Studies on apple protopectin. IV: Apple xyloglucans and influence of pectin extraction treatments on their solubility

Hemicelluloses were extracted from apple cell walls with 1 and 4 sodium hydroxide and 8 urea after depectinisation by a chelating agent, by a chelating agent and dilute sodium hydroxide or by a chelating agent and a pectin-lyase. The extracts were fractionated on Sephacryl S 500 and DEAE Sepharose CL-6B. The bulk of the hemicelluloses were solubilised by 4 sodium hydroxide. The main hemicellulose was a fucogalactoxyloglucan. Some low-molecular-weight mannans were also present. Part of the xyloglucans could be extracted by urea after pectin extraction by a chelating agent or by pectin-lyase but not after pectin extraction by dilute sodium hydroxide. Dilute sodium hydroxide probably insolubilised some of the pectins and hemicelluloses.     

Pretreatment of rapeseed straw by sodium hydroxide

Pretreatment method for rapeseed straw by sodium hydroxide was investigated for production of bioethanol and biobutanol. Various pretreatment parameters, including temperature, time, and sodium hydroxide concentration were optimized using a statistical method which is a central composite design of response surface methodology. In the case of sodium hydroxide pretreatment, optimal pretreatment conditions were found to be 7.9% sodium hydroxide concentration, 5.5 h of reaction time, and 68.4 °C of reaction temperature. The maximum glucose yield which can be recovered by enzymatic hydrolysis at the optimum conditions was 95.7% and the experimental result was 94.0 ± 4.8%. This experimental result was in agreement with the model prediction. An increase of surface area and pore size in pretreated rapeseed straw by sodium hydroxide pretreatment was observed by scanning electron microscope.     

60Co-γ射线辐照协同氢氧化钠预处理对油菜秸杆酶解产糖的影响

研究了辐照协同氢氧化钠预处理油菜秸秆对酶解产还原糖的影响。利用响应面法对氢氧化钠反应条件进行了优化,得出最优条件为氢氧化钠浓度为2．38％,反应温度为100℃,反应时间为0．5h。这一条件预期还原糖产量为524．93mg／g,通过实验验证,实际还原糖含量（528．51mg／g）能够很好地与预期相吻合。扫描电镜观察表明,辐照协同氢氧化钠预处理后秸秆表面积明显增大,出现很多蜂窝状孔洞结构,能够有效增大酶解可及表面积,从而提高酶解效率。     

The properties of enzyme-hydrolyzed cellulose in aqueous sodium hydroxide

Pure natural cellulose (softwood pulp) modified with cellulase is allowed to react with sodium hydroxide in a muller, and changes in structure and properties are investigated by FTIR and DSC. The reactivity of cellulose for some dissolving and derivatization processes is shown to be improved by an enzymatic hydrolysis and admixture with sodium hydroxide. The modified cellulose dissolved at 9% (wt) sodium hydroxide at -10 degrees C at 6% pulp consistency, while the DP of cellulose is >350.     

Selenium-induced enhancement of hematoporphyrin derivative phototoxicity in murine bladder tumor cells

The phototoxicity of hematoporphyrin derivative (Hpd) to murine bladder tumor (MBT-2) cells was studied in vitro. It was observed that selenium in the form of sodium selenite enhanced Hpd-sensitized photodamage in MBT-2 cells under conditions where selenite alone was non-toxic. Sodium selenite enhanced the fluorescence emission of Hpd and augmented the Hpd-sensitized photooxidation of tryptophan. The data suggest that sodium selenite is able to disaggregate Hpd, thereby enhancing Hpd-sensitized phototoxicity.     

Sugar production from agricultural woody wastes by saccharification with Trichoderma viride cellulase.

