Low free energy cost of very long loop insertions in proteins

Long insertions into a loop of a folded host protein are expected to have destabilizing effects because of the entropic cost associated with loop closure unless the inserted sequence adopts a folded structure with amino- and carboxy-termini in close proximity. A loop entropy reduction screen based on this concept was used in an attempt to retrieve folded sequences from random sequence libraries. A library of long random sequences was inserted into a loop of the SH2 domain, displayed on the surface of M13 phage, and the inserted sequences that did not disrupt SH2 function were retrieved by panning using beads coated with a phosphotyrosine containing SH2 peptide ligand. Two sequences of a library of 2 x 10(8) sequences were isolated after multiple rounds of panning, and were found to have recovery levels similar to the wild-type SH2 domain and to be relatively intolerant to further mutation in PCR mutagenesis experiments. Surprisingly, although these inserted sequences exhibited little nonrandom structure, they do not significantly destabilize the host SH2 domain. Additional insertion variants recovered at lower levels in the panning experiments were also found to have a minimal effect on the stability and peptide-binding function of the SH2 domain. The additional level of selection present in the panning experiments is likely to involve in vivo folding and assembly, as there was a rough correlation between recovery levels in the phage-panning experiments and protein solubility. The finding that loop insertions of 60-80 amino acids have minimal effects on SH2 domain stability suggests that the free energy cost of inserting long loops may be considerably less than polymer theory estimates based on the entropic cost of loop closure, and, hence, that loop insertion may have provided an evolutionary route to multidomain protein structures.     

Dissection of a (betaalpha)8-barrel enzyme into two folded halves

The (betaalpha)8-barrel, which is the most frequently encountered protein fold, is generally considered to consist of a single structural domain. However, the X-ray structure of the imidazoleglycerol phosphate synthase (HisF) from Thermotoga maritima has identified it as a (betaalpha) 8-barrel made up of two superimposable subdomains (HisF-N and HisF-C). HisF-N consists of the four N-terminal (betaalpha) units and HisF-C of the four C-terminal (betaalpha) units. It has been postulated, therefore, that HisF evolved by tandem duplication and fusion from an ancestral half-barrel. To test this hypothesis, HisF-N and HisF-C were produced in Escherichia coli, purified and characterized. Separately, HisF-N and HisF-C are folded proteins, but are catalytically inactive. Upon co-expression in vivo or joint refolding in vitro, HisF-N and HisF-C assemble to the stoichiometric and catalytically fully active HisF-NC complex. These findings support the hypothesis that the (betaalpha)8-barrel of HisF evolved from an ancestral half-barrel and have implications for the folding mechanism of the members of this large protein family.     

Long-range side-chain-main-chain interactions play crucial roles in stabilizing the (betaalpha)8 barrel motif of the alpha subunit of tryptophan synthase

The role of hither-to-fore unrecognized long-range hydrogen bonds between main-chain amide hydrogens and polar side chains on the stability of a well-studied (betaalpha)8, TIM barrel protein, the alpha subunit of tryptophan synthase (alphaTS), was probed by mutational analysis. The F19-D46 and I97-D124 hydrogen bonds link the N terminus of a beta-strand with the C terminus of the succeeding antiparallel alpha-helix, and the A103-D130 hydrogen bond links the N terminus of an alpha-helix with the C terminus of the succeeding antiparallel beta-strand, forming clamps for the respective betaalpha or alphabeta hairpins. The individual replacement of these aspartic acid side chains with alanine leads to what appear to be closely related partially folded structures with significantly reduced far-UV CD ellipticity and thermodynamic stability. Comparisons with the effects of eliminating another main-chain-side-chain hydrogen bond, G26-S33, and two electrostatic side-chain-side-chain hydrogen bonds, D38-H92 and D112-H146, all in the same N-terminal folding unit of alphaTS, demonstrated a unique role for the clamp interactions in stabilizing the native barrel conformation. Because neither the asparagine nor glutamic acid variant at position 46 can completely reproduce the spectroscopic, thermodynamic, or kinetic folding properties of aspartic acid, both size and charge are crucial to its unique role in the clamp hydrogen bond. Kinetic studies suggest that the three clamp hydrogen bonds act in concert to stabilize the transition state leading to the fully folded TIM barrel motif.     

