial porins are processed by the cell and have molecular weights around 30,000 Daltons. There exists some evidence that the pore is controlled by electric fields and metabolic processes.     

Current-voltage characteristics and self-sustained oscillations in dioleyl phosphate-millipore membranes

For an artificial membrane prepared by infiltrating dioleyl phosphate (DOPH) into pores of a Millipore filter, we propose a theoretical model for explaining observed data on electric behavior, such as d.c. current-voltage characteristics and self-sustained oscillations of the electric potential. The model consists of a simple electric circuit composed of electric resistances and capacitances as given functions of internal variables which represent conformational states of DOPH molecules and salt concentration inside the pore concerned. The kinetic equations for these variables are the same as those presented previously for describing a phase transition of DOPH. except for a slight modification taking account of effects of salt accumulation inside the pore. The present theory can describe well the I-V hysteresis and various features of spike-like oscillations with long periods of up to a few hours in the absence of external force and also short-period oscillations with periods of the order of 1 s under pressure difference.     

Transport phenomena in a model membrane accompanying a conformational change: Transient processes in response to external stimuli

Summary A model membrane composed of a filter paper and dioleylphosphate was studied by applying various kinds of external stimuli. When the concentration in the external solution was varied successively, the physico-chemical properties of the membrane changed drastically at a certain valueC _t . The relationships between the electrical response and the external stimuli studied are as follows: (1) The membrane potential oscillates spontaneously in a spikelike fashion when the concentration of the external solution is suddenly changed. (2) The current through the membrane oscillates in spikelike fashion for a duration of about 50 msec when the constant external voltage, V larger than a certain value V _c , is applied across the membrane. (3) The electric resistance sharply decreases, and a kind of action potential similar to that observed in living tissues is produced when a short rectangular electric stimulus, whose magnitude is higher than a critical value V _p , is applied. (4) If a hydrostatic pressure difference across the membrane is applied with appropriate salt conditions, the value of the membrane potential varies with time, as in the case of (3). The observed changes in emf and electric resistance are discussed in connection with the conformational change of DOPH molecules in the membrane.     

Dependence of the intensity of growth processes on the potential difference at the cytoplasmic membrane

The growth of organisms is a dynamic process of interrelated fluxes of substances and energy which most often proceeds in the steady-state conditions, the energy-dependent process being predominant. The rate of growth is directly proportional to the potential difference at the plasma membrane, created essentially by a passive influx of energy substance to the cell oxidative system which is a limiting link of its energization. The formation of potential difference is influenced by concentrations of biomass and energy substrate at the plasma membrane, as well as the values of electric capacity of the membrane and rate constants for the electric charge formation and expenditure.     

Potassium channel, ions, and water: simulation studies based on the high resolution X-ray structure of KcsA

Interactions of Na(+), K(+), Rb(+), and Cs(+) ions within the selectivity filter of a potassium channel have been investigated via multiple molecular dynamics simulations (total simulation time, 48 ns) based on the high resolution structure of KcsA, embedded in a phospholipid bilayer. As in simulations based on a lower resolution structure of KcsA, concerted motions of ions and water within the filter are seen. Despite the use of a higher resolution structure and the inclusion of four buried water molecules thought to stabilize the filter, this region exhibits a significant degree of flexibility. In particular, pronounced distortion of filter occurs if no ions are present within it. The two most readily permeant ions, K(+) and Rb(+), are similar in their interactions with the selectivity filter. In contrast, Na(+) ions tend to distort the filter by binding to a ring of four carbonyl oxygens. The larger Cs(+) ions result in a small degree of expansion of the filter relative to the x-ray structure. Cs(+) ions also appear to interact differently with the gate region of the channel, showing some tendency to bind within a predominantly hydrophobic pocket. The four water molecules buried between the back of the selectivity filter and the remainder of the protein show comparable mobility to the surrounding protein and do not exchange with water molecules within the filter or the central cavity. A preliminary comparison of the use of particle mesh Ewald versus cutoff protocols for the treatment of long-range electrostatics suggests some difference in the kinetics of ion translocation within the filter.     

