Metal ion binding to calmodulin: NMR and fluorescence studies

Calmodulin is an important second messenger protein which is involved in a large variety of cellular path-ways.Calmodulin is sensitive to fluctuations in the intracellular Ca levels and is activated by the bindingof four Ca ions. In spite of the important role it plays in signal transduction pathways, it shows a surpris-inglybroad specificity for binding metal ions. Using 15N-Gly biosynthetically-labelled calmodulin, we havestudied the binding of different metal ions to calmodulin, including K+, Na+, Ca, Mg, Zn, Cd, Pb, Hg, Sr, La and Lu, by 1H, 15N HMQC NMR experiments. The effects of these ions on the substrate-bindingability of calmodulin have also been studied by fluorescence spectroscopy of the single tryptophan residue in a 22-residue synthetic peptide encompassing the skeletal muscle myosin light chain kinase calmod-ulin-binding domain. Most of these metal ions can activate a calmodulin target enzyme to some extent,though they bind to calmodulin in a different manner. Mg, which is of direct physiological interest, has adistinct site-preference for calmodulin, as it shows the highest affinity for site I in the N-terminal domain,while the C-terminal sites III and IV are the high affinity binding sites for Ca (as well as for Cd ). At ahigh concentration of Mg and a low concentration of Ca, calmodulin can bind Mg in its N-terminallobe while the C-terminal domain is occupied by Ca; this species could exist in resting cells in which the Mg level significantly exceeds that of Ca. Moreover, our data suggest that the toxicity of Pb-which,like Sr, binds with an equal and high affinity to all four sites-may be related to its capacity to tightlybind and improperly activate calmodulin.     

Calmodulin binds to a tubulin binding site of the microtubule-associated protein tau

Previous studies have demonstrated that the microtubule - associated proteins MAP-2 and tau interact selectively with common binding domains on tubulin defined by the low-homology segments a (430–441) and (422–434). It has been also indicated that the synthetic peptide VRSKIGSTENLKHQPGGG corresponding to the first tau repetitive sequence represents a tubulin binding domain on tau. The present studies show that the calcium-binding protein calmodulin interacts with a tubulin binding site on tau defined by the second repetitive sequence VTSKCGSLGNIHHKPGGG. It was shown that both tubulin and calmodulin bind to tau peptide-Sepharose affinity column. Binding of calmodulin occurs in the presence of 1 mM Ca 2+ and it can be eluted from the column with 4 mM EGTA. These findings provide new insights into the regulation of microtubule assembly, since Ca 2+/calmodulin inhibition of tubulin polymerization into microtubules could be mediated by the direct binding of calmodulin to tau, thus preventing the interaction of this latter protein with tubulin.     

The interaction of calmodulin with fluorescent and photoreactive model peptides: evidence for a short interdomain separation

Calmodulin is known to bind target enzymes and basic, amphiphilic peptides in a Ca2(+)-dependent manner. Recently, we introduced a photoaffinity label, p-benzoylphenylalanine (Bpa), into the sequence of a model, alpha-helical, calmodulin-binding peptide. When the Bpa residue was introduced at the third position of the peptide, Met-144 on the C-terminal domain of calmodulin was labeled, whereas when the photolabel was placed at the thirteenth position, Met-71 on the N-terminal domain was labeled. Assuming that both peptides bind in similar orientations, these results are not consistent with the crystal structure of calmodulin, in which the domains are held at a significant distance from one another by a long alpha-helical segment. To test the assumption that both peptides bind in similar orientations, we have synthesized a calmodulin-binding peptide with the photolabel in both the third and the thirteenth positions. Upon photolysis, this peptide forms a cross-link between Met-71 and Met-124 on the N- and C-terminal domains, respectively. Furthermore, a peptide with a Bpa in the thirteenth position and a Trp residue in the third position was also synthesized. After photocross-linking the Bpa residue of this peptide to Met-71 of calmodulin, it could be shown that the fluorescence properties of the Trp residue were consistent with its side chain being buried in a hydrophobic pocket on the C-terminal domain of calmodulin. These data indicate that, when complexed with basic, amphiphilic peptides, calmodulin can adopt a conformation in which its two domains are significantly closer than in the crystal structure of the uncomplexed protein.     