Sequence composition effects on denatured state loop formation in iso-1-cytochrome c variants: polyalanine versus polyglycine inserts

Protein folding is dependent on the formation and persistence of simple loops during the earliest events of the folding process. Ease of loop formation and persistence is believed to be dependent on the steric properties of the residues involved in loop formation. We have investigated this conformational factor in the denatured state of iso-1-cytchrome c using a five alanine insert in front of a unique histidine in the N-terminal region of the protein. The alanine residues have then been progressively substituted with sterically less-constrained glycine residues. Guanidine-HCl unfolding shows that all variants have a free energy of unfolding of approximately 2 kcal/mol. The low stability of these variants is well accounted for by stabilization of the denatured state by histidine-heme loop formation. The stability of the 22 residue histidine-heme loop has been measured in 3 M guanidine hydrochloride for all variants. Surprisingly, relative to alanine, glycine has only a very modest effect on equilibrium loop stability. Thus, the greater flexibility that glycine confers on the main-chain provides no advantage in terms of the persistence of simple loops early in folding. The underlying basis for the similar behavior of loops with polyalanine versus polyglycine inserts is discussed in terms of the current knowledge of the structure and loop formation kinetics of glycine versus alanine-rich peptides.     

Optimization of a β‐sheet‐cap for long loop closure

Protein loops make up a large portion of the secondary structure in nature. But very little is known concerning loop closure dynamics and the effects of loop composition on fold stability. We have designed a small system with stable β‐sheet structures, including features that allow us to probe these questions. Using paired Trp residues that form aromatic clusters on folding, we are able to stabilize two β‐strands connected by varying loop lengths and composition (an example sequence: R W ITVTI – loop – KKIRV W E). Using NMR and CD, both fold stability and folding dynamics can be investigated for these systems. With the 16 residue loop peptide (sequence: R W ITVTI‐(GGGGKK)₂GGGG‐KKIRV W E) remaining folded (ΔG_U = 1.6 kJ/mol at 295K). To increase stability and extend the series to longer loops, we added an additional Trp/Trp pair in the loop flanking position. With this addition to the strands, the 16 residue loop (sequence: R W ITVRI W ‐(GGGGKK)₂GGGG‐ W KTIRV W E) supports a remarkably stable β‐sheet (ΔG_U = 6.3 kJ/mol at 295 K, T_m = ～55°C). Given the abundance of loops in binding motifs and between secondary structures, these constructs can be powerful tools for peptide chemists to study loop effects; with the Trp/Trp pair providing spectroscopic probes for assessing both stability and dynamics by NMR.     

Analysis of membrane topology of the human reduced folate carrier protein by hemagglutinin epitope insertion and scanning glycosylation insertion mutagenesis

The human reduced folate carrier (RFC) is the major membrane transport system for both reduced folates and chemotherapeutic antifolate drugs, such as methotrexate (MTX). Although the RFC protein has been subjected to intensive study in order to identify critical structural and functional determinants of transport, it is impossible to assess the significance of these studies without characterizing the essential domain structure and membrane topology. The primary amino acid sequence from the cloned cDNAs predicts that the human RFC protein has 12 transmembrane domains (TMDs) with a large cytosolic loop between TMDs 6 and 7, and cytosolic-facing N- and C-termini. To establish the RFC membrane topology, a hemagglutinin (HA) epitope was inserted into the individual predicted intracellular and extracellular loops. HA insertions into putative TMD interconnecting loops 3/4, 6/7, 7/8, and 8/9, and the N- and C-termini all preserved MTX transport activity upon expression in transport-impaired K562 cells. Immunofluorescence detection with HA-specific antibody under both permeabilized and non-permeabilized conditions confirmed extracellular orientations for loops 3/4 and 7/8, and cytosolic orientations for loops 6/7 and 8/9, and the N- and C-termini. Insertion of a consensus N-glycosylation site [NX(S/T)] into putative loops 5/6, 8/9, and 9/10 of deglycosylated RFC-Gln(58) had minimal effects on MTX transport. Analysis of glycosylation status on Western blots suggested an extracellular orientation for loop 5/6, and intracellular orientations for loops 8/9 and 9/10. Our findings strongly support the predicted topology model for TMDs 1-8 and the C-terminus of human RFC. However, our results raise the possibility of an alternative membrane topology for TMDs 9-12.     

