ADSORPTION AND UPTAKE OF COPPER BY THE GREEN ALGA SCENEDESMUS SUBSPICATUS (CHLOROPHYTA)1

Copper (II) accumulation has been investigated in the green alga Scenedesmus subspicatus G. Brinkmann considering both adsorption and uptake kinetics. Experiments were conducted in a Cu- and PH-buffered medium at different free Cu²⁺ concentrations that were neither growth limiting nor toxic. We distinguished between adsorption on the cell surface and intracellular uptake by extracting copper from the cells with EDTA. Data from short-term experiments were compared with data obtained from experiments under steady state conditions. The accumulation of Cu can be described by two processes, an initial fast adsorption occurring within a minute followed by a slower intracellular uptake. Metal uptake followed Michaelis-Menten kinetics and is mediated by two systems, one with low and the other with high affinity. The maximum uptake rates (1.30 × 10^?-¹⁰ mol·[g dry wt algae]^?1· min^?1, 3.67 × 10^?-⁹ mol·[g dry wt algae]^?1·min^?1), and the half-saturation constants (6.84 × 10^?-¹⁴ M, 2.82 × 10^?-¹² M) for the two uptake systems were determined using the Lineweaver-Burk plot. The calculated maximum concentration of binding sites on the surface of the algae is initially higher (9.0 × 10^?-⁶ mol Cu.[g dry wt algae]^?1) than under steady state conditions (2.9 × 10^?-⁶ mol Cu·[g dry wt algae]^?1). This suggests that the initial binding to the algal surface comprises the binding to specific transport ligands as well as to inert adsorption sites. The conditional stability constant of the Cu binding to surface ligands was calculated as log K_Cu= 11.0 at pH 7.9. This freshwater alga has a high ability to accumulate Cu, reflecting its adaptation to the bioavailable concentration of copper.     

Culture medium optimization for camptothecin production in cell suspension cultures of Nothapodytes nimmoniana (J. Grah.) Mabberley

The effect of culture medium nutrients on growth and alkaloid production by plant cell cultures of Nothapodytes nimmoniana (J. Grah.) Mabberley (Icacinaceae) was studied with a view to increasing the production of the alkaloid camptothecin, a key therapeutic drug used for its anticancer properties. Amongst the various sugars tested with Murashige and Skoog (MS) medium, such as glucose, fructose, maltose, and sucrose, maximum accumulation of camptothecin was observed with sucrose. High nitrate in the media supports the biomass, while high ammonium enhances the camptothecin content. Selective feeding of 60 mM total nitrogen with a NH₄ ⁺/NO₃ ^? balance of 5/1 on day 15 of the culture cycle results in a 2.4-fold enhancement in the camptothecin content over the control culture (28.5 μg/g DW). Furthermore, the sucrose feeding strategy greatly stimulated cell biomass and camptothecin production. A modified MS medium was developed in the present study, which contained 0.5 mM phosphate, a nitrogen source feeding ratio of 50/10 mM NH₄ ⁺/NO₃ ^? and 3 % sucrose with additional 2 % sucrose feeding (added on day 12 of the cell culture cycle) with 10.74 μM naphthaleneacetic acid and 0.93 μM kinetin. Finally, the selective medium has 1.7- and 2.3-fold higher intracellular and extracellular camptothecin content over the control culture (29.2 and 8.2 μg/g DW), respectively.     

Oxidative stress induces alkaloid production in Uncaria tomentosa root and cell cultures in bioreactors

The effect of oxidative stress on indole alkaloids accumulation by cell suspensions and root cultures of Uncaria tomentosa in bioreactors was investigated. Hydrogen peroxide (H₂O₂, 200 μM) added to U. tomentosa cell suspension cultures in shaken flasks induced the production of monoterpenoid oxindole alkaloids (MOA) up to 40.0 μg/L. In a stirred tank bioreactor, MOA were enhanced by exogenous H₂O₂ (200 μM) from no detection up to 59.3 μg/L. Root cultures grew linearly in shaken flasks with a μ=0.045 days^?1 and maximum biomass of 12.08±1.24 g DW/L (at day 30). Roots accumulated 3α‐dihydrocadambine (DHC) 2354.3±244.8 μg/g DW (at day 40) and MOA 348.2±32.1 μg/g DW (at day 18). Exogenous addition of H₂O₂ had a differential effect on DHC and MOA production in shaken flasks. At 200 μM H₂O₂, MOA were enhanced by 56% and DHC by 30%; while addition of 800 and 1000 μM H₂O₂, reduced by 30–40% DHC accumulation without change in MOA. Root cultures in the airlift reactor produced extracellular H₂O₂ with a characteristic biphasic profile after changing aeration. Maximum MOA was 9.06 mg/L at day 60 while at this time roots reached ca. 1 mg/L of DHC. Intracellular H₂O₂ in root cultures growing in the bioreactor was 0.87 μmol/g DW compared to 0.26 μmol/g DW of shaken flasks cultures. These results were in agreement with a higher activity of the antioxidant enzymes superoxide dismutase and peroxidase by 6‐ and 2‐times, respectively. U. tomentosa roots growing in the airlift bioreactor were exposed to an oxidative stress and their antioxidant system was active allowing them to produce oxindole alkaloids.     