A strategy to identify linker-based modules for the allosteric regulation of antibody-antigen binding affinities of different scFvs

Antibody single-chain variable fragments (scFvs) are used in a variety of applications, such as for research, diagnosis and therapy. Essential for these applications is the extraordinary specificity, selectivity and affinity of antibody paratopes, which can also be used for efficient protein purification. However, this use is hampered by the high affinity for the protein to be purified because harsh elution conditions, which may impair folding, integrity or viability of the eluted biomaterials, are typically required. In this study, we developed a strategy to obtain structural elements that provide allosteric modulation of the affinities of different antibody scFvs for their antigen. To identify suitable allosteric modules, a complete set of cyclic permutations of calmodulin variants was generated and tested for modulation of the affinity when substituting the linker between VH and VL. Modulation of affinity induced by addition of different calmodulin-binding peptides at physiologic conditions was demonstrated for 5 of 6 tested scFvs of different specificities and antigens ranging from cell surface proteins to haptens. In addition, a variety of different modulator peptides were tested. Different structural solutions were found in respect of the optimal calmodulin permutation, the optimal peptide and the allosteric effect for scFvs binding to different antigen structures. Significantly, effective linker modules were identified for scFvs with both VH-VL and VL-VH architecture. The results suggest that this approach may offer a rapid, paratope-independent strategy to provide allosteric regulation of affinity for many other antibody scFvs.     

Comparative study of the binding of 3 flavonoids to the fat mass and obesity‐associated protein by spectroscopy and molecular modeling

This study aims to investigate the interaction between 3 flavonoids (quercetin, apigenin, and naringenin) and fat mass and obesity‐associated protein by fluorescence, ultraviolet‐visible absorption spectroscopy, and molecular modeling. Results indicate that the intrinsic fluorescence of fat mass and obesity‐associated protein can be quenched by the 3 flavonoids through a static quenching procedure. Thermodynamic analysis and molecular modeling results suggest that hydrophobic interaction and hydrogen bond forces play the major roles in the binding process. Moreover, results also show that the rank order of quenching constant and binding constant is quercetin > apigenin > naringenin.     

The complex structure of calmodulin bound to a calcineurin peptide

The activity of the protein phosphatase calcineurin (CN) is regulated by an autoinhibition mechanism wherein several domains from its catalytic A subunit, including the calmodulin binding domain (CaMBD), block access to its active site. Upon binding of Ca2+ and calmodulin (Ca2+/CaM) to CaMBD, the autoinhibitory domains dissociate from the catalytic groove, thus activating the enzyme. To date, the structure of the CN/CaM/Ca2+ complex has not been determined in its entirety. Previously, we determined the structure of a fusion protein consisting of CaM and a 25-residue peptide taken from the CaMBD, joined by a 5-glycine linker. This structure revealed a novel CaM binding motif. However, the presence of the extraneous glycine linker cast doubt on the authenticity of this structure as an accurate representation of CN/CaM binding in vivo. Thus, here, we have determined the crystal structure of CaM complexed with the 25-residue CaMBD peptide without the glycine linker at a resolution of 2.1 A. The structure is essentially identical to the fusion construction which displays CaM bound to the CaMBD peptide as a dimer with an open, elongated conformation. The N-lobe from one molecule and C-lobe from another encompass and bind the CaMBD peptide. Thus, it validates the existence of this novel CaM binding motif. Our experiments suggest that the dimeric CaM/CaMBD complex exists in solution, which is unambiguously validated using a carefully-designed CaM-sepharose pull-down experiment. We discuss structural features that produce this novel binding motif, including the role of the CaMBD peptide residues Arg-408, Val-409, and Phe-410, which work to provide rigidity to the otherwise flexible central CaM helix joining the N- and C-lobes, ultimately keeping these lobes apart and forcing "head-to-tail" dimerization to attain the requisite N- and C-lobe pairing for CaMBD binding.     