Analysis of membrane topology of the human reduced folate carrier protein by hemagglutinin epitope insertion and scanning glycosylation insertion mutagenesis

The human reduced folate carrier (RFC) is the major membrane transport system for both reduced folates and chemotherapeutic antifolate drugs, such as methotrexate (MTX). Although the RFC protein has been subjected to intensive study in order to identify critical structural and functional determinants of transport, it is impossible to assess the significance of these studies without characterizing the essential domain structure and membrane topology. The primary amino acid sequence from the cloned cDNAs predicts that the human RFC protein has 12 transmembrane domains (TMDs) with a large cytosolic loop between TMDs 6 and 7, and cytosolic-facing N- and C-termini. To establish the RFC membrane topology, a hemagglutinin (HA) epitope was inserted into the individual predicted intracellular and extracellular loops. HA insertions into putative TMD interconnecting loops 3/4, 6/7, 7/8, and 8/9, and the N- and C-termini all preserved MTX transport activity upon expression in transport-impaired K562 cells. Immunofluorescence detection with HA-specific antibody under both permeabilized and non-permeabilized conditions confirmed extracellular orientations for loops 3/4 and 7/8, and cytosolic orientations for loops 6/7 and 8/9, and the N- and C-termini. Insertion of a consensus N-glycosylation site [NX(S/T)] into putative loops 5/6, 8/9, and 9/10 of deglycosylated RFC-Gln⁵⁸ had minimal effects on MTX transport. Analysis of glycosylation status on Western blots suggested an extracellular orientation for loop 5/6, and intracellular orientations for loops 8/9 and 9/10. Our findings strongly support the predicted topology model for TMDs 1-8 and the C-terminus of human RFC. However, our results raise the possibility of an alternative membrane topology for TMDs 9-12.     

Active TEM-1 beta-lactamase mutants with random peptides inserted in three contiguous surface loops

Engineering of alternative binding sites on the surface of an enzyme while preserving the enzymatic activity would offer new opportunities for controlling the activity by binding of non-natural ligands. Loops and turns are the natural substructures in which binding sites might be engineered with this purpose. We have genetically inserted random peptide sequences into three relatively rigid and contiguous loops of the TEM-1 beta-lactamase and assessed the tolerance to insertion by the percentage of active mutants. Our results indicate that tolerance to insertion could not be correlated to tolerance to mutagenesis. A turn between two beta-strands bordering the active site was observed to be tolerant to random mutagenesis but not to insertions. Two rigid loops comprising rather well-conserved amino acid residues tolerated insertions, although with some constraints. Insertions between the N-terminal helix and the first beta-strand generated active libraries if cysteine residues were included at both ends of the insert, suggesting the requirement for a stabilizing disulfide bridge. Random sequences were relatively well accommodated within the loop connecting the final beta-strand to the C-terminal helix, particularly if the wild-type residue was retained at one of the loops' end. This suggests two strategies for increasing the percentage of active mutants in insertion libraries. The amino acid distribution in the engineered loops was analyzed and found to be less biased against hydrophobic residues than in natural medium-sized loops. The combination of these activity-selected libraries generated a huge library containing active hybrid enzymes with all three loops modified.     

Framework residue 71 is a major determinant of the position and conformation of the second hypervariable region in the VH domains of immunoglobulins

Analysis of the immunoglobulins of known structure reveals systematic differences in the position and main-chain conformation of the second hypervariable region of the VH domain (H2). We show that the major determinant of the position of H2 is the size of the residue at site 71, a site that is in the conserved framework of the VH domain. It is likely that for about two thirds of the known VH sequences the size of the residue at this site is also a major determinant of the conformation of H2. This effect can override the predisposition of the sequence, as in the case of the H2 loop of J539, which is an exception to the rules relating sequence and conformation of short hairpin loops. Understanding the relationship between the residue at position 71 and the position and conformation of H2 has applications to the prediction and engineering of antigen-binding sites of immunoglobulins.     

Structure and function of mutationally generated monomers of dimeric phosphoribosylanthranilate isomerase from Thermotoga maritima

BACKGROUND: Oligomeric proteins may have been selected for in hyperthermophiles because subunit association provides extra stabilization. Phosphoribosylanthranilate isomerase (PRAI) is monomeric and labile in most mesophilic microorganisms, but dimeric and stable in the hyperthermophile Thermotoga maritima (tPRAI). The two subunits of tPRAI are associated back-to-back and are locked together by a hydrophobic loop. The hypothesis that dimerization is important for thermostability has been tested by rationally designing monomeric variants of tPRAI. RESULTS: The comparison of tPRAI and PRAI from Escherichia coli (ePRAI) suggested that levelling the nonplanar dimer interface would weaken the association. The deletion of two residues in the loop loosened the dimer. Subsequent filling of the adjacent pocket and the exchange of polar for apolar residues yielded a weakly associating and a nonassociating monomeric variant. Both variants are as active as the parental dimer but far more thermolabile. The thermostability of the weakly associating monomer increased significantly with increasing protein concentration. The X-ray structure of the nonassociating monomer differed from that of the parental subunit only in the restructured interface. The orientation of the original subunits was maintained in a crystal contact between two monomers. CONCLUSIONS: tPRAI is dimeric for reasons of stability. The clearly separated responsibilities of the betaalpha loops, which are involved in activity, and the alphabeta loops, which are involved in protein stability, has permitted the evolution of dimers without compromising their activity. The preserved interaction in the crystal contacts suggests the most likely model for dimer evolution.     

