Homogeneous time-resolved fluorescence DNA hybridization assay by DNA-mediated formation of an EDTA-Eu(III)-beta-diketonate ternary complex.

A sensitive homogenous time-resolved fluorescence DNA hybridization assay method based on the formation of an EDTA-Eu(3+)-beta-diketonate ternary complex in the DNA hybrid was developed. The new approach combined the use of two DNA probes whose sequences compose the whole complementary strand to the target DNA, in which one probe was labeled with an EDTA-Eu(3+) complex on the 5'-terminus and the other, labeled with a bidentate beta-diketone on the 3'-terminus. After hybridization of two DNA probes with target DNA, EDTA-Eu(3+) and beta-diketone come close to each other, and an EDTA-Eu(3+)-beta-diketonate ternary complex with a strong and long-lived fluorescence was formed; thus the target DNA was detected sensitively with a detection limit of 6 pM (0.6 fmol per assay) by time-resolved fluorescence measurement. In the absence of the target DNA, due to the poor stability of bidentate beta-diketonate-Eu(3+) complex in very diluted solution, only a small amount of ternary fluorescence complex was formed.     

Homogeneous DNA hybridization assay by using europium luminescence energy transfer

Homogeneous DNA hybridization assay based on luminescence resonance energy transfer (LRET) from a tetradentate beta-diketonate europium chelate, 4,4'-bis(1' ',1' ',1' ',2' ',2' ',3' ',3' '-heptafluoro-4' ',6' '-hexanedion-6' '-yl)-chlorosulfo-o-terphenyl (BHHCT)-Eu(3+) (lambda(ex) = 340 nm and lambda(em) = 615 nm), to an organic dye, Cy5 (lambda(ex) = 643 nm and lambda(em) = 669 nm) has been developed, in which two DNA probes whose sequences comprises the whole complementary strand to the target DNA, are used; one probe having a biotin label on the 3'-terminus and the other a Cy5 label on the 5'-terminus. After hybridization, streptavidin labeled with BHHCT-Eu(3+) was added to the hybridization solution, and in the presence of the target DNA, the sensitized emission of Cy5 was observed when the hybridized complex was irradiated at 340 nm. In the absence of the target DNA, no emission was observed from Cy5.     

Direct probing: covalent attachment of probe DNA to double-stranded target DNA.

We report a novel procedure, which can be applied to probing of specific DNA, for covalently attaching probe DNA to complementary sequences in double-stranded target DNA. Employing hairpin-like oligonucleotide probes in combination with successive use of recA protein and DNA ligase, probes can be attached directly to target DNA molecules without dissociation of the DNA. The hairpin-like structure of the probes was designed so that the terminus of the probe oligonucleotide can be brought into close stereochemical proximity to the terminus of the complementary strand of target DNA for ligation. Because of the elimination of the DNA dissociation and subsequent hybridization (and washing) steps in the currently employed method, the probing process has become greatly simplified and more efficient and may lead to development of fully automated probing systems.     

Oligonucleotide quartz crystal microbalance sensor for the microalgae Alexandrium minutum (Dinophyceae)

We report the immobilization on a gold surface of a 20-base DNA probe labeled with disulfide group and on the selective hybridization with the complementary 20-base DNA strand. The oligonucleotide probe is the complementary strand of a partial sequence of the gene encoding for a large ribosomal RNA sub-unit which is a coding sequence of Alexandrium minutum DNA, a microalgae that produces neurotoxins responsible for paralytic shellfish poisoning on European and Asian coasts. The kinetics of DNA probe immobilization and hybridization were monitored in situ by using a 27 MHz quartz crystal microbalance under controlled hydrodynamic conditions. The frequency of the setup is stable to within a few hertz, corresponding to the nanogram scale, for 3h and makes it possible to follow frequency change from immobilization of the probe to hybridization of the complementary DNA target. This setup constitutes a biosensor, which is sensitive and selective, and the hybridization ratio between hybridized complementary DNA and immobilized DNA probes is 47%.     