Lipid-impregnated filters as a tool for studying the electric current-generating proteins.

Porous filters and collodion film impregnated with decane solution of phospholipids, were used for measurements of electric potential differences generated by bacteriorhodopsin, chromatophore redox chain, H⁺-ATPase, pyrophosphatase, and mitochondrial respiratory chain. It was shown that reconstituted proteoliposomes, containing e.g., bacteriorhodopsin or natural coupling membrane vesicles, such as Rhodospirillum rubrum chromatophores, can be attached to a filter surface by means of Ca²⁺ or Mg²⁺ ions. Addition of the respective energy source was found to result in electric potential difference being generated across the filter. This effect was measured directly by $\text{Ag}\text{AgCl}$ electrodes immersed into electrolyte solutions on both sides of the filter. Using a phospholipid-impregnated collodion film one can measure electric responses as fast as 300 nsec. The phospholipid-impregnated filters turned out to be sensitive and reliable electrodes for measuring the concentration of synthetic penetrating ions, such as phenyldicarbaundecaborane, tetraphenylborate, tetrapentylammonium, and tetraphenylphosphonium. By measuring changes in the concentration of these ions in the suspension of proteoliposomes, chromatophores, mitochondria, or bacterial cells, one can follow the formation and dissipation of transmembrane potential differences in these systems. It is shown that the phospholipid-impregnated filters are much more reliable and handy than planar phospholipid membranes previously used for studying electrogenic activity of electric current-producing membrane proteins.     

Effect of surface charge density on the kinetics of transmembrane lipid migration in asymmetric bilayers

An asymmetric bilayer consisting of neutral and negatively-charged lipid molecules experiences an internal electric field due to the difference in the surface densities of the charged lipid molecules in the two surfaces of the bilayer. Considering both an uncoupled and a tightly-coupled model of transmembrane migration (flip-flop) of the lipid head groups, the importance of the internal field of the kinetics of flip-flop is discussed. It is shown that as the equilibrium asymmetry due to different solutions bathing each side of the membrane becomes less pronounced, the fitting of the kinetics by an uncoupled model neglecting the electric field becomes better, although the rate constants that can be extracted from this procedure are meaningless from a physical point of view.     

Electrical hemolysis of human and bovine red blood cells.

The external electric field strength required for electrical hemolysis of human red blood cells depends sensitively on the composition of the external medium. In isotonic NaCl und KCl solutions the onset of electrical hemolysis is observed at 4 kV per cm and 50 per cent hemolysis at 6 kV per cm, whereas increasing concentrations of phosphate, sulphate, sucrose, inulin and EDTA shift the onset and the 50 per cent hemolysis-value to higher field strengths. The most pronounced effect is observed for inulin and EDTA. In the presence of these substances the threshold value of the electric field strength is shifted to 14 kV per cm. This is in contrast to the dielectric breakdown voltage of human red blood cells which is unaltered by these substances and was measured to be approximately 1 V corresponding in the electrolytical discharge chamber to an external electric field strength of 2 to 3 kV per cm. On the other hand, dielectric breakdown of bovine red blood cell membranes occurs in NaCl solution at 4 to 5 kV per cm and is coupled directly with hemoglobin release. The electrical hemolysis of cells of this species is unaffected by the above substances with exception of inulin. Inulin suppressed the electrical hemolysis up to 15 kV per cm. The data can be explained by the assumption that the reflection coefficients of the membranes of these two species to bivalent anions and uncharged molecules are field-dependent to a different extent. This explanation implies that electrical hemolysis is a secondary process of osmotic nature induced by the reversible permeability change of the membrane (dielectric breakdown) in response to an electric field. This view is supported by the observation that the mean volumes of ghost cells obtained by electrical hemolysis can be changed by changing the external phosphate concentration during hemolysis and resealing, or by subjecting the cells to a transient osmotic stress immediately after the electrical hemolysis step. An interesting finding is that the breakdown voltage, although constant throughout each normally distributed ghost size distribution, increases with increasing mean volume of the ghost populations.     

