Research on the Long Time Swelling Properties of Poly (vinyl alcohol)/Hydroxylapatite Composite Hydrogel

Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.Thewater loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests ofPVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling propertieswith the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long timeimmersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HAcomposite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel inthe calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and itsequilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the networkstructure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content.Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium areobtained when the HA content is 3% and the number of freezing-thawing cycles is 7.     

Synthesis and Characterization of PVA-HA-Silk Composite Hydrogel by Orthogonal Experiment

PVA-HA-Silk composite hydrogel was synthesized with polyvinyl alcohol (PVA),nano-hydroxyapatite (HA) and natural silk by using the method of repeated freezing and thawing.A series of tests were performed to study water content,stress relaxation behavior,elastic modulus,and creep characteristics of PVA-HA-Silk composite hydrogel.Orthogonal experimental design method was used to analyze the influence degree of PVA,HA and silk (three kinds of raw materials) on mechanical properties and water content of the PVA-HA-Silk composite hydrogel to select the best material ratio according to their overall performance.The results demonstrate that the mass percentage of PVA has the greatest impact on the water content,followed by HA and silk.Compression stress-strain variation of PVA-HA-Silk composite hydrogel presents a nonlinear relationship,which proves that it is a typical viscoelastic material.Comparing the mechanical properties of 16 formulas,the formula of PVA-HA-silk composite hydrogel with mass percentage of PVA 15％,HA 2.0％ and silk 1.0％ is the best.     

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.     

Immobilization of microorganisms with PVA hardened by iterative freezing and thawing

In order to utilize polyvinyl alcohol (PVA) as a gel matrix for the immobilization of microorganisms, PVA was subjected to iterative freezing-thawing. The effects of the procedure on the mechanical characteristics of the PVA hydrogel and the stability of the immobilized microorganisms were investigated. PVA showed rubber-like elasticity after iterative freezing-thawing. Gel strength increased with the iteration number of freezing-thawing until seven iterations. Although the activities of both the free and immobilized cells decreased during the iteration of freezing-thawing, addition of cryoprotectants such as glycerol and skim milk was effective for preventing the decrease in activity.     

Reusable flexible poly(vinyl alcohol)/chitosan-based polymer carbon dots composite film for acid blue 93 dye adsorption

The design and synthesis of water-insoluble chitosan-based polymer carbon dots [P(CS-g-CA)CDs] are described. A polyvinyl alcohol/chitosan-based polymer carbon dot [PVA/P(CS-g-CA)CDs] composite film was prepared using a simple casting method to be used in dye adsorption. The composite film was characterized using FT-IR, XPS, transparency, contact angle, and mechanical properties tests, which showed the successful incorporation of P(CS-g-CA)CDs into the film and also revealed that hydrogen bonding improved the mechanical properties of the PVA film. Furthermore, the composite film displayed substantially enhanced hydrophobicity, making it suitable for use in aqueous environments. In addition, the composite film exhibited stable adsorption of acid blue 93 (AB93) at pH 2–9, with an enhanced adsorption capacity of 433.24 mg/g. The adsorption obeyed Langmuir law with an efficiency of more than 89% even after five cycles. Therefore, the PVA/P(CS-g-CA)CDs film is a promising material for the treatment of organic dye-polluted wastewater.     

Tensile and compressive properties of healthy and osteoarthritic human articular cartilage

Osteoarthritis (OA) is a disease affecting articular cartilage and the underlying bone, resulting from many biological and mechanical interacting factors which change the extracellular matrix (ECM) and cells and lead to increasing levels of cartilage degeneration, like softening, fibrillation, ulceration and cartilage loss. The early diagnosis of the disease is fundamental to prevent pain, further tissue degeneration and reduce hospital costs. Although morphological modifications can be detected by modern non-invasive diagnostic techniques, they may not be evident in the early stages of OA. The mechanical properties of articular cartilage are related to its composition and structure and are sensitive to even small changes in the ECM that could occur in early OA. The aim of the present study was to compare the mechanical properties of healthy and OA cartilage using a combined experimental-numerical approach. Experimental assessments consisted of step wise confined and unconfined compression and tension stress relaxation tests on disks (for compression) or strips (for tension) of cartilage obtained from human femoral heads discarded from the operating room after total hip replacement. The numerical model was based on the biphasic theory and included the tension-compression non-linearity. Considering OA samples vs normal samples, the static compressive modulus was 55-68% lower, the permeability was 60-80% higher, the dynamic compressive modulus was 59-64% lower, the static tension modulus was 72-83% lower. The model successfully simulated the experimental tests performed on healthy and OA cartilage and was used in combination with the experimental tests to evaluate the role of different ECM components in the mechanical response of normal and OA cartilage.     

