Whole genome amplification from plant cell colonies of somatic hybrids using strand displacement amplification

The application of strand displacement amplification (SDA) is demonstrated for whole genome amplification from nanograms to micrograms for DNA isolated from small plant cell colonies. Secondary digest amplified fragment length polymorphism (SD-AFLP) analysis confirmed that the amplified genome is a representative of the entire genome. This approach allows the amplification of DNA isolated from small cell colonies of putative somatic hybrids for rapid molecular confirmation of the hybrid status of fusion products.     

链替代扩增反应研究进展

链替代扩增反应作为一种体外恒温酶控扩增体系,主要基于限制酶打开缺口和无外切酶活性的DNA聚合酶的聚合替代的原理,随着该反应体系各环节的不断改进,目前该方法已应用于细菌尤其是分枝杆菌DNA的检测、体外进化模型的建立、核酸定量及芯片杂交等多个方面。     

Real-time monitoring of the strand displacement amplification (SDA) of human cytomegalovirus by a new SDA-piezoelectric DNA sensor system

Nucleic acid amplification has long been used in biosensor technologies, such as DNA sensors, DNA chips and microarrays, due to its advantage of high sensitivity in detecting target DNA. However, dynamic monitoring of nucleic acid amplifications with traditional DNA sensors in real-time is difficult since a constant temperature must be maintained during detection. Thus, the piezoelectric sensor, one type of traditional DNA sensor, is not applicable in real-time monitoring PCR due to the dramatic change in temperature that occurs during reaction. In this study, we introduced strand displacement amplification (SDA), an well-developed nucleic acid amplification technique that can work under conditions of constant temperature, into the development of a novel piezoelectric sensor. Using the new SDA-piezoelectric DNA sensor, we designed a stable system for liquid-phase detection, in which the crystal oscillator plate was fixed by an easily adjustable screw-threaded clamping mechanism and successfully applied the new sensor system to real-time SDA monitoring of human cytomegalovirus (HCMV). This new technique overcomes the shortcomings of traditional DNA sensors in real-time monitoring of nucleic acid amplification. The technique has proved to be a markedly simplified procedure with a number of advantages, such as higher sensitivity, better time efficiency, and the ability of dynamic real-time detection.     

Rapid and sensitive detection of Mycobacterium tuberculosis based on strand displacement amplification and magnetic beads

Tuberculosis is one of the main infectious diseases threatening public health, and the development of simple, rapid, and cost‐saving methods for tuberculosis diagnosis is of profound importance for tuberculosis prevention and treatment. The bacterium Mycobacterium tuberculosis (MTB) is the pathogen that causes tuberculosis, and assaying for MTB is the only criterion for tuberculosis diagnosis. A new enzyme‐free method based on strand displacement amplification and magnetic beads was developed for simple, rapid, and cost‐saving MTB detection. Under optimum conditions, a good linear relationship could be observed between fluorescence and MTB specific DNA concentration ranging from 0.05 to 150 nM with a correlation coefficient of 0.993 (n = 8) and a detection limit of 47 pM (3σ/K). The present method also distinguished a one base mismatch from MTB specific DNA, showing great promise for MTB genome single base polymorphism analysis. MTB specific DNA content in polymerase chain reaction samples was successfully detected using the new method, and recoveries were 97.8–100.8%, indicating that the present method had high accuracy and shows good potential for the early diagnosis of tuberculosis.     

A target-triggered strand displacement reaction cycle: The design and application in adenosine triphosphate sensing

A strand displacement reaction (SDR) system that runs solely on oligonucleotides has been developed for the amplification detection of adenosine triphosphate (ATP). It involves a target-induced SDR and an entropy-driven catalytic cycle of two SDRs with five oligonucleotides, denoted as substrate, fuel, catalyst, C-1, and C-2. Catalyst, released from the ATP aptamer–catalyst duplex by ATP molecule, catalyzes the SDRs to finally form the substrate–fuel duplex. All of the intermediates in the catalytic SDR processes have been identified by polyacrylamide gel electrophoresis (PAGE) analysis. The introduction of ATP into the SDR system will induce the ATP aptamer to form G-quadruplex conformation so as to release catalyst and trigger the SDR cycle. When the substrate and C-2 oligonucleotides were labeled with a carboxyfluorescein (FAM) fluorophore and a 4-([4-(dimethylamino)phenyl]azo)benzoic acid (DABCYL) quencher, this SDR catalytic system exhibited a “turn-on” response for ATP. The condition for detecting ATP, such as Mg²⁺ concentration, has been optimized to afford a detection limit of 20 nM. This work provides an enzyme-free biosensing strategy and has potential application in aptamer-based biosensing.     

