Decorin binds fibrinogen in a Zn2+-dependent interaction

We have previously shown that decorin, a member of the small leucine-rich proteoglycan family of extracellular matrix proteoglycans/glycoproteins is a Zn(2+) metalloprotein at physiological Zn(2+) concentrations (Yang, V. W-C., LaBrenz, S. R., Rosenberg, L. C., McQuillan, D., and H??k, M. (1999) J. Biol. Chem. 274, 12454-12460). We now report that the decorin proteoglycan binds fibrinogen in the presence of Zn(2+). The fibrinogen-binding site is located in the N-terminal domain of the decorin core protein and a 45-amino acid peptide representing this domain binds to the fibrinogen D fragment with an apparent K(D) of 1.7 x 10(-6) m, as determined from fluorescence polarization data. Furthermore, we show that Zn(2+) promotes the self-association of decorin. The N-terminal domain of the core protein also mediates this activity. The results of solid-phase binding assays and gel filtration chromatography suggest that the N-terminal domain of decorin, when present at low micromolar concentrations, forms an oligomer in a Zn(2+)-dependent manner. Thus, Zn(2+) appears to play a pivotal role in the interactions and biological function of decorin.     

Department of Protein Structure and Function--Volodimir Oleksandrovich Bielitser School of the Ukrainian Academy of Sciences. Studies on structure of fibrin fiber structure and mechanism (1975-1987

In this short historical review the records about foundation and research activity of the Department of Structure and Function of Protein--school of V. A. Belitser, Member of the National Academy of Sciences of Ukraine are presented. V. A. Belitser was the founder and indispensable chief of the department since the date of its creation (1944) till 1987. The main research interests (1975-1987) of the department were focused at the investigation of structure, biological function of the fibrinogen-fibrin system, mechanisms of the network assembly and of the fibrin fibers structure. Studying the molecular mechanisms of the fibrin fiber assembly, it was shown that the specificity of the building structure was shown is determined by the specific reactive sites with strong affinity of the molecules. The activity of the sites was investigated on protein molecules as well as the fragments. The physical nature of the bonds created by the active sites, that appearing during in the process of fibrinogen activation by thrombin, was revealed. Examination of the fibrin assembly in cooperation with electronmicroscopists and studies of the complex formation between active fragments and fibrin monomer were summarized. Both the fibrin monomer polymerization and protofibril lateral association are presented as two stages in the assembly of the fibrin network. In the research of the domain fibrinogen structure the specific sites of the fibrin assembly in each of the domains were found. COOH-terminal regions of the A alpha-chains play independent part in the fibrinogen and fibrin. That is why it is relevant to consider them as alpha C-domains. In the free fibrinogen molecules (in solution) these domains are responsible for globular shape, they are linked to domains D intramolecularly. When fibrin assembly takes place, alpha C-domains play significant carriage role in fibrin molecules interaction, linking to domains D intermolecularly. The model of the fibrinogen molecule structure and the general scheme of the fibrin fibers network formation were proposed. Physico-chemical basics of a biological structure assembly were elucidated using the process of the fibrin self-assembly as an example. Much attention was devoted to the problems of practical medicine. The quantitative methods of fibrinogen, soluble fibrin and active fibrin/fibrinogen fragments estimation in blood plasma were developed.     

Effects of hyaluronic acid and other glycosaminoglycans on fibrin polymer formation

Previously, we reported that the glycosaminoglycan (GAG) hyaluronic acid (HA) specifically bound to the plasma protein fibrinogen [LeBoeuf, R. D., Raja, R. R., Fuller, G. M., & Weigel, P. H. (1986) J. Biol. Chem. 261, 12586]. The binding of other macromolecules to fibrinogen could influence the conversion of fibrinogen to fibrin. Therefore, we tested whether HA and other GAGs could alter the kinetics of fibrin polymer formation and the physical structure of the resulting gel. In this study, we present data showing that the GAGs HA and chondroitin sulfate (CS) affect fibrin formation in three specific ways: (i) they decreased the clotting time of fibrinogen 3-10-fold; (ii) both GAGs increase significantly the rate of fibrin polymer formation; and (iii) fibrin gels containing HA or CS had a final A450 that was greater than controls, indicating that these two glycosaminoglycans influence either the final size of fibrin fibrils or the extent of the lateral association between fibrils. These results demonstrate that the interactions of HA and CS with forming fibrin polymers can alter both the kinetics of formation and may produce structural changes in fibrin gels.     