Applications of universal probe on DNA hybridization

A convenient method for DNA hybridization termed "Universal probe" is described which is based on the principle of sandwich hybridization. This system consists of two probes: primary probe which is single-stranded DNA prepared from a chimeric phage-plasmid vector containing the complementary sequence to a target; and labeled secondary probe which has an opposite strand of the primary probe without the complementary sequence. By use this universal probe human beta-globin gene was able to be detected on Southern blots of genomic DNA. A potential advantage of this method is that the single-stranded primary probe is prepared easily by the chimeric phage-plasmid vector system and tedious labeling is not needed each time.     

Sequence dependence of fluorescence emission and quenching of doubly thiazole orange labeled DNA: effective design of a hybridization-sensitive probe

We have designed a doubly thiazole orange labeled nucleoside showing high fluorescence intensity for a hybrid with the target DNA and effective quenching for a single-stranded state. Knowing how much the fluorescence emission and quenching of this probe depend on the probe sequence and why there is such a sequence dependence is important for effective probe design, we synthesized more than 30 probe sequences and measured their fluorescence intensities. When the probe hybridized with the target DNA strands, there was strong emission, whereas the emission intensity was much weaker before hybridization; however, self-dimerization of probes suppressed fluorescence quenching. In particular, the G/C base pairs neighboring the labeled nucleotide in a self-dimeric structure resulted in a low quenching ability for the probe before hybridization. On the other hand, mismatched base pair formation around the labeled site decreased the fluorescence intensity because the neighboring sequence is the binding site of the tethered thiazole orange dyes. The hybridization enhanced the fluorescence of the probe even when the labeled nucleotide was located at the end of the probe strand; however, the partial lack of duplex structure resulted in a decrease in the fluorescence intensity of the hybrid.     

IDENTIFICATION OF THE CLASS PRYMNESIOPHYCEAE AND THE GENUS PHAEOCYSTIS WITH RIBOSOMAL RNA–TARGETED NUCLEIC ACID PROBES DETECTED BY FLOW CYTOMETRY1

Target regions specific for the class Prymnesiophyceae and the genus Phaeocystis (Har.) Lag. were identified from 18S ribosomal RNA coding regions, and two complementary probes were designed (PRYMN01 and PHAEO01). Detection of whole cells hybridized with these probes labeled with fluorescein isothiocyanate was difficult using epifluorescence microscopy because autofluorescence of the chlorophylls seriously interfered with the fluorescence of the probes. In contrast, flow cytometry proved very useful to detect and quantify the fluorescence of the hybridized cells. Hybridization conditions were optimized, especially with respect to formamide concentration. Both probes were tested on a large array of both target and nontarget strains. Positive and negative controls were also analyzed. Specificity was tested by adding a competing nonlabeled probe. Whereas probe PHAEO01 seems to have good specificity, probe PRYMN01 appeared less specific and must be used with stringent positive and negative controls.     

Quantitative DNA hybridization in solution using magnetic/luminescent core-shell nanoparticles

Nanoscale magnetic/luminescent core-shell particles were used for DNA quantification in a hybridization-in-solution approach. We demonstrated a rapid, simple, and non-polymerase chain reaction-based DNA hybridization-in-solution assay for quantifying bacteria capable of biodegrading methyl tertiary-butyl ether. Fe3O4/Eu:Gd2O3 core-shell nanoparticles synthesized by spray pyrolysis were biofunctionalized with NeutrAvidin. Following immobilization of a biotinylated probe DNA on the particles' surfaces via passive adsorption, target DNA labeled with fluorescein isothiocyanate was hybridized with probe DNA. The hybridized DNA complex was separated from solution with a magnet, while nonhybridized DNA remained in solution. The normalized fluorescence (fluorescein isothiocyanate/nanoparticles) measured with a spectrofluorometer indicated a linear quantification (R(2)=0.98) of the target bacterial 16 S rDNA. The rate of hybridization increased concurrently with the target DNA concentration. In addition, this approach differentiated between the signal outputs from perfectly complementary target and two-base mismatched target DNA in a range of concentrations, showing the specificity of the assay and the possibility for environmental applications.     