The saccharification of agricultural woody wastes was studied using a commercial enzyme preparation, Cellulase onozuka, derived from Trichoderma viride or the solid culture extracts of the fungus. With the intention of producing sugar at low cost, a simple procedure of enzymatic saccharification of rice straw, bagasse, and sawdust was studied. Delignifying methods of these wastes were investigated using dilute sodium hydroxide solution and dilute peracetic acid. Rice straw and bagasse were effectively delignified by boiling in a 1% sodium hydroxide solution for 3 hr or by autoclaving at 120 degrees C in a 1% sodium hydroxide solution for 1 hr. The sawdust from a broad leaved tree (Machilus thunbergii) was delignified by autoclaving at 120 degrees C in a 1% sodium hydroxide solution for 1 hr and by subsequent boiling in diluted 1/5 peracetic acid for 1 hr. This type of sawdust was also delignified by boiling in 1/5 peracetic acid for 1 hr and by subsequent autoclaving at 120 degrees C in a 1% sodium hydroxide solution for 1 hr. The sawdust from a coniferous tree (Cryptomeria japonica) was delignified by boiling in 1/5 peracetic acid for 1 hr and by subsequent autoclaving at 120 degrees C in a 1% sodium hydroxide solution for 1 hr; however, the successive treatment by autoclaving with alkali solution and subsequent boiling with diluted peracetic acid failed to bring about the desired effect. The saccharification of delignified rice straw, bagasse, and sawdust was examined using Cellulase onozuka, wheat bran or rice straw solid culture at various substrate concentrations, resulting in the formation of 5 to 10% sugar solutions after incubation at pH 5.0, 45 degrees C for 48 hr. The optimum substrate concentration existed at around 10%. Reuse of cellulase solution and resaccharification of residual sawdust were considered to be inadequate.     

氢氧化钠瘤内注射通过抗血管生成作用抑制肝癌生长的机制研究

目的：研究氢氧化钠溶液瘤内注射对肝癌的生长抑制作用并探索其机制。方法：对SMMU-LTNM肝癌裸鼠皮下模型进行2%浓度的氢氧化钠溶液瘤内注射,检测肿瘤组织微血管密度、HIF-1α和VEGF的表达情况。结果：与生理盐水瘤内注射组相比,氢氧化钠显著抑制肿瘤生长（P〈0.01）、降低肿瘤微血管密度（P=0.01）、抑制肿瘤组织HIF-1α和VEGF的表达（P=0.02和P=0.01）。结论：氢氧化钠瘤内注射可有效抑制肝癌生长,主要机制可能是抗血管生成作用。     

Rapeseed-straw enzymatic digestibility enhancement by sodium hydroxide treatment under ultrasound irradiation

In this study, we carried out sodium hydroxide and sonication pretreatments of rapeseed straw (Brassica napus) to obtain monosugar suitable for production of biofuels. To optimize the pretreatment conditions, we applied a statistical response-surface methodology. The optimal pretreatment conditions using sodium hydroxide under sonication irradiation were determined to be 75.0 °C, 7.0 % sodium hydroxide, and 6.8 h. For these conditions, we predicted 97.3 % enzymatic digestibility. In repeated experiments to validate the predicted value, 98.9 ± 0.3 % enzymatic digestibility was obtained, which was well within the range of the predicted model. Moreover, sonication irradiation was found to have a good effect on pretreatment in the lower temperature range and at all concentrations of sodium hydroxide. According to scanning electron microscopy images, the surface area and pore size of the pretreated rapeseed straw were modified by the sodium hydroxide pretreatment under sonication irradiation.     

Effect of ferric tartrate/sodium hydroxide solvent pretreatment on enzyme hydrolysis of cellulose in corn residue

