Purification and some properties of 1,3-1,4-beta-glucanase from Bacillus subtilis

Using chromatography on cellulose, SE-Sephadex G-50 and gel filtration on acrylex P-60, 1.3 -- 1.4-beta-glucanase from Bac. subtilis, strain 103 was obtained and purified 142-fold. The specific activity of the purified enzyme was 18.5 units per mg of protein. The homogeneity of 1.3 -- 1.4-beta-glucanase was determined by gel filtration on acrylex P-60, polyacrylamide gel electrophoresis, isoelectrofocusing and ultracentrifugation. Using electrophoresis in Na-SDS and gel filtration on acrylex P-60, the molecular weight of the enzyme was found to be equal to 30 000 and 33 000, respectively. The isoelectric point for the enzyme lies at pH 5.4. The enzyme does not contain tryptophane, free SH-groups or carbohydrates.     

Structural basis for the substrate specificity of a Bacillus 1,3-1,4-beta-glucanase

Depolymerization of polysaccharides is catalyzed by highly specific enzymes that promote hydrolysis of the scissile glycosidic bond by an activated water molecule. 1,3-1,4-beta-Glucanases selectively cleave beta-1,4 glycosidic bonds in 3-O-substituted glucopyranosyl units within polysaccharides with mixed linkage. The reaction follows a double-displacement mechanism by which the configuration of the anomeric C(1)-atom of the glucosyl unit in subsite -I is retained. Here we report the high-resolution crystal structure of the hybrid 1,3-1,4-beta-glucanase H(A16-M)(E105Q/E109Q) in complex with a beta-glucan tetrasaccharide. The structure shows four beta-d-glucosyl moieties bound to the substrate-binding cleft covering subsites -IV to -I, thus corresponding to the reaction product. The ten active-site residues Asn26, Glu63, Arg65, Phe92, Tyr94, Glu105, Asp107, Glu109, Asn182 and Trp184 form a network of hydrogen bonds and hydrophobic stacking interactions with the substrate. These residues were previously identified by mutational analysis as significant for stabilization of the enzyme-carbohydrate complex, with Glu105 and Glu109 being the catalytic residues. Compared to the Michaelis complex model, the tetrasaccharide moiety is slightly shifted toward that part of the cleft binding the non-reducing end of the substrate, but shows previously unanticipated strong stacking interactions with Phe92 in subsite -I. A number of specific hydrogen-bond contacts between the enzyme and the equatorial O(2), O(3) and O(6) hydroxyl groups of the glucosyl residues in subsites -I, -II and -III are the structural basis for the observed substrate specificity of 1,3-1,4-beta-glucanases. Kinetic analysis of enzyme variants with the all beta-1,3 linked polysaccharide laminarin identified key residues mediating substrate specificity in good agreement with the structural data. The comparison with structures of the apo-enzyme H(A16-M) and a covalent enzyme-inhibitor (E.I) complex, together with kinetic and mutagenesis data, yields new insights into the structural requirements for substrate binding and catalysis. A detailed view of enzyme-carbohydrate interactions is presented and mechanistic implications are discussed.     

Cloning and expression of an endo-1,3-1,4-beta-glucanase gene from Bacillus macerans in Lactobacillus reuteri.

Strains of the gastrointestinal species Lactobacillus reuteri were electrotransformed with plasmid constructs containing the endo-1,3-1,4-beta-glucanase gene (bglM) of Bacillus macerans. The enzyme was expressed and secreted by the lactobacilli. A plasmid construct containing the bglM gene lacking its promoter was derived and was demonstrated to be useful as a promoter probe vector.     

