Commercial lipase immobilization on Accurel MP 1004 porous polypropylene

Three commercial lipases (CLs), A Amano 6 (from Aspergillus niger), M Amano 10 (from Mucor javanicus), and R Amano (from Penicillium roqueforti) – called lipase A, M and R respectively – were characterized in terms of carbohydrate content, protein content and enzymatic activity (p-nitrophenylacetate assay). All the CL preparations contained different proteins as observed from electrophoresis. Lipases were immobilized on Accurel MP1004 porous polypropylene by physical adsorption.The Immobilization process caused a loss of enzymatic activity. The retained activity was similar for lipase M and R (about 15%). In contrast, lipase A retained only the 1.3% of the specific activity of the free lipase. The retained activity of lipases M and R seems to be due to a feature of the support, while the lower activity a of lipase A may be attributed to a strong structure distortion caused by lipase–support interaction.     

多孔纳米材料固定化酶研究进展

酶是一种天然生物催化剂,有催化效率高、底物选择性强和绿色环保等优点,但酶结构不稳定且重复利用率低,制约了其产业化应用。随着技术的发展,酶的固定化可以提高酶的活性和稳定性,为生物酶的工程化应用带来了新的机遇。多孔纳米材料具有比表面积大、孔隙率高、机械和化学性能稳定等特点和优异的成本效益,是理想的固定化酶载体。本文综述了近些年来金属有机框架、共价有机框架和多孔微球等纳米材料固定化酶的研究进展和应用,重点介绍了载体固定酶的方式,并总结了每种载体的特点,最后讨论了多孔纳米材料固定化酶面临的挑战和发展趋势。     

Evaluation of cellulose-binding domain fused to a lipase for the lipase immobilization

A cellulose-binding domain (CBD) fragment of a cellulase gene of Trichoderma hazianum was fused to a lipase gene of Bacillus stearothermophilus L1 to make a gene cluster for CBD-BSL lipase. The specific activity of CBD-BSL lipase for oil hydrolysis increased by 33% after being immobilized on Avicel (microcrystalline cellulose), whereas those of CBD-BSL lipase and BSL lipase decreased by 16% and 54%, respectively, after being immobilized on silica gel. Although the loss of activity of an enzyme immobilized by adsorption has been reported previously, the loss of activity of the CBD-BSL lipase immobilized on Avicel was less than 3% after 12 h due to the irreversible binding of CBD to Avicel.     

Simple and efficient immobilization of lipase B from Candida antarctica on porous styrene-divinylbenzene beads

Two commercial porous styrene-divinylbenzene beads (Diaion HP20LX and MCI GEL CHP20P) have been evaluated as supports to immobilize lipase B from Candida antarctica (CALB). MCI GEL CHP20P rapidly immobilized the enzyme, permitting a very high loading capacity: around 110 mg CALB/wet g of support compared to the 50 mg obtained using decaoctyl Sepabeads. Although enzyme specificity of the enzyme immobilized on different supports was quite altered by the support used in the immobilization, specific activity of the enzyme immobilized on MCI GEL CHP20P was always higher than those found using decaoctyl Sepabeads for all assayed substrates. Thus, a CALB biocatalyst having 3-8 folds (depending on the substrate) higher activity/wet gram of support than the commercial Novozym 435 was obtained. Half-live of CAL-Diaion HP20LX at 60 °C was 2-3 higher than the one of Novozym 435, it was 30-40 higher in the presence of 50% acetonitrile and it was around 100 folds greater in the presence of 10 M hydrogen peroxide.Results indicate that styrene-divinylbenzene supports may be promising alternatives as supports to immobilize CALB.     