Novel topological features of FhaC, the outer membrane transporter involved in the secretion of the Bordetella pertussis filamentous hemagglutinin

Many pathogenic Gram-negative bacteria secrete virulence factors across the cell envelope into the extracellular milieu. The secretion of filamentous hemagglutinin (FHA) by Bordetella pertussis depends on the pore-forming outer membrane protein FhaC, which belongs to a growing family of protein transporters. Protein alignment and secondary structure predictions indicated that FhaC is likely to be a beta-barrel protein with an odd number of transmembrane beta-strands connected by large surface loops and short periplasmic turns. The membrane topology of FhaC was investigated by random insertion of the c-Myc epitope and the tobacco etch virus protease-specific cleavage sequence. FhaC was fairly permissive to short linker insertions. Furthermore, FhaC appeared to undergo conformational changes upon FHA secretion. Surface detection of the inserted sequences indicated that several predicted loops in the C-terminal moiety as well as the N terminus of the protein are exposed. However, a large surface-predicted region in the N-terminal moiety of FhaC was inaccessible from the surface. In addition, the activity and the stability of the protein were affected by insertions in that region, indicating that it may have important structural and/or functional roles. The surface exposure of the N terminus and the presence of an odd number of beta-strands are novel features for beta-barrel outer membrane proteins.     

Evolution of CuZn superoxide dismutase and the Greek key beta-barrel structural motif

Detailed analysis of the CuZn superoxide dismutase (SOD) structure provides new results concerning the significance and molecular basis for sequence conservation, intron-exon boundary locations, gene duplication, and Greek key beta-barrel evolution. Using 15 aligned sequences, including a new mouse sequence, specific roles have been assigned to all 23 invariant residues and additional residues exhibiting functional equivalence. Sequence invariance is dominated by 15 residues that form the active site stereochemistry, supporting a primary biological function of superoxide dismutation. The beta-strands have no sequence insertions and deletions, whereas insertions occur within the loops connecting the beta-strands and at both termini. Thus, the beta-barrel with only four invariant residues is apparently over-determined, but dependent on multiple cooperative side chain interactions. The regions encoded by exon I, a proposed nucleation site for protein folding, and exon III, the Zn loop involved in stability and catalysis, are the major structural subdomains not included in the internal twofold axis of symmetry passing near the catalytic Cu ion. This provides strong confirmatory evidence for gene evolution by duplication and fusion followed by the addition of these two exons. The proposed evolutionary pathway explains the structural versatility of the Greek key beta-barrel through functional specialization and subdomain insertions in new loop connections, and provides a rationale for the size of the present day enzyme.     

Solution structure of the N-terminal domain of a potential copper-translocating P-type ATPase from Bacillus subtilis in the apo and Cu(I) loaded states

A putative partner of the already characterized CopZ from Bacillus subtilis was found, both proteins being encoded by genes located in the same operon. This new protein is highly homologous to eukaryotic and prokaryotic P-type ATPases such as CopA, Ccc2 and Menkes proteins. The N-terminal region of this protein contains two soluble domains constituted by amino acid residues 1 to 72 and 73 to 147, respectively, which were expressed both separately and together. In both cases only the 73-147 domain is folded and is stable both in the copper(I)-free and in the copper(I)-bound forms. The folded and unfolded state is monitored through the chemical shift dispersion of 15N-HSQC spectra. In the absence of any structural characterization of CopA-type proteins, we determined the structure of the 73-147 domain in the 1-151 construct in the apo state through 1H, 15N and 13C NMR spectroscopies. The structure of the Cu(I)-loaded 73-147 domain has been also determined in the construct 73-151. About 1300 meaningful NOEs and 90 dihedral angles were used to obtain structures at high resolution both for the Cu(I)-bound and the Cu(I)-free states (backbone RMSD to the mean 0.35(+/-0.06) A and 0.39(+/-0.07) A, respectively). The structural assessment shows that the structures are accurate. The protein has the typical betaalpha(betabeta)alphabeta folding with a cysteine in the C-terminal part of helix alpha1 and the other cysteine in loop 1. The structures are similar to other proteins involved in copper homeostasis. Particularly, between BsCopA and BsCopZ, only the charges located around loop 1 are reversed for BsCopA and BsCopZ, thus suggesting that the two proteins could interact one with the other. The variability in conformation displayed by the N-terminal cysteine of the CXXC motif in a number of structures of copper transporting proteins suggests that this may be the cysteine which binds first to the copper(I) carried by the partner protein.     

