Epoxy-silane linking of biomolecules is simple and effective for patterning neuronal cultures

Surface chemistry is one of the main factors that contributes to the longevity and compliance of cell patterning. Two to three weeks are required for dissociated, embryonic rat neuronal cultures to mature to the point that they regularly produce spontaneous and evoked responses. Though proper surface chemistry can be achieved through the use of covalent protein attachment, often it is not maintainable for the time periods necessary to study neuronal growth. Here we report a new and effective covalent linking approach using (3-glycidoxypropyl) trimethoxysilane (3-GPS) for creating long term neuronal patterns. Micrometer scale patterns of cell adhesive proteins were formed using microstamping; hippocampal neurons, cultured up to 1 month, followed those patterns. Cells did not grow on unmodified 3-GPS surfaces, producing non-permissive regions for the long-term cell patterning. Patterned neuronal networks were formed on two different types of MEA (polyimide or silicon nitride insulation) and maintained for 3 weeks. Even though the 3-GPS layer increased the impedance of metal electrodes by a factor of 2-3, final impedance levels were low enough that low noise extracellular recordings were achievable. Spontaneous neural activity was recorded as early as 10 days in vitro. Neural recording and stimulation were readily achieved from these networks. Our results showed that 3-GPS could be used on surfaces to immobilize biomolecules for a variety of neural engineering applications.     

Improved sensitivity and stability of amperometric enzyme microbiosensors by covalent attachment to gold electrodes

Covalent attachment of glucose oxidase to a pre-activated 16-mercaptohexadecanoic acid at a gold ultramicroelectrode surface improves sensitivity, stability, and reproducibility of enzyme-based amperometric microbiosensors. Self-assembled monolayers of the N-hydroxysuccinimide ester of 16-mercaptohexandecanoic acid (NHS-MHA) at gold electrodes enable spontaneous covalent linking of glucose oxidase to the gold surface of ultramicroelectrodes. By self-assembling NHS-MHA for 30 min, approximately 93% of the electrode surface is covered, thereby maximizing both the number of attachment sites for glucose oxidase, and sufficient diffusion of hydrogen peroxide to the gold electrode. The glucose oxidase reaction with NHS-MHA was optimized at pH of 6.5, and at a temperature of 43 degrees C, resulting in a surface concentration of 6.8+/-0.6 x 10(11) enzymemoleculescm(-2). Thus obtained amperometric microbiosensors were calibrated in the range of 1-10mM providing excellent correlation with the theoretical prediction of the microbiosensor response. The reported sensitivity of these microbiosensors documents an improvement by one order of magnitude compared to other approaches for covalent enzyme attachment. This is attributed to the NHS-MHA layer spacing the enzymatic recognition interface further from the electrode surface, thereby minimizing quenching of the enzyme activity.     

Immobilization of glucose oxidase on sepharose by UV-initiated graft copolymerization

The performance of a new method of enzyme immobilization based on photochemically initiated direct graft copolymerization was recently investigated. The immobilization reaction can be carried out in a simple way and by carefully selecting the reaction conditions, the enzyme-graft copolymer can be obtained as the main reaction product. Coupling efficiency of glucose oxidase has been found to depend only on the amount of photocatalyst (FeCl(3)) fixed on Sepharose used as polysaccharide support. Small quantities of glycidymethacrylate (GMA) (0.25 g/g dry Sepharose) are sufficient but necessary to achieve the best enzyme coupling efficiency (20-40%). Enzyme immobilization occurs very rapidly and the entire reaction occurs within 60 min. Reaction patterns and physicochemical characteristics of the obtained enzyme-graft copolymers exclude the glucose oxidase entrapment: therefore a covalent attachment mechanism may be proposed. The kinetic parameters of immobilized glucose oxidase (K(m)' = 2.0 x 10(-2)M) are quite similar to those of free enzyme (K(m) = 1.93 x 10(-2)M), and no diffusion limitation phenomena are evidenced in samples having different enzyme or polymer content. Lyophilization, thermostability, and long-term continuous operation also have been investigated. The advantages of this method over that using vinylenzyme copolymerization are discussed.     