Survival of alginate-entrapped cells of Azospirillum lipoferum during dehydration and storage in relation to water properties

Survival of alginate-entrapped cells of Azospirillum lipoferum was studied during dehydration using a dry air stream and during prolonged storage at various constant water activity values (a_w). During the drying operation, the viability loss remained almost constant from the initial water content to 0.35 g water/g dry weight (DW) corresponding to a 98.5% water removal, strongly increased until a water content of 0.25 g/g DW and then stopped until the end of the drying operational (final a_w 0.18). A water content of 0.25 g/g DW (a_w=0.55) corresponded to the critical point of the moisture sorption isotherm curve from which water became restricted to the dry material. A high drying rate (5 g/g DW per hour) was shown to be more detrimental for cell viability than a low drying rate (1.18 g/g DW per hour). When the product was stored in a closed chamber with a regulated a_w (0.23), the number of living cells decreased during a short period (less than 15 days) corresponding to the product a_w stabilization, and then remained constant for more than 150 days. In addition, cell survival during storage was not affected by a_w values in the range 0–0.55. Above a_w=0.55, the higher the a_w and the storage duration, the lower the residual survival percentage. The influence of the drying and storage conditions on the cell death rate are discussed with regard to both the mechanisms generally involved in viability loss and the hydration properties of water. Correspondence to: A. Pareilleux     

Manipulation of ginsenoside heterogeneity of <Emphasis Type="Italic">Panax notoginseng</Emphasis> cells in flask and bioreactor cultivations with addition of phenobarbital

Structure-similar ginsenosides have different or even totally opposite biological activities, and manipulation of ginsenoside heterogeneity is interesting and significant to biotechnological application. In this work, addition of 1 mM phenobarbital to cell cultures of Panax notoginseng at a relatively high inoculation size of 7.6 g dry cell weight (DW)/L enhanced the production of protopanaxatriol-type (Rg₁ + Re) ginsenosides in both shake flask and airlift bioreactor (ALR, 1 L working volume). The content of Rg₁ + Re in the ALR was increased from 42.5 ± 4.0 mg per gram DW in untreated cell cultures (control) to 56.4 ± 4.6 mg per gram DW with addition of 1.0 mM phenobarbital. The maximum productivity of Rg₁ + Re in the ALR reached 5.66 ± 0.38 mg L⁻¹ d⁻¹, which was almost 3.3-fold that of control. The maximum ratio of the detectable ginsenosides protopanaxatriol:protopanaxadiol (Rb₁) was 7.6, which was about twofold that of control. The response of protopanaxadiol 6-hydroxylase (P6H) activity to phenobarbital addition coincided with the above-mentioned change of ginsenoside heterogeneity (distribution). Phenobarbital addition is considered as a useful strategy for manipulating the ginsenoside heterogeneity in bioreactor with enhanced biosynthesis of protopanaxatriol by P. notoginseng cells.     

EDTA-enhanced lead phytoremediation in sunflower (Helianthus annuus L.) hydroponic culture