明胶/海藻酸钠/沙蒿胶复合水凝胶的制备及表征

为探究明胶（G）、海藻酸钠（SA）,沙蒿胶（ASKG）对复合水凝胶的力学性能、溶胀和保湿性能的影响,采用共混-离子交联法制备海藻酸钠/明胶/沙蒿胶复合水凝胶,并对制得的水凝胶进行结构表征和溶血率测试。结果表明:当G质量分数为2.5%,SA为1.5%,ASKG为0.7%时,复合水凝胶压缩强度达到427.2 kPa,拉伸强度达到563.449 kPa,断裂伸长率为117%,溶胀率为744%,且具有较好的保湿性能。红外光谱表明,由于沙蒿胶中存在大量羟基,因此加入沙蒿胶后在3 300 cm^-1～3 600 cm^-1羟基峰形变宽。G/SA/ASKG复合水凝胶溶血率低于5%,具有较好的网络孔结构和血液相容性,为复合水凝胶在医用敷料方面的应用提供一定的参考价值。     

Combining submerged electrospray and UV photopolymerization for production of synthetic hydrogel microspheres for cell encapsulation

Microencapsulation within hydrogel microspheres holds much promise for drug and cell delivery applications. Synthetic hydrogels have many advantages over more commonly used natural materials such as alginate, however their use has been limited due to a lack of appropriate methods for manufacturing these microspheres under conditions compatible with sensitive proteins or cells. This study investigated the effect of flow rate and voltage on size and uniformity of the hydrogel microspheres produced via submerged electrospray combined with UV photopolymerization. In addition, the mechanical properties and cell survival within microspheres was studied. A poly(vinyl alcohol) (PVA) macromer solution was sprayed in sunflower oil under flow rates between 1-100 μL/min and voltages 0-10 kV. The modes of spraying observed were similar to those previously reported for electrospraying in air. Spheres produced were smaller for lower flow rates and higher voltages and mean size could be tailored from 50 to 1,500 μm. The microspheres exhibited a smooth, spherical morphology, did not aggregate and the compressive modulus of the spheres (350 kPa) was equivalent to bulk PVA (312 kPa). Finally, L929 fibroblasts were encapsulated within PVA microspheres and showed viability >90% after 24 h. This process shows great promise for the production of synthetic hydrogel microspheres, and specifically supports encapsulation of cells.     

Research on the Interstitial Fluid Load Support Characteristics and Start-Up Friction Mechanisms of PVA-HA-Silk Composite Hydrogel

Hydrogel has been extensively studied as an articular cartilage repair and replacement material. PVA-HA-Silk composite hydrogel was prepared by freezing-thawing method in this paper. Mechanical properties were determined by experiments and the friction coefficient of PVA-HA-Silk composite hydrogel against steel ball was verified using micro-tribometer. Finite Element Method （FEM） was used to study the lubrication mechanism of PVA-HA-Silk composite hydrogel and the relation between the interstitial fluid load support and the start-up friction resistance. The results show that the elastic modulus and the permeability are 2.07 MPa and 10^-15m^4N^-1s^-1, respectively, and the start-up friction coefficients of PVA-HA-Silk composite hydrogel are in the range of 0.154）.2 at different contact loads, contact time and sliding speeds. The start-up friction resistance of PVA-HA-Silk composite hydrogel increases with the contact load and contact time. With the increase in sliding speed, the start-up friction resistance of PVA-HA-Silk composite hydrogel decreases. There is an inverse relation between the start-up friction resistance and the interstitial fluid load support. The change of fluid flow with the increase in sliding displacement has an important effect on the interstitial fluid load support and friction resistance. The interstitial fluid load support decreases with the increase in contact load and contact time, while the interstitial fluid load support reinforces with the increase in sliding speed. Moreover, PVA-HA-Silk composite hydrogel has mechanical properties of recovery and self-lubricating.     

