High-level expression of the mycobacterial porin MspA in Escherichia coli and purification of the recombinant protein

MspA is the prototype of a new family of tetrameric porins and provides the main general diffusion pathway for hydrophilic compounds through the outer membrane of Mycobacterium smegmatis. Structural analysis was hampered by the scarce amount of pure protein. After replacement of the GC-rich codons of the mspA gene by codons optimal for high-level expression in Escherichia coli, the mature MspA protein was overproduced in E. coli. The recombinant MspA (rMspA) monomer (M(r) 20000) was purified by anion exchange and hydrophobic interaction chromatography yielding 2.6 mg pure protein per liter of culture. This exceeded the yield of the native protein 10-fold. Circular dichroism revealed that rMspA is folded in a native-like structure. rMspA assembled partially to the channel-forming tetramer both during expression in E. coli and after purification in vitro. Thus, overexpression in E. coli and chromatographic purification are key steps towards a high resolution structure of MspA.     

MspA provides the main hydrophilic pathway through the cell wall of Mycobacterium smegmatis

MspA is an extremely stable, oligomeric porin from Mycobacterium smegmatis that forms water-filled channels in vitro. Immunogold electron microscopy and an enzyme-linked immunosorbent assay demonstrated that MspA is localized in the cell wall. An mspA deletion mutant did not synthesize detectable amounts of mspA mRNA, as revealed by amplification using mspA-specific primers and reverse-transcribed RNA. Detergent extracts of the DeltamspA mutant exhibited a significantly lower porin activity in lipid bilayer experiments and contained about fourfold less porin than extracts of wild-type M. smegmatis. The chromosome of M. smegmatis encodes three proteins very similar to MspA. Sequence analysis of the purified porin revealed that mspB or mspC or both genes are expressed in the DeltamspA mutant. The properties of this porin, such as single channel conductance, extreme stability against denaturation, molecular mass and composition of 20 kDa subunits, are identical to those of MspA. Deletion of mspA reduced the cell wall permeability towards cephaloridine and glucose nine- and fourfold respectively. These results show that MspA is the main general diffusion pathway for hydrophilic molecules in M. smegmatis and was only partially replaced by fewer porins in the cell wall of the DeltamspA mutant [corrected] This is the first experimental evidence that porins are the major determinants of the exceptionally low permeability of mycobacteria to hydrophilic molecules.     

MspA nanopores from subunit dimers

Mycobacterium smegmatis porin A (MspA) forms an octameric channel and represents the founding member of a new family of pore proteins. Control of subunit stoichiometry is important to tailor MspA for nanotechnological applications. In this study, two MspA monomers were connected by linkers ranging from 17 to 62 amino acids in length. The oligomeric pore proteins were purified from M. smegmatis and were shown to form functional channels in lipid bilayer experiments. These results indicated that the peptide linkers did not prohibit correct folding and localization of MspA. However, expression levels were reduced by 10-fold compared to wild-type MspA. MspA is ideal for nanopore sequencing due to its unique pore geometry and its robustness. To assess the usefulness of MspA made from dimeric subunits for DNA sequencing, we linked two M1-MspA monomers, whose constriction zones were modified to enable DNA translocation. Lipid bilayer experiments demonstrated that this construct also formed functional channels. Voltage gating of MspA pores made from M1 monomers and M1-M1 dimers was identical indicating similar structural and dynamic channel properties. Glucose uptake in M. smegmatis cells lacking porins was restored by expressing the dimeric mspA M1 gene indicating correct folding and localization of M1-M1 pores in their native membrane. Single-stranded DNA hairpins produced identical ionic current blockades in pores made from monomers and subunit dimers demonstrating that M1-M1 pores are suitable for DNA sequencing. This study provides the proof of principle that production of single-chain MspA pores in M. smegmatis is feasible and paves the way for generating MspA pores with altered stoichiometries. Subunit dimers enable better control of the chemical and physical properties of the constriction zone of MspA. This approach will be valuable both in understanding transport across the outer membrane in mycobacteria and in tailoring MspA for nanopore sequencing of DNA.     