Structure of the flavocoenzyme of two homologous amine oxidases: monomeric sarcosine oxidase and N-methyltryptophan oxidase

Monomeric sarcosine oxidase (MSOX) and N-methyltryptophan oxidase (MTOX) are homologous enzymes that catalyze the oxidative demethylation of sarcosine (N-methylglycine) and N-methyl-L-tryptophan, respectively. MSOX is induced in various bacteria upon growth on sarcosine. MTOX is an E. coli enzyme of unknown metabolic function. Both enzymes contain covalently bound flavin. The covalent flavin is at the FAD level as judged by electrospray mass spectrometry. The data provide the first evidence that MTOX is a flavoprotein. The following observations indicate that 8alpha-(S-cysteinyl)FAD is the covalent flavin in MSOX from Bacillus sp. B-0618 and MTOX. FMN-containing peptides, prepared by digestion of MSOX or MTOX with trypsin, chymotrypsin, and phosphodiesterase, exhibited absorption and fluorescence properties characteristic of an 8alpha-(S-cysteinyl)flavin and could be bound to apo-flavodoxin. The thioether link in the FMN-containing peptides was converted to the sulfone by performic acid oxidation, as judged by characteristic absorbance changes and an increase in flavin fluorescence. The sulfone underwent a predicted reductive cleavage reaction upon treatment with dithionite, releasing unmodified FMN. Cys315 was identified as the covalent FAD attachment site in MSOX from B. sp. B-0618, as judged by the sequence obtained for a flavin-containing tryptic peptide (GAVCMYT). Cys315 aligns with a conserved cysteine in MSOX from other bacteria, MTOX (Cys308) and pipecolate oxidase, a homologous mammalian enzyme known to contain covalently bound flavin. There is only one conserved cysteine found among these enzymes, suggesting that Cys308 is the covalent flavin attachment site in MTOX.     

Critical assessment of the Quartz Crystal Microbalance with Dissipation as an analytical tool for biosensor development and fundamental studies: Metallophthalocyanine-glucose oxidase biocomposite sensors

One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177-186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.     

Microwave‐assisted covalent immobilization of enzymes on inorganic surfaces

Enzymes on carriers can be easily recycled or used in fixed bed reactors. The immobilization often results in an improved stability. Depending on the support used and the method of coupling, this is a time‐consuming process. While the wide applicability of microwaves (MWs) within organic synthesis is known since the 1980s, proteins (including enzymes) are generally considered as too sensitive toward MW irradiation. In this article, MW methods were investigated to improve the processing speed of covalent enzyme immobilization on inorganic supports. Herein two laccases from Trametes versicolor and Myceliophthora thermophilia (Novozyme 51003®) and the glucose oxidase from Aspergillus niger were immobilized onto samples of ceramic honeycomb and porous glass (TRISOPERL® 1000 AMINO). The enzymes showed different sensitivity to MW irradiation, but all were suitable for MW‐assisted immobilization. Subsequent stability tests were conducted to compare conventional immobilization methods with those with MW irradiation. The glucose oxidase provided the best results. For all cases, a successful MW irradiation assisted covalent enzyme immobilization on solid support was obtained with a total 20‐fold reduction of the time necessary.     

Bienzyme system for the biocatalyzed deposition of polyaniline templated by multiwalled carbon nanotubes: a biosensor design

A novel method based on covalent attachment of two enzymes, glucose oxidase (GOD) and horseradish peroxide (HRP), onto carboxylic-derived multiwalled carbon nanotubes (MWNTs) for the deposition of electroactive polyaniline (PANI) under ambient conditions is described. Ultraviolet-visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and transmission electron microscopy were used to characterize the assembling of bienzyme and the morphology of PANI|MWNTs. Under the bienzyme biocatalytic condition, a head-to-tail structure of PANI templated by MWNTs was formed. The voltammetric characteristics of the resulting biosensor were investigated by cyclic voltammetry in the presence of glucose. The current response of PANI was linearly related to glucose concentration between 0.05 and 12.0mM with a correlation coefficient of 0.994. The synergistic performance of bienzyme, highly efficient polymerization, and templated deposition provide a general platform for the synthesis of nanowires and nanocircuits, the construction of bioelectronic devices, and the design of novel biosensors.     