The Novelty in Fabrication of Poly Vinyl Alcohol/κ-Carrageenan Hydrogel with <Emphasis Type="Italic">Lactobacillus bulgaricus</Emphasis> Extract as Anti-inflammatory Wound Dressing Agent

Material barrier properties to microbes are an important issue in many pharmaceutical applications like wound dressings. A wide range of biomaterials has been used to manage the chronic inflamed wounds. Eight hydrogel membranes of poly vinyl alcohol (PVA) with κ-carrageenan (KC) and Lactobacillus bulgaricus extract (LAB) have been prepared by using freeze–thawing technique. To evaluate the membranes efficiency as wound dressing agents, various tests have been done like gel fraction, swelling behavior, mechanical properties, etc. The antibacterial activities of the prepared membranes were tested against the antibiotic-resistant bacterial isolates. In addition, the safety usage of the prepared hydrogel was checked on human dermal fibroblast cells. The anti-inflammatory properties of the prepared hydrogel on LPS-PBMC cell inflammatory model were quantified using enzyme-linked immunosorbent assay (ELISA) and real-time polymerase chain reaction (RT-qPCR). The analysis data of TGA, SEM, gel fraction, and swelling behavior showed changes in properties of prepared PVA\KC\LAB hydrogel membrane than pure PVA hydrogel membrane. The antibacterial activities of the prepared membranes augmented in LAB extract-prepared membranes. Out of the eight used hydrogel membranes, the PVAKC4 hydrogel membrane is the safest one on fibroblast cellular proliferation with a maximum proliferation percentage 97.3%. Also, all the used hydrogel membrane showed abilities to reduce the concentration of IL-2 and IL-8 compared with both negative and positive control. In addition, almost all the prepared hydrogel membrane showed variable abilities to downregulate the expression of TNF-α gene with superior effect of hydrogel membrane KC1. PVA/KC/LAB extract hydrogel membrane may be a promising material for wound dressing application and could accelerate the healing process of the chronic wound because of its antimicrobial and anti-inflammatory properties.     

聚乙烯醇复合水凝胶外用膜剂的制备与性能

目的：考察PVA／葡聚糖／羧甲基纤维素钠复合水凝胶外用膜剂的制备方法,并与纯PVA水凝胶贴膜进行对比,考察本膜剂在物理性能和药物体系的体外释放行为上所具备的优越性。方法：利用冷冻-解冻物理交联方法制备水凝胶装载胰岛素模型药物的外用膜剂,通过万能拉力机和差示扫描量热法考察膜剂的物理性能,利用高效液色谱法考察该膜剂的体外释放行为。结果：PVA复合水凝胶外用贴膜相较于纯PVA水凝胶贴膜的韧性减小、刚性增加,体外释放变好。结论：通过将具有材料友好性的PVA和多糖葡聚糖、羧甲基纤维素钠合并使用制备胰岛素复合水凝胶贴膜,既能保证贴膜具有良好的物理性能,又具有较好地释放行为,优于目前文献报道的纯PVA水凝胶贴膜性能,有望继续研究优化性能。     

Effect of osteonectin-derived peptide on the viscoelasticity of hydrogel/apatite nanocomposite scaffolds

Hydrogel/apatite nanocomposites are the ideal biomaterial to mimic the physio-chemical and biologic properties of the bone and to fabricate scaffolds for bone regeneration. The objective of this work was to investigate the effect of an osteonectin derived glutamic acid sequence on the viscoelastic properties of poly(lactide-ethylene oxide-fumarate) (PLEOF)/apatite composite, as a model degradable material in bone regeneration. Osteonectin is an extracellular acidic glycoprotein of the bone matrix, which is believed to be involved in linking the collagen network to hydroxyapatite (HA), the mineral phase of the bone. We synthesized a 6-glutamic acid sequence in solid phase with affinity to HA crystals via ionic interactions. One end of the synthesized peptide was functionalized with an acrylate group to covalently attach the peptide (Ac-Glu6) to the aqueous-based biodegradable and in situ crosslinkable PLEOF hydrogel matrix. To determine the effect of energetic interactions between the fillers and hydrogel matrix, HA nanoparticles were also treated with an acrylate functionalized 6-glycine amino acid peptide (Ac-Gly6) that interacts with the fillers only by van der Waals and polar interactions (without ionic interactions). Crosslinked PLEOF/apatite scaffolds were prepared using PLEOF as the degradable macromer, HA nanofillers treated with Ac-Glu6 peptide linker, and a neutral redox initiation system. The viscoelastic properties were studied by dynamic time sweep, strain sweep, and small amplitude oscillatory rheometry. Composites without surface treatment, treated with Ac-Gly6, and treated with Ac-Glu6 at different volume fractions and various particle sizes were examined. The results showed that the 6-mer glutamic acid sequence significantly affects the shear modulus of the scaffold because of ionic interactions between the peptide and HA crystals.     

