The effect of surface charge density on valinomycin-K+ complex formation in model membranes

The model membrane approach was used to investigate the surface charge effect on the ion-antibiotic complexation process. Mixed monolayers of valinomycin and lipids were spread on subphases containing K⁺ or Na⁺. The surface charge density was modified by spreading ionizable valinomycin analogs on aqueous subphases of different pH or by changing the nature of the lipid (neutral, negatively charged) in the mixed film. Surface pressure and surface potential measurements demonstrated that a neutral lipid (phosphatidylcholine) or positively charged valinomycin analogs didn't enhance the antibiotic complexing capacity. However, a maximal complexation is reached for a critical lipid concentration in the valinomycin-phosphatidylserine mixed film. The role of the surface charge on the valinomycin complexing properties was examined in terms of the Gouy-Chapman theory. As a consequence of the negative charge of the lipid monolayer, the K⁺ concentration near the surface is larger than the bulk concentration, by a Boltzmann factor. A good agreement was observed between the experimental results and the theoretical predictions. Conductance measurements of asymmetric bilayers containing a neutral lipid (egg lecithin) on one side and a negatively charged lipid (phosphatidylserine) on the other, confirm the role of the surface charge. Indeed, addition of K⁺ to the neutral side of the bilayer containing valinomycin had no effect on the conductance whereas addition of K⁺ to the charged side of the bilayer caused a 80-fold conductance increase.     

Effects of phospholipid surface charge on ion conduction in the K+ channel of sarcoplasmic reticulum.

Single-channel K+ currents through sarcoplasmic reticulum K+ channels were compared after reconstitution into planar bilayers formed from neutral or negatively charged phospholipids. In neutral bilayers, the channel conductance saturates with K+ concentration according to a rectangular hyperbola, with half-saturation at 40 mM K+, and maximum conductance of 220 pS. In negatively charged bilayers (70% phosphatidylserine/30% phosphatidylethanolamine), the conductance is, at a given K+ concentration, higher than in neutral bilayers. This effect of negative surface charge is increasingly pronounced at lower ionic strength. The maximum conductance at high K+ approaches 220 pS in negative bilayers, and the channel's ionic selectivity is unaffected by lipid charge. The divalent channel blocker " bisQ11 " causes discrete blocking events in both neutral and negatively charged bilayers; the apparent rate constant of blocking is sensitive to surface charge, while the unblocking rate is largely unaffected. Bilayers containing a positively charged phosphatidylcholine analogue led to K+ conductances lower than those seen in neutral bilayers. The results are consistent with a simple mechanism in which the local K+ concentration sensed by the channel's entryway is determined by both the bulk K+ concentration and the bulk lipid surface potential, as given by the Gouy-Chapman model of the electrified interface. To be described by this approach, the channel's entryway must be assumed to be located 1-2 nm away from the lipid surface, on both sides of the membrane.     

Effects of membrane surface charge and calcium on the gating of rat brain sodium channels in planar bilayers [published erratum appears in J Gen Physiol 1989 Apr;93(4):following 760]

The voltage-dependent gating of single, batrachotoxin-activated Na channels from rat brain was studied in planar lipid bilayers composed of negatively charged or neutral phospholipids. The relationship between the probability of finding the Na channel in the open state and the membrane potential (Po vs. Vm) was determined in symmetrical NaCl, both in the absence of free Ca2+ and after the addition of Ca2+ to the extracellular side of the channel, the intracellular side, or both. In the absence of Ca2+, neither the midpoint (V0.5) of the Po vs. Vm relation, nor the steepness of the gating curve, was affected by the charge on the bilayer lipid. The addition of 7.5 mM Ca2+ to the external side caused a depolarizing shift in V0.5. This depolarizing shift was approximately 17 mV in neutral bilayers and approximately 25 mV in negatively charged bilayers. The addition of the same concentration of Ca2+ to only the intracellular side caused hyperpolarizing shifts in V0.5 of approximately 7 mV (neutral bilayers) and approximately 14 mV (negatively charged bilayers). The symmetrical addition of Ca2+ caused a small depolarizing shift in Po vs. Vm. We conclude that: (a) the Na channel protein possesses negatively charged groups on both its inner and outer surfaces. Charges on both surfaces affect channel gating but those on the outer surface exert a stronger influence. (b) Negative surface charges on the membrane phospholipid are close enough to the channel's gating machinery to substantially affect its operation. Charges on the inner and outer surfaces of the membrane lipid affect gating symmetrically. (c) Effects on steady-state Na channel activation are consistent with a simple superposition of contributions to the local electrostatic potential from charges on the channel protein and the membrane lipid.     