Competitive binding of fluoroquinolone antibiotics and some other drugs to human serum albumin: a luminescence spectroscopic study

Co‐administration of several drugs in multidrug therapy may alter the binding of each to human serum albumin (HSA) and hence their pharmacological activity. Thirty‐two frequently prescribed drug combinations, consisting of four fluoroquinolone antibiotics and eight competing drugs, have been studied using fluorescence and circular dichroism spectroscopic techniques. Competitive binding studies on the drug combinations are not available in the literature. In most cases, the presence of competing drug decreased the binding affinity of fluoroquinolone, resulting in an increase in the concentration of free pharmacologically active drug. The competitive binding mechanism involved could be interpreted in terms of the site specificity of the binding and competing drugs. For levofloxacin, the change in the binding affinity was small because in the presence of site II‐specific competing drugs, levofloxacin mainly occupied site I. A competitive interference mechanism was operative for sparfloxacin, whereas competitive interference as well as site‐to‐site displacement of competing drugs was observed in the case of ciprofloxacin hydrochloride. For enrofloxacin, a different behavior was observed for different combinations; site‐to‐site displacement and conformational changes as well as independent binding has been observed for various drug combinations. Circular dichroism spectral studies showed that competitive binding did not cause any major structural changes in the HSA molecule. Copyright © 2013 John Wiley & Sons, Ltd.     

Multi-spectroscopic and molecular modeling studies of interaction between two different angiotensin I converting enzyme inhibitory peptides from gluten hydrolysate and human serum albumin

The present study was carried out to characterize Angiotensin-converting enzyme (ACE) inhibitory peptides which are released from the trypsin hydrolysate of wheat gluten protein. The binding of two inhibitory peptide (P₄ and P₆) to human serum albumin (HSA) under physiological conditions has been investigated by multi-spectroscopic in combination with molecular modeling techniques. Time-resolved and quenching fluorescence spectroscopies results revealed that the quenching of HSA fluorescence by P₄ and P₆ in the binary and ternary systems caused HSA-peptides complexes formation. The results indicated that both peptides quenched the fluorescence intensity of HSA through a static mechanism. The binding affinities and number of binding sites were obtained for the HSA-peptides complexes. The circular dichroism (CD) data revealed that the presence of both peptides increased the α-helix content of HSA and induced the remarkable folding of the polypeptide of the protein. Therefore, the CD data determined that the protein structure has been stabilized in the percent of ACE inhibitory peptides in binary and ternary systems. The binding distances between HSA and both peptides were estimated by the Forster theory, and it was revealed that nonradiative energy transfer from HSA to peptides occurred with a high probability. ITC experiments reveal that, in the absence and presence of P₆, the dominant forces are electrostatic in binary and ternary systems. Furthermore, molecular modeling studies confirmed the experimental results. Molecular modeling investigation suggested that P₄ bound to the site IA and IIA of HSA in binary and ternary systems, respectively. This study on the interaction of peptides with HSA should prove helpful for realizing the distribution and transportation of food compliments and drugs in vivo, elucidating the action mechanism and dynamics of food compliments and drugs at the molecular level. It should moreover be of great use for understanding the pharmacokinetic and pharmacodynamic mechanism of the food compliments and drugs.     

Determining the binding site and binding affinity of estradiol to human serum albumin and holo-transferrin: fluorescence spectroscopic,isothermal titration calorimetry and molecular modeling approaches

The interactions between estradiol and two carrier proteins, i.e. human serum albumin (HSA) and holo-transferrin (HTF) in aqueous solution at pH = 7.4 were studied by three-dimensional fluorescence emission spectroscopy, isothermal titration calorimetry (ITC), zeta-potential, resonance light-scattering and molecular modeling. Extensive fluorescence quenching was observed throughout the interaction between the drug and both proteins. Moreover, conformational changes were determined by observing the rearrangement of Trp residues during binding of estradiol with HSA and HTF at different concentrations. ITC experiments revealed that, in the presence of estradiol, both van der Waals forces and hydrogen bonding became predominant. In addition, other binding parameters such as enthalpy and entropy changes were determined by the zeta potential method. Molecular modeling suggested that estradiol was situated within sub-domain IB sited in the hydrophobic cluster in Site I, whereas the drug was located in the N-terminal of HTF where it was hydrogen bonded with Ala 670.     

