Purification and characterization of human caseinomacropeptide produced by a recombinant Saccharomyces cerevisiae

Caseinomacropeptide (CMP) is a biologically active polypeptide derived from the C-terminal of milk kappa-casein. CMP is heterogeneous since it is modified differently by glycosylation and phosphorylation after translation. Recently, recombinant human CMP (hCMP) has been produced as a secretory product in yeast. The present study aimed at the purification and characterization of recombinant hCMP. By sequential molecular cut-off ultrafiltration and anion-exchange chromatography, the recombinant hCMP in the culture broth could be purified to an HPLC purity over 94%. The authenticity of the purified hCMP was confirmed by sequence analysis of N-terminal amino acids. The recombinant hCMP was estimated to be 7.0kDa by SDS-PAGE, and showed a lower glycosylation than the natural bovine CMP.     

Electroinduced release of invertase from Saccharomyces cerevisiae

Invertase liberation from Saccharomyces cerevisiae was detected after application of series of rectangular millisecond electric pulses. Maximal yield (60% from the activity in crude extract) was achieved within 8 h after pulsation. As shown by staining SDS-PAGE for invertase activity, the main part of liberated enzyme is a high molecular weight periplasmic invertase.     

Enhancement of plasmid stability and protein productivity using multi-pulse, fed-batch culture of recombinant Saccharomyces cerevisiae

The plasmid stability of a recombinant Saccharomyces cerevisiae strain, which expresses cloned -amylase, was increased when glucose or yeast extract was fed with multi-pulse mode in fed-batch culture. Using a novel strategy combining constant rate fed-batch culture and multi-pulse feeding of yeast extract, the plasmid stability was maintained over 90%, meanwhile, 36 g cells l^–1 and 208 units of cloned -amylase activity ml^–1 were obtained.     

Immobilization and characterization of Saccharomyces cerevisiae in crosslinked,prepolymerized polyacrylamide-hydrazide

Summary Baker's yeast (Saccharomyces cerevisiae) was immobilized in gels made of prepolymerized, linear, water soluble polyacrylamide, partially substituted with acylhydrazide groups. Gelation was effected by the addition of controlled amounts of dialdehydes (e.g. glyoxal). The immobilized yeasts retained full glycolytic activity. Moreover, the entrapped cells were able to grow inside the chemically corsslinked gel during continuous alcohol production. Glyoxal was found to be the most favourable crosslinking agent for this system. the system employed allowed for the free exchange of substrate and products. The gel surrounding the entrapped cells had no effect on temperature stability profile. On the other hand, substantial enhancement in survival of cells in presence of high ethanol concentrations was recorded for the entrapped yeast. The capability of the immobilized yeast to carry out continuous conversion of glucose to ethanol was demonstrated.     

Quantification of Saccharomyces cerevisiae viability using BacLight

Yeast viability can be accurately quantified using BacLight, a kit which so far has been used only for bacterial analysis. Upon staining, viable cells can be differentiated from non-viable ones by either confocal laser scanning microscopy (CLSM), epifluorescence microscopy, or flow cytometry. Using Saccharomyces cerevisiae as a model, viabilities quantified by CLSM deviated an average of 1.7% from the actual data, and those determined by flow-cytometry by 1.4%.     

Influence of killer strains of Saccharomyces cerevisiae on wine fermentation

The effect of killer strains of Saccharomyces cerevisiae on the growth of sensitive strains during must fermentation was studied by using a new method to monitor yeast populations. The capability of killer yeast strains to eliminate sensitive strains depends on the initial proportion of killer yeasts, the susceptibility of sensitive strains, and the treatment of the must. In sterile filtered must, an initial proportion of 2-6% of killer yeasts was responsible for protracted fermentation and suppression of isogenic sensitive strains. A more variable initial proportion was needed to get the same effect with non-isogenic strains. The suspended solids that remain in the must after cold-settling decreased killer toxin effect. The addition of bentonite to the must avoided protracted fermentation and the suppression of sensitive strains; however, the addition of yeast dietary nutrients with yeast cell walls did not, although it decreased fermentation lag.     

