Research on the Long Time Swelling Properties of Poly (vinyl alcohol)/Hydroxylapatite Composite Hydrogel

Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.Thewater loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests ofPVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling propertieswith the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long timeimmersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HAcomposite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel inthe calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and itsequilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the networkstructure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content.Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium areobtained when the HA content is 3% and the number of freezing-thawing cycles is 7.     

Effect of Preparation Methods on Mechanical Properties of PVA/HA Composite Hydrogel

##正## Poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) composite hydrogel specimens were prepared with 15% PVA and 1%,2%, 3%, 4% and 5% HA by repeated freezing-thawing. The tests of static and dynamic mechanical properties were carried out todiscuss the influence of different contents of HA and freezing-thawing cycles on the mechanical properties of PVA/HA compositehydrogel. The results of static mechanical tests showed that the PVA/HA composite hydrogel with 3% HA and ninefreezing-thawing cycles had excellent stress relaxation properties, higher relaxation ratio, lower stress equilibrium value andpresented better properties of creep and recovery. The results of dynamic mechanical test showed that the PVA/HA compositehydrogel with nine freezing-thawing cycles had higher storage modulus and loss modulus, so was the PVA/HA compositehydrogel with 3% HA.     

聚乙烯醇的生物降解

聚乙烯醇(PVA)是较少的可溶于水并被生物降解的乙烯聚合物之一。研究表明,在受PVA污染的自然环境中存在着能降解PVA的微生物,并从中提取出了PVA降解酶。介绍了国内外研究聚乙烯醇生物降解的情况。分别讨论了聚乙烯醇被单一菌种、共生细菌和真菌降解过程中的生物化学和生理学特性,以及结构因素对聚乙烯醇生物降解的影响。这些研究促进了可有效生物降解的PVA类材料产品项目的发展。     

Biodesulfurization using Pseudomonas delafieldii in magnetic polyvinyl alcohol beads

AIMS: To immobilize Pseudomonas delafieldii R-8 cells in magnetic polyvinyl alcohol (PVA) beads for biodesulfurization. METHODS AND RESULTS: Magnetic PVA beads were prepared by a freezing-thawing technique under liquid nitrogen. The beads have distinct super-paramagnetic properties and their saturation magnetization is 8.02 emu g(-1). The desulfurization rate of the immobilized cells could reach 40.2 mmol kg(-1) h(-1). Desulfurization patterns of dibenzothiophene in model oil with the immobilized and free cells were represented by the Michaelis-Menten equation. The Michaelis constant for both immobilized and free cells was 1.3 mmol l(-1). CONCLUSIONS: The cells immobilized in magnetic PVA beads could be stably stored and be repeatedly used over 12 times for biodesulfurization. The immobilized cells could be easily separated by magnetic field. SIGNIFICANCE AND IMPACT OF THE STUDY: Magnetic PVA beads are easy to prepare. The immobilization process in the paper is to increase the efficiency of cells and to decrease the cost of operations.     

Resin straw as an alternative system to securely store frozen microorganisms

Freezing of prokaryotic and eukaryotic microorganisms is the main interest in the study of cold stress responses of living organisms. In parallel, applications which arise from this approach are of two types: (i) optimization of the frozen starters used in food processing; and (ii) improvement of the ex situ preservation of microorganisms in collections. Currently, cryopreservation of microorganisms in collections is carried out in cryotubes, and bibliographical references related to freezing microorganisms packaged in straws are scarce. In this context, a preliminary study was completed to evaluate the technological potential of ionomeric resin straws compared to polycarbonate cryo-tubes. Survival under freezing stress was tested on three microorganisms selected for their biotechnological interest: two lactic acid bacteria, Lactococcus lactis subsp. cremoris and Lactobacillus delbrueckii subsp. bulgaricus and a deuteromycete fungus, Geotrichum candidum. The stress was carried out by repeated freezing-thawing cycles to artificially accelerate the lethal effect of freezing on the microorganisms. Two main results were obtained: (i) the survival rate values (per freezing-thawing cycle) seems to depend on the thermal type of the studied microorganism, and (ii) there was no, under our experimental conditions, significant difference between straws and tubes. However, conservation in the resin straws lead to a slight increase in the survival of L. cremoris and G. candidum compared to microtubes. In those conditions, straws seems an alternative system to securely store frozen microorganisms with three main characteristics: (i) a high resistance to thermal stress, (ii) a safe closing by hermetic weld, and (iii) a system for inviolable identification.     