Plasma modified surfaces for covalent immobilization of functional biomolecules in the absence of chemical linkers: towards better biosensors and a new generation of medical implants

Plasma modification and plasma polymer deposition are valuable technologies for the preparation of surfaces for the covalent binding of biomolecules for applications such as biosensors, medical prostheses, and diagnostic devices as well as surfaces for enzyme-mediated reactions. Covalency is conveniently tested by the ability of the surface to retain the attached molecules after vigorous washing with sodium dodecyl sulphate (SDS). Covalency is indicated if the fraction of protein retained lies above the curve characteristic of physisorption. Confidence in covalency is strengthened when the washing protocol is aggressive enough to remove all adsorbed protein from a control significantly more hydrophobic than the test surface. The use of linker chemistry to space the molecules from the surface is in some cases beneficial. However, the use of linker chemistry is not necessary to retain molecular function for long periods when the polymer surface is modified by energetic bombardment. The energetic bombardment retains hydrophilicity of the surface by crosslinking the subsurface, and this appears to facilitate retention of protein function. Energetic bombardment also increases the functional life of molecules immobilized and then freeze dried on plasma-modified surfaces. Analysis of the surfaces shows that the covalent binding mechanism is related to the presence of free radicals on the surface and in the subsurface regions. The unpaired electrons associated with the radicals appear to be mobile within the modified region and can diffuse to the surface to take part in binding interactions. Proactive implantable devices can make use of these principles of covalent attachment by seeding the surface of an implant with a biomolecule that elicits the desired interaction with cells and prevents undesirable responses.     

Spectrometric evidence for the flavin-1-phenylcyclopropylamine inactivator adduct with monoamine oxidase N

1-Phenylcyclopropylamine (1-PCPA) is shown to be an inactivator of the fungal flavoenzyme monoamine oxidase (MAO) N. Inactivation results in an increase in absorbance at 410 nm and is accompanied by the concomitant loss of the flavin absorption band at 458 nm. The spectral properties of the covalent adduct formed between the flavin cofactor of MAO N and 1-PCPA are similar to those reported for the irreversible inactivation product formed with 1-PCPA and mammalian mitochondrial monoamine oxidase B [Silverman, R. B., and Zieske, P. A. (1985) Biochemistry 24, 2128-2138]. There is a hypsochromic shift of the 410 nm band upon lowering the pH to 2, indicating that an N(5)-flavin adduct formed upon inactivation. Use of the fungal enzyme, MAO N, which lacks the covalent attachment to the flavin adenine dinucleotide (FAD) cofactor present in the mammalian forms MAO A and MAO B, has allowed for the isolation and further structural identification of the flavin-inactivator adduct. The incorporation of two (13)C labels into the inactivator, [2,3-(13)C(2)]-1-PCPA, followed by analysis using on-line liquid chromatography/electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy, provided a means to explore the structure of the flavin-inactivator adduct of MAO N. The spectral evidence supports covalent attachment of the 1-PCPA inactivator to the cofactor as N(5)-3-oxo-3-phenylpropyl-FAD.     

Covalent immobilization of proteins on carbon nanotubes using the cross-linker 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide--a critical assessment

Functionalization of carbon nanotubes (CNTs) with proteins is often a key step in their biological applications, particularly in biosensing. One popular method has used the cross-linker 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) to covalently conjugate proteins onto carboxylated CNTs. In this article, we critically assess the evidence presented in these conjugation studies in the literature. As CNTs have a natural affinity for diverse proteins through hydrophobic and electrostatic interactions, it is therefore important to differentiate protein covalent attachment from adsorption in the immobilization mechanism. Unfortunately, many studies of conjugating proteins onto CNTs using EDC lacked essential controls to eliminate the possibility of protein adsorption. In studies where the attachment was claimed to be covalent, discrepancies existed and the observed immobilization appeared to be due to adsorption. So far, bond analysis has been lacking to ascertain the nature of the attachment using EDC. We recommend that this approach of covalent immobilization of proteins on CNTs be re-evaluated and treated with caution.     