A study of the adsorption of bacterial cells on porous materials

The paper presents experimental data on the adsorption of bacterial cells on porous materials.Translated from Mikrobiologiya, Vol. 73, No. 6, 2004, pp. 810–816.Original Russian Text Copyright © 2004 by Samonin, Elikova.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Comparison of physical and covalent immobilization of lipase from Candida antarctica on polyamine microspheres of alkylamine matrix

Abstract

Polyamine microspheres (PA-M) prepared using polyethyleneimine as matrix were used for the immobilization of Candida antarctica lipase. The isoelectric point of PA-M is 10.6, and the hydrophobicity of PA-M was indicated using naphthalene. Optimization of conditions showed that the maximal loading of lipase on PA-M reached 230.2 mg g^{? 1} at pH 9.0 and 35°C. An increased buffer concentration had no effect on the activity of lipase but decreased the amount of lipase adsorbed. Simulation with Langmuir and Freundlich isotherms demonstrated that the adsorption of lipase on PA-M was thermodynamically favorable. Covalent crosslinking of the lipase adsorbed extended the pH range and increased the optimal temperature of the lipase activity. The physically adsorbed lipase (P-lipase) and the covalently immobilized derivative (C-lipase) retained more than 75% and 85% of their initial activity, respectively, after 10 cycles of usage. The half-lives of P-lipase and C-lipase at 50°C were 15.70 and 27.67 times higher than that of the free enzyme, respectively. Compared to P-lipase, covalent immobilization obviously reduced the catalytic efficiency and activation energy of the enzyme.     

Introduction of functional groups onto polypropylene and polyethylene surfaces for immobilization of enzymes

Polypropylene and polyethylene surfaces are activated by introducing an active functional group through 1-fluoro-2 nitro-4-azidobenzene by UV irradiation. Horseradish peroxidase and glucose oxidase are immobilized onto the activated surfaces, simply by incubating the enzymes at 37 degrees C. When untreated surfaces are used, insignificant immobilization of the enzymes is observed.     

Distribution of immobilized enzymes on porous membranes

In this article, the results from a theoretical and experimental investigation of enzyme immobilization in porous membranes are reported. A theoretical model of the immobilization process, which accounts for restricted diffusion of enzyme in the pores of the membrane, has been developed. The model predicts the effect of immobilization kinetics and time of immobilization on the enzyme distribution in the pores of the membrane. The immobilization of glucose oxidase and glucose oxidase-biotin conjugate on porous alumina membranes was experimentally investigated. Enzyme uptake data was correlated to the theory to determine the rate constant of imobilization and the distribution of the enzyme in the pore. Immobilization studies were carried out for enzyme adsorption and for enzyme attachment by covalent coupling. The distribution of enzyme was experimentally studied by assembling five membranes in the diffusion cell. Following immobilization, the membranes were separated and each was assayed for activity. The amount of active enzyme present in each membrane yielded a discrete distribution that compared well with that predicted by theory. (c) 1992 John Wiley & Sons, Inc.     

Site-directing an intense multipoint covalent attachment (MCA) of mutants of the Geobacillus thermocatenulatus lipase 2 (BTL2): Genetic and chemical amination plus immobilization on a tailor-made support

Immobilized enzymes are preferred over their soluble counterparts due to their robustness in harsh industrial processes; the most stable enzyme derivatives are often produced through multipoint covalent attachment (MCA). However, most enzymes are unable to establish optimal MCA to electrophile-type supports given the heterogeneous distribution and/or low content of primary amino groups on their surfaces; this restricts both the diversity of areas prone to react and the number of attachments to the support. To overcome this we propose combining site-directed immobilization and protein engineering to increase the number of bonds between a specific enzyme surface and a tailor-made support. We applied this novel strategy to engineered mutants of the lipase 2 from Geobacillus thermocatenulatus with one Cys exposed residue, that after genetic amination and/or chemical amination, were immobilized on glyoxyl-disulfide support using a site-directed MCA protocol. Two highly stabilized derivatives of chemically aminated lipase variants, in which site-directed MCA implied the surrounding surface of residues Cys344 or Cys40, were produced: the first one was 2.4-fold more productive than the reference derivative (648 g of hydrolyzed ester); the second derivative was 40% more selective (EPA/DHA molar ratio) and as active (1 μmol g catalyst⁻¹ min⁻¹) as the reference in the production of PUFAs.     