Distinct secondary structures of the leucine-rich repeat proteoglycans decorin and biglycan. Glycosylation-dependent conformational stability

Biglycan and decorin have been overexpressed in eukaryotic cells and two major glycoforms isolated under native conditions: a proteoglycan substituted with glycosaminoglycan chains; and a core protein form secreted devoid of glycosaminoglycans (Hocking, A. M., Strugnell, R. A., Ramamurthy, P., and McQuillan, D. J. (1996) J. Biol. Chem. 271, 19571-19577; Ramamurthy, P., Hocking, A. M., and McQuillan, D. J. (1996) J. Biol. Chem. 271, 19578-19584). Far-UV CD spectroscopy of decorin and biglycan proteoglycans indicates that, although they are predominantly beta-sheet, biglycan has a significantly higher content of alpha-helical structure. Decorin proteoglycan and core protein are very similar, whereas the biglycan core protein exhibits closer similarity to the decorin glycoforms than to the biglycan proteoglycan form. However, enzymatic removal of the chondroitin sulfate chains from biglycan proteoglycan does not induce a shift to the core protein structure, suggesting that the final form is influenced by polysaccharide addition only during biosynthesis. Fluorescence emission spectroscopy demonstrated that the single tryptophan residue, which is at a conserved position at the C-terminal domain of both biglycan and decorin, is found in similar microenvironments. This indicates that in this specific domain the different glycoforms do exhibit apparent conservation of structure. Exposure of decorin and biglycan to 10 M urea resulted in an increase in fluorescent intensity, which indicates that the emission from tryptophan in the native state is quenched. Comparison of urea-induced protein unfolding curves provide further evidence that decorin and biglycan assume different structures in solution. Decorin proteoglycan and core protein unfold in a manner similar to a classic two-state model, in which there is a steep transition to an unfolded state between 1 and 2 M urea. The biglycan core protein also shows a similar steep transition. However, biglycan proteoglycan shows a broad unfolding transition between 1 and 6 M urea, probably indicating the presence of stable unfolding intermediates.     

The ultrastructure of fibrinogen-420 and the fibrin-420 clot

Fibrinogen-420 is a minor subclass of human fibrinogen that is so named because of its higher molecular weight compared to fibrinogen-340, the predominant form of circulating fibrinogen. Each of the two Aalpha chains of fibrinogen-340 is replaced in fibrinogen-420 by an Aalpha isoform termed alphaE. Such chains contain a globular C-terminal extension, alphaEC, that is homologous with the C-terminal regions of Bbeta and gamma chains in the fibrin D domain. The alphaEC domain lacks a functional fibrin polymerization pocket like those found in the D domain, but it does contain a binding site for beta2 integrins. Electron microscopy of fibrinogen-340 molecules showed the major core fibrinogen domains, D-E-D, plus globular portions of the C-terminal alphaC domains. Fibrinogen-420 molecules had two additional globular domains that were attributable to alphaEC. Turbidity measurements of thrombin-cleaved fibrinogen-420 revealed a reduced rate of fibrin polymerization and a lower maximum turbidity. Thromboelastographic measurements also showed a reduced rate of fibrin-420 polymerization (amplitude development) compared with fibrin-340. Nevertheless, the final amplitude (MA) and the calculated elastic modulus (G) for fibrin-420 were greater than those for fibrin-340. These results suggested a greater degree of fibrin-420 branching and thinner matrix fibers, and such structures were found in SEM images. In addition, fibrin-420 fibers were irregular and often showed nodular structures protruding from the fiber surface. These nodularities represented alphaEC domains, and possibly alphaC domains as well. TEM images of negatively shadowed fibrin-420 networks showed irregular fiber borders, but the fibers possessed the same 22.5-nm periodicity that characterizes all fibrin fibers. From this result, we conclude that fibrin-420 fiber assembly occurs through the same D-E interactions that drive the assembly of all fibrin fibrils, and therefore that the staggered overlapping molecular packing arrangement is the same in both types of fibrin. The alphaEC domains are arrayed on fiber surfaces, and in this location, they would very likely slow lateral fibril association, causing thinner, more branched fibers to form. However, their location on the fiber surface would facilitate cellular interactions through the integrin receptor binding site.     