Substrate-independent approach for the generation of functional protein resistant surfaces

A new route for coating various substrates with antifouling polymer layers was developed. It consisted in deposition of an amino-rich adhesion layer by means of RF magnetron sputtering of Nylon 6,6 followed by the well-controlled, surface-initiated atom transfer radical polymerization of antifouling polymer brushes initiated by bromoisobutyrate covalently attached to amino groups present in the adhesion layer. Polymer brushes of hydroxy- and methoxy-capped oligoethyleneglycol methacrylate and carboxybetaine acrylamide were grafted from bromoisobutyrate initiator attached to a 15 nm thick amino-rich adhesion layer deposited on gold, silicon, polypropylene, and titanium-aluminum-vanadium alloy surfaces. Well-controlled polymerization kinetics made it possible to control the thickness of the brushes at a nanometer scale. Zero fouling from single protein solutions and a reduction of more than 90% in the fouling from blood plasma observed on the uncoated surfaces was achieved. The feasibility of functionalization with bioactive compounds was tested by covalent attachment of streptavidin onto poly(oligoethylene glycol methacrylate) brush and subsequent immobilization of model antibodies and oligonucleotides. The procedure is nondestructive and does not require any chemical preactivation or the presence of reactive groups on the substrate surface. Contrary to current antifouling modifications, the developed coating can be built on various classes of substrates and preserves its antifouling properties even in undiluted blood plasma. The new technique might be used for fabrication of biotechnological and biomedical devices with tailor-made functions that will not be impaired by fouling from ambient biological media.     

Role of the covalent flavin linkage in monomeric sarcosine oxidase

Monomeric sarcosine oxidase (MSOX) is a prototypical member of a recently recognized family of amine-oxidizing enzymes that all contain covalently bound flavin. Mutation of the covalent flavin attachment site in MSOX produces a catalytically inactive apoprotein (apoCys315Ala) that forms an unstable complex with FAD (K(d) = 100 muM), similar to that observed with wild-type apoMSOX where the complex is formed as an intermediate during covalent flavin attachment. In situ reconstitution of sarcosine oxidase activity is achieved by assaying apoCys315Ala in the presence of FAD or 8-nor-8-chloroFAD, an analogue with an approximately 55 mV higher reduction potential. After correction for an estimated 65% reconstitutable apoprotein, the specific activity of apoCys315Ala in the presence of excess FAD or 8-nor-8-chloroFAD is 14% or 80%, respectively, of that observed with wild-type MSOX. Unlike oxidized flavin, apoCys315Ala exhibits a high affinity for reduced flavin, as judged by results obtained with reduced 5-deazaFAD (5-deazaFADH(2)) where the estimated binding stoichiometry is unaffected by dialysis. The Cys315Ala.5-deazaFADH(2) complex is also air-stable but is readily oxidized by sarcosine imine, a reaction accompanied by release of weakly bound oxidized 5-deazaFAD. The dramatic difference in the binding affinity of apoCys315Ala for oxidized and reduced flavin indicates that the protein environment must induce a sizable increase in the reduction potential of noncovalently bound flavin (DeltaE(m) approximately 120 mV). The covalent flavin linkage prevents loss of weakly bound oxidized FAD and also modulates the flavin reduction potential in conjunction with the protein environment.     

Nanostructured transducer surfaces for electrochemical biosensor construction—Interfacing the sensing component with the electrode

For fabrication of effective electrochemical biosensors, interfacing the biomolecular receptor with the underlying transducer represents a critical step. The actual approach taken depends on the tethering layer covering the transducer, which is typically either a conducting polymeric matrix, or a thin film, such as an alkanethiol monolayer. Non-specific immobilisation methods can be either covalent, or non-covalent affinity attachment, with multipoint electrostatic attachment of the sensing biomolecule to either a polyanionic or polycationic layer representing the most common approach. Many specific affinity immobilisation strategies exist, but the majority make use of one of two binding systems. The first relies on the specific and strong affinity between biotin and proteins of the avidin family, with both bioreceptor and transducer bearing pendant biotins and avidin used as the crosslinker. The second approach employs a metal chelating group on the transducer to which can be bound a polyhistidine tag present on the N- or C-terminus of the receptor protein and which can be introduced genetically, when the expression sequence for a recombinant proteins is designed.     

Submicron patterning of DNA oligonucleotides on silicon

The covalent attachment of DNA oligonucleotides onto crystalline silicon (100) surfaces, in patterns with submicron features, in a straightforward, two-step process is presented. UV light exposure of a hydrogen-terminated silicon (100) surface coated with alkenes functionalized with N-hydroxysuccinimide ester groups resulted in the covalent attachment of the alkene as a monolayer on the surface. Submicron-scale patterning of surfaces was achieved by illumination with an interference pattern obtained by the transmission of 248 nm excimer laser light through a phase mask. The N-hydroxysuccinimide ester surface acted as a template for the subsequent covalent attachment of aminohexyl-modified DNA oligonucleotides. Oligonucleotide patterns, with feature sizes of 500 nm, were reliably produced over large areas. The patterned surfaces were characterized with atomic force microscopy, scanning electron microscopy, epifluorescence microscopy and ellipsometry. Complementary oligonucleotides were hybridized to the surface-attached oligonucleotides with a density of 7 × 10¹² DNA oligonucleotides per square centimetre. The method will offer much potential for the creation of nano- and micro-scale DNA biosensor devices in silicon.     