On the molecular mechanisms implicated in the bipolar cancellation of membrane electroporation

Bipolar cancellation is the phenomenon in which the permeability of cell membranes subjected to high intensity short pulsed electric field (ns-μs range) is reduced or eliminated when the system is subjected to bipolar instead of monopolar pulses. Although several studies have tried to explain bipolar cancellation, the underlying mechanisms remain unclear. Very few articles study bipolar cancellation by means of molecular dynamics (MD) simulation. In this paper, we investigated the molecular mechanisms underlying the difference in electroporation induced by bipolar and monopolar picosecond electric pulses (EPs) using MD simulation. The electric field gradients and electric forces on water molecules of the two pulses were analyzed in detail for the first time. For a certain pulse width, when the field intensity is relatively small, the direction of bipolar electric force on the interfacial water molecule reverses as the bipolar EPs reverse, while the electric force on interfacial water molecules of the cathode side remains in the same direction as that of applied monopolar EPs. The bipolar electric force reversal delays the water protrusion and increases the pore formation time. Therefore, this phenomenon could correspond to bipolar cancellation. When the field intensity is relatively large, although the bipolar electric force direction still reverses, half of the total time of the monopolar EPs has no electric fields. The electric forces of monopolar no-field half-cycles are much smaller than those of the bipolar EPs. Therefore, the pore formation time of bipolar EPs reduces, and this phenomenon is called bipolar enhancement. The occurrence of bipolar cancellation or bipolar enhancement depends on conditions such as the width and intensity of the pulse.     

Macular pigments lutein and zeaxanthin as blue light filters studied in liposomes.

Lutein and zeaxanthin are the predominant carotenoids in the human macula lutea. Epidemiological data suggest that an increased intake of a lutein-rich diet correlates with a diminished risk for age-related macular degeneration, a major cause of impaired vision in the elderly. Filtering of blue light has been proposed as a possible mechanism of protection. Here, the blue light filter efficacy of carotenoids was investigated in unilamellar liposomes loaded in the hydrophilic core space with a fluorescent dye, Lucifer yellow, excitable by blue light. Carotenoids were incorporated into the lipophilic membrane. Fluorescence emission in carotenoid-containing liposomes was lower than in carotenoid-free controls when exposed to blue light, indicating a filter effect. Filter efficacy was in the order lutein > zeaxanthin > beta-carotene > lycopene. Some of the difference in blue light filter efficacy of carotenoids is attributable to differences in extinction coefficients, and a major further contribution is suggested to be related to the orientation of the incorporated molecules in the liposomal membrane.     

ELECTROKINETIC PHENOMENA : XIII. A COMPARISON OF THE ISOELECTRIC POINTS OF DISSOLVED AND CRYSTALLINE AMINO ACIDS

1. Although the isoelectric points of dissolved cystine, tyrosine, and aspartic acid molecules lie at widely differing pH values, the isoelectric points of the surfaces of these substances in the crystalline state are all near pH 2.3. This was found to be true in solutions of hydrochloric acid and in acetate buffers of approximately constant ionic strength. 2. When suspended in gelatin, tyrosine and cystine crystals adsorb the protein and attain a surface identical in behavior with gelatin-coated quartz or collodion particles. 3. Aluminum ions at low concentrations reduce the electric mobilities of tyrosine crystals to zero in a manner analogous to their effect on other surfaces. 4. Alkyl benzene droplets also have their electric mobility reduced to zero at low pH values but, unlike the amino acids, a change in sign was never noticed. 5. The mobility of tyrosine crystals is independent of crystal length between 2–100µ. Below this size the mobilities are decreased. 6. These results are discussed in connection with the concept of the general definition of the isoelectric point and the behavior of certain insoluble proteins such as wool and silk fibroin.     

A simple method for electrophoretic selection and fractionation of poly(A)-containing RNA and poly(A).