Dissection of binding of trypsin to its natural inhibitor Gensenoside-Rg1 using spectroscopic methods and molecular modeling

Abstract

The interaction of trypsin with Gensenoside-Rg1 (G-Rg1) was studied using fluorescence, ultraviolet–visible (UV–vis), and circular dichroism (CD) spectroscopies along with enzyme activity assay and molecular docking. The enzyme activity assays showed that G-Rg1 inhibited the activity of trypsin effectively. The fluorescence experiments indicated that a complex of G-Rg1–trypsin was formed and that the fluorescence of trypsin was quenched by G-Rg1 via a mixed-quenching mechanism (both static and dynamic quenching). The thermodynamic analysis suggested that hydrophobic interaction and hydrogen bond were the major forces between G-Rg1 and trypsin. According to the theory of Förster’s non-radiation energy transfer, the binding distance between trypsin and G-Rg1 was calculated to be 2.01?nm, which implies that energy transfer occurred within the complex. The experimental results obtained from UV–vis absorption spectra, synchronous fluorescence spectra, and CD spectra indicated that G-Rg1 was mainly located on tryptophan moiety and that the interaction between G-Rg1 and trypsin led to conformational changes of trypsin with some α-helix and unordered coil structures being transformed into β-sheet structures. In addition, docking results supported the above experimental findings and suggested the possible binding location of G-Rg1 on trypsin along with the possible hydrogen bonds and hydrophobic interactions between G-Rg1 and trypsin. The experimental results from this study should be useful to minimize the antinutritional effects and make full use of Genseng extracts in the food industry and also be helpful to the design of the drugs for the diseases related to overexpression of trypsin.

Communicated by Ramaswamy H. Sarma     

Probing the binding interaction of AKR with human serum albumin by multiple fluorescence spectroscopy and molecular modeling

Human serum albumin (HSA) is the major transport protein affording endogenous and exogenous substances in plasma. It can affect the behavior and efficacy of chemicals in vivo through the binding interaction. AKR (3-O-α-l-arabinofuranosyl-kaempferol-7-O-α-l-rhamnopyranoside) is a flavonoid diglycoside with modulation of estrogen receptors (ERs). Herein, we investigated the binding interaction between AKR and HSA by multiple fluorescence spectroscopy and molecular modeling. As a result, AKR specifically binds in site I of HSA through hydrogen bonds, van der Waals force, and electrostatic interaction. The formation of AKR–HSA complex in binding process is spontaneously exothermic and leads to the static fluorescence quenching through affecting the microenvironment around the fluorophores. The complex also affects the backbone of HSA and makes AKR access to fluorophores. Molecular modeling gives the visualization of the interaction between AKR and HSA as well as ERs. The affinity of AKR with HSA is higher than the competitive site marker Warfarin. In addition, docking studies reveal the binding interaction of AKR with ERs through hydrogen bonds, van der Waals force, hydrophobic, and electrostatic interactions. And AKR is more favorable to ERβ. These results unravel the binding interaction of AKR with HSA and mechanism as an ERs modulator.     

Trifluoroethanol and binding to model membranes stabilize a predicted turn in a peptide corresponding to the first extracellular loop of the angiotensin II AT(1A) receptor

Deuterium oxide solutions of a triple-helical polysaccharide schizophyllan, undergoing an order-disorder transition centered around 17 degrees C, were studied by the time-domain reflectometry (TDR) to obtain dielectric dispersions in the solution and frozen states. In the solution state, the dispersion below the transition temperature is resolved in three dispersions (relaxation times at 0 degrees C) ascribed to side chain glucose residue (1; 102 ns), structured water (s; 2.0 ns) and bulk water (h), respectively, from low to high frequencies. Bulk water is divided into slow water (h2; 0.04 ns) and free or pure water (h1; 0.02 ns). Above the transition temperature structured water almost disappears and is compensated by slow water. Structured water is similar to bound water for proteins but different from it because of this transition behavior. Another dispersion (l) seen at the lowest frequency is assigned to the rotation of side-chain glucose residue coupled with hydrated water. Parts of this dispersion and structured water are suggested to constitute bound water. In the frozen state were observed a major dispersion (h; 0.14 ns) and a minor one (m; 28 ns), which were ascribed to considerably mobile and less mobile waters. They are similar to but not exactly the same as that for unfreezable water in bovine serum albumin solutions argued by Miura et al. (Biopolymers, 1995, Vol. 36, p. 9). Water is molded into different structures by the triple helix.     