Towards single molecule analysis in PDMS microdevices: from the detection of ultra low dye concentrations to single DNA molecule studies

In this paper, we report on the performance of electrophoretical separation and laser-induced fluorescence (LIF) detection of dyes and fluorescently labeled biomolecules in poly(dimethylsiloxane) (PDMS) microdevices. The dyes fluorescein and fluorescein isothiocyanate (FITC) have been separated effectively in nM concentrations. Fluorescein injections gave linear concentration response in the range from 4 to 100 pM. As ultimate detection sensitivity, 100 fM injected fluorescein was obtained. Further, 100 fM injected fluorescein could be detected. This is to our knowledge the smallest electrokinetically injected dye concentration detected on a microchip. Injection studies of fluorescently labeled avidin revealed a theoretical detection limit of 25 nM for laser-induced fluorescence detection in good agreement with separations in glass chips. Furthermore, the injection of several and even one single DNA molecule using a PDMS cross injector has been demonstrated as well as free solution separation of lambda- and T2-DNA (60 pM each) in periodically structured channels.     

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5' overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.     

The making of strand-specific M13 probes

A novel approach has been developed for the preparation of highly radioactive, strand-specific M13 probes. A universal primer, complementary to the region 5' to the multiple cloning sites of M13mp7, was used to initiate the DNA synthesis of the complementary strand of the M13 sequence downstream from the inserted sequence. The synthesis of the (?) strand, which was labeled with a radioactively labeled precursor, did not proceed to completion so that the inserted sequence was kept single-stranded. Thus, a partially double-stranded probe that had the specificity of this inserted sequence was obtained. As an example for the application of single-stranded specific hybridization probes, an M13mp7 subclone of a zein cDNA clone of maize (A30) was labeled and used in a dot hybridization test to select from the hundreds of M13mp7 subclones of the zein genomic clone, 24, the sequences complementary to the probe. The specificity of the probe was confirmed by dideoxy chain terminator sequencing experiments.     

A homogeneous DNA hybridization system by using a new luminescence terbium chelate

Homogeneous DNA hybridization assay based on the luminescence resonance energy transfer (LRET) from a new luminescence terbium chelate, N,N,N(1),N(1)-[2,6-bis(3'-aminomethyl-1'-pyrazolyl)-4-phenylpyridine]tetrakis(acetic acid) (BPTA)-Tb(3+) (lambda(ex) = 325 nm and lambda(em) = 545 nm) to an organic dye, Cy3 (lambda(ex) = 548 nm and lambda(em) = 565 nm), has been developed. In the system, two DNA probes whose sequences are complementary to the two different consecutive sequences of a target DNA are used; one of the probes is labeled with the Tb(3+) chelate at the 3'-end, and the other is with Cy3 at the 5'-end. Labeling of the Tb(3+) chelate is accomplished via the linkage of a biotin-labeled DNA probe with the Tb(3+) chelate-labeled streptavidin. Strong sensitized emission of Cy3 was observed upon excitation of the Tb(3+) chelate at 325 nm, when the two probe DNAs were hybridized with the target DNA. The sensitivity of the assay was very high compared with those of the previous homogeneous-format assays using the conventional organic dyes; the detection limit of the present assay is about 30 pM of the target DNA strand.     

DNA bioassays based on the fluorescence ‘turn off’ of silver nanocluster beacon

Recognition and quantification of oligonucleotide sequences play important roles in medical diagnosis. In this study, a new fluorescent oligonucleotide‐stabilized silver nanocluster beacon (NCB) probe was designed for sensitive detection of oligonucleotide sequence targets. This probe contained two tailored DNA strands. One strand was a signal probe strand containing a cytosine‐rich strand template for fluorescent silver nanocluster (Ag NC) synthesis and a detection sections at each end. The other strand was a fluorescence enhancing strand containing a guanine‐rich section for signal enhancement at one end and a linker section complementary to one end of the signal probe strand. After synthesis of the Ag NCs and hybridization of the two strands, the fluorescence intensity of the as‐prepared silver NCB was enhanced 200‐fold compared with the Ag NCs. Two NCBs were designed to detect two disease‐related oligonucleotide sequences, and results indicated that the two target oligonucleotide sequences in the range 50.0–600.0 and 50.0–200.0 nM could be linearly detected with detection limits of 20 and 25 nM, respectively. The developed fluorescence method using NCBs for oligonucleotide sequence detection was sensitive, facile and had potential for use in bioanalysis and diagnosis.     