Incorporation of vitronectin into fibrin clots. Evidence for a binding interaction between vitronectin and gamma A/gamma' fibrinogen.

Vitronectin is an abundant plasma protein that regulates coagulation, fibrinolysis, complement activation, and cell adhesion. Recently, we demonstrated that plasma vitronectin inhibits fibrinolysis by mediating the interaction of type 1 plasminogen activator inhibitor with fibrin (Podor, T. J., Peterson, C. B., Lawrence, D. A., Stefansson, S., Shaughnessy, S. G., Foulon, D. M., Butcher, M., and Weitz, J. I. (2000) J. Biol. Chem. 275, 19788-19794). The current studies were undertaken to further examine the interactions between vitronectin and fibrin(ogen). Comparison of vitronectin levels in plasma with those in serum indicates that approximately 20% of plasma vitronectin is incorporated into the clot. When the time course of biotinylated-vitronectin incorporation into clots formed from (125)I-fibrinogen is monitored, vitronectin incorporation into the clot parallels that of fibrinogen in the absence or presence of activated factor XIII. Vitronectin binds specifically to fibrin matrices with an estimated K(d) of approximately 0.6 microm. Additional vitronectin subunits are assembled on fibrin-bound vitronectin multimers through self-association. Confocal microscopy of fibrin clots reveals the globular vitronectin aggregates anchored at intervals along the fibrin fibrils. This periodicity raised the possibility that vitronectin interacts with the gamma A/gamma' variant of fibrin(ogen) that represents about 10% of total fibrinogen. In support of this concept, the vitronectin which contaminates fibrinogen preparations co-purifies with the gamma A/gamma' fibrinogen fraction, and clots formed from gamma A/gamma' fibrinogen preferentially bind vitronectin. These studies reveal that vitronectin associates with fibrin during coagulation, and may thereby modulate hemostasis and inflammation.     

Multiple interactions of FbsA, a surface protein from Streptococcus agalactiae, with fibrinogen: affinity, stoichiometry, and structural characterization

Streptococcus agalactiae is an etiological agent of several infective diseases in humans. We previously demonstrated that FbsA, a fibrinogen-binding protein expressed by this bacterium, elicits a fibrinogen-dependent aggregation of platelets. In the present communication, we show that the binding of FbsA to fibrinogen is specific and saturable, and that the FbsA-binding site resides in the D region of fibrinogen. In accordance with the repetitive nature of the protein, we found that FbsA contains multiple binding sites for fibrinogen. By using several biophysical methods, we provide evidence that the addition of FbsA induces extensive fibrinogen aggregation and has noticeable effects on thrombin-catalyzed fibrin clot formation. Fibrinogen aggregation was also found to depend on FbsA concentration and on the number of FbsA repeat units. Scanning electron microscopy evidentiated that, while fibrin clot is made of a fine fibrillar network, FbsA-induced Fbg aggregates consist of thicker fibers organized in a cage-like structure. The structural difference of the two structures was further indicated by the diverse immunological reactivity and capability to bind tissue-type plasminogen activator or plasminogen. The mechanisms of FbsA-induced fibrinogen aggregation and fibrin polymerization followed distinct pathways since Fbg assembly was not inhibited by GPRP, a specific inhibitor of fibrin polymerization. This finding was supported by the different sensitivity of the aggregates to the disruptive effects of urea and guanidine hydrochloride. We suggest that FbsA and fibrinogen play complementary roles in contributing to thrombogenesis associated with S. agalactiae infection.     