Improvement on laboratory fermentation equipment to study Saccharomyces cerevisiae metabolism

Beside being an ordinary fermenter, the present equipment was conceived to sample the medium, to store the samples and to record photographs of the yeasts. Ten sensors were used to measure gas exchanges. During the growth of ScM1 (a Saccharomyces cerevisiae strain) on glucose, we could observe two different linear decreases of CO₂ production rates (18.17±0.12 mmol CO₂ h^–2 (g biomass)^–1 and 8.67±0.12 mmol CO₂ h^–2 (g biomass)^–1), together with a sudden variation of slope during the respiro-fermentative phase. Nomenclature F_in InletairFlowl h ^–1 F_out OutletgasFlowl h ^–1 _in Inletairtemperature°C_out Outletgastemperature°CP _atm AtmosphericPressuremmHgP _in InletairOverPressuremmHgP _out OutletgasOverPressuremmHgDODissolvedO ₂ mg l^–1 pO₂ PartialPressureO ₂ in Outlet gas % (v/v) pCO₂ PartialPressureCO ₂ in Outlet gas % (v/v) Int(t) Whole number of hours     

Metabolic diversity of Saccharomyces cerevisiae strains from spontaneously fermented grape musts

One hundred and fifteen Saccharomyces cerevisiae strains from Aglianico del Vulture, a red wine produced in Southern Italy, were characterized for the production of some secondary compounds involved in the aroma and taste of alcoholic beverages. The strains exhibited a uniform behaviour in the production levels of n-propanol, active amyl alcohol and ethyl acetate, whereas isobutanol, isoamyl alcohol and acetaldehyde were formed with a wide variability. Only five strains produced wines close to the reference Aglianico del Vulture wine for the traits considered. Of these, two strains were selected, underwent to tetrad analysis and the single spore cultures were tested in grape must fermentation. The progeny of one strain showed a significant metabolic variability, confirming the necessity to test starter cultures for the segregation of traits of technological interest. Our findings suggest the selection of specific strains for specific fermentations as a function of the vine variety characteristics in order to take the major advantage from the combination grape must/S. cerevisiae strain.     

Biosynthesis of invertase by Saccharomyces cerevisiae with sugarcane molasses as substrate

Biosynthesis of invertase by Saccharomyces cerevisiae 01K32 was inversely proportional to the concentration of sugarcane blackstrap molasses included in the medium. In a fermenter, an intracellular invertase activity of 440 U/g dry cells was obtained.     

Properties of a sucrose-tolerant Mutant of Saccharomyces cerevisiae

We characterized a sucrose-tolerant mutant of Saccharomyces cerevisiae, S22, that produces about four times as much acetate as the wild-type strain K9. We monitored the concentration of extracellular acetate during cultivation, and compared the gene expression ratios of S22 with those of K9 using DNA microarray. We propose that the sucrose tolerance of S22 may be related to the overexpression of the ENA1, ENA2, and ENA5 genes and some cell wall mannoprotein genes, and that the high acetate productivity of S22 is related to the overexpression of the ALD4 gene and oxidative phosphorylation genes.     

Plasmid stability in recombinant Saccharomyces cerevisiae

Because of many advantages, the yeast Saccharomyces cerevisiae is increasingly being employed for expression of recombinant proteins. Usually, hybrid plasmids (shuttle vectors) are employed as carriers to introduce the foreign DNA into the yeast host. Unfortunately, the transformed host often suffers from some kind of instability, tending to lose or alter the foreign plasmid. Construction of stable plasmids, and maintenance of stable expression during extended culture, are some of the major challenges facing commercial production of recombinant proteins. This review examines the factors that affect plasmid stability at the gene, cell, and engineering levels. Strategies for overcoming plasmid loss, and the models for predicting plasmid instability, are discussed. The focus is on S. cerevisiae, but where relevant, examples from the better studied Escherichia coli system are discussed. Compared to free suspension culture, immobilization of cells is particularly effective in improving plasmid retention, hence, immobilized systems are examined in some detail. Immobilized cell systems combine high cell concentrations with enhanced productivity of the recombinant product, thereby offering a potentially attractive production method, particularly when nonselective media are used. Understanding of the stabilizing mechanisms is a prerequisite to any substantial commercial exploitation and improvement of immobilized cell systems.     