Glycosynthase activity of Bacillus licheniformis 1,3-1,4-beta-glucanase mutants: specificity, kinetics, and mechanism

Glycosynthases are engineered retaining glycosidases devoid of hydrolase activity that efficiently catalyze transglycosylation reactions. The mechanism of the glycosynthase reaction is probed with the E134A mutant of Bacillus licheniformis 1,3-1,4-beta-glucanase. This endo-glycosynthase is regiospecific for formation of a beta-1,4-glycosidic bond with alpha-glycosyl fluoride donors (laminaribiosyl as the minimal donor) and oligosaccharide acceptors containing glucose or xylose on the nonreducing end (aryl monosaccharides or oligosaccharides). The pH dependence of the glycosynthase activity reflects general base catalysis with a kinetic pK(a) of 5.2 +/- 0.1. Kinetics of enzyme inactivation by a water-soluble carbodiimide (EDC) are consistent with modification of an active site carboxylate group with a pK(a) of 5.3 +/- 0.2. The general base is Glu138 (the residue acting as the general acid-base in the parental wild-type enzyme) as probed by preparing the double mutant E134A/E138A. It is devoid of glycosynthase activity, but use of sodium azide as an acceptor not requiring general base catalysis yielded a beta-glycosyl azide product. The pK(a) of Glu138 (kinetic pK(a) on k(cat)/K(M) and pK(a) of EDC inactivation) for the E134A glycosynthase has dropped 1.8 pH units compared to the pK(a) values of the wild type, enabling the same residue to act as a general base in the glycosynthase enzyme. Kinetic parameters of the E134A glycosynthase-catalyzed condensation between Glcbeta4Glcbeta3GlcalphaF (2) as a donor and Glcbeta4Glcbeta-pNP (15) as an acceptor are as follows: k(cat) = 1.7 s(-)(1), K(M)(acceptor) = 11 mM, and K(M)(donor) < 0.3 mM. Donor self-condensation and elongation reactions are kinetically evaluated to establish the conditions for preparative use of the glycosynthase reaction in oligosaccharide synthesis. Yields are 70-90% with aryl monosaccharide and cellobioside acceptors, but 25-55% with laminaribiosides, the lower yields (and lower initial rates) due to competitive inhibition of the beta-1,3-linked disaccharide acceptor for the donor subsites of the enzyme.     

Insight into the molecular switch mechanism of human Rab5a from molecular dynamics simulations

Rab5a is currently a most interesting target because it is responsible for regulating the early endosome fusion in endocytosis and possibly the budding process. We utilized longtime-scale molecular dynamics simulations to investigate the internal motion of the wild-type Rab5a and its A30P mutant. It was observed that, after binding with GTP, the global flexibility of the two proteins is increasing, while the local flexibility in their sensitive sites (P-loop, switch I and II regions) is decreasing. Also, the mutation of Ala30 to Pro30 can cause notable flexibility variations in the sensitive sites. However, this kind of variations is dramatically reduced after binding with GTP. Such a remarkable feature is mainly caused by the water network rearrangements in the sensitive sites. These findings might be of use for revealing the profound mechanism of the displacements of Rab5a switch regions, as well as the mechanism of the GDP dissociation and GTP association.     

Purification and properties of an acid endo-1,4-beta-glucanase from Bacillus sp. KSM-330

A novel acid cellulase (endo-1,4-beta-glucanase, EC 3.2.1.4) was found in a culture of Bacillus sp. KSM-330 isolated from soil. One-step chromatography on a column of CM-Bio-Gel A yielded a homogeneous enzyme, as determined by silver staining of both sodium dodecyl sulphate (SDS) and nondenaturing gels. The enzyme had a molecular mass of 42 kDa, as determined by SDS-polyacrylamide gel electrophoresis. The isoelectric point was higher than pH 10. The N-terminal amino acid sequence of the enzyme was Val-Ala-Lys-Glu-Met-Lys-Pro-Phe-Pro-Gln-Gln-Val-Asn-Tyr-Ser-Gly-Ile-Leu- Lys-Pro . This enzyme had an optimum pH for activity of 5.2, being active over an extremely narrow range of pH values, from 4.2 to 6.9; below and above these pH values no activity was detectable. The optimum temperature at pH 5.2 was around 45 degrees C. The enzyme efficiently hydrolysed carboxymethylcellulose (CMC) and lichenan, but more crystalline forms of cellulose, curdlan, laminarin, 4-nitrophenyl-beta-D-glucopyranoside and 4-nitrophenyl-beta-D-cellobioside were barely hydrolysed. The enzymic activity was inhibited by Hg2+ but was not affected by other inhibitors of thiol enzymes, such as 4-chloromercuribenzoate. N-ethylmaleimide and monoiodoacetate. N-Bromosuccinimide abolished the enzymic activity, and CMC protected the enzyme from inactivation by this tryptophan-specific oxidant. It is suggested that a tryptophan residue(s) is involved in the mechanism of action of the Bacillus cellulase and that the inhibition of enzymic activity by Hg2+ is ascribable to interactions with the tryptophan residue(s) rather than with thiol group(s).     