Association of the Acetylcholine-phosphatidyl Inositol Effect with a “Receptor” Proteolipid from Cerebral Cortex

IN spite of continuing research on the treatment of Parkinson's disease^1–3, no drug with clear advantages over L-dopa (the L-isomer of 3,4-dihydroxyphenylalanine) has yet been found. The problems of supply of L-dopa and reduction of its side effects⁴ are therefore still of interest. L-Dopa can be obtained from L-tyrosine by a hydroxylation reaction catalysed by the enzyme tyrosinase (EC 1.10.3.1). Such a reaction using immobilized tyrosinase could form the basis of an industrial method because L-tyrosine is cheap. Alternatively, in view of the fact that L-tyrosine is present in human serum, immobilized tyrosinase suitably implanted in the blood stream might be used to synthesize L-dopa in situ. We have been studying tyrosinase immobilized by covalent attachment to a cellulosic support. In the absence of a readily available mammalian tyrosinase or tyrosine hydroxylase which would be more suitable for clinical purposes we have used a polyphenol oxidase with tyrosinase activity, obtainable from mushrooms.     

Import of cytochrome c into mitochondria. Cytochrome c heme lyase

The import of cytochrome c into mitochondria can be resolved into a number of discrete steps. Here we report on the covalent attachment of heme to apocytochrome c by the enzyme cytochrome c heme lyase in mitochondria from Neurospora crassa. A new method was developed to measure directly the linkage of heme to apocytochrome c. This method is independent of conformational changes in the protein accompanying heme attachment. Tryptic peptides of [35S]cysteine-labelled apocytochrome c, and of enzymatically formed holocytochrome c, were resolved by reverse-phase HPLC. The cysteine-containing peptide to which heme was attached eluted later than the corresponding peptide from apocytochrome c and could be quantified by counting 35S radioactivity as a measure of holocytochrome c formation. Using this procedure, the covalent attachment of heme to apocytochrome c, which is dependent on the enzyme cytochrome c heme lyase, could be measured. Activity required heme (as hemin) and could be reversibly inhibited by the analogue deuterohemin. Holocytochrome c formation was stimulated 5--10-fold by NADH greater than NADPH greater than glutathione and was independent of a potential across the inner mitochondrial membrane. NADH was not required for the binding of apocytochrome c to mitochondria and was not involved in the reduction of the cysteine thiols prior to heme attachment. Holocytochrome c formation was also dependent on a cytosolic factor that was necessary for the heme attaching step of cytochrome c import. The factor was a heat-stable, protease-insensitive, low-molecular-mass component of unknown function. Cytochrome c heme lyase appeared to be a soluble protein located in the mitochondrial intermembrane space and was distinct from the previously identified apocytochrome c binding protein having a similar location. A model is presented in which the covalent attachment of heme by cytochrome c heme lyase also plays an essential role in the import pathway of cytochrome c.     

Discovery, characterization, and kinetic analysis of an alditol oxidase from Streptomyces coelicolor

A gene encoding an alditol oxidase was found in the genome of Streptomyces coelicolor A3(2). This newly identified oxidase, AldO, was expressed at extremely high levels in Escherichia coli when fused to maltose-binding protein. AldO is a soluble monomeric flavoprotein with subunits of 45.1 kDa, each containing a covalently bound FAD cofactor. From sequence alignments with other flavoprotein oxidases, it was found that AldO contains a conserved histidine (His(46)) that is typically involved in covalent FAD attachment. Covalent FAD binding is not observed in the H46A AldO mutant, confirming its role in covalent attachment of the flavin cofactor. Steady-state kinetic analyses revealed that wild-type AldO is active with several polyols. The alditols xylitol (K(m) = 0.32 mm, k(cat) = 13 s(-1)) and sorbitol (K(m) = 1.4 mm, k(cat) = 17 s(-1)) are the preferred substrates. From pre-steady-state kinetic analyses, using xylitol as substrate, it can be concluded that AldO mainly follows a ternary complex kinetic mechanism. Reduction of the flavin cofactor by xylitol occurs at a relatively high rate (99 s(-1)), after which a second kinetic event is observed, which is proposed to represent ring closure of the formed aldehyde product, yielding the hemiacetal of d-xylose. Reduced AldO readily reacts with molecular oxygen (1.7 x 10(5) m(-1) s(-1)), which confirms that the enzyme represents a true flavoprotein oxidase.     