A modified method for isolating poly(vinyl alcohol)-degrading bacteria and study of their degradation patterns

An addition of catalase or peroxidase into an agar plate containing poly(vinyl alcohol) (PVA), was effective for the isolation of PVA-degrading microorganisms. A Gram-negative bacterium, strain TK-2 (-group of proteobacteria), rapidly degraded a high molecular weight PVA to low molecular weight material after 1 day thereby producing oligomers of PVA as shown by gel permeation chromatography. Conversely, Sphingomonas strain TJ-7 did not produce any PVA oligomers, suggesting that the strain TJ-7 degraded PVA from the terminal ends of the molecules, whereas the strain TK-2 cleaved PVA at random.     

Preparation of crosslinked macroporous PVA foam carrier for immobilization of microorganisms

In this work, a new and economical way to prepare macroporous poly(vinyl alcohol) (PVA) foam was explored by adding calcium carbonate as a pore-forming agent and using epichlorhydrin as a chemical crosslinking agent to improve foam stability. The mixture for foam formation has been optimized to obtain macroporous PVA foam carriers with uniform apertures, narrow distribution of pore sizes, and good elasticity. The crosslinked PVA foam (CPVAF) carrier demonstrated better chemical and thermal stability, as well as larger specific surface area and diffusion coefficients than the traditional PVA (TPVA) carrier. Nitrifying bacteria were used to test the suitability of CPVAF and TPVA carriers for immobilized microorganisms. CPVAF carriers supported higher biomass density and microbial activity than TPVA carriers. At the same biomass density, the higher nitrification rate of CPVAF carriers was attributed to excellent mass transfer of the substrate (and oxygen) between the bulk solution and the immobilized microorganisms.     

Plasmid transformation of frozen and thawed bacteria]

Plasmid DNA transformation efficiency depends on three essential factors: 1) the optimal regime of the recipients freezing-thawing; 2) the period of the recipients competence preservation; 3) individual sensitivity of microorganisms to freezing-thawing. It is demonstrated that plasmid DNA pMB9 activity indices are of maximal value during freezing at -70 degrees C or -196 degrees C and thawing at 42 degrees C. The short period of the competence, about 15 seconds, determines the rate of its infection. In this case it was achieved by mutual freezing-thawing of bacteria and DNA pMB9. The optimal yield of transformants is obtained in the following conditions: the concentration of bacteria - 1 - 5.10(9) cells/ml, the concentration of DNA pMB9 - 0.05--0.5 mcg/ml in the reaction mixture containing 0.5--1% of bactopeptone ("Spofa") and at pH 7.4--7.6.     

Ammonia removal from livestock wastewater by ammonia-assimilating microorganisms immobilized in polyvinyl alcohol

We isolated ammonia-assimilating microorganisms from the livestock manure treatment systems and evaluated their ammonia-assimilating ability. Many isolates utilized ammonia at high rates when they were purely cultivated in a nitrogen-limited medium to which sterilized lagoon extract had been added. Some isolates that were immobilized in polyvinyl alcohol (PVA) utilized ammonia present in the media containing viable lagoon microorganisms. Staining with 4′,6′-diamidino-2-phenylindole (DAPI) indicated that the immobilized high ammonia-assimilating isolates grew dominantly within the PVA beads. High ammonia-assimilating isolates in the mixed culture containing viable lagoon microorganisms were identified as Pseudomonas spp. and member of Rhizobiaceae species by partial sequencing of the 16S ribosomal DNA.     

聚乙烯醇生物降解研究进展

聚乙烯醇(PVA)是一种在纺织和化工行业中广泛使用的难降解的高分子聚合物。随着人们对纺织工业清洁生产的关注,如何在退浆工艺中就实现对PVA的生物降解、减少PVA废水的排放,并避免化学退浆过程中高温和氧化造成的棉纤维损伤,是近年来纺织生物技术领域的研究热点。由于PVA降解菌种类不多、培养周期长,PVA降解酶酶活不高、提取不容易等原因,使PVA的生化降解研究还局限在PVA降解菌的筛选、PVA降解酶的酶学性质研究等方面,PVA降解酶还未在纺织工业上得到应用。本文综述了近年来国内外在PVA降解菌筛选、PVA降解酶提取及酶学性质、PVA生化降解机理等方面的研究进展,并讨论了PVA生化降解研究中存在的问题及发展方向。     

On the Convergence of an Algorithm of Jones

Pearce (1976) proposed the use of the variance matrix for design block experiments. Jones (1976) gave an iterative formula for, but stated that the iteration failed to converge for some block designs. We derive necessary and sufficient conditions for the convergence of JONES' iteration. We also note that a simple modification to JONES' iteration will ensure its convergence.     