Topology of the porin MspA in the outer membrane of Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the outer membrane (OM). It is the prototype of a new family of octameric porins with a single central channel of 9.6 nm in length and consists of two hydrophobic beta-barrels of 3.7 nm in length and a more hydrophilic, globular rim domain. The length of the hydrophobic domain of MspA does not match the thicknesses of mycobacterial OMs of 5-12 nm as derived from electron micrographs. Further, the membrane topology of MspA is unknown as it is for any other mycobacterial OM protein. We used MspA as a molecular ruler to define the boundaries of the OM of M. smegmatis by surface labeling of single cysteine mutants. Seventeen mutants covered the surface of the rim domain and were biotinylated with a membrane-impermeable reagent. The label efficiencies in vitro were remarkably similar to the predicted accessibilities of the cysteines. By contrast, six of these mutants were protected from biotinylation in M. smegmatis cells. Tryptophan 21 defines a horizontal plane that dissects the surface-exposed versus the membrane-protected residues of MspA. The 8 phenylalanines at position 99 form a ring at the periplasmic end of the hydrophobic beta-barrel domain. These results indicated that (i) the membrane boundaries of MspA are defined by aromatic girdles as in porins of Gram-negative bacteria and (ii) loops and a 3.4-nm long part of the hydrophilic rim domain are embedded into the OM of M. smegmatis. This is the first report suggesting that elements other than hydrophobic alpha-helices or beta-sheets are integrated into a lipid membrane.     

A tetrameric porin limits the cell wall permeability of Mycobacterium smegmatis

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant against many antibiotics. Pore proteins mediate the diffusion of hydrophilic nutrients across this membrane. Electron microscopy revealed that the outer membrane of Mycobacterium smegmatis contained about 1000 protein pores per microm(2), which are about 50-fold fewer pores per microm(2) than in Gram-negative bacteria. The projection structure of the major porin MspA of M. smegmatis was determined at 17 A resolution. MspA forms a cone-like tetrameric complex of 10 nm in length with a single central pore. Thus, MspA is drastically different from the trimeric porins of Gram-negative bacteria and represents a new class of channel proteins. The formation of MspA micelles indicated that the ends of MspA have different hydrophobicities. Oriented insertion of MspA into membranes was demonstrated in lipid bilayer experiments, which revealed a strongly asymmetrical voltage gating of MspA channels at -30 mV. The length of MspA is sufficient to span the outer membrane and contributes in combination with the tapering end of the pore and the low number of pores to the low permeability of the cell wall of M. smegmatis for hydrophilic compounds.     

Porins are required for uptake of phosphates by Mycobacterium smegmatis

Phosphorus is an essential nutrient, but how phosphates cross the mycobacterial cell wall is unknown. Phosphatase activity in whole cells of Mycobacterium smegmatis was significantly lower than that in lysed cells, indicating that access to the substrate was restricted. The loss of the outer membrane (OM) porin MspA also reduced the phosphatase activity in whole cells compared to that in lysed cells. A similar result was obtained for M. smegmatis that overexpressed endogenous alkaline phosphatase, indicating that PhoA is not a surface protein, contrary to a previous report. The uptake of phosphate by a mutant lacking the porins MspA and MspC was twofold lower than that by wild-type M. smegmatis. Strikingly, the loss of these porins resulted in a severe growth defect of M. smegmatis on low-phosphate plates. We concluded that the OM of M. smegmatis represents a permeability barrier for phosphates and that Msp porins are the only OM channels for the diffusion of phosphate in M. smegmatis. However, phosphate diffusion through Msp pores is rather inefficient as shown by the 10-fold lower permeability of M. smegmatis for phosphate compared to that for glucose. This is likely due to the negative charges in the constriction zone of Msp porins. The phosphatase activity in whole cells of Mycobacterium bovis BCG was significantly less than that in lysed cells, indicating a similar uptake pathway for phosphates in slow-growing mycobacteria. However, porins that could mediate the diffusion of phosphates across the OM of M. bovis BCG and Mycobacterium tuberculosis are unknown.     

The core of the tetrameric mycobacterial porin MspA is an extremely stable beta-sheet domain

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the cell wall and is the prototype of a new family of tetrameric porins with a single central pore of 10 nm in length. Infrared and circular dichroism spectroscopy revealed that MspA consists mainly of antiparallel beta-strands organized in a coherent domain. Heating to 92 and 112 degrees C was required to dissociate the MspA tetramer and to unfold the beta-sheet domain in the monomer, respectively. The stability of the MspA tetramer exceeded the remarkable stability of the porins of Gram-negative bacteria for every condition tested and was not reduced in the presence of 2% SDS and at any pH from 2 to 14. These results indicated that the interactions between the MspA subunits are different from those in the porins of Gram-negative bacteria and are discussed in the light of a channel-forming beta-barrel as a core structure of MspA. Surprisingly, the channel activity of MspA in 2% SDS and 7.6 m urea at 50 degrees C was reduced 13- and 30-fold, respectively, although the MspA tetramer and the beta-sheet domain were stable under those conditions. Channel closure by conformational changes of extracellular loops under those conditions is discussed to explain these observations. This study presents the first experimental evidence that outer membrane proteins not only from Gram-negative bacteria but also from mycobacteria are beta-sheet proteins and demonstrates that MspA constitutes the most stable transmembrane channel protein known so far. Thus, MspA may be of special interest for biotechnological applications.     

