Inside-out Z rings--constriction with and without GTP hydrolysis

The bacterial tubulin homologue FtsZ forms a ring-like structure called the Z ring that drives cytokinesis. We showed previously that FtsZ-YFP-mts, which has a short amphipathic helix (mts) on its C terminus that inserts into the membrane, can assemble contractile Z rings in tubular liposomes without any other protein. Here we study mts-FtsZ-YFP, where the membrane tether is switched to the opposite side of the protofilament. This assembled 'inside-out' Z rings that wrapped around the outside surface of tubular liposomes. The inside-out Z rings were highly dynamic, and generated a constriction force that squeezed the tubular liposomes from outside. This is consistent with models where the constriction force is generated by curved protofilaments bending the membrane. We used this system to test how GTP hydrolysis by FtsZ is involved in Z-ring constriction. Without GTP hydrolysis, Z rings could still assemble and generate an initial constriction. However, the constriction quickly stopped, suggesting that Z rings became rigidly stabilized in the absence of GTP hydrolysis. We propose that remodelling of the Z ring, mediated by GTP hydrolysis and exchange of subunits, is necessary for the continuous constriction.     

PomZ,a ParA‐like protein,regulates Z‐ring formation and cell division in Myxococcus xanthus

Accurate positioning of the division site is essential to generate appropriately sized daughter cells with the correct chromosome number. In bacteria, division generally depends on assembly of the tubulin homologue FtsZ into the Z‐ring at the division site. Here, we show that lack of the ParA‐like protein PomZ in Myxococcus xanthus resulted in division defects with the formation of chromosome‐free minicells and filamentous cells. Lack of PomZ also caused reduced formation of Z‐rings and incorrect positioning of the few Z‐rings formed. PomZ localization is cell cycle regulated, and PomZ accumulates at the division site at midcell after chromosome segregation but prior to FtsZ as well as in the absence of FtsZ. FtsZ displayed cooperative GTP hydrolysis in vitro but did not form detectable filaments in vitro. PomZ interacted with FtsZ in M. xanthus cell extracts. These data show that PomZ is important for Z‐ring formation and is a spatial regulator of Z‐ring formation and cell division. The cell cycle‐dependent localization of PomZ at midcell provides a mechanism for coupling cell cycle progression and Z‐ring formation. Moreover, the data suggest that PomZ is part of a system that recruits FtsZ to midcell, thereby, restricting Z‐ring formation to this position.     

Non-hydrolysable GTP-gamma-S stabilizes the FtsZ polymer in a GDP-bound state

FtsZ, a tubulin homologue, forms a cytokinetic ring at the site of cell division in prokaryotes. The ring is thought to consist of polymers that assemble in a strictly GTP-dependent way. GTP, but not guanosine-5'-O-(3-thiotriphosphate) (GTP-gamma-S), has been shown to induce polymerization of FtsZ, whereas in vitro Ca2+ is known to inhibit the GTP hydrolysis activity of FtsZ. We have studied FtsZ dynamics at limiting GTP concentrations in the presence of 10 mM Ca2+. GTP and its non-hydrolysable analogue GTP-gamma-S bind FtsZ with similar affinity, whereas the non-hydrolysable analogue guanylyl-imidodiphosphate (GMP-PNP) is a poor substrate. Preformed FtsZ polymers can be stabilized by GTP-gamma-S and are destabilized by GDP. As more than 95% of the nucleotide associated with the FtsZ polymer is in the GDP form, it is concluded that GTP hydrolysis by itself does not trigger FtsZ polymer disassembly. Strikingly, GTP-gamma-S exchanges only a small portion of the FtsZ polymer-bound GDP. These data suggest that FtsZ polymers are stabilized by a small fraction of GTP-containing FtsZ subunits. These subunits may be located either throughout the polymer or at the polymer ends, forming a GTP cap similar to tubulin.     