Molecular modeling of a T-cell receptor bound to a major histocompatibility complex molecule: implications for T-cell recognition.

The main functions of the T-cell receptor (TCR) involve its specific interaction with short and linear antigenic peptides bound to the major histocompatibility complex (MHC) molecules. In the absence of a 3D structure for TCR and for the TCR/peptide/MHC complex, several attempts to characterize the structural components of the TCR/peptide/MHC interaction have been made. However, this subject is still troublesome. In this paper a computer-based 3D model for a TCR/peptide/MHC complex (5C.C7/moth cytochrome c [MCC] peptide 93-103/I-Ek) was obtained. The complex surface shows a high complementarity between the 5C.C7 structure and the peptide/I-Ek molecule. The mapping of residues involved in the TCR/peptide/MHC interaction shows close agreement with mutational experiments (Jorgensen JL, Reay PA, Ehrich EW, Davis MM, 1992b, Annu Rev Immunol 10:835-873). Moreover, the results are consistent with a recent variability analysis of TCR sequences using three variability indexes (Almagro JC, Zenteno-Cuevas R, Vargas-Madrazo E, Lara-Ochoa F, 1995b, Int J Pept Protein Res 45:180-186). Accordingly, the 3D model of the 5C.C7/MCC peptide 93-103/I-Ek complex provides a framework to generate testable hypotheses about TCR recognition. Thus, starting from this model, the role played by each loop that forms the peptide/MHC binding site of the TCR is discussed.     

Alizarin interaction with sickle hemoglobin: elucidation of their anti-sickling properties by multi-spectroscopic and molecular modeling techniques

Abstract

Polymerization of hemoglobin S is a major cause of morbidity and mortality in sickle cell disease, which leads to sickling and destruction of red blood cell. Alizarin, a bioactive compound from Rubia cordifolia, is reported to be blood purifier. This study investigates the potential of alizarin as an anti-sickling agent, showing a significant decrease in the rate of polymerization, therefore inhibiting the rate of sickling with increasing concentration. Interaction studies indicated that the fluorescence intensity of sickle hemoglobin (Hb S) decreases gradually with increasing alizarin concentration. This suggests the static quenching, where binding constant and the number of binding sites were deduced at different temperatures. The negative values of Gibbs energy change (ΔG⁰) strongly suggest that it is entropy-driven spontaneous and exothermic reaction. Negative enthalpy (ΔH⁰) and positive entropy (ΔS⁰) stipulated that hydrogen and hydrophobic bonding forces were interfering in a hydrophobic micro-environment of β6Val leading to Hb S polymerization inhibition. In circular dichroism (CD) spectra, Hb S in the presence of alizarin shows helical structural changes leading to destabilization of Hb S polymer. These findings were also supported by molecular docking simulation studies using DOCK6 and GROMACS. So, from these findings, we may conclude that alizarin interacts with Hb S through hydrogen bonding and leading to inhibition of Hb S polymerization. Consequently, alizarin may have potential use as an anti-sickle cell medication for sickle cell disorder.

Communicated by Ramaswamy H. Sarma     

Conformation dependence of the CαDα stretch mode in peptides. II. Explicitly hydrated alanine peptide structures

Our previous studies of the potential utility of the C^αD^α stretch frequency, ν(CD), as a tool for determining conformation in peptide systems (Mirkin and Krimm, J Phys Chem A 2004, 108, 10923–10924; 2007, 111, 5300–5303) dealt with the spectroscopic characteristics of isolated alanine peptides with α_R, β, and polyproline II structures. We have now extended these ab initio calculations to include various explicit‐water environments interacting with such conformers. We find that the structure‐discriminating feature of this technique is in fact enhanced as a result of the conformation‐specific interactions of the bonding waters, in part due to our finding (Mirkin and Krimm, J Phys Chem B 2008, 112, 15268) that C^α? D^α…O(water) hydrogen bonds can be present in addition to those expected between water and the CO and NH of the peptide groups. In fact, ν(CD) is hardly affected by the latter bonding but can be shifted by up to 70 cm^?1 by the former hydrogen bonds. We also discuss the factors that will have to be considered in developing the molecular dynamics (MD) treatment needed to satisfactorily take account of the influence of outer water layers on the structure of the first‐layer water molecules that hydrogen bond to the peptide backbone. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 791–800, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The heparin-Ca(2+) interaction: the influence of the O-sulfation pattern on binding