Structural requirements for charged lipid molecules to directly increase or suppress K+ channel activity in smooth muscle cells. Effects of fatty acids, lysophosphatidate, acyl coenzyme A and sphingosine

We determined the structural features necessary for fatty acids to exert their action on K+ channels of gastric smooth muscle cells. Examination of the effects of a variety of synthetic and naturally occurring lipid compounds on K+ channel activity in cell-attached and excised membrane patches revealed that negatively charged analogs of medium to long chain fatty acids (but not short chain analogs) as well as certain other negatively charged lipids activate the channels. In contrast, positively charged, medium to long chain analogs suppress activity, and neutral analogs are without effect. The key requirements for effective compounds seem to be a sufficiently hydrophobic domain and the presence of a charged group. Furthermore, those negatively charged compounds unable to "flip" across the bilayer are effective only when applied at the cytosolic surface of the membrane, suggesting that the site of fatty acid action is also located there. Finally, because some of the effective compounds, for example, the fatty acids themselves, lysophosphatidate, acyl Coenzyme A, and sphingosine, are naturally occurring substances and can be liberated by agonist- activated or metabolic enzymes, they may act as second messengers targeting ion channels.     

Optical measurement of aqueous potassium concentration by a hydrophobic indicator in lipid vesicles

An assay was developed for K+ in aqueous solution at neutral pH. The method was based on the change in optical absorbance of the hydrophobic indicator 7-(n-decyl)-2-methyl-4-(3',5'-dichlorophen-4'-one)indonaphthl++ +-1-ol (MEDPIN) in phospholipid vesicles. Formation of a ternary complex between a valinomycin-K+ pair and the anionic form of MEDPIN in the bilayer resulted in an absorption band at 584 nm. K+ concentration was determined by monitoring the MEDPIN absorbance at 584 nm and MEDPIN quenching of lissamine rhodamine B sulfonylphosphatidylethanolamine (L-RhB-PE) fluorescence by an energy-transfer mechanism. Both the fluorescence intensity and lifetime of L-RhB-PE decreased by more than 25% upon addition of 50 mM K+. Kinetic studies using stopped-flow photometry showed a single-exponential reaction of MEDPIN and valinomycin in vesicles with aqueous K+ (maximum rate 1.7 s-1) that was dependent upon [valinomycin] and [K+]. The lipid surface charge was shown to influence the ratio of anionic to neutral MEDPIN at constant pH, and to alter the sensitivity of MEDPIN absorbance to aqueous [K+]. A 1:20 neutral/negative lipid mole ratio was optimal for K+ detection at pH 7.4. Spectroscopic and kinetic data suggest that the optical response of MEDPIN to K+ involves the formation of a ternary complex between K+, valinomycin and MEDPIN.     

Electrokinetic Properties of the Sarcoplasmic Reticulum Membrane Obtained from Reconstitution Studies