Lignocellulose containing 62% cellulose was prepared from corn residue by dilute acid hydrolysis using 5% H(2)SO(4) at 90 degrees C. The lignocellulose was then treated with a cellulose solvent consisting of a ferric sodium tartrate complex in 1.5N sodium hydroxide at levels ranging from 4:1 to 12:1 (solvent volume: corn residue lignocellulose) or a 1.5N sodium hydroxide solution alone. Subsequent hydrolysis with cellulase enzymes from Trichoderma reesei gave cellulose conversions which were two to three times higher than untreated lignocellulose (30%) and approached 90% conversion after 24 h in the best cases. It was found that increasing cellulase enzyme levels from 3.74 lU/g lignocellulose to 7.71 lU/g lignocellulose increased cellulose conversion by 50% at all pretreatment conditions, while an increase from 7.71 to 10.1 lU/g gave only an additional 5-10% increase. Pretreatment with sodium hydroxide resulted in 5-25% lower conversions than observed for cellulose treated with the solvent, depending on enzyme levels and treatment levels. At high enzyme levels, sodium hydroxide pretreatment is almost as effective in enhancing cellulose conversion after 24 h as is pretreatment using the cellulose solvent.     

Arabinoxylan fractionation on DEAE-cellulose chromatography influenced by protease pre-treatment

An arabinoxylan mixture was extracted with saturated barium hydroxide from a water unextractable residue of rye bran. The mixture was fractionated on an anion exchange column which was eluted with water, 0.0025 M sodium borate, 0.025 M sodium borate and 0.4 M sodium hydroxide. It was possible to fractionate the arabinoxylan mixture into fractions with different structural features. The fractionation was repeated with prior protease treatment of the arabinoxylan mixture, but most of the arabinoxylan did not bind to the column by any mechanism that the protease treatment affected, As the largest fraction was still eluted with 0.4 M sodium hydroxide. Protease treatment affected the proportion of disubstituted xylose residues (dXyl) in the water, 0.0025 M sodium borate and 0.025 M sodium borate fractions, indicating that protein associated with arabinoxylans with a high dXyl content is more liable to the protease treatment or that protein is mainly associated with these structures. This study gives indications that protein is involved in the separation mechanism of rye arabinoxylan on a DEAE–cellulose column.     

Primary irritant reactions in the skin of the pika, Ochotona rufescens rufescens

The skin of the pika (Ochotona rufescens rufescens) was found to be remarkably sensitive to the primary irritation of sodium hydroxide, as compared with the skin of the rabbit. After exposure to 0.1 N sodium hydroxide for 24 hr, the pika skin showed severe erosion, ulceration and necrosis as well as crust formation and hyperkeratosis with vascular dilation, and cell infiltration. The changes appeared already within 1 hr after 1 N or 3 hr after 0.1 N sodium hydroxide application. After application of acetic acid, changes were apparent while less remarkable.     

The effect of hematoporphyrin and light on human platelets. II. Uptake of hematoporphyrin

A linear relationship was demonstrated between the reciprocals of the concentration of free hematoporphyrin and the moles of hematoporphyrin taken up by the platelet in the dark. radiated platelets took up more hematoporphyrin than did controls; this increase in uptake was accounted for by the movement of the dye across the damaged membrane of the cell. platelets irradiated at 4°c remained impermeable to hematoporphyrin until warmed to 37°c. during the initial three to four minutes of exposure to light at 37°c, there was no additional uptake of hematoporphyrin by platelets in comparison to controls. between six to ten minutes irradiation, the uptake of hematoporphyrin increased linearly with the log time of irradiation. thereafter, no further uptake occurred. a further increase in uptake of dye was demonstrated by both control and irradiated platelets at a reduced ph. this study enables a correlation to be made between the effects of hematoporphyrin on the platelet and the uptake of this agent by the platelet.     

The cytotoxic activity of hematoporphyrin: studies on the possible role of transition metals