混合拟单调系统行波解的存在性

运用单调迭代方法,证明了混合拟单调系统的行波解的存在性．当反应扩散系。统的反应函数是混合拟单调函数时,如果选取一对合适的耦合上下解作为迭代初值,则迭代序列将收敛到一对拟解．而且在这对拟解之间存在系统的行波解．     

Iterative manual control model of human operator

In this paper, we present an iterative manual control model of a human operator performing some repetitive task. Various aspects of the model are discussed in detail. Experiments have been done to study the human capability to perform the tasks by learning iteratively. Results of the experiments show the ability of the human operator to perform the tracking of a desired trajectory for some unknown non-linear system with quite reasonable accuracy during the iteration process. It is concluded that the human operator performs the repetitive task by modifying his control action using error and error rate in each iteration. During the modification, the human operator assigns different weights to the error and error rate in each iteration. These results can be implemented in designing more efficient iterative learning control algorithms. Received: 29 September 1998 / Accepted in revised form: 12 May 1999     

Resolution of natural groups using iterative assignment tests: an example from two species of Australian native rats (Rattus)

Sympatric individuals of Rattus fuscipes and Rattus leucopus, two Australian native rats from the tropical wet forests of north Queensland, are difficult to distinguish morphologically and are often confused in the field. When we started a study on fine-scale movements of these species, using microsatellite markers, we found that the species as identified in the field did not form coherent genetic groups. In this study, we examined the potential of an iterative process of genetic assignment to separate specimens from distinct (e.g. species, populations) natural groups. Five loci with extensive overlap in allele distributions between species were used for the iterative process. Samples were randomly distributed into two starting groups of equal size and then subjected to the test. At each iteration, misassigned samples switched groups, and the output groups from a given round of assignment formed the input groups for the next round. All samples were assigned correctly on the 10th iteration, in which two genetic groups were clearly separated. Mitochondrial DNA sequences were obtained from samples from each genetic group identified by assignment, together with those of museum voucher specimens, to assess which species corresponded to which genetic group. The iterative procedure was also used to resolve groups within species, adequately separating the genetically identified R. leucopus from our two sampling sites. These results show that the iterative assignment process can correctly differentiate samples into their appropriate natural groups when diagnostic genetic markers are not available, which allowed us to resolve accurately the two R. leucopus and R. fuscipes species. Our approach provides an analytical tool that may be applicable to a broad variety of situations where genetic groups need to be resolved.     

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.     

Simultaneous nitrification and denitrification using an autotrophic membrane-immobilized biofilm reactor

AIMS: To develop a laboratory-scale autotrophic membrane-immobilized biofilm reactor to remove nitrogen from drinking water. METHODS AND RESULTS: A polyvinyl alcohol (PVA) immobilized biofilm, attached to the surface of a silicone tube, was used as the basis of a bioreactor for simultaneous nitrification and denitrification of water. The bioreactor was aerated with air to supply oxygen for nitrification. Pure hydrogen was supplied to the silicone tube and diffused through the membrane wall to feed the biofilm for autotrophic denitrification. The bioreactor was effective for the simultaneous nitrification and denitrification of water after a short period of acclimation, while the biofilm exhibited good resistance to the inhibition of denitrification by dissolved oxygen; the denitrification rate decreased by only 8% as the dissolved oxygen increased from 2 mg l(-1) to saturation. CONCLUSIONS: By using PVA crosslinked with sodium nitrate to entrap nitrifying and denitrifying sludge on the surface of a silicone tube, a novel bioreactor for simultaneous nitrification and denitrification was developed. In addition to performing as an immobilizing agent to strengthen the biofilm, PVA protected the denitrifying microorganisms to reduce the inhibition by dissolved oxygen under aerobic condition. Therefore, nitrification and denitrification occurred simultaneously within the biofilm. Furthermore, the immobilization technique shortened the acclimation period of the bioreactor. SIGNIFICANCE AND IMPACT OF THE STUDY: The described space saving and simple to operate bioreactor for nitrogen removal performed autotrophic denitrification to solve the problem of residual carbon in heterotrophic denitrification, and thus is suitable for removing nitrogen from drinking water.     