Application of Phi29 DNA polymerase mediated whole genome amplification on single spores of arbuscular mycorrhizal (AM) fungi

Genetic analysis of arbuscular mycorrhizal (AM) fungi relies on analysis of single spores. The low DNA content makes it difficult to perform large scale molecular analysis. We present the application of Phi29 DNA polymerase mediated strand displacement amplification (SDA) to genomic DNA extracted from single spores of Glomus and Gigaspora species to address this problem. The genome coverage of the SDA process was evaluated by PCR amplification of the beta-tubulin1 gene and part of the rDNA cluster present in AM fungi. The fidelity of SDA was evaluated further by sequencing the Glomus intraradices ITS1 variants to detect the four ITS1 variants previously identified for this fungus.     

Whole genome amplification of the obligate intracellular pathogen Coxiella burnetii using multiple displacement amplification

This study demonstrates that whole genome multiple displacement amplification (MDA) is a promising technique for downstream genomic analysis of fastidious obligate intracellular pathogens such as Coxiella burnetii. The MDA technology can help in obtaining sufficient genetic material from highly infectious agent and thus minimizing repeated culturing and associated biohazard.     

Multiple displacement amplification prior to single nucleotide polymorphism genotyping in epidemiologic studies

We assessed the whole genome amplification strategy, known as multiple displacement amplification (MDA), for use with the TaqMan genotyping platform for DNA samples derived from two case-control studies nested in the Nurses' Health Study and the Physicians' Health Study. Our objectives were to (1) quantify DNA yield from samples of varying starting concentrations and (2) assess whether MDA products give an accurate representation of the original genomic sequence. Multiple displacement amplification yielded a mean 23000-fold increase in DNA quantity and genotyping results demonstrate 99.95% accuracy across six SNPs from four genes for 352 samples included in this study. These results suggest that MDA will provide a sufficiently robust amplification of limiting samples of genomic DNA that can be used for SNP genotyping in large case-control studies of complex diseases.     

In-gel multiple displacement amplification of long DNA fragments diluted to the single molecule level

The isolation and multiple genotyping of long individual DNA fragments are needed to obtain haplotype information for diploid organisms. Limiting dilution of sample DNA followed by multiple displacement amplification is a useful technique but is restricted to short (<5 kb) DNA fragments. In the current study, a novel modification was applied to overcome these problems. A limited amount of cellular DNA was carefully released from intact cells into a mildly heated alkaline agarose solution and mixed thoroughly. The solution was then gently aliquoted and allowed to solidify while maintaining the integrity of the diluted DNA. Exogenously provided Phi29 DNA polymerase was used to perform consistent genomic amplification with random hexameric oligonucleotides within the agarose gels. Simple heat melting of the gel allowed recovery of the amplified materials in a solution of the polymerase chain reaction (PCR)-ready form. The haplotypes of seven SNPs spanning 240 kb of the DNA surrounding the human ATM gene region on chromosome 11 were determined for 10 individuals, demonstrating the feasibility of this new method.     

Exploring whole genome amplification as a DNA recovery tool for molecular genetic studies.

The whole genome amplification (WGA) protocol evaluated during this study, GenomiPhi DNA amplification kit, is a novel method that is not based on polymerase chain reaction but rather relies on the highly processive and high fidelity Phi29 DNA polymerase to replicate linear genomic DNA by multiple strand displacement amplification. As little as 1 ng of genomic DNA template is sufficient to produce microgram quantities of high molecular weight DNA. The question explored during this study is whether such a WGA method is appropriate to reliably replenish and even recover depleted DNA samples that can be used for downstream genetic analysis. A series of human DNA samples was tested in our laboratory and validated using such analytical methods as gene-specific polymerase chain reaction, direct sequencing, microsatellite marker analysis, and single nucleotide polymorphism allelic discrimination using TaqMan and Pyrosequencing chemistries. Although degraded genomic DNA is not a good template for Phi29 WGA, this method is a powerful tool to replenish depleted DNA stocks and to increase the amount of sample for which biological tissue availability is scarce. The testing performed during the validation phase of the study indicates no discernable difference between WGA samples and the original DNA templates. Thus, GenomiPhi WGA can be used to increase precious or depleted DNA stocks, thereby extending the life of a family-based linkage analysis project and increasing statistical power.     

Specific single-cell isolation and genomic amplification of uncultured microorganisms

We in this study describe a new method for genomic studies of individual uncultured prokaryotic organisms, which was used for the isolation and partial genome sequencing of a soil archaeon. The diversity of Archaea in a soil sample was mapped by generating a clone library using group-specific primers in combination with a terminal restriction fragment length polymorphism profile. Intact cells were extracted from the environmental sample, and fluorescent in situ hybridization probing with Cy3-labeled probes designed from the clone library was subsequently used to detect the organisms of interest. Single cells with a bright fluorescent signal were isolated using a micromanipulator and the genome of the single isolated cells served as a template for multiple displacement amplification (MDA) using the Phi29 DNA polymerase. The generated MDA product was afterwards used for 16S rRNA gene sequence analysis and shotgun-cloned for additional genomic analysis. Sequence analysis showed >99% 16S rRNA gene homology to soil crenarchaeotal clone SCA1170 and shotgun fragments had the closest match to a crenarchaeotal BAC clone previously retrieved from a soil sample. The system was validated using Methanothermobacter thermoautotrophicus as single-cell test organism, and the validation setup produced 100% sequence homology to the ten tested regions of the genome of this organism.     