Development of a PNA probe for the detection of the toxic dinoflagellate Takayama pulchella

A peptide nucleic acid (PNA) probe was developed to detect the toxic dinoflagellate, Takayama pulchella TPXM, using fluorescent in situ hybridization (FISH) combined with epifluorescent microscopy and flow cytometry. The PNA probe was then used to analyze HAB samples from Xiamen Bay. The results indicated that the fluorescein phosphoramidite (FAM)-labeled probe (PNATP28S01) [Flu]-OO ATG CCA TCT CAA GA, entered the algal cells easily and bound to the target species specifically. High hybridization efficiency (nearly 100%) was observed. Detection by epifluorescence microscopy and flow cytometry gave comparable results. The fluorescence intensity of the PNA probe hybridized to T. pulchella cells was remarkably higher than that of two DNA probes used in this study and than the autofluorescence of the blank and negative control cells. In addition, the hybridization condition of the PNA probe was easier to control than DNA probes, and when applied to field-collected samples, the PNA probe showed higher binding efficiency to the target species than DNA probes. With the observed high specificity, binding efficiency, and detection signal intensity, the PNA probe will be useful for monitoring harmful algal blooms of T. pulchella.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

DNA hybridization biosensors using polylysine modified SPCEs

Two electrochemical DNA hybridization biosensors (genosensors) for the detection of a 30-mer sequence unique to severe acute respiratory syndrome (SARS) virus are described in this work. Both genosensors rely on the hybridization of the oligonucleotide target with its complementary probe, which is immobilized on positively charged polylysine modified screen-printed carbon electrodes (SPCEs), through electrostatic interactions. In one design, a biotinylated target is used and the detection of the hybridization reaction is monitored using alkaline phosphatase labeled streptavidin (S-AP). This enzyme catalyzes the hydrolysis of the substrate 3-indoxyl phosphate (3-IP) to indigo, which is then solubilized to indigo carmine and detected by means of cyclic voltammetry (CV). In the other design, the target is labeled using an Au(I) complex, sodium aurothiomalate, and the duplex formation is detected by measuring, for first time, the current generated by the hydrogen evolution catalyzed by the gold label. Using 30 min of hybridization time, a detection limit of 8 pM is calculated for the enzymatic genosensor. Although this good sensitivity cannot be reached with the metal label (0.5 nM), the use of this label allows a considerable decrease of the analysis time. Both genosensors do not require the modification of the oligonucleotide probe and using stringent experimental conditions (60 min of hybridization time and 50% formamide in the hybridization buffer) can discriminate between a complementary oligonucleotide and an oligonucleotide with a three-base mismatch.     

The application of an immobilized molecular beacon for the analysis of the DNA binding domains from the ecdysteroid receptor proteins Usp and EcR's interaction with the hsp27 response element

The nonstandard molecular beacon described in this article consists of 2 fragments, each built of a short single-stranded oligonucleotide sequence and a double-stranded sequence. One of these hybridization probes, labeled with a fluorescence donor (fluorescein), is solid phase immobilized. The second nonimmobilized probe is labeled with a fluorescence quencher (dabcyl). Annealing of both probes via single-stranded sequences was possible only in the presence of a specific protein molecule that recognized the response element sequence initially separated between the immobilized and nonimmobilized fragments. The system was applied successfully to detect the sequence-specific interaction of a natural hsp27 response element from the promoter of the hsp27 gene with the DNA binding domains of 2 nuclear receptor proteins: ultraspiracle Usp (UspDBD) and the ecdysone receptor EcR (EcRDBD). Measured in the absence of EcRDBD, the dissociation constant, K(d) of the UspDBD-hsp27 complex, was determined to be 3.26 nM, whereas for UspDBD devoid of the A-box (UspDBDDeltaA-hsp27 ), the dissociation constant was 4.81 nM. The respective K(d) values in the presence of EcRDBD were 2.43 nM and 10.80 nM. The results obtained with the immobilized molecular beacon technology were in agreement with those obtained by conventional fluorescence titrations and by fluorescence resonance energy transfer measurements with nonimmobilized beacons.     