FtsZ and the division of bacterial cell

In this review we have tried to describe proteins and supermolecular structures which take part in the division of bacterial cell. The principal cell division protein of the most of prokaryotes is FtsZ, a homologue of eukaryotic tubulin. FtsZ just as tubulin is capable to bind and hydrolyze GTP. The division of bacterial cell begins with forming of so called divisome. The basis of such divisome is a contractile ring (Z ring); the ring encircles the cell about midcell. Z ring consists of a bundle of laterally bound protofilaments, which have been formed as a result of FtsZ polymerization. Z ring is rigidly bounded to cytozolic side of inner membrane with participation of FtsA, ZipA, FtsW and many other cell division proteins of divisome. The ring directs the process of cytokinesis transmitting power of constriction to membrane. Primary structures of members of the family of prokaryotic FtsZs differ from eukaryotic tubulines significantly except the region, where the site of GTP binding is placed. There is high degree of homology between structures of these proteins in the region. FtsZ is one of the most conservative proteins in prokaryotes, but ftsZ genes have not been found in completely sequenced genomes of several species of microorganisms. There are 2 species of mycoplasmas (Ureaplasma parvum and Mycoplasma mobile), Prostecobacter dejongeii, 10 species of chlamydia and 5 species of archaea among them. So these organisms divide without FtsZ. There are many open reading frames which encode proteins with unknown functions in genomes of U. parvum and M. mobile. The comparison of primary structures of these hypothetical proteins with structures of cell division proteins did not allow researchers to find similar proteins among them. We suppose that the process of cell division of these organisms should recruit proteins with function similar to FtsZ and having homologous with FtsZ or other cell division proteins spatial structures.     

Guanine nucleotide-dependent assembly of FtsZ into filaments.

FtsZ is an essential cell division protein that is localized to the leading edge of the bacterial septum in a cytokinetic ring. It contains the tubulin signature motif and is a GTP binding protein with a GTPase activity. Further comparison of FtsZ with eukaryotic tubulins revealed some additional sequence similarities, perhaps indicating a similar GTP binding site. Examination of FtsZ incubated in vitro by electron microscopy revealed a guanine nucleotide-dependent assembly into protein filaments, supporting the hypothesis that the FtsZ ring is formed through self-assembly. FtsZ3, which is unable to bind GTP, does not polymerize, whereas FtsZ2, which binds GTP but is deficient in GTP hydrolysis, is capable of polymerization.     

Bacterial division: the fellowship of the ring

The Z ring, composed of the tubulin homolog FtsZ, is essential for bacterial cell division. Recently a new protein, ZapA, has been discovered that localizes to the Z ring and stabilizes it, probably by promoting the bundling of FtsZ protofilaments.     

Direct interaction of FtsZ and MreB is required for septum synthesis and cell division in Escherichia coli

How bacteria coordinate cell growth with division is not well understood. Bacterial cell elongation is controlled by actin–MreB while cell division is governed by tubulin–FtsZ. A ring‐like structure containing FtsZ (the Z ring) at mid‐cell attracts other cell division proteins to form the divisome, an essential protein assembly required for septum synthesis and cell separation. The Z ring exists at mid‐cell during a major part of the cell cycle without contracting. Here, we show that MreB and FtsZ of Escherichia coli interact directly and that this interaction is required for Z ring contraction. We further show that the MreB–FtsZ interaction is required for transfer of cell‐wall biosynthetic enzymes from the lateral to the mature divisome, allowing cells to synthesise the septum. Our observations show that bacterial cell division is coupled to cell elongation via a direct and essential interaction between FtsZ and MreB.     