Characterization of the fibrin polymer structure that accelerates thrombin cleavage of plasma factor XIII

The effect of plasmin-derived fibrin(ogen) degradation products on alpha-thrombin cleavage of plasma Factor XIII was studied to identify the fibrin polymer structure that promotes Factor XIIIa formation. Fibrin polymers derived from fibrinogen and Fragment X enhanced the rate of thrombin cleavage of plasma Factor XIII in plasma or buffered solutions. The concentrations of fibrinogen and Fragment X that promoted half-maximal rates of Factor XIIIa formation were 5 and 40 micrograms/ml, respectively. Fragments Y, D, E, D-dimer, and photooxidized fibrinogen did not enhance thrombin cleavage of Factor XIII. Although purified Fragment D1 inhibited fibrin gelation, the soluble protofibrils promoted thrombin activation of Factor XIII. Noncrosslinked fibrin fibers failed to enhance thrombin cleavage of Factor XIII. In conclusion, soluble fibrin oligomers function to promote thrombin cleavage of plasma Factor XIII during blood clotting.     

Human alpha-thrombin binding to nonpolymerized fibrin-Sepharose: evidence for an anionic binding region

In order to investigate ligand binding sites in alpha-thrombin that interact with nonpolymerized fibrin, fibrinogen was conjugated (with CNBr) to Sepharose 4B and converted to the nonpolymerized fibrin resin with alpha-thrombin. Human alpha-thrombin was bound to the resin at 22 degrees C and eluted with a linear NaCl gradient [50-300 mM in 50 mM tris(hydroxymethyl)aminomethane hydrochloride, pH 7.6] with midpeak elution occurring at an ionic strength that corresponds to 170 +/- 5 mM NaCl. Among various ligands examined, ATP and its analogues caused alpha-thrombin to elute with 125 mM or less salt. Apparent dissociation constants were estimated by the dependence of elution volume on ligand concentration. The most potent ligands for desorption from the column were anionic (e.g., adenine nucleotides), which also inhibit thrombin esterolytic/amidolytic and clotting activity [Conery, B. G., & Berliner, L. J. (1983) Biochemistry 22, 369-375]. The desorption series was at 10 mM concentrations: ATP = ADP greater than pyrophosphate greater than citrate greater than oxalate greater than PO4(3-). Contrastingly, serotonin and related apolar compounds did not cause dissociation of alpha-thrombin from the fibrin resin, even though several of these substances inhibit fibrinogen clotting and esterolytic/amidolytic activities of the enzyme. These data imply that independent sites for apolar and anionic binding in alpha-thrombin are required for converting fibrinogen into clottable fibrin and that alpha-thrombin-fibrin binding involves an anionic site.     

Substitution of gamma Arg-275 by Cys in an abnormal fibrinogen, "fibrinogen Osaka II". Evidence for a unique solitary cystine structure at the mutation site

In an abnormal fibrinogen with impaired fibrin monomer polymerization designed as fibrinogen Osaka II, we have identified substitution of Arg by Cys at position 275 of the gamma chain. This Cys is linked to a free cysteine molecule by a disulfide link as evidenced by fast atom bombardment mass spectrometry. This finding was supported by identification of a single cysteine released from isolated abnormal fragment D1 upon reduction. This unique cystine structure at the mutation site has not been reported heretofore in any abnormal protein including fibrinogen. The substitution may well perturb the structure required for fibrin monomer polymerization, specifically that assigned to the carboxyl-terminal D domain of fibrinogen. Indeed, isolated fragment D1 with the Cys substitution failed to inhibit thrombin-mediated clotting of normal fibrinogen and normal fibrin monomer polymerization, while normal fragment D1 inhibited them markedly. Our data seem to provide supporting evidence that the putative polymerization site(s) assigned to the D domain of fibrinogen may be structure-dependent, including the carboxyl-terminal segment of the gamma chain as well as a contiguous region that contains the gamma 275 residue.     