Electrophoretic mobility data of SR vesicles reconstituted with uncharged and two mixtures of charged and uncharged lipids (Brethes, D., Dulon, D., Johannin, G., Arrio, B., Gulik-Krzywicki, T., Chevallier, J. 1986. Study of the electrokinetic properties of reconstituted sarcoplasmic reticulum vesicles. Arch. Biochem. Biophys. 246:355–356) were analyzed in terms of four models of the membrane-water interface: (I) a smooth, negatively charged surface; (II) a negatively charged surface of lipid bilayer covered with an electrically neutral surface frictional layer; (III) an electrically neutral lipid bilayer covered with a neutral frictional layer containing a sheet of negative charge at some distance above the surface of the bilayer; (IV) an electrically neutral lipid bilayer covered with a homogeneously charged frictional layer. The electrophoretic mobility was predicted from the numerical integration of Poisson-Boltzmann and Navier-Stokes equations. Experimental results were consistent only with predictions based on Model-III with charged sheet about 4 nm above the bilayer and frictional layer about 10 nm thick. Assuming that the charge of the SR membrane is solely due to that on Ca⁺⁺-ATPase pumps, the dominant SR protein, the mobility data of SR and reconstituted SR vesicles are consistent with 12 electron charges/ATPase. This value compares well to the net charge of the cytoplasmic portion of ATPase estimated from the amino acid sequence (-11e). The position of the charged sheet suggests that the charge on the ATPase is concentrated in the middle of the cytoplasmic portion. The frictional layer of SR can be also assigned to the cytoplasmic portion of Ca⁺⁺-ATPase. The layer has been characterized with hydrodynamic shielding length of 1.1 nm. Its thickness is comparable to the height of the cytoplasmic portion of Ca⁺⁺-ATPase. Received: 15 June 1998/Revised: 8 October 1998     

Membrane surface-charge titration probed by gramicidin A channel conductance.

We manipulate lipid bilayer surface charge and gauge its influence on gramicidin A channel conductance by two strategies: titration of the lipid charge through bulk solution pH and dilution of a charged lipid by neutral. Using diphytanoyl phosphatidylserine (PS) bilayers with CsCl aqueous solutions, we show that the effects of lipid charge titration on channel conductance are masked 1) by conductance saturation with Cs+ ions in the neutral pH range and 2) by increased proton concentration when the bathing solution pH is less than 3. A smeared charge model permits us to separate different contributions to the channel conductance and to introduce a new method for "bilayer pKa" determination. We use the Gouy-Chapman expression for the charged surface potential to obtain equilibria of protons and cations with lipid charges. To calculate cation concentration at the channel mouth, we compare different models for the ion distribution, exact and linearized forms of the planar Poisson-Boltzmann equation, as well as the construction of a "Gibbs dividing surface" between salt bath and charged membrane. All approximations yield the intrinsic pKain of PS lipid in 0.1 M CsCl to be in the range 2.5-3.0. By diluting PS surface charge at a fixed pH with admixed neutral diphytanoyl phosphatidylcholine (PC), we obtain a conductance decrease in magnitude greater than expected from the electrostatic model. This observation is in accord with the different conductance saturation values for PS and PC lipids reported earlier (, Biochim. Biophys. Acta. 552:369-378) and verified in the present work for solvent-free membranes. In addition to electrostatic effects of surface charge, gramicidin A channel conductance is also influenced by lipid-dependent structural factors.     

Surface potential determination in planar lipid bilayers: A simplification of the conductance-ratio method

One of the methods available for the measurement of surface potentials of planar lipid bilayers uses the conductance ratio between a charged and a neutral bilayer doped with ionophores to calculate the surface potential of the charged bilayer. We have devised a simplification of that method which does not require the use of an electrically neutral bilayer as control. The conductance of the charged bilayer is measured before and after the addition of divalent cations (Ba²⁺) to the bathing solution. Ba²⁺ ions screen fixed surface charges, decreasing the surface potential. If the membrane is negatively charged the screening has the effect of decreasing the membrane conductance to cations. The resulting conductance ratio is used to calculate the surface potential change, which is fed into an iterative computer program. The program generates pairs of surface potential values and calculates the surface charge density for the two conditions. Since the surface charge density remains constant during this procedure, there is only one pair of surface potentials that satisfies the condition of constant charge density.Applying this method to experimental data from McLaughlin et al. [McLaughlin, S.G.A., Szabo, G. and Eisenman, G., Divalent ions and the surface potential of charged phospholipid membranes, J. Gen. Physiol., 58 (1971) 667–687.] we have found very similar results. We have also successfully used this method to determine the effect of palmitic acid on the surface potential of asolectin membranes.     