Carbon nanotubes as structural nanofibers for hyaluronic acid hydrogel scaffolds

We have successfully dispersed functionalized single-walled carbon nanotubes (SWNTs) within hyaluronic acid-water solutions. Hybrid hyaluronic acid (HA) hydrogels with SWNTs were then formed by cross-linking with divinyl sulfone. We have found a considerable change in the morphology of the lyophilized hybrid hydrogels compared to HA hydrogels. The high water uptake capacity, an important property of HA hydrogels, remained almost unchanged after 2 wt % SWNT (vs HA) incorporation, despite a dramatic enhancement in the dynamic mechanical properties of the hybrid hydrogels compared to native ones. We have found a 300% enhancement in the storage modulus of hybrid hydrogel with only 2 wt % of SWNTs vs HA (0.06 wt % vs total weight including water content). This apparent contradiction can be explained by a networking effect between SWNTs, mediated by HA chains. As in biological tissue, HA plays a dual role of matrix and linker for the rigid reinforcing nanofibers.     

固定化细胞合成酯类载体的研究

本文以海藻酸钠、聚乙烯醇为材料包埋固定化细胞。建立了聚乙烯醇水凝胶的固定化方法,并与海藻酸钙凝胶剂进行了比较。该凝胶在产酯活性、机械强度、使用寿命、贮存稳定性等方面均优于后者。电镜观察也表明该凝胶适于包埋固定化细胞。     

Impacted morselized cancellous bone: mechanical effects of defatting and augmentation with fine hydroxyapatite particles

Geotechnical engineering testing techniques were used to study the mechanical properties of morselized cancellous bone (MCB) and the effects of defatting and augmentation with fine hydroxyapatite (HA) particles. Bovine and human cancellous bone was morselized, rinsed, and manually squeezed to remove excess fluid, producing a standard surgical MCB sample that was also used as a control. Some of the MCB was defatted with heat and detergent and mixed with HA particles in ratios ranging from 0% to 100% HA. Compaction tests were used to determine the effects of moisture content and the amount of MCB that can be packed into a confined space. One-dimensional consolidation tests were used to determine the uniaxial strain behavior, confined modulus, and steady-state creep rate. The compaction tests demonstrated that defatting and adding HA particles significantly increased density. The one-dimensional consolidation tests showed that strain was decreased, modulus was increased and the creep rate was decreased by defatting and adding HA.     

Cyclic cryopreservation affects the nanoscale material properties of trabecular bone

Tissues such as bone are often stored via freezing, or cryopreservation. During an experimental protocol, bone may be frozen and thawed a number of times. For whole bone, the mechanical properties (strength and modulus) do not significantly change throughout five freeze-thaw cycles. Material properties at the trabecular and lamellar scales are distinct from whole bone properties, thus the impact of freeze-thaw cycling at this scale is unknown. To address this, the effect of repeated freezing on viscoelastic material properties of trabecular bone was quantified via dynamic nanoindentation. Vertebrae from five cervine spines (1.5-year-old, male) were semi-randomly assigned, three-to-a-cycle, to 0–10 freeze-thaw cycles. After freeze-thaw cycling, the vertebrae were dissected, prepared and tested. ANOVA (factors cycle, frequency, and donor) on storage modulus, loss modulus, and loss tangent, were conducted. Results revealed significant changes between cycles for all material properties for most cycles, no significant difference across most of the dynamic range, and significant differences between some donors. Regression analysis showed a moderate positive correlation between cycles and material property for loss modulus and loss tangent, and weak negative correlation for storage modulus, all correlations were significant. These results indicate that not only is elasticity unpredictably altered, but also that damping and viscoelasticity tend to increase with additional freeze-thaw cycling.     

Investigation into the biphasic properties of a hydrogel for use in a cushion form replacement joint.

