High-efficiency yeast artificial chromosome fragmentation vectors

Chromosome fragmentation vectors (CFVs) are used to create deletion derivatives of large fragments of human DNA cloned as yeast artificial chromosomes (YACs). CFVs target insertion of a telomere sequence into the YAC via homologous recombination with Alu repetitive elements. This event results in the loss of all YAC sequences distal to the site of integration. A new series of CFVs has been developed. These vectors target fragmentation to both Alu and LINE human repetitive DNA elements. Recovery of deletion derivatives is ten- to 20-fold more efficient with the new vectors than with those described previously.     

Rescue of end fragments of yeast artificial chromosomes by homologous recombination in yeast.

Yeast artificial chromosomes (YACs) provide a powerful tool for the isolation and mapping of large regions of mammalian chromosomes. We developed a rapid and efficient method for the isolation of DNA fragments representing the extreme ends of YAC clones by the insertion of a rescue plasmid into the YAC vector by homologous recombination. Two rescue vectors were constructed containing a yeast LYS2 selectable gene, a bacterial origin of replication, an antibiotic resistance gene, a polylinker containing multiple restriction sites, and a fragment homologous to one arm of the pYAC4 vector. The 'end-cloning' procedure involves transformation of the rescue vector into yeast cells carrying a YAC clone, followed by preparation of yeast DNA and transformation into bacterial cells. The resulting plasmids carry end-specific DNA fragments up to 20 kb in length, which are suitable for use as hybridization probes, as templates for direct DNA sequencing, and as probes for mapping by fluorescence in situ hybridization. These vectors are suitable for the rescue of end-clones from any YAC constructed using a pYAC-derived vector. We demonstrate the utility of these plasmids by rescuing YAC-end fragments from a human YAC library.     

Recombination during transformation as a source of chimeric mammalian artificial chromosomes in yeast (YACs).

Mammalian DNAs cloned as artificial chromosomes in yeast (YACs) frequently are chimeras formed between noncontiguous DNAs. Using pairs of human and mouse YACs we examined the contribution of recombination during transformation or subsequent mitotic growth to chimeric YAC formation. The DNA from pairs of yeast strains containing homologous or heterologous YACs was transformed into a third strain under conditions typical for the development of YAC libraries. One YAC was selected and the presence of the second was then determined. Co-penetration of large molecules, as deduced from co-transformation of markers identifying the different YACs, was > 50%. In approximately half the cells receiving two homologous YACs, the YACs had undergone recombination. Co-transformation depends on recombination since it was reduced nearly 10-fold when the YACs were heterologous. While mitotic recombination between homologous YACs is nearly 100-fold higher than for yeast chromosomes, the level is still much lower than observed during transformation. To investigate the role of commonly occurring Alu repeats in chimera formation, spheroplasts were transformed with various human YACs and an unselected DNA fragment containing an Alu at one end and a telomere at the other. When unbroken YACs were used, between 1 and 6% of the selected YACs could incorporate the fragment as compared to 49% when the YACs were broken. We propose that Alu's or other commonly occurring repeats could be an important source of chimeric YACs. Since the frequency of chimeras formed between YACs or a YAC and an Alu-containing fragment was reduced when a rad52 mutant was the recipient and since intra-YAC deletions are reduced, rad52 and possibly other recombination-deficient mutants are expected to be useful for YAC library development.     

Modification and transfer into an embryonal carcinoma cell line of a 360-kilobase human-derived yeast artificial chromosome.

A neomycin resistance cassette was integrated into the human-derived insert of a 360-kilobase yeast artificial chromosome (YAC) by targeting homologous recombination to Alu repeat sequences. The modified YAC was transferred into an embryonal carcinoma cell line by using polyethylene glycol-mediated spheroplast fusion. A single copy of the human sequence was introduced intact and stably maintained in the absence of selection for over 40 generations. A substantial portion of the yeast genome was retained in hybrids in addition to the YAC. Hybrid cells containing the YAC retained the ability to differentiate when treated with retinoic acid. This approach provides a powerful tool for in vitro analysis because it can be used to modify any human DNA cloned as a YAC and to transfer large fragments of DNA intact into cultured mammalian cells, thereby facilitating functional studies of genes in the context of extensive flanking DNA sequences.     