The specific binding of Ca(2+) to synthetic hexasaccharide models of modified heparin has been investigated by NMR and molecular modeling and compared with previous results on a model of regular heparin. These two models represent the regular region of heparin lacking one type of O-sulfate group, either at C-6 of glucosamine or at C-2 of iduronate. The NMR experiments show different responses to the presence of Ca(2+). In the case of the compound lacking O-sulfate groups at C-2, the results are indicative of specific binding similar to that observed for the regular heparin, while the model lacking sulfate groups in position 6 interacts more weakly with Ca(2+). In order to understand the basis of this difference, a molecular modeling study based on a rigid body docking approach of the interaction of these carbohydrates with Ca(2+) and Na(+) was performed. We have found that the results are strongly dependent on the starting orientation of the lateral side chains of the charged groups of the carbohydrate, and that the best agreement with the experimental results is obtained when the starting conformations are taken from previous simulations in the presence of Ca(2+).     

Study on the interaction of taiwaniaquinoids with FTO by spectroscopy and molecular modeling

In this work, an attempt has been made to study the interaction of four taiwaniaquinoids with fat mass and obesity-associated protein (FTO) by UV–vis absorption, fluorescence spectroscopy, and molecular docking techniques. The results indicated that taiwaniaquinoids effectively quenched the intrinsic fluorescence of FTO via static quenching. According to the binding constants and thermodynamic parameters at three different temperatures, the hydrophobic force and electrostatic interactions appeared be the predominant intermolecular forces in stabilizing the complex. Results revealed that W-4 was the strongest quencher and W-3 was the weakest. The results of synchronous and three-dimensional fluorescence spectra showed that the conformation of FTO was changed. In addition, the influence of molecular structure on the quenching effect has been investigated.     

Computer assisted simulations and molecular graphics methods in molecular design. 1. Theory and applications to enzyme active-site directed drug design

A survey is presented of model building techniques, computer-assisted molecular dynamics simulations and a new theory of enzyme catalysis. Some aspects of the theoretical formalism are given. Enzyme active-site directed drug design is illustrated with examples taken from molecular modeling studies using FAD-containing disulphide oxidoreductases, proteinases and carbonic anhydrases.     

Molecular modeling and multi‐spectroscopic approaches to study the interaction between antibacterial drug and human immunoglobulin G

Mechanistic and conformational studies on the interaction of sulfamethoxazole (SMX) with human immunoglobulin G (HIgG) were performed by molecular modeling and multi‐spectroscopic methods. The interaction mechanism was firstly predicted through molecular modeling that confirmed the interaction between SMX and HIgG. The binding parameters and thermodynamic parameters at different temperatures had been calculated according to the Stern?Volmer, Scatchard, Sips and Van ’t Hoff equations, respectively. Experimental results showed that the fluorescence intensity of HIgG was quenched by the gradual addition of SMX. The binding constants of SMX with HIgG decreased with the increase of temperature, which meant that the quenching mechanism was a static quenching. Meanwhile, the results also confirmed that there was one independent class of binding site on HIgG for SMX during their interaction. The thermodynamic parameters of the reaction, namely standard enthalpy ΔH⁰ and entropy ΔS⁰, had been calculated to be ?14.69 kJ·mol^?1 and 22.99 J·mol^?1·K^?1, respectively, which suggested that the electrostatic and hydrophobic interactions were the predominant intermolecular forces in stabilizing the SMX?HIgG complex. Furthermore, experimental results obtained from three‐dimensional fluorescence spectroscopy, UV?vis absorption spectroscopy and circular dichroism (CD) spectroscopy confirmed that the conformational structure of HIgG was altered in the presence of SMX. Copyright © 2015 John Wiley & Sons, Ltd.