Enzymatic hydrolysis of 1,3-1,4-beta-glucosyl oligosaccharides by 1,3-1,4-beta-glucanase from Synechocystis PCC6803: a comparison with assays using polymer and chromophoric oligosaccharide substrates

The specificity of 1,3-1,4-β-glucanase from Synechocystis PCC6803 (SsGlc) was investigated using novel substrates 1,3-1,4-β-glucosyl oligosaccharides, in which 1,3- and 1,4-linkages are located in various arrangements. After the enzymatic reaction, the reaction products were separated and determined by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). As a result, SsGlc was found to hydrolyze the pentasaccharides, which possess three contiguous 1,4-β-glycosidic linkages (cellotetraose sequence) adjacent to 1,3-β-linkage, but none of the other oligosaccharides were hydrolyzed. To further analyze the specificity, kinetic measurements were performed using polymeric substrates and 4-methylumbelliferyl derivatives of laminaribiose and cellobiose (1,3-β-(Glc)₂-MU and 1,4-β-(Glc)₂-MU). The k_cat/K_m value obtained for barley β-glucan was considerably larger than that for lichenan, indicating that SsGlc prefers 1,3-1,4-β-glucan possessing a larger amount of cellotetraose sequence. This is consistent with the data obtained for 1,3-1,4-β-glucosyl oligosaccharides. However, the k_cat/K_m value obtained for 1,4-β-(Glc)₂-MU was considerably lower than that for 1,3-β-(Glc)₂-MU, suggesting inconsistency with the data obtained from the other natural substrates. It is likely that the kinetic data obtained from such chromophoric substrates do not always reflect the true enzymatic properties.     

Insight into the mechanism of inactivation and pH sensitivity in potassium channels from molecular dynamics simulations

Potassium (K (+)) channels can regulate ionic conduction through their pore by a mechanism, involving the selectivity filter, known as C-type inactivation. This process is rapid in the hERG K (+) channel and is fundamental to its physiological role. Although mutations within hERG are known to remove this process, a structural basis for the inactivation mechanism has yet to be characterized. Using MD simulations based on homology modeling, we observe that the carbonyl of the filter aromatic, Phe627, forming the S 0 K (+) binding site, swiftly rotates away from the conduction axis in the wild-type channel. In contrast, in well-characterized non-inactivating mutant channels, this conformational change occurs less frequently. In the non-inactivating channels, interactions with a water molecule located behind the selectivity filter are critical to the enhanced stability of the conducting state. We observe comparable conformational changes in the acid sensitive TASK-1 channel and propose a common mechanism in these channels for regulating efflux of K (+) ions through the selectivity filter.     

Crystal structure of truncated Fibrobacter succinogenes 1,3-1,4-beta-D-glucanase in complex with beta-1,3-1,4-cellotriose

Fibrobacter succinogenes 1,3-1,4-beta-D-glucanase (Fsbeta-glucanase) catalyzes the specific hydrolysis of beta-1,4 glycosidic bonds adjacent to beta-1,3 linkages in beta-D-glucans or lichenan. This is the first report to elucidate the crystal structure of a truncated Fsbeta-glucanase (TFsbeta-glucanase) in complex with beta-1,3-1,4-cellotriose, a major product of the enzyme reaction. The crystal structures, at a resolution of 2.3 angstroms, reveal that the overall fold of TFsbeta-glucanase remains virtually unchanged upon sugar binding. The enzyme accommodates five glucose residues, forming a concave active cleft. The beta-1,3-1,4-cellotriose with subsites -3 to -1 bound to the active cleft of TFsbeta-glucanase with its reducing end subsite -1 close to the key catalytic residues Glu56 and Glu60. All three subsites of the beta-1,3-1,4-cellotriose adopted a relaxed C(1)4 conformation, with a beta-1,3 glycosidic linkage between subsites -2 and -1, and a beta-1,4 glycosidic linkage between subsites -3 and -2. On the basis of the enzyme-product complex structure observed in this study, a catalytic mechanism and substrate binding conformation of the active site of TFsbeta-glucanase is proposed.     