Cloning of the mspA gene encoding a porin from Mycobacterium smegmatis

Porins form channels in the mycolic acid layer of mycobacteria and thereby control access of hydrophilic molecules to the cell. We purified a 100 kDa protein from Mycobacterium smegmatis and demonstrated its channel-forming activity by reconstitution in planar lipid bilayers. The mspA gene encodes a mature protein of 184 amino acids and an N-terminal signal sequence. MALDI mass spectrometry of the purified porin revealed a mass of 19 406 Da, in agreement with the predicted mass of mature MspA. Dissociation of the porin by boiling in 80% dimethyl sulphoxide yielded the MspA monomer, which did not form channels any more. Escherichia coli cells expressing the mspA gene produced the MspA monomer and a 100 kDa protein, which had the same channel-forming activity as whole-cell extracts of M. smegmatis with organic solvents. These proteins were specifically detected by a polyclonal antiserum that was raised to purified MspA of M. smegmatis. These results demonstrate that the mspA gene encodes a protein of M. smegmatis, which assembles to an extremely stable oligomer with high channel-forming activity. Database searches did not reveal significant similarities to any other known protein. Southern blots showed that the chromosomes of fast-growing mycobacterial species contain homologous sequences to mspA, whereas no hybridization could be detected with DNA from slow growing mycobacteria. These results suggest that MspA is the prototype of a new class of channel-forming proteins.     

Mycobacterial porins--new channel proteins in unique outer membranes

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant to many antibiotics. Pore proteins spanning the outer membrane mediate the diffusion of hydrophilic nutrients. Mycobacterium tuberculosis possesses at least two porins in addition to the low activity channel protein OmpATb. OmpATb is essential for adaptation of M. tuberculosis to low pH and survival in macrophages and mice. The channel activity of OmpATb is likely to play a major role in the defence of M. tuberculosis against acidification within the phagosome of macrophages. MspA is the main porin of Mycobacterium smegmatis. It forms a tetrameric complex with a single central pore of 10 nm length and a cone-like structure. This structure differs clearly from that of the trimeric porins of Gram-negative bacteria, which form one 4 nm long pore per monomer. The 45-fold lower number of porins compared to Gram-negative bacteria and the exceptional length of the pores are two major determinants of the low permeability of the outer membrane of M. smegmatis for hydrophilic solutes. The importance of the synergism between slow transport through the porins and drug efflux or inactivation for the development of drugs against M. tuberculosis is discussed.     

Rhodococcus jostii Porin A (RjpA) Functions in Cholate Uptake

RjpA in Rhodococcus jostii is the ortholog of a channel-forming porin, MspA. Deletion of rjpA delayed growth of R. jostii on cholate but not on cholesterol. Eventual growth on cholate involved increased expression of other porins, namely, RjpB, RjpC, and RjpD. Porins appear essential for the uptake of bile acids by mycolic acid bacteria.     

Rv1698 of Mycobacterium tuberculosis represents a new class of channel-forming outer membrane proteins

Mycobacteria contain an outer membrane composed of mycolic acids and a large variety of other lipids. Its protective function is an essential virulence factor of Mycobacterium tuberculosis. Only OmpA, which has numerous homologs in Gram-negative bacteria, is known to form channels in the outer membrane of M. tuberculosis so far. Rv1698 was predicted to be an outer membrane protein of unknown function. Expression of rv1698 restored the sensitivity to ampicillin and chloramphenicol of a Mycobacterium smegmatis mutant lacking the main porin MspA. Uptake experiments showed that Rv1698 partially complemented the permeability defect of the M. smegmatis porin mutant for glucose. These results indicated that Rv1698 provides an unspecific pore that can partially substitute for MspA. Lipid bilayer experiments demonstrated that purified Rv1698 is an integral membrane protein that indeed produces channels. The main single channel conductance is 4.5 +/- 0.3 nanosiemens in 1 M KCl. Zero current potential measurements revealed a weak preference for cations. Whole cell digestion of recombinant M. smegmatis with proteinase K showed that Rv1698 is surface-accessible. Taken together, these experiments demonstrated that Rv1698 is a channel protein that is likely involved in transport processes across the outer membrane of M. tuberculosis. Rv1698 has single homologs of unknown functions in Corynebacterineae and thus represents the first member of a new class of channel proteins specific for mycolic acid-containing outer membranes.     