Effect of hydrophobicity degree of polymer particles on lipase immobilization and on biocatalyst performance

Abstract

Many studies describe the advantages of using hydrophobic particles on lipase immobilisation. However, many of these works neglect the effect of other variables of the supports, such as specific area and porosity, on the biocatalyst performance, and do not evaluate the influence of the hydrophobicity level of the particles on the biocatalysts’ activity as a single variable. Thus, the focus of the present work was to evaluate the effect of the hydrophobicity degree of polymeric particles on the biocatalysts’ activities, mitigating the influence of other variables. The study was divided into two steps. Firstly, distinct particles, exhibiting different composition and hydrophobicity levels, were used for the immobilization of a commercial lipase B from Candida antarctica (CAL-B). Then, distinct core-shell polymeric particles presenting different functional compounds on the surface were produced, using as comonomers styrene, divinylbenzene, 1-octene, vinylbenzoate and cardanol. Such particles were subsequently used for CAL-B immobilisation and the performance of the biocatalysts was evaluated on hydrolysis (using p-nitrophenyl laurate, as substrate) and esterification (using ethanol and oleic acid, as substrate) reactions. Based on the screening step, it was observed that for non-porous particles the correlation coefficients between the hydrophobicity level of the supports and the biocatalysts performance, for both hydrolysis and esterification reactions, were very low (0.32 and 0.45, respectively). It highlights that there was no significant correlation between these variables and that, probably, the chemical composition of the polymeric chains affects more significantly the biocatalyst performance. Then, analysing the subsequent stage, it was observed that small changes in the surface composition of the core-shell particles result in significant changes on the textural properties of the supports (specific area ranging from 1.2?m².g^?1 to 18.3?m².g^?1; and contact angles ranging from 71° (hydrophilic particles) to 92° (hydrophobic supports) when polymer films were put in contact with water). Such particles were also employed on CAL-B immobilization and it was noticed that higher correlation coefficients were achieved for hydrolysis (ρ?=?0.53) and esterification (ρ?=?0.74) reactions. Therefore, it is shown that the hydrophobicity degree of such supports starts to affect more effectively the biocatalysts performance when other textural features of the supports become more significant, such as specific area and porosity.     

Purification, immobilization, and characterization of a specific lipase from Staphylococcus warneri EX17 by enzyme fractionating via adsorption on different hydrophobic supports

Staphylococcus warneri strain EX17 produces three lipases with different molecular weights of 28, 30, and 45 kDa. The 45 kDa fraction (SWL-45) has been purified from crude protein extracts by one chromatographic step based on the selective adsorption of this lipase by interfacial activation on different hydrophobic supports at low ionic strength. The adsorption of SWL-45 on octyl-Sepharose increased the enzyme activity by 60%, but the other lipases were also adsorbed on this support. Using butyl-Toyopearl, which is a lesser hydrophobic support, the purification factor was close to 20, and the only protein band detected on the sodium dodecyl sulfate-polyacrylamide electrophoresis analysis gel was that corresponding to the SWL-45, which could be easily desorbed from the support by incubation with triton X-100, producing a purified enzyme. SWL-45 was immobilized under very mild conditions on cyanogen bromide Sepharose, showing similar activities and stability as for its soluble form but without intermolecular interaction. The effects of different detergents over the activity of the immobilized SWL-45 were analyzed, which was hyperactivated by factors of 1.3 and 2.5 with 0.01% Tween 80 and 0.1% Triton X-100, respectively, while ionic detergents produced detrimental effects on the enzyme activity even at very low concentrations. Optimal reaction conditions and the effect of other additives on the enzyme activity were also investigated.     

