Effects of joint unloading and reloading on human cartilage morphology and function, muscle cross-sectional areas, and bone density - a quantitative case report

Recent studies have shown that thinning of human cartilage occurs with unloading, but no data are available on the effect of remobilization (after immobilization) on knee joint cartilage status in humans. We examined a 36-year-old patient after 6 weeks of unilateral immobilization. Knee joint cartilage morphology (patella and tibia), patellar cartilage deformation, and thigh muscle cross-sectional areas were assessed with quantitative MR imaging and bone density with peripheral quantitative computed tomography (pQCT) during 24 months of remobilization. The immobilized limb displayed lower muscle cross-sectional areas (MCSA) of the knee extensors (-36%), lower bone density of the femur and tibia (-12/-6%), lower patellar cartilage thickness (-14%), but no side differences of tibial cartilage thickness. During remobilization, side differences decreased to -4% for knee extensor MCSAs, to -6%/-3% for femoral and tibial BMD, and to -8% for patellar cartilage thickness. No change was observed in tibial cartilage. Patellar deformation decreased from 9% to 4% after 15 months. In conclusion, we observed substantial changes of thigh MCSAs, but little (patella) to no (tibia) change in cartilage thickness during remobilization. These preliminary results indicate that human cartilage macro-morphology may be less adaptive to variations of the mechanical loading than muscle and bone.     

Effect of low-power helium-neon laser irradiation on 13-week immobilized articular cartilage of rabbits

Influence of low-power (632.8 nm, Helium-Neon, 13 J/cm2, three times a week) laser on 13-week immobilized articular cartilage was examined with rabbits knee model. Number of chondrocytes and depth of articular cartilage of experimental group were significantly higher than those of sham irradiated group. Surface morphology of sham-irradiated group had rough prominences, fibrillation and lacunae but surface morphology of experimental group had more similarities to control group than to sham irradiated group. There were marked differences between ultrastructure features of control group and experimental group in comparison with sham irradiated group. Low-power Helium-Neon laser irradiation on 13-week immobilized knee joints of rabbits neutrilized adverse effects of immobilization on articular cartilage.     

Passive resistance of the human knee: The effect of immobilization

The effects of immobilization on both the circumferential dimensions of the lower limb, and the passive resistance of the knee to sinusoidal motion in the flexion-extension plane, were studied in patients immobilized after tibial fractures or ligamentous injuries of the knee. Immobilization resulted in a decrease of circumferential dimensions of the lower limb, indicating atrophy of thigh and calf musculature. The equilibrium angle of the knee, i.e. the angle at which the net passive moment equals zero, approached the angle of the knee during immobilization. At knee angles of 60° (the maximal angle imposed on the immobilized knee) and 45°, the resistance was increased, and at angles of 30° and 15°, the resistance was decreased. The passive resistances at ± 22.5, 15 and 7.5° relative to the equilibrium angle were all increased. A simple model, taking into account changes in the length of muscles at the anterior and posterior side of the knee, explains changes in passive resistance. The duration of immobilization for patients with ligamentous injuries of the knee was less than 50% of that for patients with tibial fractures, whose ankle joint was not immobilized, both resulted in a smaller muscular atrophy for patients with ligamentous injuries. Differences in passive resistance between unaffected and immobilized legs were the same in both groups of patients. Changes in passive resistance in the immobilized leg for those with ligamentous injury are probably not the effect of immobilization alone but the combined effect of immobilization and ligamentous lesions.     

Precision MRI-based joint surface and cartilage density analysis of the knee joint using rapid water-excitation sequence and semi-automatic segmentation algorithm]