A hydrogel with potential applications in the role of a cushion form replacement joint bearing surface material has been investigated. The material properties are required for further development and design studies and have not previously been quantified. Creep indentation experiments were therefore performed on samples of the hydrogel. The biphasic model developed by Mow and co-workers (Mak et al., 1987; Mow et al., 1989a) was used to curve-fit the experimental data to theoretical solutions in order to extract the three intrinsic biphasic material properties of the hydrogel (aggregate modulus, HA, Poisson's ratio, Vs, and permeability, k). Ranges of material properties were determined: aggregate modulus was calculated to be between 18.4 and 27.5 MPa, Poisson's ratio 0.0-0.307, and permeability 0.012-7.27 x 10(-17) m4/Ns. The hydrogel thus had a higher aggregate modulus than values published for natural normal articular cartilage, the Poisson's ratios were similar to articular cartilage, and finally the hydrogel was found to be less permeable than articular cartilage. The determination of these values will facilitate further numerical analysis of the stress distribution in a cushion form replacement joint.     

Effect of calcium concentration on textural properties of high and low acyl mixed gellan gels

Textural properties of 1% low and high acyl gellan gels and their mixtures were studied using compression tests and the microcentrifuge-microfiltration based water holding capacity (WHC) method. Low acyl (1% LA), high acyl (1% HA) gels and mixtures of 1% 25/75 LA/HA, 50/50 LA/HA, 75/25 LA/HA gels with calcium concentrations ranging from 2 to 80 mM were studied. HA or mixed gels with a lower LA/HA ratio had a greater WHC and failure strain than that of LA or mixed gels with a higher LA/HA ratio. Gellan gels with a higher LA/HA ratio had a larger initial Young's modulus. Our study also indicates that a higher LA/HA ratio does not necessarily result in a gel with a larger failure stress, although LA gels are generally firmer than HA gels. Gel strength and WHC of HA and LA/HA mixtures may reflect both stabilization and destabilization effects of glycerate groups positioned at one of the glucose residues in each repeating tetrasaccharide unit of HA gels.     

Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation

A series of excellent hydrogels were prepared from poly(vinyl alcohol) (PVA) and carboxymethylated chitosan (CM-chitosan) with electron beam irradiation (EB) at room temperature. Electron spectroscopy analysis of the blend hydrogels revealed that good miscibility was sustained between CM-chitosan and PVA. The properties of the prepared hydrogels, such as the mechanical properties, gel fraction and swelling behavior were investigated. The mechanical properties and equilibrium degree of swelling improved obviously after adding CM-chitosan into PVA hydrogels. The gel fraction determined gravimetrically showed that a part of CM-chitosan was immobilized onto PVA hydrogel. The further analyses of FTIR and DSC spectra of the prepared gels after extracting sol manifested that there was a grafting interaction between PVA and CM-chitosan molecules under irradiation. The antibacterial activity of the hydrogels against Escherichia coli was also measured via optical density method. The blend hydrogels exhibited satisfying antibacterial activity against E. coli, even when the CM-chitosan concentration was only 3 wt%.     

Biomechanics of fruits and vegetables

The scope of fruit and vegetable biomechanics is reviewed. Sources of mechanical injury to produce in harvesting, processing, storage, packaging and transportation are briefly described. A survey of produce handling and transportation environments was conducted, whereby an envelope model encompassing composite spectra of trucks, railroad, marine and cargo aircraft is presented. The protective quality, i.e. strength of shipping containers is quantified in static and dynamic loading such as encountered in storage, handling and transportation. Mechanical response of fruits and vegetables in quasistatic and dynamic loading are formulated by a nonlinear rheological model, whereby a time and deformation dependent relaxation modulus is defined. A realistic link is established between the model and real fruits and vegetables by test procedures for determination of the parameters in the governing nonlinear equations. Based on the nonlinear relaxation modulus, mechanical damage of fruits and vegetables is quantified for static compression, transients and vibration loading as well as for combined static and dynamic loading, by equations of contact circle diameter, bruise depth and contact pressure. Distribution of loads over a maximal number of contact points per fruit is linked to geometrical patterns of produce packs. The application of Shock Damage Boundary techniques for produce-package testing is described along with a case study comparing the protective qualities of two types of apple packs. Produce damage quantification by direct fruit inspection in terms of a 'Bruise Index' is described, including a practical example, comparing the protective qualities of three types of apple packs in shipping tests. Indirect methods of mechanical injury evaluation, based on weight loss and CO2 emission differences between bruised and wholesome fruits are also briefly discussed.