Fibrinogen Nagoya, a replacement of glutamine-329 by arginine in the gamma-chain that impairs the polymerization of fibrin monomer

Structural studies on a hereditary abnormal fibrinogen, fibrinogen Nagoya (Takamatsu, J., Ogata, K., Kamiya, T., Koie, K., Takagi, T., & Iwanaga, S. (1979) Thromb. Haemost. 42, 78), were performed to identify the abnormality responsible for the impaired polymerization of fibrin monomer. Upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis under reducing conditions, fibrinogen Nagoya showed the presence of an extra protein band with an apparent molecular weight of 49,500 in addition to the normal three subunit chains. Amino acid sequence analysis of a peptide isolated from a lysyl endopeptidase digest of one of the CNBr fragments derived from fibrinogen Nagoya indicated that Gln-329 in the gamma-chain had been replaced by Arg. This substitution can be explained by a single nucleotide change in the codon for Gln-329 (CAG----CGG). We conclude that Gln-329 in the gamma-chain is indispensable for the normal polymerization of fibrin monomer.     

Gly-Pro-Arg-Pro modifies the glutamine residues in the alpha- and gamma-chains of fibrinogen: inhibition of transglutaminase cross-linking

During blood clotting Factor XIIIa, a transglutaminase, catalyzes the formation of covalent bonds between the epsilon-amino group of lysine and the gamma-carboxamide group of peptide-bound glutamine residues between fibrin molecules. We report that glycyl-L-prolyl-L-arginyl-L-proline (GPRP), a tetrapeptide that binds to the fibrin polymerization sites (D-domain) in fibrin(ogen), inhibits transglutaminase cross-linking by modifying the glutamine residues in the alpha- and gamma-chains of fibrinogen. Purified platelet Factor XIIIa, and tissue transglutaminase from adult bovine aortic endothelial cells were used for the cross-linking studies. Gly-Pro (GP) and Gly-Pro-Gly-Gly (GPGG), peptides which do not bind to fibrinogen, had no effect on transglutaminase cross-linking. GPRP inhibited platelet Factor XIIIa-catalyzed cross-linking between the gamma-chains of the following fibrin(ogen) derivatives: fibrin monomers, fibrinogen and polymerized fibrin fibers. GPRP functioned as a reversible, noncompetitive inhibitor of Factor XIIIa-catalyzed incorporation of [3H]putrescine and [14C]methylamine into fibrinogen and Fragment D1. GPRP did not inhibit 125I-Factor XIIIa binding to polymerized fibrin, demonstrating that the Factor XIIIa binding sites on fibrin were not modified. GPRP also had no effect on Factor XIIIa cross-linking of [3H]putrescine to casein. This demonstrates that GPRP specifically modified the glutamine cross-linking sites in fibrinogen, and had no effect on either Factor XIIIa or the lysine residues in fibrinogen. GPRP also inhibited [14C]putrescine incorporation into the alpha- and gamma-chains of fibrinogen without inhibiting beta-chain incorporation, suggesting that the intermolecular cross-linking sites were selectively affected. Furthermore, GPRP inhibited tissue transglutaminase-catalyzed incorporation of [3H]putrescine into both fibrinogen and Fragment D1, without modifying [3H]putrescine incorporation into casein. GPRP also inhibited intermolecular alpha-alpha-chain cross-linking catalyzed by tissue transglutaminase. This demonstrates that the glutamine residues in the alpha-chains involved in intermolecular cross-linking are modified by GPRP. This is the first demonstration that a molecule binding to the fibrin polymerization sites on the D-domain of fibrinogen modifies the glutamine cross-linking sites on the alpha- and gamma-chains of fibrinogen.     