Unsupported planar lipid membranes formed from mycolic acids of Mycobacterium tuberculosis

The cell wall of mycobacteria includes a thick, robust, and highly impermeable outer membrane made from long-chain mycolic acids. These outer membranes form a primary layer of protection for mycobacteria and directly contribute to the virulence of diseases such as tuberculosis and leprosy. We have formed in vitro planar membranes using pure mycolic acids on circular apertures 20 to 90 μm in diameter. We find these membranes to be long lived and highly resistant to irreversible electroporation, demonstrating their general strength. Insertion of the outer membrane channel MspA into the membranes was observed indicating that the artificial mycolic acid membranes are suitable for controlled studies of the mycobacterial outer membrane and can be used in nanopore DNA translocation experiments.     

Mycobacterium bovis BCG genes involved in the biosynthesis of cyclopropyl keto- and hydroxy-mycolic acids

The resurgence of tuberculosis and the emergence of multidrug-resistant mycobacteria necessitate the development of new antituberculosis drugs. The biosynthesis of mycolic acids, essential elements of the mycobacterial envelope, is a good target for chemotherapy. Species of the Mycobacterium tuberculosis complex synthesize oxygenated mycolic acids with keto and methoxy functions. In contrast, the fast-growing Mycobacterium smegmatis synthesizes oxygenated mycolic acids with an epoxy function. We describe the isolation and sequencing of a cluster of four genes from Mycobacterium bovis bacillus Calmette–Guérin (BCG), coding for methyl transferases, and which, when transferred into M. smegmatis , allow the synthesis of ketomycolic acid, in addition to an as yet undescribed mycolic acid, hydroxymycolic acid. These oxygenated mycolic acids, unlike the regular mycolic acids of M. smegmatis , and similar to the mycolic acids of M. bovis , are highly cyclopropanated. Furthermore, there is a perfect match between the structures of the keto- and the hydroxy-mycolic acids. We propose a biosynthetic model in which there is a direct relationship between these two types of mycolic acid.     

Functional complementation of the essential gene fabG1 of Mycobacterium tuberculosis by Mycobacterium smegmatis fabG but not Escherichia coli fabG

Mycolic acids are a key component of the mycobacterial cell wall, providing structure and forming a major permeability barrier. In Mycobacterium tuberculosis mycolic acids are synthesized by type I and type II fatty acid synthases. One of the enzymes of the type II system is encoded by fabG1. We demonstrate here that this gene can be deleted from the M. tuberculosis chromosome only when another functional copy is provided elsewhere, showing that under normal culture conditions fabG1 is essential. FabG1 activity can be replaced by the corresponding enzyme from the closely related species Mycobacterium smegmatis but not by the enzyme from Escherichia coli. M. tuberculosis carrying FabG from M. smegmatis showed no phenotypic changes, and both the mycolic acids and cell wall permeability were unchanged. Thus, M. tuberculosis and M. smegmatis enzymes are interchangeable and do not control the lengths and types of mycolic acids synthesized.     

Recovery of octyl beta-glucoside from detergent/protein mixtures

Octyl beta-glucoside is a nonionic detergent which is useful in the purification and characterization of membrane proteins. However, the cost of this reagent is prohibitive for large-scale protein purifications. A simple procedure to recover pure octyl beta-glucoside from mixtures of detergents with proteins and buffer salts is described.     

Role of porins in iron uptake by Mycobacterium smegmatis

Many bacteria rely on siderophores to extract iron from the environment. However, acquisition of iron-loaded siderophores is dependent on high-affinity uptake systems that are not produced under high-iron conditions. The fact that bacteria are able to maintain iron homeostasis in the absence of siderophores indicates that alternative iron acquisition systems exist. It has been speculated that such low-affinity uptake of iron in Gram-negative bacteria includes diffusion of iron ions or chelates across the outer membrane through porins. The outer membrane of the saprophytic Mycobacterium smegmatis contains the Msp family of porins, which enable the diffusion of small and hydrophilic solutes, such as monosaccharides, amino acids, and phosphate. However, it is unknown how cations cross the outer membrane of mycobacteria. Here, we show that the Msp porins of M. smegmatis are involved in the acquisition of soluble iron under high-iron conditions. Uptake of ferric ions by a triple porin mutant was reduced compared to wild-type (wt) M. smegmatis. An intracellular iron reporter indicated that derepression of iron-responsive genes occurs at higher iron concentrations in the porin mutant. This was consistent with the finding that the porin mutant produced more siderophores under low-iron conditions than wt M. smegmatis. In contrast, uptake of the exochelin MS, the main siderophore of M. smegmatis, was not affected by the lack of porins, indicating that a specific outer membrane siderophore receptor exists. These results provide, to our knowledge, the first experimental evidence that general porins are indeed the outer membrane conduit of low-affinity iron acquisition systems in bacteria.     