Molecular dynamics simulations of charged and neutral lipid bilayers: treatment of electrostatic interactions

Molecular dynamics (MD) simulations complement experimental methods in studies of the structure and dynamics of lipid bilayers. The choice of algorithms employed in this computational method represents a trade-off between the accuracy and real calculation time. The largest portion of the simulation time is devoted to calculation of long-range electrostatic interactions. To speed-up evaluation of these interactions, various approximations have been used. The most common ones are the truncation of long-range interactions with the use of cut-offs, and the particle-mesh Ewald (PME) method. In this study, several multi-nanosecond cut-off and PME simulations were performed to establish the influence of the simulation protocol on the bilayer properties. Two bilayers were used. One consisted of neutral phosphatidylcholine molecules. The other was a mixed lipid bilayer consisting of neutral phosphatidylethanolamine and negatively charged phosphatidylglycerol molecules. The study shows that the cut-off simulation of a bilayer containing charge molecules generates artefacts; in particular the mobility and order of the charged molecules are vastly different from those determined experimentally. In the PME simulation, the bilayer properties are in general agreement with experimental data. The cut-off simulation of bilayers containing only uncharged molecules does not generate artefacts, nevertheless, the PME simulation gives generally better agreement with experimental data.     

Interaction of electrically charged lipid monolayers with malate dehydrogenase.

Malate dehydrogenase was adsorbed onto monomolecular lipid films, using a multicompartment trough. The quantity of adsorbed protein and its enzymatic activity were studied with monolayers of various electrical charge densities and subphases of various electrolyte compositions. A closely packed layer of enzyme molecules was adsorbed onto negatively charged films, whereas considerably less protein was adsorbed onto neutral and positively charged monolayers. Electrolytes reduce the quantity of adsorbed protein. The adsorption was found to be irreversible even at high ionic strength. When adsorbed to uncharged lipid films the enzyme is nearly inactive, whereas negatively charged lipid headgroups enhance the specific activity of the enzyme.     

Interaction of electrically charged lipid monolayers with malate dehydrogenase

Malate dehydrogenase was adsorbed onto monomolecular lipid films, using a multicompartment trough. The quantity of adsorbed protein and its enzymatic activity were studied with monolayers of various electrical charge densities and subphases of various electrolyte compositions. A closely packed layer of enzyme molecules was adsorbed onto negatively charged films, whereas considerably less protein was adsorbed onto neutral and positively charged monolayers. Electrolytes reduce the quantity of adsorbed protein. The adsorption was found to be irreversible even at high ionic strength. When adsorbed to uncharged lipid films the enzyme is nearly inactive, whereas negatively charged lipid headgroups enhance the specific activity of the enzyme.     

Adhesion of Positively Charged Liposomes to Mucosal Tissues

Abstract

A series of positively charged phospholipid and cholesterol derivatives was synthesized and evaluated as membrane components for liposomes. Small unilamellar liposomes containing up to 40 mole% of the synthetic lipids were prepared by sonication. Selected liposome preparations containing these synthetic lipid materials were found to be noncytotoxic in vitro by using a cell growth inhibition assay, whereas liposomes containing more classic positively charged components (stearylamine and cetyltrimethylammonium bromide) showed considerable cytotoxicity. Using an unanesthetized rabbit eye model, we have found that inclusion of the positively charged lipid derivatives into the liposomes significantly enhanced the ocular retention compared to neutral or negatively charged liposomes, presumably by molecular association with poly anionic corneal and conjunctival surface mucoglycoproteins. the increased retention was dependent on charge density and rigidity of the lipid bilayer. An assay for primary amino groups in these liposomes suggested that the distribution of the charged molecules between the inner and outer leaflets of the bilayer could be manipulated by lipid composition. Studies of liposomes containing cholesteryl esters of amino acids of various carbon chain lengths indicated that the charged amino groups need to extend from the surface of the lipid bilayers for better adhesion and retention. the ocular surface was saturable with respect to applied liposomes, which were cleared slowly from the eye with a half-time of clearance of about 2 hr. these data suggest a specific adhesion of the cationic liposomes to the surface of mucosal tissues.     