Simultaneous detection of several oligonucleotides by time-resolved fluorometry: the use of a mixture of categorized microparticles in a sandwich type mixed-phase hybridization assay.

Porous, uniformly sized (50 micrometer) glycidyl methacrylate/ethylene dimethacrylate particles (SINTEF) were used as a solid phase to construct a sandwich type hybridization assay that allowed simultaneous detection of up to six oligonucleotides from a single sample. The assay was based on categorization of the particles by two organic prompt fluorophores, viz. fluorescein and dansyl, and quantification of the oligonucleotide hybridization by time-resolved fluorometry. Accordingly, allele-specific oligodeoxyribonucleotide probes were assembled on the particles by conventional phosphoramidite strategy using a non-cleavable linker, and the category defining fluorescein and/or dansyl tagged building blocks were inserted in the 3'-terminal sequence. An oligonucleotide bearing a photoluminescent europium(III) chelate was hybridized to the complementary 3'-terminal sequence of the target oligonucleotide, and the resulting duplex was further hybridized to the particle-bound allele-specific probes via the 5'-terminal sequence of the target. After hybridization each individual particle was subjected to three different fluorescence intensity measurements. The intensity of the prompt fluorescence signals of fluorescein and dansyl defined the particle category, while the europium(III) chelate emission quantified the hybridization. The length of the complementary region between the target oligonucleotide and the particle-bound probe was optimized to achieve maximal selectivity. Furthermore, the kinetics of hybridization and the effect of the concentration of the target oligomer on the efficiency of hybridization were evaluated. By this approach the possible presence of a three base deletion (DeltaF508), point mutation (G542X) and point deletion (1078delT) related to cystic fibrosis could unequivocally be detected from a single sample.     

Using self-assembled aptamers and fibrinogen-conjugated gold nanoparticles to detect DNA based on controlled thrombin activity

We have developed a colorimetric probe, based on the aggregation of gold nanoparticles (Au NPs), for the detection of DNA and for the analysis of single-nucleotide polymorphism (SNP); this probe functions through the modulation of the activity of thrombin (Thr) in the presence of bivalent thrombin-binding aptamers (TBAs). The bivalent TBAs were formed from TBA(27') (comprising a 27-base sequence providing TBA(27) functionality, a T(5) linker, and an 11-base sequence for hybridization) and TBA(15') (comprising a 15-base sequence providing TBA(15) functionality, a T(5) linker, and a 12-base sequence for hybridization) through their hybridization with perfectly matched DNA (DNA(pm)). The bivalent TBAs interacted specifically with thrombin, suppressing its activity toward fibrinogen-modified Au NPs (Fib-Au NPs). The potency of the inhibitory effect of TBA(15')-TBA(27')/DNA(pm) toward thrombin - and, thus, the degree of aggregation of the Fib-Au NPs - was highly dependent on the concentration of DNA(pm). Under the optimal conditions (50 pM thrombin, 2 nM TBA(15'), 2 nM TBA(27'), and 38 pM Fib-Au NPs), the linear relationship of the response of the probe toward DNA(pm) extended from 0.1 to 2 nM, with a correlation coefficient of 0.97. The limit of detection (LOD) for DNA(pm) was 20 pM, based on a signal-to-noise ratio of 3. We also applied a corresponding TBA(15″)-TBA(27″)/Thr/Fib-Au NP probe to the detection of the SNP of the Arg249Ser unit in the TP53 gene, with an LOD of 32 pM. Relative to conventional molecular beacon-based and crosslinking aggregation-based Au NP probes, our new approach offers higher sensitivity and higher selectivity toward DNA.