Decreased outer membrane permeability protects mycobacteria from killing by ubiquitin-derived peptides

Ubiquitin-derived peptides are bactericidal in vitro and contribute to the mycobactericidal activity of the lysosome. To further define interactions of ubiquitin-derived peptides with mycobacteria, we screened for mutants with increased resistance to the bactericidal activity of the synthetic ubiquitin-derived peptide Ub2. The four Ub2-resistant Mycobacterium smegmatis mutants were also resistant to the bactericidal action of other antimicrobial peptides and macrophages. Two mutants were in the mspA gene encoding the main M. smegmatis porin. Using a translocation-deficient MspA point mutant, we showed that susceptibility of M. smegmatis to Ub2 was independent of MspA channel activity. Instead, the M. smegmatis Ub2-resistant mutants shared a common phenotype of decreased cell wall permeability compared with wild-type bacteria. Expression of mspA rendered Mycobacterium tuberculosis CDC1551 more susceptible both to ubiquitin-derived peptides in vitro and to lysosomal killing in macrophages. Finally, biochemical assays designed to assess membrane integrity indicated that Ub2 treatment impairs membrane function of M. smegmatis and M. tuberculosis cells . The M. smegmatis Ub2-resistant mutants were more resistant than wild-type M. smegmatis to this damage. We conclude that Ub2 targets mycobacterial membranes and that reduced membrane permeability provides mycobacteria intrinsic resistance against antimicrobial compounds including bactericidal ubiquitin-derived peptides.     

A procedure for the isolation and purification of plasmid DNA from Rhizobium meliloti

A procedure is described for the isolation and purification of the DNA of plasmids that are indigenous to the agriculturally important nitrogen-fixing bacterium Rhizobium meliloti. The procedure involves the lysis of bacteria with an ionic detergent or a mixture of ionic and nonionic detergents, the extraction of total DNA from precipitated membrane-DNA complexes, the enrichment of supercoiled plasmid DNA by the selective alkaline denaturation of chromosomal DNA, and a further purification of plasmid DNA using cesium chloridepropidium diiodide gradients. This procedure yields pure plasmid DNA in amounts of 30 to 50 μg per liter of a culture of cell density of approximately one A550 unit. The DNA thus obtained has been found to be of sufficient purity to serve as substrate for the most commonly used restriction endonucleases.     

FbpA-Dependent biosynthesis of trehalose dimycolate is required for the intrinsic multidrug resistance, cell wall structure, and colonial morphology of Mycobacterium smegmatis

Ligation of mycolic acids to structural components of the mycobacterial cell wall generates a hydrophobic, impermeable barrier that provides resistance to toxic compounds such as antibiotics. Secreted proteins FbpA, FbpB, and FbpC attach mycolic acids to arabinogalactan, generating mycolic acid methyl esters (MAME) or trehalose, generating alpha,alpha'-trehalose dimycolate (TDM; also called cord factor). Our studies of Mycobacterium smegmatis showed that disruption of fbpA did not affect MAME levels but resulted in a 45% reduction of TDM. The fbpA mutant displayed increased sensitivity to both front-line tuberculosis-targeted drugs as well as other broad-spectrum antibiotics widely used for antibacterial chemotherapy. The irregular, hydrophobic surface of wild-type M. smegmatis colonies became hydrophilic and smooth in the mutant. While expression of M. smegmatis fbpA restored defects of the mutant, heterologous expression of the Mycobacterium tuberculosis fbpA gene was less effective. A single mutation in the M. smegmatis FbpA esterase domain inactivated its ability to provide antibiotic resistance. These data show that production of TDM by FbpA is essential for the intrinsic antibiotic resistance and normal colonial morphology of some mycobacteria and support the concept that FbpA-specific inhibitors, alone or in combination with other antibiotics, could provide an effective treatment to tuberculosis and other mycobacterial diseases.