The Contribution of Alu Elements to Mutagenic DNA Double-Strand Break Repair

Alu elements make up the largest family of human mobile elements, numbering 1.1 million copies and comprising 11% of the human genome. As a consequence of evolution and genetic drift, Alu elements of various sequence divergence exist throughout the human genome. Alu/Alu recombination has been shown to cause approximately 0.5% of new human genetic diseases and contribute to extensive genomic structural variation. To begin understanding the molecular mechanisms leading to these rearrangements in mammalian cells, we constructed Alu/Alu recombination reporter cell lines containing Alu elements ranging in sequence divergence from 0%-30% that allow detection of both Alu/Alu recombination and large non-homologous end joining (NHEJ) deletions that range from 1.0 to 1.9 kb in size. Introduction of as little as 0.7% sequence divergence between Alu elements resulted in a significant reduction in recombination, which indicates even small degrees of sequence divergence reduce the efficiency of homology-directed DNA double-strand break (DSB) repair. Further reduction in recombination was observed in a sequence divergence-dependent manner for diverged Alu/Alu recombination constructs with up to 10% sequence divergence. With greater levels of sequence divergence (15%-30%), we observed a significant increase in DSB repair due to a shift from Alu/Alu recombination to variable-length NHEJ which removes sequence between the two Alu elements. This increase in NHEJ deletions depends on the presence of Alu sequence homeology (similar but not identical sequences). Analysis of recombination products revealed that Alu/Alu recombination junctions occur more frequently in the first 100 bp of the Alu element within our reporter assay, just as they do in genomic Alu/Alu recombination events. This is the first extensive study characterizing the influence of Alu element sequence divergence on DNA repair, which will inform predictions regarding the effect of Alu element sequence divergence on both the rate and nature of DNA repair events.     

YAC fragmentation with repetitive and single-copy sequences: detailed physical mapping of the presenilin 1 gene on chromosome 14

We constructed new LYS2 fragmentation vectors that allow direct acentric and centric fragmentation of yeast artificial chromosomes (YACs) and selection of fragmented YACs in yeast strain AB1380. The fragmentation vectors were used efficiently with repetitive (e.g., Alu), low-copy (e.g., CA-repeats) and single-copy (e.g., exons) sequences. High recombination efficiencies were obtained in fragmenting two different CEPH YACs with the Alu consensus sequence as target sequences for homologous recombination. Analysis of the acentric Alu fragmentation panel of 788H12, containing the presenilin 1 (PSEN1) gene for familial Alzheimer's disease (AD), indicated that high-resolution YAC fragmentation panels covering the entire parent YAC are obtained. Also, marker content analysis of the fragmentation panel indicated that fragmented YACs were propagated stably without rearrangements. The same fragmentation vectors were used efficiently for fragmentation of 788H12 with unique sequences, i.e., exons 3 and 12 of PSEN1 and D14S77, a polymorphic CA repeat, as target sequences. Together, our YAC fragmentation data of 788H12 provided a size estimate for the coding region of PSEN1 of 60kb and a more precise localization of D14S77 at 25kb upstream of PSEN1.     

Detection of homologous recombination between yeast artificial chromosomes with overlapping inserts.

We have developed a system which facilitates the detection of recombination between Yeast Artificial Chromosomes (YAC's) carrying homologous inserts. The system consists of a classical YAC vector, a new YAC vector and two appropriately labelled yeast strains of opposite mating type. The new YAC vector differs in markers from the canonical YAC vector. To test whether homologous recombination takes place, phage lambda DNA was cloned in the two vectors to provide a region of homology. The two constructs were then introduced into yeast strains of opposite mating type in which the endogenous genes for the selective markers present in the vectors are not expressed. Artificial chromosomes obtained by meiotic recombination are detected in the spores resulting from the mating.     