FtsA reshapes membrane architecture and remodels the Z‐ring in Escherichia coli

Cell division in prokaryotes initiates with assembly of the Z‐ring at midcell, which, in Escherichia coli, is tethered to the inner leaflet of the cytoplasmic membrane through a direct interaction with FtsA, a widely conserved actin homolog. The Z‐ring is comprised of polymers of tubulin‐like FtsZ and has been suggested to provide the force for constriction. Here, we demonstrate that FtsA exerts force on membranes causing redistribution of membrane architecture, robustly hydrolyzes ATP and directly engages FtsZ polymers in a reconstituted system. Phospholipid reorganization by FtsA occurs rapidly and is mediated by insertion of a C‐terminal membrane targeting sequence (MTS) into the bilayer and further promoted by a nucleotide‐dependent conformational change relayed to the MTS. FtsA also recruits FtsZ to phospholipid vesicles via a direct interaction with the FtsZ C‐terminus and regulates FtsZ assembly kinetics. These results implicate the actin homolog FtsA in establishment of a Z‐ring scaffold, while directly remodeling the membrane and provide mechanistic insight into localized cell wall remodeling, invagination and constriction at the onset of division.     

Mechanism of regulation of prokaryotic tubulin-like GTPase FtsZ by membrane protein EzrA

At initiation of cell division, FtsZ, a tubulin-like GTPase, assembles into a so-called Z-ring structure at the site of division. The formation of Z ring is negatively regulated by EzrA, which ensures only one ring at the midcell per cell cycle. The mechanism leading to the negative regulation of Z-ring formation by EzrA has been analyzed. Our data reveal that the interaction between EzrA and FtsZ not only reduces the GTP-binding ability of FtsZ but also accelerates the rate of GTP hydrolysis, both of which are unfavorable for the polymerization of FtsZ. Moreover, the acceleration in rate of GTP hydrolysis by EzrA is attributed to stabilization of the transition state for GTP hydrolysis and reduction in the affinity of GDP for FtsZ. Clearly, EzrA is able to modify the GTP hydrolysis cycle of FtsZ. On the basis of these results, a model for how EzrA acts to negatively regulate Z-ring formation is proposed.     

Investigation of regulation of FtsZ assembly by SulA and development of a model for FtsZ polymerization

In Escherichia coli FtsZ organizes into a cytoskeletal ring structure, the Z ring, which effects cell division. FtsZ is a GTPase, but the free energy of GTP hydrolysis does not appear to be used for generation of the constriction force, leaving open the question of the function of the GTPase activity of FtsZ. Here we study the mechanism by which SulA, an inhibitor of FtsZ induced during the SOS response, inhibits FtsZ function. We studied the effects of SulA on the in vitro activities of FtsZ, on Z rings in vivo, and on a kinetic model for FtsZ polymerization in silico. We found that the binding of SulA to FtsZ is necessary but not sufficient for inhibition of polymerization, since the assembly of FtsZ polymers in the absence of the GTPase activity was not inhibited by SulA. We developed a new model for FtsZ polymerization that accounts for the cooperativity of FtsZ and could account for cooperativity observed in other linear polymers. When SulA was included in the kinetic scheme, simulations revealed that SulA with strong affinity for FtsZ delayed, but did not prevent, the assembly of polymers when they were not hydrolyzing GTP. Furthermore, the simulations indicated that SulA controls the assembly of FtsZ by binding to a polymerization-competent form of the FtsZ molecule and preventing it from participating in assembly. In vivo stoichiometry of the disruption of Z rings by SulA suggests that FtsZ may undergo two cooperative transitions in forming the Z ring.     

FtsZ in Bacterial Cytokinesis: Cytoskeleton and Force Generator All in One

Summary: FtsZ, a bacterial homolog of tubulin, is well established as forming the cytoskeletal framework for the cytokinetic ring. Recent work has shown that purified FtsZ, in the absence of any other division proteins, can assemble Z rings when incorporated inside tubular liposomes. Moreover, these artificial Z rings can generate a constriction force, demonstrating that FtsZ is its own force generator. Here we review light microscope observations of how Z rings assemble in bacteria. Assembly begins with long-pitch helices that condense into the Z ring. Once formed, the Z ring can transition to short-pitch helices that are suggestive of its structure. FtsZ assembles in vitro into short protofilaments that are ∼30 subunits long. We present models for how these protofilaments might be further assembled into the Z ring. We discuss recent experiments on assembly dynamics of FtsZ in vitro, with particular attention to how two regulatory proteins, SulA and MinC, inhibit assembly. Recent efforts to develop antibacterial drugs that target FtsZ are reviewed. Finally, we discuss evidence of how FtsZ generates a constriction force: by protofilament bending into a curved conformation.     