Electric field-driven transformations of a supported model biological membrane--an electrochemical and neutron reflectivity study

A mixed bilayer of cholesterol and dimyristoylphosphatidylcholine has been formed on a gold-coated block of quartz by fusion of small unilamellar vesicles. The formation of this bilayer lipid membrane on a conductive surface allowed us to study the influence of the support's surface charge on the structure and hydration of the bilayer lipid membrane. We have employed electrochemical measurements and the specular reflection of neutrons to measure the thickness and water content in the bilayer lipid membrane as a function of the charge on the support's surface. When the surface charge density is close to zero, the lipid vesicles fuse directly on the surface to form a bilayer with a small number of defects and hence small water content. When the support's surface is negatively charged the film swells and incorporates water. When the charge density is more negative than −8 μC cm⁻², the bilayer starts to detach from the metal surface. However, it remains in a close proximity to the metal electrode, being suspended on a thin cushion of the electrolyte. The field-driven transformations of the bilayer lead to significant changes in the film thicknesses. At charge densities more negative than −20 μC cm⁻², the bilayer is ~37 Å thick and this number is comparable to the thickness determined for hydrated multilayers of dimyristoylphosphatidylcholine from x-ray diffraction experiments. The thickness of the bilayer decreases at smaller charge densities to become equal to ~26 Å at zero charge. This result indicates that the tilt of the acyl chains with respect to the bilayer normal changes from ~35° to 59° by moving from high negative charges (and potentials) to zero charge on the metal.     

Location and ion-binding of membrane-associated valinomycin, a proton nuclear magnetic resonance study

Valinomycin, incorporated in small unilamellar vesicles of perdeuterated dimyristoylphosphatidylcholine, reveals several well-resolved 1H-NMR resonances. These resonances were used to examine the location, orientation and ion-binding of membrane-bound valinomycin. The order of affinity of membrane-bound valinomycin for cations is Rb+ greater than K+ greater than Cs+ greater than Ba2+, and binding is sensitive to surface change. The exchange between bound and free forms is fast on the NMR time scale. The intrinsic binding constants, extrapolated to zero anion concentration, are similar to those determined in aqueous solution. Rb+ and K+ show 1:1 binding to valinomycin, whereas the stoichiometry of Cs+ and Ba2+ is not certain. Paramagnetic chemical shift reagents and nitroxide spin label relaxation probes were used to study the location and orientation of valinomycin in the membrane. Despite relatively fast exchange of bound cations, the time average location of the cation-free form of valinomycin is deep within the bilayer under the conditions of these experiments. Upon complexation to K+, valinomycin moves closer to the interfacial region.     

Optimization of the antimicrobial activity of magainin peptides by modification of charge

Investigation of magainin II amide analogs with cationic charges ranging between +3 and +7 showed that enhancement of the peptide charge up to a threshold value of +5 and conservation of appropriate hydrophobic properties optimized the antimicrobial activity and selectivity. High selectivity was the result of both enhanced antimicrobial and reduced hemolytic activity. Charge increase beyond +5 with retention of other structural motifs led to a dramatic increase of hemolytic activity and loss of antimicrobial selectivity. Selectivity could be restored by reduction of the hydrophobicity of the hydrophobic helix surface (H(hd)), a structural parameter not previously considered to modulate activity. Dye release experiments with lipid vesicles revealed that the potential of peptide charge to modulate membrane activity is limited: on highly negatively charged 1-palmitoyl-2-oleoylphosphatidyl-DL-glycerol bilayers, reinforcement of electrostatic interactions had an activity-reducing effect. On neutral 1-palmitoyl-2-oleoylphosphatidylcholine bilayers, the high activity was determined by H(hd). H(hd) values above a certain threshold led to effective permeabilization of all lipid systems and even compensated for the activity-reducing effect of charge increase on highly negatively charged membranes.     