A simple procedure, useful for quantitative and qualitative assays of poly(A)-containing RNA and poly(A), as well as for preparative purposes, is described. Glass-fiber filters with immobilized poly(U), a well-known technique for absorption of poly(A)-containing RNA, is combined with electrophoresis in a gel slab of agarose. In front of each of the two troughs in a gel slab, glass-fiber filters are inserted, one of which is impregnated with poly(U). Two identical RNA samples, e.g., split samples of total RNA from salivary glands of Chironomus tentans, are applied to the troughs and are moved electrophoretically across two different filters. The electrophoresis is conducted under conditions which promote the formation of duplexes between absorbed poly(U) and moving poly(A). While the passage of RNA chains across the control filter may take place essentially freely, RNA molecules that contain poly(A) hybridize with poly(U) fixed in the glass-fiber filter and become trapped there. The difference between resulting gel profiles [pattern of the total RNA minus the pattern of RNA not containing poly(A)] yields the electrophoretic distribution of poly(A)-containing RNA. In addition, poly(A)-containing RNA can be eluted from the poly(U) filter with formamide and subjected to electrophoresis without a subsequent precipitation in ethanol. No measurable quantities of ribosomal RNA or tRNA are retained on the poly(U) glass-fiber filters. The hybridization technique enables a quantitative retention of poly(A) molecules representing a wide range of chain lengths.     

Is there an osmotic regulatory mechanism in algae and higher plants?

Under water-stress conditions the amounts of various polyols and also of the imino acid proline are found to increase significantly in different algae and higher plants. These substances have been interpreted until now to act osmotically by increasing the concentration in the cell, thus causing water reflux and balancing osmotic pressure difference from outside the cell to inside.A new concept is described, which proposes that the regulatory function of these accumulating substances is conducted by two mechanisms quite different from osmotic regulation. It is assumed that these regulatory pathways are connected with the hydrophobic groups of biopolymers in the cell cytoplasm. (1) Polyols can replace water molecules by means of their water like OH-groups and thus participate in the hydrophobically enforced water structure. (2) Proline is postulated to associate via its hydrophobic phot with hydrophobic side chains, thereby converting them into hydrophilic groups by exposure the carboxylic and imino group versus water molecules. The advantage is due to the fact that water associated with hydrophilic groups is bound via hydrogen bonding forces, in contrary to hydrophobic groups. In addition, the number of water molecules adjoining hydrophilic groups is far less than those involved with hydrophobic residues. By means of these two alternative mechanisms complete hydration of the biopolymers is maintained, even with a reduced number of available water molecules.     

Electroporation: an arsenal of application

Electroporation is a way to induce nanometersized membrane pore for exogenous substances delivery into cytoplasm using an artificial electric field. Now it was widely used for molecules transfer especially in molecular experiments and genetic aspects. In recent years, modern electroporation on the embryo was developed, whose most important point is that it adopts low energy and rectangular pulse that could obtain high transfection efficiency and low damage to the embryo. This paper reviewed on the pool of application: from lab works to human clinical treatments.     

Release mode of large and small dense-core vesicles specified by different synaptotagmin isoforms in PC12 cells

Many cells release multiple substances in different proportions according to the specific character of a stimulus. PC12 cells, a model neuroendocrine cell line, express multiple isoforms of the exocytotic Ca(2+) sensor synaptotagmin. We show that these isoforms sort to populations of dense-core vesicles that differ in size. These synaptotagmins differ in their Ca(2+) sensitivities, their preference for full fusion or kiss-and-run, and their sensitivity to inhibition by synaptotagmin IV. In PC12 cells, vesicles that harbor these different synaptotagmin isoforms can be preferentially triggered to fuse by different forms of stimulation. The mode of fusion is specified by the synaptotagmin isoform activated, and because kiss-and-run exocytosis can filter small molecules through a size-limiting fusion pore, the activation of isoforms that favor kiss-and-run will select smaller molecules over larger molecules packaged in the same vesicle. Thus synaptotagmin isoforms can provide multiple levels of control in the release of different molecules from the same cell.     