Multiple displacement amplification of isolated DNA from human gallstones: molecular identification of Helicobacter DNA by means of 16S rDNA-based pyrosequencing analysis

BACKGROUND: Molecular typing of Helicobacter spp. in clinical biopsy specimens has become increasingly important. By means of nested polymerase chain reaction (PCR) amplification and Southern blot analysis of the PCR amplicons, we have shown that Helicobacter spp. DNA is present in human gallstones. In this study we have investigated the possibility of using multiple displacement amplification (MDA) of isolated gallstone DNA and pyrosequencing analysis for the molecular identification of Helicobacter spp. MATERIALS AND METHODS: DNA isolated from the nucleus of 33 human gallstones and one control strain were used in a MDA assay. Subsequently, pyrosequencing analysis was performed either directly on MDA-DNA using primers flanking the Helicobacter spp. 16S rDNA variable V3 region or on PCR amplicons derived from broad-range primers flanking the 16S rDNA variable V3, V4, and V9 regions. RESULTS: Pyrosequencing analysis of 16S rDNA derived from MDA-DNA revealed that Helicobacter spp.-like DNA was present in 25 of 33 (approximately 76%) gallstones. Using an H. pylori-specific Southern blot analysis, Helicobacter spp.-like DNA was present in 20 of 33 [approximately 61%] of the gallstones. Using MDA-DNA directly in pyrosequencing analysis, Helicobacter spp.-like DNA was present in 13 of 33 [approximately 39%] gallstones. CONCLUSIONS: We conclude that multiple displacement amplification combined with pyrosequencing enables a rapid and accurate molecular typing of Helicobacter spp. from small and precious biopsy specimens.     

Methylation profiling using degenerated oligonucleotide primer-PCR specific for genome-wide amplification of bisulfite-modified DNA

DNA methylation is one of the essential epigenetic processes that play a role in regulating gene expression. Aberrant methylation of CpG-rich promoter regions has been associated with many forms of human cancers. The current method for determining the methylation status relies mainly on bisulfite treatment of genomic DNA, followed by methylation-specific PCR (MSP). The difficulty in acquiring a methylation profiling often is limited by the amount of genomic DNA that can be recovered from a given sample, whereas complex procedures of bisulfite treatment further compromise the effective template for PCR analysis. To circumvent these obstacles, we developed degenerated oligonucleotide primer (DOP)-PCR to enable amplification of bisulfite-modified genomic DNA at a genome-wide scale. A DOP pair was specially designed as follows: first 3' DOP, CTCGAGCTGHHHHHAACTAC, where H is a mixture of base consisting of 50% A, 25% T, and 25% C; and second 5' DOP, CTCGAGCTGDDDDDGTTTAG, where D is a mixture of base consisting of 50% T, 25% G, and 25% A. Our results showed that bisulfite-modified DNAs from a cell line, cord blood cells, or cells obtained by laser capture microdissection were amplified by up to 1000-fold using this method. Subsequent MSP analysis using these amplified DNAs on nine randomly selected cancer-related genes revealed that the methylation status of these genes remained identical to that derived from the original unamplified template.     

A simple colorimetric DNA detection by target-induced hybridization chain reaction for isothermal signal amplification

A novel DNA detection method is presented based on a gold nanoparticle (AuNP) colorimetric assay and hybridization chain reaction (HCR). In this method, target DNA hybridized with probe DNA modified on AuNP, and triggered HCR. The resulting HCR products with a large number of negative charges significantly enhanced the stability of AuNPs, inhibiting aggregation of AuNPs at an elevated salt concentration. The approach was highly sensitive and selective. Using this enzyme-free and isothermal signal amplification method, we were able to detect target DNA at concentrations as low as 0.5 nM with the naked eye. Our method also has great potential for detecting other analytes, such as metal ions, proteins, and small molecules, if the target analytes could make HCR products attach to AuNPs.     