Penetratin-membrane association: W48/R52/W56 shield the peptide from the aqueous phase

Using molecular dynamics simulations, we studied the mode of association of the cell-penetrating peptide penetratin with both a neutral and a charged bilayer. The results show that the initial peptide-lipid association is a fast process driven by electrostatic interactions. The homogeneous distribution of positively charged residues along the axis of the helical peptide, and especially residues K46, R53, and K57, contribute to the association of the peptide with lipids. The bilayer enhances the stability of the penetratin helix. Oriented parallel to the lipid-water interface, the subsequent insertion of the peptide through the bilayer headgroups is significantly slower. The presence of negatively charged lipids considerably enhances peptide binding. Lateral side-chain motion creates an opening for the helix into the hydrophobic core of the membrane. The peptide aromatic residues form a pi-stacking cluster through W48/R52/W56 and F49/R53, protecting the peptide from the water phase. Interaction with the penetratin peptide has only limited effect on the overall membrane structure, as it affects mainly the conformation of the lipids which interact directly with the peptide. Charge matching locally increases the concentration of negatively charged lipids, lateral lipid diffusion locally decreases. Lipid disorder increases, through decreased order parameters of the lipids interacting with the penetratin side chains. Penetratin molecules at the membrane surface do not seem to aggregate.     

Effect of phosphatidylserine on unitary conductance and Ba2+ block of the BK Ca2+-activated K+ channel: re-examination of the surface charge hypothesis

Incorporation of BK Ca2+-activated K+ channels into planar bilayers composed of negatively charged phospholipids such as phosphatidylserine (PS) or phosphatidylinositol (PI) results in a large enhancement of unitary conductance (gch) in comparison to BK channels in bilayers formed from the neutral zwitterionic lipid, phospatidylethanolamine (PE). Enhancement of gch by PS or PI is inversely dependent on KCl concentration, decreasing from 70% at 10 mM KCl to 8% at 1,000 mM KCl. This effect was explained previously by a surface charge hypothesis (Moczydlowski, E., O. Alvarez, C. Vergara, and R. Latorre. 1985. J. Membr. Biol. 83:273-282), which attributed the conductance enhancement to an increase in local K+ concentration near the entryways of the channel. To test this hypothesis, we measured the kinetics of block by external and internal Ba2+, a divalent cation that is expected to respond strongly to changes in surface electrostatics. We observed little or no effect of PS on discrete blocking kinetics by external and internal Ba2+ at 100 mM KCl and only a small enhancement of discrete and fast block by external Ba2+ in PS-containing membranes at 20 mM KCl. Model calculations of effective surface potential sensed by the K+ conduction and Ba2+-blocking reactions using the Gouy-Chapman-Stern theory of lipid surface charge do not lend support to a simple electrostatic mechanism that predicts valence-dependent increase of local cation concentration. The results imply that the conduction pore of the BK channel is electrostatically insulated from the lipid surface, presumably by a lateral distance of separation (>20 A) from the lipid head groups. The lack of effect of PS on apparent association and dissociation rates of Ba2+ suggest that lipid modulation of K+ conductance is preferentially coupled through conformational changes of the selectivity filter region that determine the high K+ flux rate of this channel relative to other cations. We discuss possible mechanisms for the effect of anionic lipids in the context of specific molecular interactions of phospholipids documented for the KcsA bacterial potassium channel and general membrane physical properties proposed to regulate membrane protein conformation via energetics of bilayer stress.     