CTAB, Triton X-100 and freezing-thawing treatments of Candida guilliermondii: effects on permeability and accessibility of the glucose-6-phosphate dehydrogenase, xylose reductase and xylitol dehydrogenase enzymes

Cells of Candida guilliermondii (ATCC 201935) were permeabilised with surfactant treatment (CTAB or Triton X-100) or a freezing-thawing procedure. Treatments were monitored by in situ activities of the key enzymes involved in xylose metabolism, that is, glucose-6-phosphate dehydrogenase (G6PD), xylose reductase (XR) and xylitol dehydrogenase (XD). The permeabilising ability of the surfactants was dependent on its concentration and incubation time. The optimum operation conditions for the permeabilisation of C. guilliermondii with surfactants were 0.41 mM (CTAB) or 2.78 mM (Triton X-100), 30°C, and pH 7 at 200 rpm for 50 min. The maximum permeabilisation measured in terms of the in situ G6PD activity observed was, in order, as follows: CTAB (122.4±15.7U/g(cells)) > freezing-thawing (54.3 ± 1.9U/g(cells))>Triton X-100 (23.5 ± 0.0U/g(cells)). These results suggest that CTAB surfactant is more effective in the permeabilisation of C. guilliermondii cells in comparison to the freezing-thawing and Triton X-100 treatments. Nevertheless, freezing-thawing was the only treatment that allowed measurable in situ XR activity. Therefore, freezing-thawing permeabilised yeast cells could be used as a source of xylose reductase for analytical purposes or for use in biotransformation process such as xylitol preparation from xylose. The level of in situ xylose reductase was found to be 13.2 ± 0.1 U/g(cells).     

Iterative Approximation of Basic Belief Assignment Based on Distance of Evidence

In the theory of belief functions, the approximation of a basic belief assignment (BBA) is for reducing the high computational cost especially when large number of focal elements are available. In traditional BBA approximation approaches, a focal element’s own characteristics such as the mass assignment and the cardinality, are usually used separately or jointly as criteria for the removal of focal elements. Besides the computational cost, the distance between the original BBA and the approximated one is also concerned, which represents the loss of information in BBA approximation. In this paper, an iterative approximation approach is proposed based on maximizing the closeness, i.e., minimizing the distance between the approximated BBA in current iteration and the BBA obtained in the previous iteration, where one focal element is removed in each iteration. The iteration stops when the desired number of focal elements is reached. The performance evaluation approaches for BBA approximations are also discussed and used to compare and evaluate traditional BBA approximations and the newly proposed one in this paper, which include traditional time-based way, closeness-based way and new proposed ones. Experimental results and related analyses are provided to show the rationality and efficiency of our proposed new BBA approximation.     

典型黑土耕作区土壤结构对季节性冻融的响应

以东北典型黑土耕作区土壤为研究对象,通过对一季冻融交替后土壤团聚体、土壤楔入阻力、容重、孔隙度、饱和度、广义土壤结构指数等指标的测定和分析,对比研究了季节性冻融对黑土耕作土壤结构特征的影响.结果表明:季节性冻融加剧了黑土耕作区土壤风干团聚体的分散,但显著降低了水稳性团聚体的破坏率(P0.05),表现出促进其团聚的作用;季节性冻融后黑土土壤楔入阻力降低了15.45%;容重趋于一致,在1.10～1.11g.cm-3之间;固相比例持续增加,总孔隙度与毛管孔隙度均不同程度降低;土壤饱和度总体增加了13.06%,削弱了土壤潜在贮水能力.季节性冻融改善了耕作区的土壤结构,使之更适于耕作.虽然季节性冻融增强了土壤团聚体的抗蚀性,却削弱了土壤的抗冲性,增加了黑土水蚀发生的风险.     

微生物混合发酵的研究及应用

由于不同微生物之间的正相互作用,人们发现应用两种或两种以上微生物混合发酵能更好地解决实践中的许多问题。在过去几年中,对微生物的混合发酵的应用以及其中微生物之间的相互作用机理的研究取得了明显进展,主要有以下4个方面:(1)对生物质的降解利用;(2)对环境污染物的降解;(3)生产特定的代谢产物;(4)混合发酵的工艺。综述了微生物混合发酵的应用及相关机理、涉及的微生物和影响因素。