Self-activation of guanosine triphosphatase activity by oligomerization of the bacterial cell division protein FtsZ.

The essential bacterial cell division protein FtsZ (filamentation temperature-sensitive protein Z) is a distant homologue to the eukaryotic cytoskeletal protein tubulin. We have examined the GTP hydrolytic activity of Escherichia coli FtsZ using a real-time fluorescence assay that monitors phosphate production. The GTPase activity shows a dramatic, nonlinear dependence on FtsZ concentration, with activity only observed at enzyme concentrations greater than 1 microM. At 5 microM FtsZ, we have determined a K(m) of 82 microM GTP and a V(max) of 490 nmol of P(i) min(-1) (mg of protein)(-1). Hydrolysis of GTP requires Mg(2+) and other divalent cations substitute only poorly for this requirement. We have compared the concentration dependence of FtsZ GTPase activity with the oligomeric state by use of analytical ultracentrifugation and chemical cross-linking. Equilibrium analytical ultracentrifugation experiments show that FtsZ exists as 68% dimer and 13% trimer at 2 microM total protein concentration. Chemical cross-linking of FtsZ also shows that monomer, dimer, trimer, and tetramer species are present at higher (>2 microM) FtsZ concentrations. However, as shown by analytical centrifugation, GDP-bound FtsZ is significantly shifted to the monomeric state, which suggests that GTP hydrolysis regulates polymer destabilization. We also monitored the effect of nucleotide and metal ion on the secondary structure of FtsZ; nucleotide yielded no evidence of structural changes in FtsZ, but both Mg(2+) and Ca(2+) had significant effects on secondary structure. Taken together, our results support the hypothesis that Mg(2+)-dependent GTP hydrolysis by FtsZ requires oligomerization of FtsZ. On the basis of these results and structural comparisons with the alpha-beta tubulin dimer, GTP is likely hydrolyzed in a shared active site formed between two monomer subunits.     

FtsA forms actin-like protofilaments

FtsA is an early component of the Z‐ring, the structure that divides most bacteria, formed by tubulin‐like FtsZ. FtsA belongs to the actin family of proteins, showing an unusual subdomain architecture. Here we reconstitute the tethering of FtsZ to the membrane via FtsA's C‐terminal amphipathic helix in vitro using Thermotoga maritima proteins. A crystal structure of the FtsA:FtsZ interaction reveals 16 amino acids of the FtsZ tail bound to subdomain 2B of FtsA. The same structure and a second crystal form of FtsA reveal that FtsA forms actin‐like protofilaments with a repeat of 48 Å. The identical repeat is observed when FtsA is polymerized using a lipid monolayer surface and FtsAs from three organisms form polymers in cells when overexpressed, as observed by electron cryotomography. Mutants that disrupt polymerization also show an elongated cell division phenotype in a temperature‐sensitive FtsA background, demonstrating the importance of filament formation for FtsA's function in the Z‐ring.     