The aim of this study was to analyse the precision of three-dimensional joint surface and cartilage thickness measurements in the knee, using a fast, high-resolution water-excitation sequence and a semiautomated segmentation algorithm. The knee joint of 8 healthy volunteers, aged 22 to 29 years, were examined at a resolution of 1.5 mm x 0.31 mm x 0.31 mm, with four sagittal data sets being acquired after repositioning the joint. After semiautomated segmentation with a B-spline Snake algorithm and 3D reconstruction of the patellar, femoral and tibial cartilages, the joint surface areas (triangulation), cartilage volume, and mean and maximum thickness (Euclidean distance transformation) were analysed, independently of the orientation of the sections. The precision (CV%) for the surface areas was 2.1 to 6.6%. The mean cartilage thickness and cartilage volume showed coefficients of 1.9 to 3.5% (except for the femoral condyles), the value for the medial femoral condyle being 9.1%, and for the lateral condyle 6.5%. For maximum thickness, coefficients of between 2.6 and 5.9% were found. In the present study we investigate for the first time the precision of MRI-based joint surface area measurements in the knee, and of cartilage thickness analyses in the femur. Using a selective water-excitation sequence, the acquisition time can be reduced by more than 50%. The poorer precision in the femoral condyles can be attributed to partial volume effects that occur at the edges of the joint surfaces with a sagittal image protocol. Since MRI is non-invasive, it is highly suitable for examination of healthy subjects (generation of individual finite element models, analysis of functional adaptation to mechanical stimulation, measurement of cartilage deformation in vivo) and as a diagnostic tool for follow-up, indication for therapy, and objective evaluation of new therapeutic agents in osteoarthritis.     

In vivo patellar tracking and patellofemoral cartilage contacts during dynamic stair ascending

The knowledge of normal patellar tracking is essential for understanding the knee joint function and for diagnosis of patellar instabilities. This paper investigated the patellar tracking and patellofemoral joint contact locations during a stair ascending activity using a validated dual-fluoroscopic imaging system. The results showed that the patellar flexion angle decreased from 41.9° to 7.5° with knee extension during stair ascending. During first 80% of the activity, the patella shifted medially about 3.9mm and then slightly shifted laterally during the last 20% of the ascending activity. Anterior translation of 13mm of the patella was measured at the early 80% of the activity and the patella slightly moved posteriorly by about 2mm at the last 20% of the activity. The path of cartilage contact points was slightly lateral on the cartilage surfaces of patella and femur. On the patellar cartilage surface, the cartilage contact locations were about 2mm laterally from heel strike to 60% of the stair ascending activity and moved laterally and reached 5.3mm at full extension. However, the cartilage contact locations were relatively constant on the femoral cartilage surface (～5mm lateral). The patellar tracking pattern was consistent with the patellofemoral cartilage contact location pattern. These data could provide baseline knowledge for understanding of normal physiology of the patellofemoral joint and can be used as a reference for clinical evaluation of patellofemoral disorders.     

A comparison of the influence of global functional loads vs. local contact anatomy on articular cartilage thickness at the knee

Cartilage contact geometry, along with joint loading, can play an important role in determining local articular cartilage tissue stress. Thus individual variations in cartilage thickness can be associated with both individual variations in joint loading associated with activities of daily living as well as individual differences in the anatomy of the contacting surfaces of the joint. The purpose of this study was to isolate the relationship between cartilage thickness predicted by individual variations in contact surface geometry based on the radii of the femur and tibia vs. cartilage thickness predicted by individual variations in joint loading. Knee magnetic resonance (MR) images and the peak knee adduction moments during walking were obtained from 11 young healthy male subjects (age 30.5+/-5.1 years). The cartilage thicknesses and surface radii of the femoral and tibial cartilage were measured in the weight-bearing regions of the medial and lateral compartments of three-dimensional models from the MR images. The ratio of contact pressure between the medial and lateral compartments was calculated from the radii of tibiofemoral contact surface geometries. The results showed that the medial to lateral pressure ratios were not correlated with the medial to lateral cartilage thickness ratios. However, in general, pressure was higher in the lateral than medial compartments and cartilage was thicker in the lateral than medial compartments. The peak knee adduction moment showed a significant positive linear correlation with medial to lateral thickness ratio in both femur (R(2)=0.43,P<0.01) and tibia (R(2)=0.32,P<0.01). The results of this study suggest that the dynamics of walking is an important factor to describe individual differences in cartilage thickness for normal subjects.     