The aim of the present study was to investigate the capability of Sunflower (Helianthus annuus L.) to tolerate and accumulate high amount of lead (Pb) and propose it for soil phytoremediation. To this regard, plants were grown in hydroponics and treated with different Pb concentrations (10 to 160 ??M) and a fixed concentration (500 ??M) EDTA (ethylene diamine tetra acetic acid) for 14 and 28 days (d). Effects on total biomass production, photosynthetic pigments and protein contents as well as the quantities of non protein thiols (NP-SH), glutathione (GSH), phytochelatins (PCs) and activity of glutathione reductase (GR) were estimated. Results revealed that roots (575 ??g g^?1 DW) and shoots (135 ??g g^?1 DW) accumulated Pb after 28 d of exposure, however, addition of EDTA enhanced the Pb accumulation in roots (645 ??g g^?1 DW) and shoots (255 ??g g^?1 DW ). Exposure of Pb (28 d) registered a significant (P?<?0.05) reduction in growth parameters and induction of phytochelatins (P?<?0.05; r?=?0.26) plus some of the important antioxidants (P?<?0.05; r?=?0.42), which were positively correlated to metal accumulation. Sunflower exposed at 40 ??M of Pb for 28 d synthesized higher quantity of PC₂ (18.5 fold) and PC₃ (10.5 fold), as compared to control. However, the results showed that addition of EDTA resulted in low toxicity compared to Pb alone. These data support the capability of H. annuus L. to accumulate and tolerate significant quantity of Pb and its utility for phytoremediation. This is because of the plant has the capacity to combat metal induced oxidative stress via significant synthesis of NP-SH, GSH and high activity of GR, as it would provide sufficient GSH not only for PCs synthesis but also for antioxidant function.     

Differential Regulation of Transferrin Receptor Gene Expression in Human Hemopoietic Cells: Molecular and Cellular Aspects

Abstract

As we have shown earlier (-)¹²⁵lodocyanopindolol (¹²⁵ICYP) binding to β-adrenoceptors (β-AR) in human mononuclear leucocytes (MNL) yields evidence for the existence of high affinity (B_hiaff) and low affinity (B_loaff) binding sites. We studied the regulation of these 2 classes of binding sites during 240 min of (-)-epinephrine (EPI) infusion (0.1 μg/kg/min) (n=8) in male healthy volunteers. Saturation experiments were performed on MNL membranes with ¹²⁵ICYP over a large concentration range (1–550 pmol/l). Binding parameters were calculated by computer analysis assuming 2 classes of binding sites. We found a preinfusion value of 830±50 [sites/cell] (K_D=1.5±0.2 pmol/l) of B_hiaff binding sites and 5210±510 [sites/cell] (K_D=420±80 pmol/l) of B_loaff. During EPI infusion we observed biphasic modulation of the B_hiaff and an inverse modulation of the B_loaff. After 40 min of EPI B_hiaff increased to 1970±280 [sites/cell] (K_D=4.2±0.8 pmol/l), whereas B_loaff decreased to 2720±280 [sites/cell] (K_D=140±70 pmol/l); despite constant plasma epinephrine concentration (PEC) after 240 min of EPI B_hiaff changed to 1310±240 [sites/cell] (K_D=2.8±1.0 pmol/l) vs. 4370±760 [sites/cell] (K_D=190±100 pmol/l) B_loaff. These results suggest an interdependent inverse modulation of the 2 classes of binding sites for ¹²⁵ICYP on MNL during EPI infusion.     

Production of high-density Chlorella culture grown in fermenters

The freshwater microalga Chlorella vulgaris was grown heterotrophically in fed-batch 50–600-L fermenters at 36°C, on aerated and mixed nutrient solution with urea as a nitrogen and glucose as a carbon and energy source. Cell density increased from the initial value 6.25 to 117.18 g DW L⁻¹ in 32 h in the fermenter 50 L at a mean growth rate 3.52 g DW L⁻¹ h⁻¹. The DW increase in the fermenter 200 L was from 7.25 to 94.82 g DW L⁻¹ in 26.5 h at a mean growth rate 3.37 g DW L⁻¹ h⁻¹. Mean specific growth rate μ was about 0.1 h⁻¹ in the both fermenters, if nutrients and oxygen were adequately supplied. The DW increase in the fermenter 600 L was from 0.8 to 81.6 g DW L⁻¹ in 66.5 h at a mean growth rate 1.22 g DW L⁻¹ h⁻¹ and μ = 0.07 h⁻¹. A limitation of the cell growth rate in 600 L fermenter caused by a low dissolved oxygen concentration above cell densities higher than 10 g DW L⁻¹) occurred. Specific growth rate decreased approximately linearly with increasing glucose concentration (25–80 g glucose L⁻¹) at the beginning of cultivation and decreased with the time of cultivation. The cell yield was 0.55–0.69 g DW (g glucose)⁻¹. The content of proteins, β-carotene, and chlorophylls in the cells steadily increased and starch content decreased, by keeping aerated and mixed culture another 12 h in fermenter after the cell growth was stopped due to glucose deficiency.     