Tethering the Z ring to the membrane through a conserved membrane targeting sequence in FtsA

The cytokinetic Z ring is required for bacterial cell division. It consists of polymers of FtsZ, the bacterial ancestor of eukaryotic tubulin, linked to the cytoplasmic membrane. Formation of a Z ring in Escherichia coli occurs as long as one of two proteins, ZipA or FtsA, is present. Both of these proteins bind FtsZ suggesting that they might function to tether FtsZ filaments to the membrane. Although ZipA has a transmembrane domain and therefore can function as a membrane anchor, interaction of FtsA with the membrane has not been explored. In this study we demonstrate that FtsA, which is structurally related to eukaryotic actin, has a conserved C-terminal amphipathic helix that is essential for FtsA function. It is required to target FtsA to the membrane and subsequently to the Z ring. As FtsA is much more widely conserved in bacteria than ZipA, it is likely that FtsA serves as the principal membrane anchor for the Z ring.     

Escherichia coli FtsZ polymers contain mostly GTP and have a high nucleotide turnover

The cell division protein FtsZ is a GTPase structurally related to tubulin and, like tubulin, it assembles in vitro into filaments, sheets and other structures. To study the roles that GTP binding and hydrolysis play in the dynamics of FtsZ polymerization, the nucleotide contents of FtsZ were measured under different polymerizing conditions using a nitrocellulose filter-binding assay, whereas polymerization of the protein was followed in parallel by light scattering. Unpolymerized FtsZ bound 1 mol of GTP mol(-1) protein monomer. At pH 7.5 and in the presence of Mg(2+) and K(+), there was a strong GTPase activity; most of the bound nucleotide was GTP during the first few minutes but, later, the amount of GTP decreased in parallel with depolymerization, whereas the total nucleotide contents remained invariant. These results show that the long FtsZ polymers formed in solution contain mostly GTP. Incorporation of nucleotides into the protein was very fast either when the label was introduced at the onset of the reaction or subsequently during polymerization. Molecular modelling of an FtsZ dimer showed the presence of a cleft between the two subunits maintaining the nucleotide binding site open to the medium. These results show that the FtsZ polymers are highly dynamic structures that quickly exchange the bound nucleotide, and this exchange can occur in all the subunits.     

GTP hydrolysis of cell division protein FtsZ: evidence that the active site is formed by the association of monomers.

The essential prokaryotic cell division protein FtsZ is a tubulin homologue that forms a ring at the division site. FtsZ forms polymers in a GTP-dependent manner. Recent biochemical evidence has shown that FtsZ forms multimeric structures in vitro and in vivo and functions as a self-activating GTPase. Structural analysis of FtsZ points to an important role for the highly conserved tubulin-like loop 7 (T7-loop) in the self-activation of GTP hydrolysis. The T7-loop was postulated to form the active site together with the nucleotide-binding site on an adjacent FtsZ monomer. To characterize the role of the T7-loop of Escherichia coli FtsZ, we have mutagenized residues M206, N207, D209, D212, and R214. All the mutant proteins, except the R214 mutant, are severely affected in polymerization and GTP hydrolysis. Charged residues D209 and D212 cannot be substituted with a glutamate residue. All mutants interact with wild-type FtsZ in vitro, indicating that the T7-loop mutations do not abolish FtsZ self-association. Strikingly, in mixtures of wild-type and mutant proteins, most mutants are capable of inhibiting wild-type GTP hydrolysis. We conclude that the T7-loop is part of the active site for GTP hydrolysis, formed by the association of two FtsZ monomers.     

Rate-limiting guanosine 5'-triphosphate hydrolysis during nucleotide turnover by FtsZ, a prokaryotic tubulin homologue involved in bacterial cell division

FtsZ is a prokaryotic tubulin homologue that polymerizes into a dynamic ring during cell division. GTP binding and hydrolysis provide the energy for FtsZ dynamics. However, the precise role of hydrolysis in polymer assembly and turnover is not understood, limiting our understanding of how FtsZ functions in the cell. Here we investigate GTP hydrolysis during the FtsZ polymerization cycle using several complementary approaches that avoid technical caveats of previous studies. We find that at steady state approximately 80% of FtsZ polymer subunits are bound to GTP. In addition, we use pre-steady-state, single turnover assays to directly measure the rate of hydrolysis. Hydrolysis was found to occur at approximately 8/min and to be a rate-limiting step in GTP turnover; phosphate release rapidly followed. These results clarify previously conflicting results in the literature and suggest that pure FtsZ polymers, unlike microtubules, may not be able to undergo dynamic instability or to store energy in the polymer for force production.     