Quantitation of articular surface topography and cartilage thickness in knee joints using stereophotogrammetry

An analytical stereophotogrammetry (SPG) technique has been developed based upon some of the pioneering work of Selvik [Ph.D. thesis, University of Lund, Sweden (1974)] and Huiskes and coworkers [J. Biomechanics 18, 559-570 (1985)], and represents a fundamental step in the construction of biomechanical models of diarthrodial joints. Using this technique, the precise three-dimensional topography of the cartilage surfaces of various diarthrodial joints has been obtained. The system presented in this paper delivers an accuracy of 90 microns in the least favorable conditions with 95% coverage using the same calibration method as Huiskes et al. (1985). In addition, a method has been developed, using SPG, to quantitatively map the cartilage thickness over the entire articular surface of a joint with a precision of 134 microns (95% coverage). In the present study, our SPG system has been used to quantify the topography, including surface area, of the articular surfaces of the patella, distal femur, tibial plateau, and menisci of the human knee. Furthermore, examples of cartilage thickness maps and corresponding thickness data including coefficient of variation, minimum, maximum, and mean cartilage thickness are also provided for the cartilage surfaces of the knee. These maps illustrate significant variations over the joint surfaces which are important in the determination of the stresses and strains within the cartilage during diarthrodial joint function. In addition, these cartilage surface topographies and thickness data are essential for the development of anatomically accurate finite element models of diarthrodial joints.(ABSTRACT TRUNCATED AT 250 WORDS)     

Articular cartilage in the knee joint of the African elephant, Loxodonta africana, Blumenbach 1797

Knee joints of one adult and three juvenile African elephants were dissected. The specific features of the articular cartilage with particular reference to matrix components were studied by light and electron microscopy and immunohistochemistry. The elephant knee joint cartilage contains an unusually low concentration of proteoglycans resulting in rather eosinophilic staining properties of the matrix. The very thick collagen fibers of the cartilage possibly represent collagen I. Except for the different thickness of cartilage at the weight-bearing surfaces of femur (approximately 6.7 mm) and tibia (approximately 11.2 mm) in juvenile elephants, light and electron microscopy did not reveal distinct topographical differences in cartilage structure, perhaps because of the high congruency of the articulating surfaces and resulting uniform load distribution in the knee. The number of cell profiles per section area of both femoral (approximately 950 cell profiles/mm(2)) and tibial cartilage (approximately 898 cell profiles/mm(2)) was low, indicating excessive matrix production by the chondrocytes during cartilage development. These unique properties could be a result of the enormous compressive load resting on the elephant knee. Maintenance of the equilibrium between biological function and resistance to compression seems to be crucial in the elephant knee joint cartilage. Any disturbance that interferes with this equilibrium appears to lead to arthrotic alterations, as particularly seen in captive elephants.     

Immobilization of immunoglobulins on silica surfaces. Kinetics of immobilization and influence of ionic strength.

The kinetics of, and the influence of ionic strength on, the immobilization of rabbit immunoglobulin G (IgG) on different types of well-characterized silica surfaces were investigated. Adsorptive immobilization was compared with covalent attachment via thiol-disulphide exchange reactions. The amount of immobilized IgG on five different types of silica surfaces as a function of IgG concentration, at two different ionic strengths, was determined. The IgG-solid-surface interaction involved different types of interaction forces, depending on the surface chemistry of the solid surface. The solid-surface chemistry is an important parameter determining the immobilized amount of IgG. When conditions for covalent attachment of IgG to the surfaces were fulfilled, the IgG showed high affinity and the immobilized amount of IgG showed a fast saturation. Changes in ionic strength showed no significant influence on the kinetics of immobilization on these surfaces. The amount of covalently attached IgG was partially ionic-strength-dependent, indicating that adsorptive interactions were involved. The results are of fundamental interest for the development of new immunosensors based on surface-concentration-measuring devices.     

Atomic force spectroscopy-based study of antibody pesticide interactions for characterization of immunosensor surface

Development of immunobiosensor detector surfaces involves the immobilization of active antibodies on the capture surface without any significant loss of antigen binding activity. An atomic force microscope (AFM) was used to directly evaluate specific interactions between pesticides and antibodies on a biosensor surface. Oriented immobilization of antibodies against two herbicide molecules 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine, on gold, was carried out to create the active immunobiosensor surfaces. The adhesive forces between immobilized antibodies and their respective antigens were measured by force spectroscopy using hapten-carrier protein functionalized AFM cantilevers. Relative functional affinity (avidity) measurements of the antibodies carried out prior to immobilization, well correlated with subsequent AFM force measurement observations. Analysis showed that immobilization had not compromised the reactivity of the surface immobilized antibody molecules for antigen nor was there any change in their relative quality with respect to each other. The utility of the immunoreactive surface was further confirmed using a Surface Plasmon Resonance (SPR) based detection system. Our study indicates that AFM can be utilized as a convenient immunobiosensing tool for confirming the presence and also assessing the strength of antibody-hapten interactions on biosensor surfaces under development.     