Hematoporphyrin acquires a potent cytolytic activity toward erythrocytes when activated by visible light. Considerable evidence has been obtained suggesting that this toxic activity is mediated by certain active oxygen species, including singlet oxygen and hydroxyl radicals. These active oxygen species have also been proposed as intermediates in the toxic activity of peroxidases, hemin, and a variety of metal complexes. Unlike hematoporphyrin, all these compounds contain a liganded Fe atom, which appears to play a central role in the activation of molecular oxygen. In order to ascertain whether the generation of active oxygen by hematoporphyrin may also involve the participation of a metal ion we have compared the cytolytic activity of hematoporphyrin with that of hematoheme. The participation of a metal ion in the light-activated hematoporphyrin reaction was ruled out on the basis of four criteria: no increase in cytolytic activity was observed upon the addition of Fe or Cu ions; no evidence could be obtained for the incorporation of a metal ion into hematoporphyrin during light activation; hematoporphyrin is a more potent cytolytic agent than hematoheme on an equimolar basis; and the activities of the two cytolytic agents are affected differently by various activators and inhibitors of the toxic reaction. Our results further indicate that the mechanism of the cytolytic activity promoted by light-activated hematoporphyrin is distinctly different from that promoted by hematoheme in the presence of ascorbate. We conclude that the two cytolytic reactions are most likely propagated by two different forms of active oxygen.     

Studies on the chemical stability of propylene glycol alginate esters

The chemical stability of propylene glycol alginates (PGAs) has been examined. Under acidic conditions the ester groups in PGA are stable to hydrolysis but hydrolytic degradation of the glycosidic linkages in the polysaccharide backbone occurs. Under alkaline conditions the ester groups are hydrolysed with the primary 2-hydroxyprop-1-yl ester groups being more susceptible than secondary 1-hydroxyprop-2-yl ester groups, with little degradation of the polysaccharide backbone. Sodium carbonate-bicarbonate buffer was a much more effective hydrolysing reagent than sodium hydroxide at the same concentration and pH, and the rate of hydrolysis was greatly accelerated by increasing the hydrolysis temperature. Acetate, citrate and phosphate ions accelerated the rate of hydrolysis of the ester groups in PGA when added to the sodium hydroxide hydrolysing reagent. Hydrolysis of the ester groups in PGA with sodium hydroxide was unaffected by the addition of imidazole. However hydrolysis of the ester groups in PGA with sodium hydroxide in the presence of 1-aminobutane led to the formation of an alginate amide in which only the primary 2-hydroxylprop-1-yl ester groups were present, suggesting that a nucleophilic substitution of primary ester groups by amine groups is involved in the reaction.     

Assessing the impact of sanitization methods for regenerated cellulose ultrafiltration/diafiltration membrane on membrane integrity and protein quality

Ultrafiltration/diafiltration (UF/DF) is typically the final step in downstream processing of recombinant monoclonal antibody (mAb) products, which serves for protein concentration and buffer exchange. For UF/DF membranes composed of regenerated cellulose (RC), sanitization with 0.1 M sodium hydroxide is generally recommended by the supplier, but it may not be sufficient for reducing bioburden during large scale manufacturing. Therefore, more stringent sanitization methods for RC membranes are required. However, chemicals used in such sanitization step may disrupt membrane integrity, while the corresponding residuals may reduce product quality. Previous work has shown that high concentration of sodium hydroxide or addition of peracetic acid (PAA) can effectively reduce bioburden, but their effects on the RC membranes remain unknown. In this work, we assessed the impact of two sanitization methods, 0.5 M sodium hydroxide and 30 mM PAA in combination with 0.5 M sodium hydroxide, on membrane integrity and protein quality of Millipore and pall corporation (PALL) membranes. Both methods showed a similar impact as the control after performing 15 cycles. However, the addition of PAA may cause residual chemical concerns, therefore, 0.5 M sodium hydroxide was recommended as an effective and safe sanitization method for RC UF/DF membranes.     

Activation of hematoporphyrin in alternating magnetic field: possible implications for cancer treatment

A new mechanism of cell damage by alternating magnetic field with hematoporphyrin is described. C6 glioblastoma cell suspensions were exposed to an alternating magnetic field with frequency 180 kHz up to 60 min in the presence of hematoporphyrin in H2O and in D2O. The results presented suggest that an alternating magnetic field is able to activate hematoporphyrin, and this method may be a basis for cancer treatment.     