High frequency excision of Ty elements during transformation of yeast.

Yeast (Saccharomyces cerevisiae) transposons (Ty elements) are excised from up to 20% of supercoiled plasmids during transformation of yeast cells. The excision occurs by homologous recombination across the direct terminal repeats (deltas) of the Ty element, leaving behind a single delta in the transforming plasmid. Only the initial transforming plasmid is susceptible to excision, and no high frequency excision is observed in plasmids that have become established in transformed cells or in plasmids that are resident in cells undergoing transformation. High frequency excision from plasmids during yeast transformation is not specific for Ty elements and can be observed with other segments of plasmid DNA bounded by direct repeats. The frequency of Ty excision from supercoiled plasmids is greatly reduced when the host yeast cells contain the rad52 mutation, a defect in double-strand DNA repair. When linear or ligated-linear plasmid DNAs containing a Ty element are used for transformation, few or no excision plasmids are found among the transformant colonies. These results suggest that when a yeast cell is transformed with a supercoiled plasmid, the plasmid DNA is highly susceptible to homologous recombination for a short period of time.     

Integrity of human YACs during propagation in recombination-deficient yeast strains

Several isogenic strains with defects in recombination/repair genes (RAD1, RAD50, RAD51, RAD52, RAD54, and RAD55) were examined for their ability to propagate accurately a variety of linear and circular yeast artificial chromosomes (YACs) containing human DNA inserts. To assess YAC stability, the human DNA inserts were internally marked by an ADE2-pBR-URA3 cassette. Following selection for Ura- clones on 5-fluoroorotic acid containing medium, the following types of YAC deletions were identified: (i) those caused by homologous recombination with a telomeric pBR sequence; (ii) internal deletions, presumed to occur by recombination between commonly occurring DNA repeats such as Alu and LINE sequences; and (iii) deletions leading to loss of part of a YAC arm. rad52 host strains, but not other recombination-deficient strains, decreased the rate of all types of YAC deletions 25- to 400-fold. We have also developed and tested kar1 strains with a conditional RAD52 gene that allow transfer of a YAC from any host into a recombination-deficient background. These strains provide an efficient tool for stabilization of YACs and are useful for allowing additional recombinational modification of YACs.     

High-level expressing YAC vector for transgenic animal bioreactors

The position effect is one major problem in the production of transgenic animals as mammary gland bioreactors. In the present study, we introduced the human growth hormone (hGH) gene into 210-kb human alpha-lactalbumin position-independent YAC vectors using homologous recombination and produced transgenic rats via microinjection of YAC DNA into rat embryos. The efficiency of producing transgenic rats with the YAC vector DNA was the same as that using plasmid constructs. All analyzed transgenic rats had one copy of the transgene and produced milk containing a high level of hGH (0.25-8.9 mg/ml). In transgenic rats with the YAC vector in which the human alpha-lactalbumin gene was replaced with the hGH gene, tissue specificity of hGH mRNA was the same as that of the endogenous rat alpha-lactalbumin gene. Thus, the 210-kb human alpha-lactalbumin YAC is a useful vector for high-level expression of foreign genes in the milk of transgenic animals.     

Assembly of long DNA sequences using a new synthetic Escherichia coli-yeast shuttle vector