Semiquantitative analysis of rabbit knee articular surfaces based on stereomicroscopic examination of the cartilage

A semiquantitative stereomicroscopic method was devised in order to examine rabbit knee articular surfaces. With the aid of a drawing tube mounted on a stereomicroscope, enlarged pictures (magnification of X 14-19) of ink-stained or SEM specimens of joint surfaces were drawn and the structural details classified. The point-counting method or a computer-coupled analyzer was used to analyze the pictures. The data thus obtained underwent statistical evaluation. The method proved to be very useful for the quantitation of experimentally induced changes on cartilage surfaces.     

Immobilization of the purple non-sulfur bacterium Rhodobacter sphaeroides on glass surfaces

Summary A method for improving the adsorption of bacteria on glass surfaces was developed. The modification of a glass surface by LS-2480 greatly increased the number of bacteria that were immobilized. The conditions for bacteria immobilization on the modified glass surface were optimized.     

A surface roughness comparison of cartilage in different types of synovial joints

The naturally occurring structure of articular cartilage has proven to be an effective means for the facilitation of motion and load support in equine and other animal joints. For this reason, cartilage has been extensively studied for many years. Although the roughness of cartilage has been determined from atomic force microscopy (AFM) and other methods in multiple studies, a comparison of roughness to joint function has not be completed. It is hypothesized that various joint types with different motions and regimes of lubrication have altered demands on the articular surface that may affect cartilage surface properties. Micro- and nanoscale stylus profilometry was performed on the carpal cartilage harvested from 16 equine forelimbs. Eighty cartilage surface samples taken from three different functioning joint types (radiocarpal, midcarpal, and carpometacarpal) were measured by a Veeco Dektak 150 Stylus Surface Profilometer. The average surface roughness measurements were statistically different for each joint. This indicates that the structure of cartilage is adapted to, or worn by, its operating environment. Knowledge of cartilage micro- and nanoscale roughness will assist the future development and design of treatments for intra- articular substances or surfaces to preserve joint integrity and reduce limitations or loss of joint performance.     

Immobilization of immunoglobulins on silica surfaces. Stability.

The development of new immunosensors based on surface-concentration-measuring devices requires a stable and reproducible immobilization of antibodies on well-characterized solid surfaces. We here report on the immobilization of immunoglobulin G (IgG) on chemically modified silica surfaces. Such surfaces may be used in various surface-oriented analytical methods. Reactive groups were introduced to the silica surfaces by chemical-vapour deposition of silane. The surfaces were characterized by ellipsometry, contact-angle measurements and scanning electron microscopy. IgG covalently bound by the use of thiol-disulphide exchange reactions, thereby controlling the maximum number of covalent bonds to the surface, was compared with IgG adsorbed on various silica surfaces. This comparison showed that the covalently bound IgG has a superior stability when the pH was lowered or incubation with detergents, urea or ethylene glycol was carried out. The result was evaluated by ellipsometry, an optical technique that renders possible the quantification of amounts of immobilized IgG. The results outline the possibilities of obtaining a controlled covalent binding of biomolecules to solid surfaces with an optimal stability and biological activity of the immobilized molecules.     

SUMO‐modified bone marrow mesenchymal stem cells promoted the repair of articular cartilage in rats

Articular cartilage damage can lead to joint deformity, pain, and severe dysfunction. However, due to the lack of blood vessels and nerves in articular cartilage, the self‐healing capacity of damaged cartilage is limited. In this study, we overexpressed small ubiquitin‐like modifier (SUMO)1, SUMO2/3, and SUMO1/2/3 in bone marrow mesenchymal stem cells (BMSCs). Then, these cells were inoculated on surfaces of different hardness, and their differentiation into chondrocytes, hypoxic tolerance ability, and inflammatory response was detected. Finally, BMSCs were transplanted into the injured knee joint cavity of the rats, and the repair was evaluated. We found that BMSCs overexpressing SUMO1 were more likely to differentiate into articular cartilage along with the hardness of the surface, while BMSCs overexpressing SUMO2/3 could reduce inflammation response and improve the damaged cartilage microenvironment. In the rat model, BMSCs overexpressing SUMO1/2/3 transplanted on injured articular cartilage surface showed better survival, less inflammatory response, and improved tissue repair capability. In conclusion, BMSCs overexpressing SUMO are more tolerant to hypoxia conditions, and have stronger repair ability for damaged chondrocytes in vitro and for articular cartilage injury model in rats, and are excellent seed cells for repairing articular cartilage.     

