Flow patterns in an endovascular stent-graft for abdominal aortic aneurysm repair

Endovascular exclusion of the abdominal aortic aneurysm (AAA) has been carried out in selected patients during the past decade. The deployment of a complex multicomponent endovascular device in an aneurysmal aorta may alter the local haemodynamics and lead to thrombosis and intimal hyperplasia development. The aim of this in vitro study was to investigate the flow patterns using flow visualisation and laser Doppler anemometry in a commercial bifurcated stent-graft. Two configurations of the stent-graft, endo-stent and exo-stent, were investigated in an idealised planar AAA model. The flow structures in the main trunk in both configurations of the stent-graft are three-dimensional with complex secondary structures. However, these flow structures were not entirely caused by the stent-graft. The stent struts in the endo-stent configuration cause localised alteration in the flow pattern but the overall flow structures were not significantly affected. Low velocity regions in the main trunk and flow separation in the stump region and the curved segment of the iliac limbs were observed. These areas are associated with thrombosis in the clinical situation. Improvements in the design of endovascular devices may remove these areas of unfavourable flow patterns and lead to better clinical performance.     

Hemodynamic investigation of a patient-specific abdominal aortic aneurysm with iliac artery tortuosity

Abstract

This paper describes a systematic investigation on the hemodynamic environment in a patient-specific AAA with tortuous common iliac artery(CIA) and external iliac artery (EIA). 3D reconstructions from CT scans and subsequent computational simulation are carried out. It is found out that the Newtonian and non-Newtonian models have very similar flow field and WSS distribution. More importantly, it is revealed that the torturous CIA maintained its helical flow. It is concluded that the assumption of Newtonian blood is adequate in capturing the intra-aneurysmal hemodynamics. Moreover, it is speculated that the physiological spiral flow protects the twisted CIA from the thrombosis formation.     

Analysis of biomechanical factors affecting stent-graft migration in an abdominal aortic aneurysm model

Focusing on a representative abdominal aortic aneurysm (AAA) with a bifurcating stent-graft (SG), a fluid-structure interaction (FSI) solver with user-supplied programs has been employed to solve for blood flow, AAA/SG deformation, sac pressure and wall stresses, as well as the downward forces acting on the SG. Simulation results indicate that implanting a SG can significantly reduce sac pressure, mechanical stress, pulsatile wall motion, and maximum diameter change in AAAs; hence, it may restore normal blood flow and prevent AAA rupture effectively. The transient SG drag force is similar in trend as the cardiac pressure. Its magnitude depends on multi-factors including blood flow conditions, as well as SG and aneurysm geometries. Specifically, AAA neck angle, iliac bifurcation angle, neck aorta-to-iliac diameter ratio, SG size, and blood waveform play important roles in generating a fluid flow force potentially leading to SG migration. It was found that the drag force can exceed 5N for an AAA with a large neck or iliac angle, wide aortic neck and narrow iliac arteries, large SG size, and/or abnormal blood waveform. Thus, the fixation of self-expandable or balloon-expandable SG contact may be inadequate to withstand the forces of blood flowing through the implant and hence means of extra fixation should be considered. A comprehensive FSI analysis of the coupled SG-AAA dynamics provides physical insight for evaluating the luminal hemodynamics, and maximum AAA-stresses as well as biomechanical factors leading potentially to SG migration.     

Evaluating patient-specific abdominal aortic aneurysm wall stress based on flow-induced loading

In this paper, we develop a physiologic wall stress analysis procedure by incorporating experimentally measured, non-uniform pressure loading in a patient-based finite element simulation. First, the distribution of wall pressure is measured in a patient-based lumen cast at a series of physiologically relevant steady flow rates. Then, using published equi-biaxial stress-deformation data from aneurysmal tissue samples, a nonlinear hyperelastic constitutive equation is used to describe the mechanical behavior of the aneurysm wall. The model accounts of the characteristic exponential stiffening due to the rapid engagement of nearly inextensible collagen fibers and assumes, as a first approximation, an isotropic behavior of the arterial wall. The results show a complex wall stress distribution with a localized maximum principal stress value of 660 kPa on the inner surface of the posterior surface of the aneurysm bulge, a considerably larger value than has generally been reported in calculations of wall stress under the assumption of uniform loading. This is potentially significant since the posterior wall has been suggested as a common site of rupture, and the aneurysmal tensile strength reported by other authors is of the same order of magnitude as the maximum stress value found here.     