Assembly of archaeal cell division protein FtsZ and a GTPase-inactive mutant into double-stranded filaments

We have studied the assembly and GTPase of purified FtsZ from the hyperthermophilic archaeon Methanococcus jannaschii, a structural homolog of eukaryotic tubulin, employing wild-type FtsZ, FtsZ-His6 (histidine-tagged FtsZ), and the new mutants FtsZ-W319Y and FtsZ-W319Y-His6, with light scattering, nucleotide analyses, electron microscopy, and image processing methods. This has revealed novel properties of FtsZ. The GTPase of archaeal FtsZ polymers is suppressed in Na+-containing buffer, generating stabilized structures that require GDP addition for disassembly. FtsZ assembly is polymorphic. Archaeal FtsZ(wt) assembles into associated and isolated filaments made of two parallel protofilaments with a 43 A longitudinal spacing between monomers, and this structure is also observed in bacterial FtsZ from Escherichia coli. The His6 extension facilitates the artificial formation of helical tubes and sheets. FtsZ-W319Y-His6 is an inactivated GTPase whose assembly remains regulated by GTP and Mg2+. It forms two-dimensional crystals made of symmetrical pairs of tubulin-like protofilaments, which associate in an antiparallel array (similarly to the known Ca2+-induced sheets of FtsZ-His6). In contrast to the lateral interactions of microtubule protofilaments, we propose that the primary assembly product of FtsZ is the double-stranded filament, one or several of which might form the dynamic Z ring during prokaryotic cell division.     

Structural Change in FtsZ Induced by Intermolecular Interactions between Bound GTP and the T7 Loop

FtsZ is a prokaryotic homolog of tubulin and is a key molecule in bacterial cell division. FtsZ with bound GTP polymerizes into tubulin-like protofilaments. Upon polymerization, the T7 loop of one subunit is inserted into the nucleotide-binding pocket of the second subunit, which results in GTP hydrolysis. Thus, the T7 loop is important for both polymerization and hydrolysis in the tubulin/FtsZ family. Although x-ray crystallography revealed both straight and curved conformations of tubulin, only a curved structure was known for FtsZ. Recently, however, FtsZ from Staphylococcus aureus has been shown to have a very different conformation from the canonical FtsZ structure. The present study was performed to investigate the structure of FtsZ from Staphylococcus aureus by mutagenesis experiments; the effects of amino acid changes in the T7 loop on the structure as well as on GTPase activity were studied. These analyses indicated that FtsZ changes its conformation suitable for polymerization and GTP hydrolysis by movement between N- and C-subdomains via intermolecular interactions between bound nucleotide and residues in the T7 loop.     

Structural insights into FtsZ protofilament formation

The prokaryotic tubulin homolog FtsZ polymerizes into a ring structure essential for bacterial cell division. We have used refolded FtsZ to crystallize a tubulin-like protofilament. The N- and C-terminal domains of two consecutive subunits in the filament assemble to form the GTPase site, with the C-terminal domain providing water-polarizing residues. A domain-swapped structure of FtsZ and biochemical data on purified N- and C-terminal domains show that they are independent. This leads to a model of how FtsZ and tubulin polymerization evolved by fusing two domains. In polymerized tubulin, the nucleotide-binding pocket is occluded, which leads to nucleotide exchange being the rate-limiting step and to dynamic instability. In our FtsZ filament structure the nucleotide is exchangeable, explaining why, in this filament, nucleotide hydrolysis is the rate-limiting step during FtsZ polymerization. Furthermore, crystal structures of FtsZ in different nucleotide states reveal notably few differences.