Ultra‐stable phosphoglucose isomerase through immobilization of cellulose‐binding module‐tagged thermophilic enzyme on low‐cost high‐capacity cellulosic adsorbent

One‐step enzyme purification and immobilization were developed based on simple adsorption of a family 3 cellulose‐binding module (CBM)‐tagged protein on the external surface of high‐capacity regenerated amorphous cellulose (RAC). An open reading frame (ORF) Cthe0217 encoding a putative phosphoglucose isomerase (PGI, EC 5.3.1.9) from a thermophilic bacterium Clostridium thermocellum was cloned and the recombinant proteins with or without CBM were over‐expressed in Escherichia coli. The rate constant (k_cat) and Michaelis–Menten constant (K_m) of CBM‐free PGI at 60°C were 2,765 s^?1 and 2.89 mM, respectively. PGI was stable at a high protein concentration of 0.1 g/L but deactivated rapidly at low concentrations. Immobilized CBM (iCBM)‐PGI on RAC was extremely stable at ～60°C, nearly independent of its mass concentration in bulk solution, because its local concentration on the solid support was constant. iCBM‐PGI at a low concentration of 0.001 g/L had a half‐life time of 190 h, approximately 80‐fold of that of free PGI. Total turn‐over number of iCBM‐PGI was as high as 1.1 × 10⁹ mole of product per mole of enzyme at 60°C. These results suggest that a combination of low‐cost enzyme immobilization and thermoenzyme led to an ultra‐stable enzyme building block suitable for cell‐free synthetic pathway biotransformation that can implement complicated biochemical reactions in vitro. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011.     

SPC3, an anti-HIV peptide construct derived from the viral envelope,binds and enters HIV target cells

SPC₃ is a peptide construct (eight branches of the GPGRAF motif) derived from the consensus sequence present at the apex of the third variable domain of the human immunodeficiency virus (HIV) envelope (Env). It presents a potent anti-HIV activity and is currently tested in phase II clinical trials (FDA protocol 257A). Its mode of action remains unclear. It was thought that SPC₃ exerts its effect both during HIV interaction with CD4⁺ cells but also through interference either with a post-binding event or with Env processing. Accordingly, SPC₃ was supposed to be able to bind and to enter CD4⁺ cells. In this work, we addressed these points. SPC₃ was found to interact with CD4⁺ cell membrane with a K_0.5 value in the range of 500 nm . The binding of SPC₃ to CD4⁺ cells involves its interaction with a cell membrane associated protein which is pronase sensitive and different from CD4. This interaction was similar from 2 to 37°C. The maximum binding occurred at acidic pH whereas the interaction was inhibited in alkaline conditions. We observed also that SPC₃ was internalized rapidly into the cells—the maximal intracell amount was reached within 30 min—where it remained stable for at least 24 h. Altogether, these data suggest that SPC₃ can exert its antiviral activity via interference with events occurring at the cell surface but also into the target cell. © 1998 European Peptide Society and John Wiley & Sons, Ltd.     

Interaction of influenza virus proteins with planar bilayer lipid membranes II. Effects of rimantadine and amantadine

The dependence of the surface potential difference (ΔU), transversal elasticity module (E₁) and membrane conductivity (G₀) on the concentrations of the antiviral drugs, rimantadine and amantadine was studied in the planar bilayer lipid membrane system. The method used was based on independent measurements of the second and third harmonics of the membrane capacitance current. The binding constants of bilayer lipid membranes obtained from the drug adsorption isotherms were 2.1 · 10⁵ M^?1 and 1.3 · 10⁴ M^?1 for rimantadine and amantadine, respectively. The changes in G₀ took place only after drug adsorption saturation had been achieved. The influence of rimantadine and amantadine on the interaction of bilayer lipid membranes with matrix protein from influenza virus was also investigated. The presence of 70 μg/ml rimantadine in the bathing solution resulted in an increase in the concentration of M-protein at which the adsorption and conductance changes were observed. The effects of amantadine were similar to those of rimantadine but required a higher critical concentration of amantadine. The results obtained suggest that the antiviral properties of rimantadine and amantadine may be related to the interaction of these drugs with the cell membrane, which can affect virus penetration into the cell as well as maturation of the viral particle at the cell membrane.     