Whole genome amplification of buccal cytobrush DNA collected for molecular epidemiology studies

Abstract

When cytobrush buccal cell samples have been collected as a genomic DNA (gDNA) source for an epidemiological study, whole genome amplification (WGA) can be critical to maintain sufficient DNA for genotyping. We evaluated REPLI-g? WGA using gDNA from two paired cytobrushes (cytobush ‘A’ kept in a cell lysis buffer, and ‘B’ dried and kept at room temperature for 3 days, and frozen until DNA extraction) in a pilot study (n=21), and from 144 samples collected by mail in a breast cancer study. WGA success was assessed as the per cent completion/concordance of STR/SNP genotypes. Locus amplification bias was assessed using quantitative PCR of 23 human loci. The pilot study showed > 98% completion but low genotype concordance between cytobrush wgaDNA and paired blood gDNA (82% and 84% for cytobrushes A and B, respectively). Substantial amplification bias was observed with significantly lower human gDNA amplification from cytobrush B than A. Using cytobrush gDNA samples from the breast cancer study (n =20), an independent laboratory demonstrated that increasing template gDNA to the REPLI-g reaction improved genotype performance for 49 SNPs; however, average completion and concordance remained below 90%. To reduce genotype misclassification when cytobrush wgaDNA is used, inclusion of paired gDNA/wgaDNA and/or duplicate wgaDNA samples is critical to monitor data quality.     

Multiple displacement amplification as a pre-polymerase chain reaction (pre-PCR) to detect ultra low population of Ralstonia solanacearum (Smith 1896) Yabuchi et al. (1996)

Aims:  To develop a reliable and sensitive protocol for detection of Ralstonia solanacearum using MDA-PCR (Multiple displacement amplification–PCR amplification).
Methods and Results:  MDA-PCR technique was performed on pure cell lysates as well as soil samples. Pure cell lysate as well as that of soil DNA was used as template in MDA reaction. MDA of template DNA was carried out in the presence of sample buffer, reaction buffer and enzyme mix (Φ 29 DNA polymerase and random hexamers). The MDA amplified DNA was used for PCR amplification using R. solanacearum -specific PCR primers. MDA-PCR could detect as low as 1 colony forming unit (CFU ml⁻¹) of bacteria within 8 h including DNA isolation.
Conclusion:  MDA followed by standard PCR facilitated the detection of pathogen from very low count samples. The method is of great importance in managing the brown rot disease of potato.
Significance and Impact of study:  The ultrasensitive detection technique developed in the present study is sensitive and speedy enough to be included into integrated wilt disease control programmes.     

Visual DSD: a design and analysis tool for DNA strand displacement systems

SUMMARY: The Visual DSD (DNA Strand Displacement) tool allows rapid prototyping and analysis of computational devices implemented using DNA strand displacement, in a convenient web-based graphical interface. It is an implementation of the DSD programming language and compiler described by Lakin et al. (2011) with additional features such as support for polymers of unbounded length. It also supports stochastic and deterministic simulation, construction of continuous-time Markov chains and various export formats which allow models to be analysed using third-party tools.     

Genome coverage and sequence fidelity of phi29 polymerase-based multiple strand displacement whole genome amplification

Major efforts are underway to systematically define the somatic and germline genetic variations causally associated with disease. Genome-wide genetic analysis of actual clinical samples is, however, limited by the paucity of genomic DNA available. Here we have tested the fidelity and genome representation of phi29 polymerase-based genome amplification (phi29MDA) using direct sequencing and high density oligonucleotide arrays probing >10,000 SNP alleles. Genome representation was comprehensive and estimated to be 99.82% complete, although six regions encompassing a maximum of 5.62 Mb failed to amplify. There was no degradation in the accuracy of SNP genotyping and, in direct sequencing experiments sampling 500,000 bp, the estimated error rate (9.5 x 10(-6)) was the same as in paired unamplified samples. The detection of cancer-associated loss of heterozygosity and copy number changes, including homozygous deletion and gene amplification, were similarly robust. These results suggest that phi29MDA yields high fidelity, near-complete genome representation suitable for high resolution genetic analysis.     

An efficient method for variable region assembly in the construction of scFv phage display libraries using independent strand amplification

Phage display library technology is a common method to produce human antibodies. In this technique, the immunoglobulin variable regions are displayed in a bacteriophage in a way that each filamentous virus displays the product of a single antibody gene on its surface. From the collection of different phages, it is possible to isolate the virus that recognizes specific targets. The most common form in which to display antibody variable regions in the phage is the single chain variable fragment format (scFv), which requires assembly of the heavy and light immunoglobulin variable regions in a single gene.

In this work, we describe a simple and efficient method for the assembly of immunoglobulin heavy and light chain variable regions in a scFv format. This procedure involves a two-step reaction: (1) DNA amplification to produce the single strand form of the heavy or light chain gene required for the fusion; and (2) mixture of both single strand products followed by an assembly reaction to construct a complete scFv gene. Using this method, we produced 6-fold more scFv encoding DNA than the commonly used splicing by overlap extension PCR (SOE-PCR) approach. The scFv gene produced by this method also proved to be efficient in generating a diverse scFv phage display library. From this scFv library, we obtained phages that bound several non-related antigens, including recombinant proteins and rotavirus particles.