Surface potential determination in planar lipid bilayers: a simplification of the conductance-ratio method

One of the methods available for the measurement of surface potentials of planar lipid bilayers uses the conductance ratio between a charged and a neutral bilayer doped with ionophores to calculate the surface potential of the charged bilayer. We have devised a simplification of that method which does not require the use of an electrically neutral bilayer as control. The conductance of the charged bilayer is measured before and after the addition of divalent cations (Ba(2+)) to the bathing solution. Ba(2+) ions screen fixed surface charges, decreasing the surface potential. If the membrane is negatively charged the screening has the effect of decreasing the membrane conductance to cations. The resulting conductance ratio is used to calculate the surface potential change, which is fed into an iterative computer program. The program generates pairs of surface potential values and calculates the surface charge density for the two conditions. Since the surface charge density remains constant during this procedure, there is only one pair of surface potentials that satisfies the condition of constant charge density. Applying this method to experimental data from McLaughlin et al. [McLaughlin, S.G.A., Szabo, G. and Eisenman, G., Divalent ions and the surface potential of charged phospholipid membranes, J. Gen. Physiol., 58 (1971) 667-687.] we have found very similar results. We have also successfully used this method to determine the effect of palmitic acid on the surface potential of asolectin membranes.     

Valinomycin and its interaction with ions in organic solvents, detergents, and lipids studied by Fourier transform IR spectroscopy.

The structure of valinomycin in a range of organic solvents of varying polarity and in detergent and lipid dispersions has been studied by Fourier transform ir spectroscopy. In solvents of low polarity such as chloroform, ir spectra of valinomycin are fully consistent with the bracelet structure proposed on the basis of nmr spectroscopy, showing a single narrow amide I component attributable to the presence of beta-turns and a single band arising from nonhydrogen-bonded ester C = O groups. K+ complexation results in a downward shift in the amide I band frequency, indicating an increase in the strength of the amide hydrogen bonds, along with a shift to lower frequencies of the ester C = O absorption due to a reduction in electron density in these bonds upon complexation. Identical results were obtained with NH4+, a finding not previously reported. In solvents of both medium (CHCl3/DMSO 3:1) and high (pure DMSO) polarity, we find evidence of significant disruption of the internal hydrogen-bonding network of the peptide and the appearance of a band suggesting the presence of free amide C = O groups. In such solvents, complexation with K+ and NH4+ was not observed. The structure of valinomycin in detergent micelles resembles that in nonpolar organic solvents. However, changes were found in the amide I and ester carbonyl maxima as 2H2O penetrated the micelle which suggest significant interaction between the solvent and peptide. Complexation with K+ was reduced in cationic detergent micelles as a result of a decrease in the effective K+ concentration due to charge repulsion at the micelle surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

Binding of cationic pentapeptides with modified side chain lengths to negatively charged lipid membranes: Complex interplay of electrostatic and hydrophobic interactions

Basic amino acids play a key role in the binding of membrane associated proteins to negatively charged membranes. However, side chains of basic amino acids like lysine do not only provide a positive charge, but also a flexible hydrocarbon spacer that enables hydrophobic interactions. We studied the influence of hydrophobic contributions to the binding by varying the side chain length of pentapeptides with ammonium groups starting with lysine to lysine analogs with shorter side chains, namely ornithine (Orn), α,γ-diaminobutyric acid (Dab) and α, β-diaminopropionic acid (Dap). The binding to negatively charged phosphatidylglycerol (PG) membranes was investigated by calorimetry, FT-infrared spectroscopy (FT-IR) and monolayer techniques. The binding was influenced by counteracting and sometimes compensating contributions. The influence of the bound peptides on the lipid phase behavior depends on the length of the peptide side chains. Isothermal titration calorimetry (ITC) experiments showed exothermic and endothermic effects compensating to a different extent as a function of side chain length. The increase in lipid phase transition temperature was more significant for peptides with shorter side chains. FTIR-spectroscopy revealed changes in hydration of the lipid bilayer interface after peptide binding. Using monolayer techniques, the contributions of electrostatic and hydrophobic effects could clearly be observed. Peptides with short side chains induced a pronounced decrease in surface pressure of PG monolayers whereas peptides with additional hydrophobic interactions decreased the surface pressure much less or even lead to an increase, indicating insertion of the hydrophobic part of the side chain into the lipid monolayer.