Primary production in papyrus (<Emphasis Type="Italic">Cyperus papyrus</Emphasis> L.) of Rubondo Island,Lake Victoria,Tanzania

Above- and below-ground production and morphological characteristics of papyrus wetlands were measured at monthly intervals from July 2005 to June 2006 at Rubondo Island, Lake Victoria, Tanzania. The average value of live culm biomass (5,789 ± 435 g DW m⁻²) was higher than that of umbel biomass (2,902 ± 327 g DW m⁻²) by 50%. Root to rhizome means biomass value ratio was 1:1.8, rhizome biomass (4,144 ± 452 g DW m⁻²) being higher than roots biomass (2,254 ± 314 g DW m⁻²) by 45%. Direct proportion was observed between shoot density and culm–unit (culms and umbels) biomass. The average value of detritus/litter biomass (1,306 ± 315 g DW m⁻²) was less than total aerial biomass by 86%. The values of biomass are average of 12 sampling months from July 2005 to June 2006.     

Effect of plant growth regulators and medium composition on cell growth and saponin production during cell-suspension culture of mountain ginseng (Panax ginseng C. A. mayer)

We have established cell-suspension cultures of mountain ginseng (Panax ginseng G A. Mayer), and have attempted to increase the yield of saponin by manipulating our processing method and culturing factors (e.g., media strengths; the presence of plant growth regulators or sucrose; ratios of NO⁺ ₃/ NH^- ₄). Maximum biomass yield was obtained in media containing 2,4-D. However, saponin productivity was much higher in a medium comprising either IBA or NAA; 7.0 mg/L IBA was optimal for promoting both cell growth (10.0 g/L dry weight) and saponin production (7.29 mg/g DW total ginsenoside). Although the addition of cytokinins (BA and kinetin) did not affect cell growth, the level of saponin (particularly in the Rb group) was enhanced when the media were supplemented with either 0.5 mg/L BA or 0.5 mg/L kinetin. Half- and full-strength MS media were equally suitable for inducing both biomass as well as saponin production. We also investigated the effect of various concentrations of sucrose and nitrogen, and found that 30 g/L sucrose enhanced biomass yield as well as saponin content However, further increases (i.e., up to 70 g/L) led to a decrease in saponin accumulation and biomass production. Maximum growth and saponin productivity were reported from treatments with an initial nitrogen concentration of 30 mM. In general, the amount of saponin increased when the test media had high NO⁺ ₃/ NH^- ₄ ratios; in fact, saponin production was greatest when nitrate was the sole nitrogen source.     

The influence of trace TiO2 on adsorption of Ag+-imprinted adsorbents made from chitosan and mycelium

The complex technology of molecular imprinting with a photocatalytic reaction introduces novel ways of treating industrial and living sewage. This paper deals with the effects of trace TiO₂ on Ag⁺-imprinted or non-imprinted adsorbents. NanoTiO₂ was added during the preparation of the adsorbents. The performance of these adsorbents was compared with other common adsorbents, such as activated carbon and chitosan. TiO₂ loading improved the adsorption ability for Ag⁺ of adsorbents. Adsorption equilibrium could be rapidly achieved at an initial Ag⁺ concentration of 200 mg/L under different light conditions (UV, visible light, and dark). After TiO₂ loading, the maximal adsorption capacity of Ag⁺-imprinted and non-imprinted adsorbents was 25.0% higher, at 155.0 and 134.3 mg/g, respectively, at the initial Ag⁺ concentration of 1,000 mg/L. In order to understand the binding state of Ag, Ti on the adsorbents surface, FTIR, XPS were measured. The FTIR analysis, before and after adding TiO₂, indicated that TiO₂ bound with adsorbents through hydrogen bonding. XPS analysis, before and after adsorption, indicated Ag⁺ was reduced to Ag⁰ on the adsorbent surface, leading to an increased adsorption of Ag⁺.     

Collagen receptors mediate early events in the attachment of epithelial (MDCK) cells

Summary Madin-Darby canine kidney (MDCK) cells kept in suspension culture for 12–15 hr displayed high-affinity binding sites for¹²⁵I-lathyritic (soluble) collagen (120,000/cell,K _D =30nm) and preferred collagens types I and IV over laminin or fibronectin as substrates during the first hour of attachment. On the other hand, after 4 hr, attachment to all four substrates was equally efficient. Upon challenge with a collagen substrate, the high-affinity sites were rapidly recruited on it (T1/2=6 min). Their occupancy by soluble collagen triggered the exocytosis of a second large population of low-affinity collagen binding sites that included laminin and seems to be involved in a second cell-attachment mechanism. These results are compatible with a twostep model of MDCK cell attachment to the substrate: first, via high-affinity collagen binding sites, and second, via laminin of cellular origin.     