Synthetic biology is a newly developed field of research focused on designing and rebuilding novel biomolecular components, circuits, and networks. Synthetic biology can also help understand biological principles and engineer complex artificial metabolic systems. DNA manipulation on a large genome-wide scale is an inevitable challenge, but a necessary tool for synthetic biology. To improve the methods used for the synthesis of long DNA fragments, here we constructed a novel shuttle vector named p GF(plasmid Genome Fast) for DNA assembly in vivo. The BAC plasmid p CC1 BAC, which can accommodate large DNA molecules, was chosen as the backbone. The sequence of the yeast artificial chromosome(YAC) regulatory element CEN6-ARS4 was synthesized and inserted into the plasmid to enable it to replicate in yeast. The selection sequence HIS3, obtained by polymerase chain reaction(PCR) from the plasmid p BS313, was inserted for screening. This new synthetic shuttle vector can mediate the transformation-associated recombination(TAR) assembly of large DNA fragments in yeast, and the assembled products can be transformed into Escherichia coli for further amplification. We also conducted in vivo DNA assembly using p GF and yeast homologous recombination and constructed a 31-kb long DNA sequence from the cyanophage PP genome. Our findings show that this novel shuttle vector would be a useful tool for efficient genome-scale DNA reconstruction.     

Defining the minimal length of sequence homology required for selective gene isolation by TAR cloning

The transformation-associated recombination (TAR) cloning technique allows selective and accurate isolation of chromosomal regions and genes from complex genomes. The technique is based on in vivo recombination between genomic DNA and a linearized vector containing homologous sequences, or hooks, to the gene of interest. The recombination occurs during transformation of yeast spheroplasts that results in the generation of a yeast artificial chromosome (YAC) containing the gene of interest. To further enhance and refine the TAR cloning technology, we determined the minimal size of a specific hook required for gene isolation utilizing the Tg.AC mouse transgene as a targeted region. For this purpose a set of vectors containing a B1 repeat hook and a Tg.AC-specific hook of variable sizes (from 20 to 800 bp) was constructed and checked for efficiency of transgene isolation by a radial TAR cloning. When vectors with a specific hook that was ≥60 bp were utilized, ~2% of transformants contained circular YACs with the Tg.AC transgene sequences. Efficiency of cloning dramatically decreased when the TAR vector contained a hook of 40 bp or less. Thus, the minimal length of a unique sequence required for gene isolation by TAR is ~60 bp. No transgene-positive YAC clones were detected when an ARS element was incorporated into a vector, demonstrating that the absence of a yeast origin of replication in a vector is a prerequisite for efficient gene isolation by TAR cloning.     

Enrichment for histone H3 lysine 9 methylation at Alu repeats in human cells

The aim of this study was to identify in human cells common targets of histone H3 lysine 9 (H3-Lys9) methylation, a modification that is generally associated with gene silencing. After chromatin immunoprecipitation using an H3-Lys9 methylated antibody, we cloned the recovered DNA and sequenced 47 independent clones. Of these, 38 clones (81%) contained repetitive elements, either short interspersed transposable element (SINE or Alu elements), long terminal repeat (LTR), long interspersed transposable element (LINE), or satellite region (ALR/Alpha) DNA, and three additional clones were near Alu elements. Further characterization of these repetitive elements revealed that 32 clones (68%) were Alu repeats, corresponding to both old Alu (23 clones) and young Alu (9 clones) subfamilies. Association of H3-Lys9 methylation was confirmed by chromatin immunoprecipitation-PCR using conserved Alu primers. In addition, we randomly selected 5 Alu repeats from the recovered clones and confirmed association with H3-Lys9 by PCR using primer sets flanking the Alu elements. Treatment with the DNA methyltransferase inhibitor 5-aza-2'-deoxycytidine rapidly decreased the level of H3-Lys9 methylation in the Alu elements, suggesting that H3-Lys9 methylation may be related to the suppression of Alu elements through DNA methylation. Thus H3-Lys9 methylation is enriched at human repetitive elements, particularly Alu elements, and may play a role in the suppression of recombination by these elements.     