Electrical hemolysis of human and bovine red blood cells

Summary The external electric field strength required for electrical hemolysis of human red blood cells depends sensitively on the composition of the external medium. In isotonic NaCl und KCl solutions the onset of electrical hemolysis is observed at 4 kV per cm and 50% hemolysis at 6 kV per cm, whereas increasing concentrations of phosphate, sulphate, sucrose, inulin and EDTA shift the onset and the 50% hemolysis-value to higher field strengths. The most pronounced effect is observed for inulin and EDTA. In the presence of these substances the threshold value of the electric field strength is shifted to 14 kV per cm. This is in contrast to the dielectric breakdown voltage of human red blood cells which is unaltered by these substances and was measured to be 1 V corresponding in the electrolytical discharge chamber to an external electric field strength of 2 to 3 kV per cm. On the other hand, dielectric breakdown of bovine red blood cell membranes occurs in NaCl solution at 4 to 5 kV per cm and is coupled directly with hemoglobin release. The electrical hemolysis of cells of this species is unaffected by the above substances with exception of inulin. Inulin suppressed the electrical hemolysis up to 15 kV per cm. The data can be explained by the assumption that the reflection coefficients of the membranes of these two species to bivalent anions and uncharged molecules are field-dependent to a different extent. This explanation implies that electrical hemolysis is a secondary process of osmotic nature induced by the reversible permeability change of the membrane (dielectric breakdown) in response to an electric field. This view is supported by the observation that the mean volumes of ghost cells obtained by electrical hemolysis can be changed by changing the external phosphate concentration during hemolysis and resealing, or by subjecting the cells to a transient osmotic stress immediately after the electrical hemolysis step. An interesting finding is that the breakdown voltage, although constant throughout each normally distributed ghost size distribution, increases with increasing mean volume of the ghost populations.     

The electric unit size of thylakoid membranes.

The size of the function unit of electrical events in thylakoid membranes was estimated by the minimum amount of gramicidin needed to discharge the flash light generated electrical potential difference. Early flash spectroscopic measurements have indicated that a single gramicidin dimer operates on an electrical function unit containing at least 2 x 10(5) chlorophyll molecules. In this study we present gramicidin titrations with more intact thylakoid preparations which revealed a more than hundred-fold greater lower limit for the electric unit size, namely 5 x 10(7) chlorophyll molecules. It is conceivable that the whole complicated thylakoid structure inside a chloroplast constitutes a single electric unit. It comprises more than 2 x 10(8) chlorophyll molecules in an area of more than 400 microns 2.     

Enhanced polymerization of polar macromolecules by an applied electric field with application to mitosis

Numerous cellular processes are characterized by the rapid polymerization of protein molecules to form rod-like structures. Examples include the formation of spindle fibers from tubulin during cell division and the polymerization of actin into the actin filaments of the pseudopod in chemotaxis. It has been proposed that these proteins possess an electric dipole moment and that the onset of an internal electric field triggers polymerization. In this theoretical study, the relative probability of polymerization of a polar protein species is calculated in the presence and absence of an electric field. There is a significant enhancement of polymerization in the presence of an electric field, which increases as the size of the attachment site decreases. We conclude that a cytoplasmic pool of suitable proteins will rapidly polymerize if an electric field is applied, while remaining in a random configuration in the absence of a field. This mechanism is applied to the mitotic spindle structure, and by assuming that the spindle poles become oppositely charged during mitosis, a finite difference method is used to calculate the spindle structure at metaphase. Good agreement is obtained with experiment data.     

Odd mating-type substances may work as precursor molecules of even mating-type substances in Paramecium caudatum

Mating-type substances are key molecules in the sexual recognition of the odd (O) and even (E) complementary mating-type cells in Paramecium caudatum. Indirect evidence suggested that the substances were proteins and were located on ventral surface cilia. Monoclonal antibodies inhibiting the mating reactivity of the O cells have been obtained. Using these antibodies, we tried to detect antigen molecules as dot-blot signals. Strong dot-blot signals of antigens were only detected from the mating reactive cells, but they were not detected from the well-fed and starved cells without mating reactivity. In addition to identifying the antigen on cilia and cytoplasm of the O cell, the antigen was detected from the cytoplasm of the E cells but never from their cilia. Furthermore, extracts of the E cells induced mating reaction with the living E cells but not with O cells. Thus, the O mating-type substances exist in the cytoplasm of the E mating-type cells, supporting strongly the hypothesis that O mating-type substances are precursor molecules of the E mating-type substances.