Water Content during Abscisic Acid Induced Freezing Tolerance in Bromegrass Cells

Changes in water content and dry weight were determined in control cells and those induced to cold harden in response to abscisic acid (ABA) treatment (7.5 × 10⁻⁵ molar). Bromegrass (Bromus inermis Leyss cv Manchar) cells grown in suspension culture at room temperature (23°C) for 7 days acclimated to −28°C (LT₅₀) when treated with ABA, or to −5°C when untreated. ABA significantly reduced cell growth rates at 5 and 7 days after treatment. Growth reduction was due to a decrease in cell number rather than cell size. When the cell water content was expressed as percent water (percent H₂O) or as grams water per gram dry weight (gram H₂O/gram dry weight [g DW]), the water content of hardy, ABA-treated cells decreased from 85% to 77% or from 6.4 to 3.3 g H₂O/g DW in 7 days. Control cell water content remained static at approximately 87% and 7.5 g H₂O/g DW. However, cell water content, expressed as milligrams water per million cells (milligram H₂O/10⁶ cells), did not differ in ABA-treated or control cells. The dry matter content of ABA-treated cells, expressed as milligram DW/10⁶ cells increased to 3.3 milligram/10⁶ cells in 7 days, whereas the dry weight of the control cells remained between 1.4 to 2.1 milligrams/10⁶ cells. The osmotic potential of ABA-treated cells decreased by the fifth day while that of control cells increased significantly and then decreased by day 7. Elevated osmotic potentials were not associated with increased ion uptake. In contrast to much published literature, these results suggest that cell water content does not decrease in ABA-treated cells during the induction of freezing tolerance, rather the dry matter mass per cell increased. Cell water content may be more accurately expressed as a function of cell number when accompanying changes to dry cell matter occur.     

The density-dependency of dark- and low-background radiation effects on water and water solution properties

The effects of dark -(Ev = 0 lux) and low-background radiation (BGR), where R < 1μRongen/h, on physicochemical properties (specific electrical conductivity, heat fusion, hydrogen peroxide (H₂O₂), and oxygen contents) of distilled water (DW) and physiological solution (PS) at 4°C and 18°C were studied. The incubation of DW and PS samples in dark and in low BGR (under dark) medium at 4°C and 18°C brings to changes of their physicochemical properties compared with DW and PS samples incubated in light and normal BGR condition (Ev = 500–550 lux and R = 17 μRoentgen/h). The observed changes of DW and PS properties depended on their initial temperature, density and ionic composition. It is suggested that water molecules dissociation and ions hydration are sensitive to illumination and BGR. Therefore, the cell-bathing medium can be considered as a messenger through which direct and non direct (by modulating of others factors-induced effects) influences of illumination and BGR on cell metabolism are realized.     

Kinetic and Equilibrium Studies of (-)125Iodocyanopindolol Binding to β-Adrenoceptors on Human Lymphocytes: Evidence for the Existence of two Classes of Binding Sites

Abstract

Saturation experiments were performed on intact human peripheral mononuclear leucocytes (MNL) and MNL membranes with (-)¹²⁵Iodocyanopindolol (¹²⁵ICYP) over a large concentration range (1.5-600pmol/l). The corresponding Scatchard plots were curvilinear suggesting two saturable classes of binding sites: A high affinity binding site (B_max1=1000±400 sites/cell, K_d1= 2.1±0.9 pmol/l for intact MNL and B_max1=550±190 sites/cell, K_d1=4.1±0.9 pmol/l for MNL membranes)and a low affinity binding site (B_max2=9150±3590 binding sites/cell, K_d2=440±50 pmol/l for intact MNL and B_max2=11560±4690 sites/cell, K_d2=410±70 pmol/l for MNL membranes). Dissociation of (-)¹²⁵ICYP from MNL was biphasic consisting of a slow dissociating component (dissociation rate constant k_-1=(0.5±0.2)x10^?3 min^?1 for intact MNL and k_-1=(1.0±0.1)x10^?3min^?1 for MNL membranes) and a fast dissociating component (k_-2=(80±20)x10^?3min^?1 for intact MNL and k_-2=(60±10)x10^?3min^?1 for MNL membranes). In dissociation experiments started after equilibration with various (-)¹²⁵ICYP concentrations k_-1 and k_-2 were independent of the equilibrium concentration, whereas the percentual occupancy of the slow and the fast dissociating component varied and was similar to the estimated fractional occupancy of either binding site at the same (-)¹²⁵ICYP concentrations in saturation experiments. The association rate constant was in the same order of magnitude for both binding sites. These results suggest two independent classes of binding sites for (-)¹²⁵ICYP on MNL.