Scale-up of recombinant hirudin production fromSaccharomyces cerevisiae

Scale-up of hirudin production fromSaccharomyces cerevisiae from bench-scale to pilot-scale was carried out based on constant volumetric oxygen transfer coefficient (K _L a). Fed-batch mode of cultivation using step-wise feeding strategy of galactose was employed for the production of hirudin in a 30-L and a 300-L pilot-scale fermentor. The final hirudin concentrations were achieved 390 mg/L and 286.1 mg/L, and the volumetric productivities were 80.4% and 90.7% with the 30-L and 300-L fermentors, respectively, compared to the productivity of the 5-L bench-scale fermentor.     

Kinetic modelling reveals current limitations in the production of ethanol from xylose by recombinant Saccharomyces cerevisiae

Saccharomyces cerevisiae lacks the ability to ferment the pentose sugar xylose that is the second most abundant sugar in nature. Therefore two different xylose catabolic pathways have been heterologously expressed in S. cerevisiae. Whereas the xylose reductase (XR)-xylitol dehydrogenase (XDH) pathway leads to the production of the by-product xylitol, the xylose isomerase (XI) pathway results in significantly lower xylose consumption. In this study, kinetic models including the reactions ranging from xylose transport into the cell to the phosphorylation of xylulose to xylulose 5-P were constructed. They were used as prediction tools for the identification of putative targets for the improvement of xylose utilization in S. cerevisiae strains engineered for higher level of the non-oxidative pentose phosphate pathway (PPP) enzymes, higher xylulokinase and inactivated GRE3 gene encoding an endogenous NADPH-dependent aldose reductase. For both pathways, the in silico analyses identified a need for even higher xylulokinase (XK) activity. In a XR-XDH strain expressing an integrated copy of the Escherichia coli XK encoding gene xylB about a six-fold reduction of xylitol formation was confirmed under anaerobic conditions. Similarly overexpression of the xylB gene in a XI strain increased the aerobic growth rate on xylose by 21%. In contrast to the in silico predictions, the aerobic growth also increased 24% when the xylose transporter gene GXF1 from Candida intermedia was overexpressed together with xylB in the XI strain. Under anaerobic conditions, the XI strains overexpressing xylB gene and the combination of xylB and GFX1 genes consumed 27% and 37% more xylose than the control strain.     

Profiling of external metabolites during production of hantavirus nucleocapsid protein with recombinant Saccharomyces cerevisiae

Recombinant strains of Saccharomyces cerevisiae, producing hantavirus Puumala nucleocapsid protein for diagnostics and as a candidate vaccine were analyzed for uptake and excretion of intermediary metabolites during process optimization studies of fed-batch bioreactor cultures. Concentrations of glucose, maltose, galactose, pyruvate, acetaldehyde, ethanol, acetate, succinate and formaldehyde (used as a selection agent) were measured in the culture medium in order to find a metabolite pattern, indicative for the physiological state of the producer culture. When the inducer galactose was employed as a growth substrate, the metabolite profile of recombinant yeast cells was different from those of the non-recombinant original strain which excreted considerable amounts of metabolites with this substrate. In contrast, galactose-induced heterologous gene expression was indicated by the absence of excreted intermediary metabolites, except succinate. A model strain expressing a GFP fusion of hantavirus nucleocapsid protein differed in the excretion of metabolites from strains without GFP. In addition, the influence of alkali ions, employed for pH control is also demonstrated.     

Physiological aspects of growth and recombinant DNA stability inSaccharomyces cerevisiae

Despite the fact that plasmid stability in the yeastSaccharomyces cerevisiae is influenced by both genetical and physiological parameters most attention has been focussed on the former. Physiological factors affecting the stability of plasmids have been poorly characterized despite the need for such information in order to optimize the use ofS. cerevisiae as a host for recombinant protein production processes. The physiology of wild typeS. cerevisiae differs considerably when grown using different cultivation techniques. A limited amount of phenomenological data has been reported concerning plasmid instability effects under these different conditions and in this article these have been collected together with the intention of providing an overview to instability effects and to try and propose reasons as to how the physiological response to different growth conditions can be manifested as stability/instability effects.     