Measuring and modeling patient-specific distributions of material properties in abdominal aortic aneurysm wall

Both the clinically established diameter criterion and novel approaches of computational finite element (FE) analyses for rupture risk stratification of abdominal aortic aneurysms (AAA) are based on assumptions of population-averaged, uniform material properties for the AAA wall. The presence of inter-patient and intra-patient variations in material properties is known, but has so far not been addressed sufficiently. In order to enable the preoperative estimation of patient-specific AAA wall properties in the future, we investigated the relationship between non-invasively assessable clinical parameters and experimentally measured AAA wall properties. We harvested n = 163 AAA wall specimens (n = 50 patients) during open surgery and recorded the exact excision sites. Specimens were tested for their thickness, elastic properties, and failure loads using uniaxial tensile tests. In addition, 43 non-invasively assessable patient-specific or specimen-specific parameters were obtained from recordings made during surgery and patient charts. Experimental results were correlated with the non-invasively assessable parameters and simple regression models were created to mathematically describe the relationships. Wall thickness was most significantly correlated with the metabolic activity at the excision site assessed by PET/CT (ρ = 0.499, P = 4 × 10^?7) and to thrombocyte counts from laboratory blood analyses (ρ = 0.445, P = 3 × 10^?9). Wall thickness was increased in patients suffering from diabetes mellitus, while it was significantly thinner in patients suffering from chronic kidney disease (CKD). Elastic AAA wall properties had significant correlations with the metabolic activity at the excision site (PET/CT), with existent calcifications, and with the diameter of the non-dilated aorta proximal to the AAA. Failure properties (wall strength and failure tension) had correlations with the patient’s medical history and with results from laboratory blood analyses. Interestingly, AAA wall failure tension was significantly reduced for patients with CKD and elevated blood levels of potassium and urea, respectively, both of which are associated with kidney disease. This study is a first step to a future preoperative estimation of AAA wall properties. Results can be conveyed to both the diameter criterion and FE analyses to refine rupture risk prediction. The fact that AAA wall from patients suffering from CKD featured reduced failure tension implies an increased AAA rupture risk for this patient group at comparably smaller AAA diameters.     

Fluid-structure interaction in abdominal aortic aneurysms: effects of asymmetry and wall thickness

Background  

Abdominal aortic aneurysm (AAA) is a prevalent disease which is of significant concern because of the morbidity associated with the continuing expansion of the abdominal aorta and its ultimate rupture. The transient interaction between blood flow and the wall contributes to wall stress which, if it exceeds the failure strength of the dilated arterial wall, will lead to aneurysm rupture. Utilizing a computational approach, the biomechanical environment of virtual AAAs can be evaluated to study the affects of asymmetry and wall thickness on this stress, two parameters that contribute to increased risk of aneurysm rupture.     

Fluid-structure interaction of deformable aortic prostheses with a bileaflet mechanical valve

Two different aortic prostheses can be used for performing the Bentall procedure: a standard straight graft and the Valsalva graft that better reproduces the aortic root anatomy. The aim of the present work is to study the effect of the graft geometry on the blood flow when a bileaflet mechanical heart valve is used, as well as to evaluate the stress concentration near the suture line where the coronary arteries are connected to graft. An accurate three-dimensional numerical method is proposed, based on the immersed boundary technique. The method accounts for the interactions between the flow and the motion of the rigid leaflets and of the deformable aortic root, under physiological pulsatile conditions. The results show that the graft geometry only slightly influences the leaflets dynamics, while using the Valsalva graft the stress level near the coronary-root anastomoses is about half that obtained using the standard straight graft.     

Inflammatory markers associated with abdominal aortic aneurysm

Purpose

Inflammation with leukocytic infiltration, degradation of extracellular matrix (ECM), and depletion of vascular smooth muscle cells (VSMC) are pathological hallmarks of abdominal aortic aneurysm (AAA). The aim of this study was to further evaluate relationships betweenAAAand inflammatory biomarkers, interleukin- 6 (IL-6), tumour necrosis factor-α (TNF-α), endothelin-1 (ET-1) and soluble urokinase-type plasminogen activator receptor (suPAR), by comparing levels in 65-year-old men with and without AAA at ultrasound screening.We also evaluated whether any biomarker can independently predict AAA at screening, and clarified potential correlations between aortic diameter and blood levels of these biomarkers.

Results

There were significant (p ? 0.05) differences between subjects with and without AAA for the following variables: p-leukocyte count (TLC) (p<0.001), p-homocysteine (p<0.001), p-TNF-α (p = 0.023), p-IL-6 (p<0.001), p-ET-1 (p = 0.002), p-suPAR (p<0.001), ankle brachial index (ABI) (p<0.001), plasma (p)-creatinine (p = 0.049), p-total cholesterol (p<0.001), p-high density lipoprotein (HDL) (p<0.001) and low density lipoprotein (LDL) cholesterol (p = 0.001), smoking habits (p<0.001), and use of antihypertensive (p<0.001) and lipid-lowering (p = 0.001) drugs. When the above variables were stepwise excluded in a logistic regression model, only p-IL-6 (p = 0.002), p-homocysteine (p = 0.015), p-HDL (p = 0.004), ABI in the right (p = 0.005) and left (p = 0.094) leg, smoking habits (p = 0.003), and antihypertensive drug use (p = 0.045), differed between groups. Significant correlations with aortic diameter existed for p-TNF-α (p = 0.028), p-IL-6 (p<0.001), p-ET-1 (p = 0.002) and p-suPAR (p<0.001) in the entire study population, and for p-TNF-α (p = 0.023), p-ET-1 (p = 0.009) and p-suPAR (p = 0.001) among men with AAA.