Recurrent alpha beta loop structures in TIM barrel motifs show a distinct pattern of conserved structural features.

A systematic survey of seven parallel alpha/beta barrel protein domains, based on exhaustive structural comparisons, reveals that a sizable proportion of the alpha beta loops in these proteins--20 out of a total of 49--belong to either one of two loop types previously described by Thornton and co-workers. Six loops are of the alpha beta 1 type, with one residue between the alpha-helix and beta-strand, and 13 are of the alpha beta 3 type, with three residues between the helix and the strand. Protein fragments embedding the identified loops, and termed alpha beta connections since they contain parts of the flanking helix and strand, have been analyzed in detail revealing that each type of connection has a distinct set of conserved structural features. The orientation of the beta-strand relative to the helix and loop portions is different owing to a very localized difference in backbone conformation. In alpha beta 1 connections, the chain enters the beta-strand via a residue adopting an extended conformation, while in alpha beta 3 it does so via a residue in a near alpha-helical conformation. Other conserved structural features include distinct patterns of side chain orientation relative to the beta-sheet surface and of main chain H-bonds in the loop and the beta-strand moieties. Significant differences also occur in packing interactions of conserved hydrophobic residues situated in the last turn of the helix. Yet the alpha-helix surface of both types of connections adopts similar orientations relative to the barrel sheet surface. Our results suggest furthermore that conserved hydrophobic residues along the sequence of the connections, may be correlated more with specific patterns of interactions made with neighboring helices and sheet strands than with helix/strand packing within the connection itself. A number of intriguing observations are also made on the distribution of the identified alpha beta 1 and alpha beta 3 loops within the alpha/beta-barrel motifs. They often occur adjacent to each other; alpha beta 3 loops invariably involve even numbered beta-strands, while alpha beta 1 loops involve preferentially odd beta-strands; all the analyzed proteins contain at least one alpha beta 3 loop in the first half of the eightfold alpha/beta barrel. Possible origins of all these observations, and their relevance to the stability and folding of parallel alpha/beta barrel motifs are discussed.     

Functionally accepted insertions of proteins within protein domains

Experiments were designed to explore the tolerance of protein structure and folding to very large insertions of folded protein within a structural domain. Dihydrofolate reductase and beta-lactamase have been inserted in four different positions of phosphoglycerate kinase. The resultant chimeric proteins are all overexpressed, and the host as well as the inserted partners are functional. Although not explicitly designed, functional coupling between the two fused partners was observed in some of the chimeras. These results show that the tolerance of protein structures to very large structured insertions is more general than previously expected and supports the idea that the natural sequence continuity of a structural domain is not required for the folding process. These results directly suggest a new experimental approach to screen, for example, for folded protein in randomized polypeptide sequences.     

Structure and interactions with RNA of the N-terminal UUAG-specific RNA-binding domain of hnRNP D0

Heterogeneous nuclear ribonucleoprotein (hnRNP) D0 has two ribonucleoprotein (RNP)-type RNA-binding domains (RBDs), each of which can bind solely to the UUAG sequence specifically. The structure of the N-terminal RBD (RBD1) determined by NMR is presented here. It folds into a compact alphabeta structure comprising a four-stranded antiparallel beta-sheet packed against two alpha-helices, which is characteristic of the RNP-type RBDs. Special structural features of RBD1 include N-capping boxes for both alpha-helices, a beta-bulge in the second beta-strand, and an additional short antiparallel beta-sheet coupled with a beta-turn-like structure in a loop. Two hydrogen bonds which restrict the positions of loops were identified. Backbone resonance assignments for RBD1 complexed with r(UUAGGG) revealed that the overall folding is maintained in the complex. The candidate residues involved in the interactions with RNA were identified by chemical shift perturbation analysis. They are located in the central and peripheral regions of the RNA-binding surface composed of the four-stranded beta-sheet, loops, and the C-terminal region. It is suggested that non-specific interactions with RNA are performed by the residues in the central region of the RNA-binding surface, while specific interactions are performed by those in the peripheral regions. It was also found that RBD1 has the ability to inhibit the formation of the quadruplex structure.     