Antibodies Covalently Immobilized on Actin Filaments for Fast Myosin Driven Analyte Transport

Biosensors would benefit from further miniaturization, increased detection rate and independence from external pumps and other bulky equipment. Whereas transportation systems built around molecular motors and cytoskeletal filaments hold significant promise in the latter regard, recent proof-of-principle devices based on the microtubule-kinesin motor system have not matched the speed of existing methods. An attractive solution to overcome this limitation would be the use of myosin driven propulsion of actin filaments which offers motility one order of magnitude faster than the kinesin-microtubule system. Here, we realized a necessary requirement for the use of the actomyosin system in biosensing devices, namely covalent attachment of antibodies to actin filaments using heterobifunctional cross-linkers. We also demonstrated consistent and rapid myosin II driven transport where velocity and the fraction of motile actin filaments was negligibly affected by the presence of antibody-antigen complexes at rather high density (>20 µm⁻¹). The results, however, also demonstrated that it was challenging to consistently achieve high density of functional antibodies along the actin filament, and optimization of the covalent coupling procedure to increase labeling density should be a major focus for future work. Despite the remaining challenges, the reported advances are important steps towards considerably faster nanoseparation than shown for previous molecular motor based devices, and enhanced miniaturization because of high bending flexibility of actin filaments.     

Vanillyl-alcohol oxidase, a tasteful biocatalyst

The covalent flavoenzyme vanillyl-alcohol oxidase (VAO) is a versatile biocatalyst. It converts a wide range of phenolic compounds by catalysing oxidation, deamination, demethylation, dehydrogenation and hydroxylation reactions. The production of natural vanillin, 4-hydroxybenzaldehyde, coniferyl alcohol and enantiomeric pure phenol derivatives is of interest for biotechnological applications. The hydroxylation of 4-alkylphenols is highly stereospecific for the (R)-isomer, whereas dehydrogenation of these substrates is specific for the cis- or trans-isomer. On the basis of crystallographic data, we suggest that the stereospecificity is related to the active site residue Asp170. Another important feature of VAO is the covalent flavin attachment. Studies from site-directed mutants suggest that the covalent flavin–protein interaction improves the catalytic performance as well as the long-term stability of VAO.     

The X-ray structure of N-methyltryptophan oxidase reveals the structural determinants of substrate specificity

The X-ray structure of monomeric N-methyltryptophan oxidase from Escherichia coli (MTOX) has been solved at 3.2 A resolution by molecular replacement methods using Bacillus sp. sarcosine oxidase structure (MSOX, 43% sequence identity) as search model. The analysis of the substrate binding site highlights the structural determinants that favour the accommodation of the bulky N-methyltryptophan residue in MTOX. In fact, although the nature and geometry of the catalytic residues within the first contact shell of the FAD moiety appear to be virtually superposable in MTOX and MSOX, the presence of a Thr residue in position 239 in MTOX (Met245 in MSOX) located at the entrance of the active site appears to play a key role for the recognition of the amino acid substrate side chain. Accordingly, a 15 fold increase in k(cat) and 100 fold decrease in K(m) for sarcosine as substrate has been achieved in MTOX upon T239M mutation, with a concomitant three-fold decrease in activity towards N-methyltryptophan. These data provide clear evidence for the presence of a catalytic core, common to the members of the methylaminoacid oxidase subfamily, and of a side chain recognition pocket, located at the entrance of the active site, that can be adjusted to host diverse aminoacids in the different enzyme species. The site involved in the covalent attachment of flavin has also been addressed by screening degenerate mutants in the relevant positions around Cys308-FAD linkage. Lys341 appears to be the key residue involved in flavin incorporation and covalent linkage.