Conclusions

Several inflammatory biomarkers were significantly elevated and correlated with aortic diameter among 65-year old men with AAA at ultrasound screening. IL-6, homocysteine and use of antihypertensive medication remained elevated in the logistic regression model, together with known risk markers for AAA such as smoking and signs of atherosclerosis.

     

Biomechanics of abdominal aortic aneurysm

Abdominal aortic aneurysm (AAA) is a condition whereby the terminal aorta permanently dilates to dangerous proportions, risking rupture. The biomechanics of AAA has been studied with great interest since aneurysm rupture is a mechanical failure of the degenerated aortic wall and is a significant cause of death in developed countries. In this review article, the importance of considering the biomechanics of AAA is discussed, and then the history and the state-of-the-art of this field is reviewed--including investigations into the biomechanical behavior of AAA tissues, modeling AAA wall stress and factors which influence it, and the potential clinical utility of these estimates in predicting AAA rupture.     

Cathepsin A activity of a parietal thrombus of an abdominal aortic aneurysm

We evaluated the cathepsin A activity of a parietal thrombus of an abdominal aortic aneurysm. We compared this activity to that of a retracted blood clot homogenate. Cathepsin A of aneurysm parietal thrombus homogenate and blood clot homogenate showed the highest activity on Z-Phe-Ala. It was lower on Z-Phe-Phe, Z-Glu-Tyr, Z-Glu-Phe, Z-Gly-Phe, and the lowest activity was on Z-Gly-Ala. We conclude that cathepsin A's activity on a parietal thrombus of an aneurysm is much higher than blood clot cathepsin A activity.     

Identification of in vivo material and geometric parameters of a human aorta: toward patient-specific modeling of abdominal aortic aneurysm

Recent advances in computational modeling of vascular adaptations and the need for their extension to patient-specific modeling have introduced new challenges to the path toward abdominal aortic aneurysm modeling. First, the fundamental assumption in adaptation models, namely the existence of vascular homeostasis in normal vessels, is not easy to implement in a vessel model built from medical images. Second, subjecting the vessel wall model to the normal pressure often makes the configuration deviate from the original geometry obtained from medical images. To address those technical challenges, in this work, we propose a two-step optimization approach; first, we estimate constitutive parameters of a healthy human aorta intrinsic to the material by using biaxial test data and a weighted nonlinear least-squares parameter estimation method; second, we estimate the distributions of wall thickness and anisotropy using a 2-D parameterization of the vessel wall surface and a global approximation scheme integrated within an optimization routine. A direct search method is implemented to solve the optimization problem. The numerical optimization method results in a considerable improvement in both satisfying homeostatic condition and minimizing the deviation of geometry from the original shape based on in vivo images. Finally, the utility of the proposed technique for patient-specific modeling is demonstrated in a simulation of an abdominal aortic aneurysm enlargement.     

Hemodynamic effects of stent-graft introducer sheath during thoracic endovascular aortic repair

Biomechanics and Modeling in Mechanobiology - Thoracic endovascular aortic repair (TEVAR) has become the standard treatment of a variety of aortic pathologies. The objective of this study is to...     

Fluid-structure interaction simulation of artificial textile reinforced aortic heart valve: Validation with an in-vitro test

Prosthetic heart valves deployed in the left heart (aortic and mitral) are subjected to harsh hemodynamical conditions. Most of the tissue engineered heart valves have been developed for the low pressure pulmonary position because of the difficulties in fabricating a mechanically strong valve, able to withstand the systemic circulation. This necessitates the use of reinforcing scaffolds, resulting in a tissue-engineered textile reinforced tubular aortic heart valve. Therefore, to better design these implants, material behaviour of the composite, valve kinematics and its hemodynamical response need to be evaluated. Experimental assessment can be immensely time consuming and expensive, paving way for numerical studies. In this work, the material properties obtained using the previously proposed multi-scale numerical method for textile composites was evaluated for its accuracy. An in silico immersed boundary (IB) fluid structure interaction (FSI) simulation emulating the in vitro experiment was set-up to evaluate and compare the geometric orifice area and flow rate for one beat cycle. Results from the in silico FSI simulation were found to be in good coherence with the in vitro test during the systolic phase, while mean deviation of approximately 9% was observed during the diastolic phase of a beat cycle. Merits and demerits of the in silico IB-FSI method for the presented case study has been discussed with the advantages outweighing the drawbacks, indicating the potential towards an effective use of this framework in the development and analysis of heart valves.