High-resolution visualization of fibrinogen molecules and fibrin fibers with atomic force microscopy

We report an atomic force microscopy (AFM) study of fibrinogen molecules and fibrin fibers with resolution previously achieved only in few electron microscopy images. Not only are all objects triads, but the peripheral D regions are resolved into the two subdomains, apparently corresponding to the βC and γC domains. The conformational analysis of a large population of fibrinogen molecules on mica revealed the two most energetically favorable conformations characterized by bending angles of ～100 and 160 degrees. Computer modeling of the experimental images of fibrinogen molecules showed that the AFM patterns are in good agreement with the molecular dimensions and shapes detected by other methods. Imaging in different environments supports the expected hydration of the fibrinogen molecules in buffer, whereas imaging in humid air suggests the 2D spreading of fibrinogen on mica induced by an adsorbed water layer. Visualization of intact hydrated fibrin fibers showed cross-striations with an axial period of 24.0 ± 1.6 nm, in agreement with a pattern detected earlier with electron microscopy and small-angle X-ray diffraction. However, this order is clearly detected on the surface of thin fibers and becomes less discernible with the fiber's growth. This structural change is consistent with the proposal that thinner fibers are denser than thicker ones, that is, that the molecule packing decreases with the increasing of the fibers' diameter.     

Visualization and mechanical manipulations of individual fibrin fibers suggest that fiber cross section has fractal dimension 1.3

We report protocols and techniques to image and mechanically manipulate individual fibrin fibers, which are key structural components of blood clots. Using atomic force microscopy-based lateral force manipulations we determined the rupture force, FR, f fibrin fibers as a function of their diameter, D, in ambient conditions. As expected, the rupture force increases with increasing diameter; however, somewhat unexpectedly, it increases as FR approximately D1.30+/-0.06. Moreover, using a combined atomic force microscopy-fluorescence microscopy instrument, we determined the light intensity, I, of single fibers, that were formed with fluorescently labeled fibrinogen, as a function of their diameter, D. Similar to the force data, we found that the light intensity, and thus the number of molecules per cross section, increases as I approximately D1.25+/-0.11. Based on these findings we propose that fibrin fibers are fractals for which the number of molecules per cross section increases as about D1.3. This implies that the molecule density varies as rhoD approximately D -0.7, i.e., thinner fibers are denser than thicker fibers. Such a model would be consistent with the observation that fibrin fibers consist of 70-80% water and only 20-30% protein, which also suggests that fibrin fibers are very porous.     

Identification and characterization of a novel interaction between pulmonary surfactant protein D and decorin

Surfactant-associated protein D (SP-D) is a collectin that is present in lung surfactant and mucosal surfaces. Although SP-D regulates diverse functions, only a few proteins are known to bind to this collectin. Here we describe the co-purification of decorin, a novel SP-D-binding protein, from amniotic fluid. The human decorin that co-purified with SP-D is a 130-150-kDa proteoglycan, which has a 46-kDa protein core and approximately 90-kDa dermatan sulfate chain. Both native and recombinant decorin can bind to SP-D that is already bound to maltose-agarose matrix, and these SP-D-decorin complexes are dissociated at high salt (0.5-1.0 m NaCl) conditions, releasing the decorin. We further show that SP-D and decorin interact with each other (kd = 4 nm) by two mechanisms. First, the direct binding and competition experiments show that the carbohydrate recognition domain (CRD) of SP-D binds in a calcium dependent-manner to the sulfated N-acetyl galactosamine moiety of the glycosaminoglycan chain. Second, complement component C1q, a complement protein that is known to interact with decorin core protein via its collagen-like region, partially blocks the interaction between decorin and native SP-D. This protein, however, does not block the interaction between decorin and SP-D(n/CRD), a recombinant fragment that lacks the N-terminal and collagen-like regions. Furthermore, the core protein, obtained by chondroitin ABC lyase treatment of decorin, binds SP-D, but not SP-D(n/CRD). These findings suggest that decorin core protein binds the collagen-like region of the SP-D. Concentrations of decorin and SP-D are negatively correlated to each other, in amniotic fluid, implying a functional relevance for SP-D-decorin interaction, in vivo. Collectively, our results show that carbohydrate recognition domains of SP-D interact with the dermatan sulfate moiety of decorin via lectin activity and that the core protein of decorin binds the collagen-like region of SP-D in vitro, and these interactions may be operative in vivo.     