AluElements: Repetitive DNA as Facilitators of Chromosomal Rearrangement

Alu repeats are the most common type of repetitive DNA sequences dispersed throughout the human genome. Technical advances in the field of cytogenetics and molecular biology have facilitated the analysis of epithelial tumors and hematologic malignancies which has led to the observation of Alu elements in and near sites often involved in chromosomal rearrangements. Repair mechanisms of double strand breaks (DSB) such as homol-ogous recombination (HR) may rely on the sequence homology of Alu repeats, potentially leading to chromosomal rearrange-ments. Databases have confirmed the strong association between Alu repeats, specifically the 26 bp consensus sequence and chro-mosomal regions involved in deletions and translocations. Although the Alu repetitive sequence is a potential "hotspot" during homologous recombination, there are other cellular mech-anisms that may play a more prominent role in the initiation of chromosomal rearrangements.     

Molecular characterization of a mouse genomic element mobilized by advanced glycation endproduct modified-DNA (AGE-DNA).

BACKGROUND: DNA modified by advanced glycation endproducts (AGEs) undergoes a high frequency of insertional mutagenesis. In mouse lymphoid cells, these mutations are due in part to the transposition of host genomic elements that contain a DNA region homologous to the Alu family of repetitive elements. One particular 853 bp insertion, designated INS-1, was identified previously as a DNA element common to plasmids recovered from multiple, independent lymphoid cell transfections. MATERIALS AND METHODS: To characterize the genomic origin of this element, we used a 281-bp region of non-Alu-containing INS-1 sequence, designated. CORE, as a probe in Southern hybridization and for screening a bacteriophage mouse genomic DNA library. The resultant clones were sequenced and localized within the mouse genome. RESULTS: Two distinct genomic clones of 15 kB and 17 kB in size were isolated. A 522-bp unique region common to INS-1 and corresponding to the CORE sequence was identified in each clone. In both cases, CORE was found to be surrounded by repetitive DNA sequences: a 339-bp MT repeat at the 5' end, and a 150-bp B1 repeat at the 3' end. The CORE sequence was localized to mouse chromosome 1. CONCLUSIONS: These studies revealed that the CORE region of INS is present in low copy number but is associated with known repetitive DNA elements. The presence of these repetitive elements may facilitate the transposition of CORE by recombination or other, more complex rearrangement events, and explain in part the origin of AGE-induced insertional mutations.     

Identification of a deletion hotspot on distal mouse chromosome 4 by YAC fingerprinting

Using repetitive elements as probes, genomic DNA fingerprints of four randomly selected yeast artificial chromosome (YAC) clones (two human and two mouse-derived YAC) were analyzed to determine the mutation level following X-ray exposure. Because the repetitive probes were derived from the mammalian host DNA, most of the fingerprint bands originated from the artificial chromosomes and not from the yeast genome. For none of the YAC clones was the mutation frequency elevated following X-ray exposure. However, for one mouse-derived YAC, the mutation level was unusually high (7%; 42 mutants of 607 clones analyzed), whereas for the other three YACs, the mutation level was nearly 0%. Surprisingly, 40 of the 42 mutations were deletions occurring only at three of the 20 mouse specific fingerprint bands. One of the frequently deleted fragments was cloned, sequenced and mapped to distal mouse chromosome 4, which has been repeatedly reported to be the most unstable region of the whole mouse genome, associated with various tumors. Deletion mapping of six YAC mutants revealed this fragment to be completely deleted in four YACs. In the other two mutants, recombination occurred within the fragment, in each case initiated at the same LINE-1 element. In conclusion, the presented YAC fingerprint is a useful tool for detecting and characterizing unstable regions in mammalian genomes.     

Selective isolation of genomic loci from complex genomes by transformation-associated recombination cloning in the yeast Saccharomyces cerevisiae

Here, we describe a protocol for the selective isolation of any genomic fragment or gene of interest up to 250 kb in size from complex genomes as a circular yeast artificial chromosome (YAC). The method is based on transformation-associated recombination (TAR) in the yeast Saccharomyces cerevisiae between genomic DNA and a linearized TAR cloning vector containing targeting sequences homologous to a region of interest. Recombination between the vector and homologous sequences in the co-transformed mammalian DNA results in the establishment of a YAC that is able to propagate, segregate and be selected for in yeast. Yield of gene-positive clones varies from 1% to 5%. The entire procedure takes 2 weeks to complete once the TAR vector is constructed and genomic DNA is prepared. The TAR cloning method has a broad application in functional and comparative genomics, long-range haplotyping and characterization of chromosomal rearrangements, including copy number variations.     