A convenient method to study fungal spores retention on a porous preformed support

A method was developed to determine engineering parameters of a preformed porous cellulose carrier, commercially known as Microcube. It demonstrated a high water retention (20 g g^–1 dry support) connected to a wet support density slightly higher than that of water (1.005 g ml^–1), making this material suitable for use in stirred vessels; a high porosity (96%) was also evidenced. Ungerminated spores of Aspergillus niger reversibly adsorbed on the carrier according to a Langmuir-type isotherm, while germinating conidia irreversibly attached to particles, allowing a further pellet-like development.     

Multipoint covalent immobilization of microbial lipase on chitosan and agarose activated by different methods

In this work Candida antarctica lipase type B (CALB) was immobilized on agarose and chitosan. The influence of activation agents (glycidol, glutaraldehyde and epichlorohydrin) and immobilization time (5, 24 and 72 h) on hydrolytic activity, thermal and alkaline stabilities of the biocatalyst was evaluated. Protein concentration and enzymatic activity in the supernatant were determined during the immobilization process. More active derivatives were attained when the enzymatic extract was first purified through dialysis. The highest activities achieved were: for agarose-glyoxyl (with glycidol), 845 U/g of gel, after 72 h of immobilization; for chitosan-glutaraldehyde and agarose-glutaraldehyde, respectively, 1209 U/g of gel and 2716 U/g of gel, after 5 h of immobilization. Thermal stability was significantly increased, when compared to the soluble enzyme: 20-fold for agarose-glyoxyl (with glycidol)-CALB, 18-fold for chitosan-glutaraldehyde-CALB and 21-fold for agarose-glutaraldehyde. The best derivative, 58-fold more stable than the soluble enzyme, was obtained when CALB was immobilized on chitosan activated in two steps, using glycidol and glutaraldehyde, 72 h immobilization time. The stabilization degree of the derivative increased with the immobilization time, an indication that a multipoint covalent attachment between enzyme and the support had really occurred.     

多级孔金属-有机框架固定化酶的研究进展

金属-有机框架(metal-organic frameworks, MOFs)作为酶固定化的优良载体,为生物催化反应提供优越的物理和化学保护。近年来,多级孔金属-有机框架(hierarchical porous metal-organic frameworks, HP-MOFs)由于其独特的结构优势,在固定化酶方面显示出更大的潜力。到目前为止,已经开发了各类具有原生多级孔或缺陷多级孔的HP-MOFs用于酶的固定化研究,并且使得固定化酶在催化活性、稳定性和重复利用性等方面得到了显著增强。本文系统总结了HP-MOFs用于固定化酶的各种策略,介绍了HP-MOFs固定化酶(enzyme@HP-MOFs)在催化合成、生物传感、生物医药等领域的最新应用进展。最后,讨论并展望了HP-MOFs固定化酶这一领域所面临的挑战和机遇。     

Immobilization of Candida rugosa lipase on colloidal gas aphrons (CGAs)

A novel technique for immobilization of Candida rugosa lipase onto anionic colloidal gas aphrons (CGAs) is described. CGAs are spherical microbubbles (10-100 microm) composed of an inner gas core surrounded by a surfactant shell. In this initial study, greater than 80% lipase (w/w) was effectively retained on the CGAs. Leakage of protein from the CGAs and the activity of the adsorbed lipase decreased with increasing enzyme loading; this indicates that multilayers of lipase may be adsorbing onto the CGAs. The CGA-immobilised lipase displayed normal Michaelis-Menten dependence on substrate concentration and also exhibited greater activity than the free enzyme.     