The Concave Face of Decorin Mediates Reversible Dimerization and Collagen Binding

Decorin, the prototypical small leucine-rich proteoglycan, binds to collagen and thereby regulates collagen assembly into fibrils. The crystal structure of the decorin core protein revealed a tight dimer formed by the association of two monomers via their concave faces (Scott, P. G., McEwan, P. A., Dodd, C. M., Bergmann, E. M., Bishop, P. N., and Bella, J. (2004) Proc. Natl. Acad. Sci. U.S.A. 101, 15633–15638). Whether decorin binds collagen as a dimer has been controversial. Using analytical ultracentrifugation, we determined a dissociation constant of 1.37 ± 0.30 μm for the mouse decorin dimer. Dimerization could be abolished by engineering glycosylation sites into the dimer interface; other interface mutants remained dimeric. The monomeric mutants were as stable as wild-type decorin in thermal unfolding experiments. Mutations on the concave face of decorin abolished collagen binding regardless of whether the mutant proteins retained the ability to dimerize or not. We conclude that the concave face of decorin mediates collagen binding and that the dimer therefore must dissociate to bind collagen.     

Substitution of the human αC region with the analogous chicken domain generates a fibrinogen with severely impaired lateral aggregation: fibrin monomers assemble into protofibrils but protofibrils do not assemble into fibers

Fibrin polymerization occurs in two steps: the assembly of fibrin monomers into protofibrils and the lateral aggregation of protofibrils into fibers. Here we describe a novel fibrinogen that apparently impairs only lateral aggregation. This variant is a hybrid, where the human αC region has been replaced with the homologous chicken region. Several experiments indicate this hybrid human-chicken (HC) fibrinogen has an overall structure similar to normal. Thrombin-catalyzed fibrinopeptide release from HC fibrinogen was normal. Plasmin digests of HC fibrinogen produced fragments that were similar to normal D and E; further, as with normal fibrinogen, the knob 'A' peptide, GPRP, reversed the plasmin cleavage associated with addition of EDTA. Dynamic light scattering and turbidity studies with HC fibrinogen showed polymerization was not normal. Whereas early small increases in hydrodynamic radius and absorbance paralleled the increases seen during the assembly of normal protofibrils, HC fibrinogen showed no dramatic increase in scattering as observed with normal lateral aggregation. To determine whether HC and normal fibrinogen could form a copolymer, we examined mixtures of these. Polymerization of normal fibrinogen was markedly changed by HC fibrinogen, as expected for mixed polymers. When the mixture contained 0.45 μM normal and 0.15 μM HC fibrinogen, the initiation of lateral aggregation was delayed and the final fiber size was reduced relative to normal fibrinogen at 0.45 μM. Considered altogether, our data suggest that HC fibrin monomers can assemble into protofibrils or protofibril-like structures, but these either cannot assemble into fibers or assemble into very thin fibers.     

Clotting of fibrinogen. 2. Calorimetry of the reversal of the effect of calcium on clotting with thrombin and with ancrod

When clotting is effected by thrombin in the presence of calcium, the endotherm for the D nodules of fibrinogen broadens significantly and then becomes narrow again, while increasing in size. Clotting effected by the snake venom enzyme Ancrod, which releases only the A fibrinopeptides from the E nodule, shows only the broadening of the D endotherm. Accordingly, significant interactions of the D nodules of fibrinogen become possible only when the B fibrinopeptides of the E nodule are released on clotting. When calcium present during clotting is removed from the fibrin clot with ethylenediaminetetraacetic acid, the endotherm for the D nodules of fibrin shows nearly complete reversal if clotting was effected with Ancrod but appears to be divided into two endotherms if clotting was effected with thrombin. At neutral pH, new endotherms were observed for fibrinogen in the temperature range 105-140 degrees C.     