Alkaline modification of carrageenans. Part III. Use of mild alkaline media and high ionic strengths

The cyclization reaction (formation of 3,6-anhydro--d-galactose and 3,6-anhydro--d-galactose 2-sulfate units from -d-galactose 6-sulfate and 2,6-disulfate residues, respectively) of carrageenans follows a pseudo-first-order kinetics. This reaction can be carried out, at reasonable rates, in sodium hydroxide solutions less concentrated than those usually employed or by using a milder base such as sodium carbonate. Rate constants were also determined at a fixed sodium hydi oxide concentration but using different ionic strengths. No specific salt effects were observed at a given sodium hydroxide concentration and ionic strength.     

Histological preparation of implanted biomaterials for light microscopic evaluation of the implant-tissue interaction

A technique is presented for processing implanted biomaterials with surrounding soft tissue for histological assessment of the implant-tissue interaction. Specimens are removed with the implant-tissue interface intact, fixed in formalin, dehydrated in a graded series of ethanol followed by a graded series of acetone in ethanol, and embedded in Spurr's low viscosity epoxy resin. Sections 0.5-1.0 mm thick are cut from the cured blocks using a metallurigical saw with a diamond wafer blade. After being glued to glass microscope slides, they are ground and polished to approximately 75 microns in thickness. The polished sections are treated with 95% ethanol saturated with sodium hydroxide, stained with Gill's hematoxylin and counterstained in eosin Y-phloxine B. The sodium hydroxide solution degrades the resin, allowing the stain to penetrate the tissue. By limiting the time in sodium hydroxide, the depth of staining is controlled and one is able to simulate a thin paraffin section with high resolution of the implant-soft tissue interface.     

Performance of animals fed crop residues.

Ruminants can utilize crop residues as sources of energy, but productivity is low because of the high level of cell walls and lignin. Chemicals, especially sodium hydroxide, have been used to increase the digestibility of crop residues. Hemicellulose is solubilized and the extent and rate of cellulose and hemicellulose digestion are increased. Two systems have been developed for chemical treatment. The first involves pelleting finely ground residue in combination with sodium hydroxide treatment. A dense, easily transported feed-stuff is produced. The second method is an "on-the-farm" method that utilizes a minimum amount of equipment. In vitro and in vivo digestibilities have been increased from 10 to 20 percentage units by sodium hydroxide treatment. While lamb and cattle gains have generally been increased by feeding chemically treated residues, the level of performance often has not been as great as would be predicted from in vitro digestibilities. Sodium residues following chemical treatment have been shown to increase rate of passage from the rumen and reduce rumen fiber digestion. The use of alfalfa with sodium hydroxide-treated residues and the use of ammonium or calcium hydroxides for treatment have good potential.     

Formulation of Bacillus amyloliquefaciens B190 for Control of Lily Grey Mould (Botrytis elliptica)

Calcium hydroxide (0.1%) significantly increased the growth of Bacillus amyloliquefaciens B190, inhibited completely the germination of Botrytis elliptica, and decreased the disease severity caused by B. elliptica on lily. Spraying B. amyloliquefaciens B190 mixed with either 0.025% calcium hydroxide, 0.05% sodium carbonate or 0.025% ammonium nitrate decreased the grey mould disease on lily leaves. B. amyloliquefaciens B190 mixed with 0.025% calcium hydroxide and 0.05% sodium carbonate, or mixed with 0.025% calcium hydroxide and 0.025% ammonium nitrate controlled lily grey mould completely. When the concentration of tested adjuvants was below 0.1% (v/v), adhesive adjuvant, i.e. carboxymethyl cellulose and spreader, i.e. Tween 80 were equally effective to assist B. amyloliquefaciens B190 to control lily grey mould. Calcium hydroxide (0.025%) and 0.05% sodium carbonate mixed with 0.1% Tween 80 significantly controlled lily grey mould. B. amyloliquefaciens B190 mixed with 0.025% calcium hydroxide and 0.05% sodium carbonate, and these two chemicals plus or without 0.1% Tween 80 and 0.05% mineral oil (i.e. emulsion and wettable powder, respectively) was consistently able to control grey mould on lily as well as 100 p.p.m. flusilazole in greenhouse and field trials, respectively.