Improvement of lipase activity by synergistic immobilization on polyurethane and its application for large-scale synthesizing vitamin A palmitate

Abstract

We have developed an improved and effective method to immobilize lipase on hydrophobic polyurethane foam (PUF) with different modifications. PUF was treated with hydrochloric acid to increase the active sites and then the active carboxyl groups and amino groups were exposed. Enzyme activity of lipase immobilized on PUF-HCL (8000?U/g) was 50% higher than that of lipase immobilized on PUF (5300?U/g). There is an increase in the activity of the immobilized lipase on AA/PEI-modified support (115,000?U/g), a 2.17-fold increase compared to lipase immobilized on the native support was observed. The activity of immobilized lipases was dependent on the PEI molecular weight, with best results from enzyme immobilized on PUF-HCL-AA/PEI (MW 70,000?Da, 12,800?U/g)), which was 2.41 times higher compared to that of the same enzyme immobilized on PUF. These results suggest that the activity of immobilized lipase is influenced by the support surface properties, and a moderate support surface micro-environment is crucial for improving enzyme activity. Finally, the immobilized lipase was used for the production of vitamin A palmitate. The immobilized lipase can be reused for up to 18 times with a conversion rate above 90% for 12?h in a 3?L bioreactor.

• Research highlights

• An efficient immobilization protocol on polyurethane foam was developed

• Polyethyleneimine and acetic acid were used to regulate the micro-environment concurrently

• The activity of lipase immobilized on PUF-HCL-AA/PEI was improved by 2.41 times

• Immobilized lipase exhibited excellent operational stability for vitamin A palmitate synthesis

     

Immobilization of lipase B from Candida antarctica on porous styrene-divinylbenzene beads improves butyl acetate synthesis

A new biocatalyst of lipase B from Candida antarctica (MCI-CALB) immobilized on styrene-divinylbenzene beads (MCI GEL CHP20P) was compared with the commercial Novozym 435 (immobilized lipase) in terms of their performances as biocatalysts for the esterification of acetic acid and n-butanol. The effects of experimental conditions on reaction rates differed for each biocatalyst, showing different optimal values for water content, temperature, and substrate molar ratio. MCI-CALB could be used at higher acid concentrations, up to 0.5 M, while Novozym 435 became inactivated at these acid concentrations. Although Novozym 435 exhibited 30% higher initial activity than MCI-CALB for the butyl acetate synthesis, the reaction course was much more linear using the new preparation, meaning that the MCI-CALB allows for higher productivities per cycle. Both preparations produced around 90% of yield conversions after only 2 h of reaction, using 10% (mass fraction) of enzyme. However, the main advantage of the new biocatalyst was the superior performance during reuse. While Novozym 435 was fully inactivated after only two batches, MCI-CALB could be reused for six consecutive cycles without any washings and keeping around 70% of its initial activity. It is proposed that this effect is due to the higher hydrophobicity of the new support, which does not retain water or acid in the enzyme environment. MCI-CALB has shown to be a very promising biocatalyst for the esterification of small-molecule acids and alcohols.     

Immobilization on octyl-agarose beads and some catalytic features of commercial preparations of lipase a from Candida antarctica (Novocor ADL): Comparison with immobilized lipase B from Candida antarctica

Lipase A from Candida antarctica (CALA, commercialized as Novocor ADL) was immobilized on octyl-agarose, which is a very useful support for lipase immobilization, and coated with polyethylenimine to improve the stability. The performance was compared to that of the form B of the enzyme (CALB) immobilized on the same support, as both enzymes are among the most popular ones used in biocatalysis. CALA immobilization produced a significant increase in enzyme activity vs. p-nitrophenyl butyrate (pNPB) (by a factor of seven), and the coating with PEI did not have a significant effect on enzyme activity. CALB reduced its activity slightly after enzyme immobilization. Octyl-CALA was less stable than octyl-CALB at pH 9 and more stable at pH 5 and, more clearly, at pH 7. PEI coating only increased octyl-CALA stability at pH 9. In organic solvents, CALB had much better stability in methanol and was similarly stable in acetonitrile or dioxane. In these systems, the PEI coating of octyl-CALA permitted some stabilization. While octyl-CALA was more active vs. pNPB, octyl-CALB was much more active vs. mandelic esters or triacetin. Thus, depending on the specific reaction and the conditions, CALA or CALB may offer different advantages and drawbacks. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2735, 2019