Inactivation by glucose of phosphoenolpyruvate carboxykinase from Saccharomyces cerevisiae

Phosphoenolpyruvate carboxykinase showed high activity in Saccharomyces cerevisiae grown on gluconeogenic carbon sources. Addition of glucose to such cultures caused a rapid loss of the phosphoenolpyruvate carboxykinase activity. Fructose or mannose had the same effect as glucose, while 2-deoxyglucose or galactose were without effect. The inactivation was an irreversible process, since the regain of the activity was dependent of de novo protein synthesis. Cycloheximide did not prevent inactivation. All strains of the genus Saccharomyces tested showed inactivation of their phosphoenolpyruvate carboxykinase upon addition of glucose; this behaviour was not restricted to this genus.Non-Standard Abbreviations FbPase fructose bisphosphatase [EC 3.1.3.11 fructose-1,6-bisphosphate hydrolase] - PEPCK phosphoenolpyruvate carboxykinase [EC 4.1.49 ATP: oxalacetate carboxylase (transphosphorylating)] - YPE yeast-peptone-ethanol A preliminary account of these results was presented at the Fourth International Symposium on Yeasts, Vienna, Austria, July 1974     

Enhancement of plasmid stability and enzymatic expression by immobilising recombinant Saccharomyces cerevisiae

Immobilisation of cells in a calcium alginate gel improved plasmid stability (up to 50%) and enzymatic expression (up to 57%) of a recombinant Saccharomyces cerevisiaeover-expressing the homologous gene EXG1. The rate of segregational loss in the free cells was 14-fold higher than that of the immobilised cells. Recombinant protein synthesis requires reduced cofactors, which affect the redox balance of the cell.     

Effect of some heavy metal ions on copper-induced metallothionein synthesis in the yeast Saccharomyces cerevisiae

Copper-induced metallothionein (MT) synthesis in Saccharomyces cerevisiae was investigated in order to associate this exclusively with Cu²⁺ in vivo, when cultured in nutrient medium containing other heavy metal ions. Expression of the CUP1 promoter/lacZ fusion gene was inhibited by all heavy metal ions tested, especially Cd²⁺ and Mn²⁺. By adding Cd²⁺ and Mn²⁺ at 10 M concentration, the -galactosidase activity decreased by about 80% and 50% of the maximum induction observed with 1 mM CuSO₄, respectively. Furthermore, cell growth was markedly inhibited by combinations of 1 mM-Cu²⁺ and 1 M-Cd²⁺. Therefore, the yeast S. cerevisiae could not rely on MT synthesis as one of the copper-resistance mechanisms, when grown in a Cd²⁺ environment. In contrast, the presence of Mn²⁺ in the nutrient medium showed alleviation rather than growth inhibition by high concentrations of Cu²⁺. The recovery from growth inhibition by Mn²⁺ was due to decreased Cu²⁺ accumulation. Inhibitory concentrations of Co²⁺, Ni²⁺ and Zn²⁺ on expression of the CUP1p/lacZ fusion gene were at least one order of magnitude higher than that of Cd²⁺ and Mn²⁺. These results are discussed in relation to Cu²⁺ transport and Cu-induced MT synthesis in the copper-resistance mechanism of the yeast S. cerevisiae.     

Rapid purification of recombinant human lipocortin-I secreted fromSaccharomyces cerevisiae

Human lipocortin-I was expressed as a secretory product bySaccharomyces cerevisiae harboring an expression system consisting ofGAL10 promoter, inulinase signal sequence and lipocortin-I terminator. Fed-batch fermentation was carried out to overproduce recombinant human lipocortin-I. The culture medium was desalted and concentrated by ultrafiltration, and then subjected to hydroxyapatite column chromatography. The lipocortin-I was purified to >98% purity by single-step hydroxyapatite column chromatography. However, it was found that the purified lipocortin-I was a proteolytically-cleaved form which was cleaved immediately after the basic amino acid Lys²⁶.