A computational method for the design of nested proteins by loop‐directed domain insertion

The computational design of novel nested proteins—in which the primary structure of one protein domain (insert) is flanked by the primary structure segments of another (parent)—would enable the generation of multifunctional proteins. Here we present a new algorithm, called Loop‐Directed Domain Insertion (LooDo), implemented within the Rosetta software suite, for the purpose of designing nested protein domain combinations connected by flexible linker regions. Conformational space for the insert domain is sampled using large libraries of linker fragments for linker‐to‐parent domain superimposition followed by insert‐to‐linker superimposition. The relative positioning of the two domains (treated as rigid bodies) is sampled efficiently by a grid‐based, mutual placement compatibility search. The conformations of the loop residues, and the identities of loop as well as interface residues, are simultaneously optimized using a generalized kinematic loop closure algorithm and Rosetta EnzymeDesign, respectively, to minimize interface energy. The algorithm was found to consistently sample near‐native conformations and interface sequences for a benchmark set of structurally similar but functionally divergent domain‐inserted enzymes from the α/β hydrolase superfamily, and discriminates well between native and nonnative conformations and sequences, although loop conformations tended to deviate from the native conformations. Furthermore, in cross‐domain placement tests, native insert‐parent domain combinations were ranked as the best‐scoring structures compared to nonnative domain combinations. This algorithm should be broadly applicable to the design of multi‐domain protein complexes with any combination of inserted or tandem domain connections.     

The dual role of a loop with low loop contact distance in folding and domain swapping

Alpha helices, beta strands, and loops are the basic building blocks of protein structure. The folding kinetics of alpha helices and beta strands have been investigated extensively. However, little is known about the formation of loops. Experimental studies show that for some proteins, the formation of a single loop is the rate-determining step for folding, whereas for others, a loop (or turn) can misfold to serve as the hinge loop region for domain-swapped species. Computer simulations of an all-atom model of fragment B of Staphylococcal protein A found that the formation of a single loop initiates the dominant folding pathway. On the other hand, the stability analysis of intermediates suggests that the same loop is a likely candidate to serve as a hinge loop for domain swapping. To interpret the simulation result, we developed a simple structural parameter: the loop contact distance (LCD), or the sequence distance of contacting residues between a loop and the rest of the protein. The parameter is applied to a number of other proteins, including SH3 domains and prion protein. The results suggest that a locally interacting loop (low LCD) can either promote folding or serve as the hinge region for domain swapping. Thus, there is an intimate connection between folding and domain swapping, a possible cause of misfolding and aggregation.     

Consequences of Domain Insertion on the Stability and Folding Mechanism of a Protein

SlyD, the sensitive-to-lysis protein from Escherichia coli, consists of two domains. They are not arranged successively along the protein chain, but one domain, the “insert-in-flap” (IF) domain, is inserted internally as a guest into a surface loop of the host domain, which is a prolyl isomerase of the FK506 binding protein (FKBP) type. We used SlyD as a model to elucidate how such a domain insertion affects the stability and folding mechanism of the host and the guest domain. For these studies, the two-domain protein was compared with a single-domain variant SlyDΔIF, SlyD* without the chaperone domain (residues 1-69 and 130-165) in which the IF domain was removed and replaced by a short loop, as present in human FKBP12. Equilibrium unfolding and folding kinetics followed an apparent two-state mechanism in the absence and in the presence of the IF domain. The inserted domain decreased, however, the stability of the host domain in the transition region and decelerated its refolding reaction by about 10-fold. This originates from the interruption of the chain connectivity by the IF domain and its inherent instability. To monitor folding processes in this domain selectively, a Trp residue was introduced as fluorescent probe. Kinetic double-mixing experiments revealed that, in intact SlyD, the IF domain folds and unfolds about 1000-fold more rapidly than the FKBP domain, and that it is strongly stabilized when linked with the folded FKBP domain. The unfolding limbs of the kinetic chevrons of SlyD show a strong downward curvature. This deviation from linearity is not caused by a transition-state movement, as often assumed, but by the accumulation of a silent unfolding intermediate at high denaturant concentrations. In this kinetic intermediate, the FKBP domain is still folded, whereas the IF domain is already unfolded.