Material and functional properties of articular cartilage and patellofemoral contact mechanics in an experimental model of osteoarthritis

The purposes of this study were to determine the in situ functional and material properties of articular cartilage in an experimental model of joint injury, and to quantify the corresponding in situ joint contact mechanics. Experiments were performed in the anterior cruciate ligament (ACL) transected knee of the cat and the corresponding, intact contralateral knee, 16 weeks following intervention. Cartilage thickness, stiffness, effective Young’s modulus, and permeability were measured and derived from six locations of the knee. The total contact area and peak pressures in the patellofemoral joint were obtained in situ using Fuji Pressensor film, and comparisons between experimental and contralateral joint were made for corresponding loading conditions. Total joint contact area and peak pressure were increased and decreased significantly (=0.01), respectively, in the experimental compared to the contralateral joint. Articular cartilage thickness and stiffness were increased and decreased significantly (=0.01), respectively, in the experimental compared to the contralateral joint in the four femoral and patellar test locations. Articular cartilage material properties (effective Young’s modulus and permeability) were the same in the ACL-transected and intact joints. These results demonstrate for the first time the effect of changes in articular cartilage properties on the load transmission across a joint. They further demonstrate a substantial change in the joint contact mechanics within 16 weeks of ACL transection. The results were corroborated by theoretical analysis of the contact mechanics in the intact and ACL-transected knee using biphasic contact analysis and direct input of cartilage properties and joint surface geometry from the experimental animals. We conclude that the joint contact mechanics in the ACL-transected cat change within 16 weeks of experimental intervention.     

抗体固定化方法研究进展

在免疫分析和生物芯片中,抗原-抗体特异性结合被广泛应用,其中抗体的固定化是研发高效诊断和分离工具的关键环节。生物分子工程、材料化学与交联剂化学的进步极大地促进了抗体固定化技术的发展。 抗体可以通过物理吸附、共价偶联和亲和相互作用固定到不同类型的固相表面。 抗体固定化的目标是以一种正确的空间取向将抗体固定到固相表面,在完全保留抗体构象和活性的同时最大化抗原的结合能力,这对固相化抗体的分析性能至关重要。 对固定抗体到固相载体表面的各种最新方法进行了阐述,包括物理吸附法,通过羧基、氨基、巯基、糖基和点击化学的共价结合法以及基于生物亲和作用的固定法,并对固定化抗体的表征方法进行了归纳,最后对抗体固定化方法的发展方向进行了展望。     

Development of a preclinical natural porcine knee simulation model for the tribological assessment of osteochondral grafts in vitro

In order to pre-clinically evaluate the performance and efficacy of novel osteochondral interventions, physiological and clinically relevant whole joint simulation models, capable of reproducing the complex loading and motions experienced in the natural knee environment are required. The aim of this study was to develop a method for the assessment of tribological performance of osteochondral grafts within an in vitro whole natural joint simulation model.The study assessed the effects of osteochondral allograft implantation (existing surgical intervention for the repair of osteochondral defects) on the wear, deformation and damage of the opposing articular surfaces. Tribological performance of osteochondral grafts was compared to the natural joint (negative control), an injury model (focal cartilage defects) and stainless steel pins (positive controls). A recently developed method using an optical profiler (Alicona Infinite Focus G5, Alicona Imaging GmbH, Austria) was used to quantify and characterise the wear, deformation and damage occurring on the opposing articular surfaces. Allografts inserted flush with the cartilage surface had the lowest levels of wear, deformation and damage following the 2 h test; increased levels of wear, deformation and damage were observed when allografts and stainless steel pins were inserted proud of the articular surface. The method developed will be applied in future studies to assess the tribological performance of novel early stage osteochondral interventions prior to in vivo studies, investigate variation in surgical precision and aid in the development of stratified interventions for the patient population.