Fibrin protofibril and fibrinogen binding to ADP-stimulated platelets: evidence for a common mechanism

The molecular basis of platelet-fibrin binding has been elucidated by studying interactions between platelets and protofibrils, soluble two-stranded polymers of fibrin which are intermediates on the fibrin assembly pathway. The fibrinogen degradation product, fragment D, has been used to block fibrin assembly, thus enabling the preparation of stable solutions of short protofibrils, composed of fewer than twenty fibrin monomer molecules per polymer. Fibrin protofibrils bound to ADP-activated platelets in a time- and concentration-dependent process which was effectively blocked by excess unlabelled fibrinogen, i.e., the binding was specific and appeared to involve a common receptor. ADP-stimulated cells bound approx. 3 micrograms of fibrin protofibrils/10(8) platelets, compared to 4 micrograms of fibrinogen/10(8) cells, following a 30-min incubation period at room temperature. Binding of both ligands was inhibited by high concentrations of fragment D, further indicating a similar mechanism. The kinetic data obtained were well described by an apparent first-order mechanism in which the rate constant for fibrin protofibril binding was found to be 5-fold slower than that measured for fibrinogen. Two monoclonal antibodies, each directed against the platelet glycoprotein IIb-IIIa complex, inhibited the binding of fibrin protofibrils and fibrinogen in a similar, concentration-dependent manner, providing strong evidence for a common receptor. Binding of GPRP-fibrin (soluble fibrin oligomers formed in the presence of 1 mM Gly-Pro-Arg-Pro) to ADP-stimulated platelets was also inhibited by a monoclonal antibody directed against the GPIIb-IIIa complex. Neither fibrin protofibrils nor fibrinogen bound to Glanzmann's thrombasthenic platelets, which lack normal quantities of functional glycoprotein IIb-IIIa complex, further supporting the hypothesis that fibrinogen and fibrin bind to a common platelet receptor present on the glycoprotein IIb-IIIa complex.     

Initiation of galactosaminoglycan biosynthesis. Separate galactosylation and dephosphorylation pathways for phosphoxylosylated decorin protein and exogenous xyloside.

By using various radiolabelled precursors, glycosylation and phosphorylation of decorin in a rat fibroblast cell line was investigated in the presence of increasing concentrations of p-nitrophenyl-O-beta-d-xylopyranoside. Decorin core protein glycanation was suppressed to approximately 25% of the normal level in the presence of 2 mm and 3 mm xyloside. Glycans/saccharides were released from the core protein and size-separated by gel chromatography. The intracellular decorin obtained from cells treated with 2 mm xyloside was substituted with Xyl and also with Gal-Xyl and Gal-Gal-Xyl, but not with longer saccharides. Only the trisaccharide contained an almost fully phosphorylated Xyl. We conclude that galactosylation of endogenous, xylosylated decorin and exogenous xyloside probably follow separate pathways or that xylosides and early decorin glycoforms are kept separated. At the addition of the first glucuronic acid the two pathways seem to merge and dephosphorylation of decorin takes place. Xyloside-primed and secreted galactosaminoglycan chains produced simultanously retained phosphorylated Xyl. Inadequate dephosphorylation could be due to excess substrate or to a short transit.time. As shown previously [Moses, J., Oldberg, A., Eklund, E. & Fransson, L.-A. (1997) Eur. J. Biochem. 248, 767-774], brefeldin A-arrested decorin is substituted with the linkage-region extended with an undersulphated and incomplete galactosaminoglycan chain. In cells treated with this drug, xylosides were unable to prime galactosaminoglycan synthesis and unable to inhibit glycosylation and phosporylation of decorin.