Induction of multiple plasmid recombination in Saccharomyces cerevisiae by psoralen reaction and double strand breaks.

DNA damage-induced multiple recombination was studied by cotransforming yeast cells with pairs of nonreplicating plasmids carrying different genetic markers. Reaction of one of the plasmids with the interstrand crosslinking agent, psoralen, stimulated cellular transformation by the undamaged plasmid. The cotransformants carried copies of both plasmids cointegrated in tandem arrays at chromosomal sites homologous to either the damaged or the undamaged DNA. Plasmid linearization, by restriction endonuclease digestion, was also found to stimulate the cointegration of unmodified plasmids. Disruption of the RAD1 gene reduced the psoralen damage-induced cotransformation of intact plasmid, but had no effect on the stimulation by double strand breaks. Placement of the double strand breaks within yeast genes produced cointegration only at sequences homologous to the damaged plasmids, while digestion within vector sequences produced integration at chromosomal sites homologous to either the damaged or the undamaged plasmid molecules. These observations suggest a model for multiple recombination events in which an initial exchange occurs between the damaged DNA and homologous sequences on an undamaged molecule. Linked sequences on the undamaged molecule up to 870 base pairs distant from the break site participate in subsequent exchanges with other intact DNA molecules. These events result in recombinants produced by reciprocal exchange between three or more DNA molecules.     

A new vector for recombination-based cloning of large DNA fragments from yeast artificial chromosomes.

The functional analysis of genes frequently requires manipulation of large genomic regions embedded in yeast artificial chromosomes (YACs). We have designed a yeast-bacteria shuttle vector, pClasper, that can be used to clone specific regions of interest from YACs by homologous recombination. The important feature of pClasper is the presence of the mini-F factor replicon. This leads to a significant increase in the size of the plasmid inserts that can be maintained in bacteria after cloning by homologous recombination in yeast. The utility of this vector lies in its ability to maintain large fragments in bacteria and yeast, allowing for mutagenesis in yeast and simplified preparation of plasmid DNA in bacteria. Using PCR-generated recombinogenic fragments in pClasper we cloned a 27 kb region from a YAC containing the Hoxc cluster and a 130 kb region containing the entire Hoxb cluster. No rearrangements were seen when the recombinants in the shuttle vector were transferred to bacteria. We outline the potential uses of pClasper for functional studies of large genomic regions by transgenic and other analyses.     

Mechanisms of tandem duplication in the Duchenne muscular dystrophy gene include both homologous and nonhomologous intrachromosomal recombination.

Three tandem duplications were previously identified in patients with Duchenne muscular dystrophy and were shown in each case to have a subset of dystrophin gene exons duplicated. The origin of these duplications was traced to the single X chromosome of the maternal grandfathers, suggesting that an intrachromosomal event (unequal sister chromatid exchange) was involved in the formation of these duplications. In the present study, a DNA segment containing the duplication junction and the normal DNA that corresponds to both ends of the duplicated region have been cloned. Subsequent mapping studies confirmed the tandem arrangement (head to tail) of these duplications and revealed their sizes to be 130 kb, approximately 300 kb, and 35-80 kb, respectively. Sequence analysis of the duplication junctions showed that one duplication was due to homologous recombination between two repetitive elements (Alu sequences) and the other two were due to recombination between unrelated nonhomologous sequences. In the latter cases, the preferred cleavage sites of the eukaryotic type I and II DNA topoisomerases were found at the junctions of these duplications, suggesting a possible role of these enzymes in the chromatid exchange events. This study provides the first insight into the molecular basis of gene duplications formed through unequal sister chromatid exchange in humans.