Insight into the mechanism of the IMP-1 metallo-beta-lactamase by molecular dynamics simulations

Two models, a purely nonbonded model and a cationic dummy atom approach, were examined for the modeling of the binuclear zinc-containing IMP-1 metallo-beta-lactamase in complex with a mercaptocarboxylate inhibitor. The cationic dummy atom approach had substantial advantages as it maintained the initial, experimentally determined geometry of the metal-containing active site during molecular dynamics simulations in water. The method was extended to the modeling of the free enzyme and the enzyme in complex with a cephalosporin substrate docked in an intermediate structure. For all three systems, the modeled complexes and the tetrahedral coordination of the zinc ions were stable. The average zinc-zinc distance increased by approximately 1 A in the substrate complex compared with the inhibitor complex and the free enzyme in which a hydroxide ion acts as a bridging ligand. Thus, the zinc ions are predicted to undergo a back and forth movement upon the cycle of hydrolysis. In contrast to previous assumptions, no interaction of the Asn167 side chain with the bound cephalosporin substrate was observed. Our observations are in agreement with quantum-mechanical calculations and experimental data and indicate that the cationic dummy atom approach is useful to model zinc-containing metallo-beta-lactamases as free proteins, in complex with inhibitors and in complex with substrates.     

Molecular cloning and nucleotide sequence of the gene encoding an endo-1,4-beta-glucanase from Bacillus sp. KSM-330.

The gene encoding an acid endo-1,4-beta-glucanase from Bacillus sp. KSM-330 was cloned into the HindIII site of pBR322 and expressed in Escherichia coli HB101. The recombinant plasmid contained a 3.1 kb HindIII insert, 1.8 kb of which was sufficient for the expression of endoglucanase activity in E. coli HB101. Nucleotide sequencing of this region (1816 bp) revealed an open reading frame of 1389 bp. The protein deduced from this sequence was composed of 463 amino acids with an Mr of 51882. The deduced amino acid sequence from amino acids 56 through 75 coincided with the amino-terminal sequence of the endoglucanase, Endo-K, purified from culture of Bacillus sp. KSM-330. The deduced amino acid sequence of Endo-K had 30% homology with that of the celA enzyme from Clostridium thermocellum NCIB 10682 and 25% homology with that of the enzyme from Cellulomonas uda CB4. However, the Endo-K protein exhibited no homology with respect to either the nucleotide or the amino acid sequences of other endoglucanases from Bacillus that had been previously characterized. These results indicate that the gene for Endo-K in Bacillus sp. KSM-330 has evolved from an ancestral gene distinct from that of other Bacillus endoglucanases.     

Towards an understanding of complex biological membranes from atomistic molecular dynamics simulations

Computer simulation has emerged as a powerful tool for studying the structural and functional properties of complex biological membranes. In the last few years, the use of recently developed simulation methodologies and current generation force fields has permitted novel applications of molecular dynamics simulations, which have enhanced our understanding of the different physical processes governing biomembrane structure and dynamics. This review focuses on frontier areas of research with important biomedical applications. We have paid special attention to polyunsaturated lipids, membrane proteins and ion channels, surfactant additives in membranes, and lipid–DNA gene transfer complexes.     

Endo-1,3;1,4-beta-glucanase from coleoptiles of rice and maize: role in the regulation of plant growth

The Matrix Polymer Hydrolysis Model for regulation of growth in plants is based on the simultaneous hydrolysis and incorporation of new glucans into the cell wall observed in growing plant tissues. The inhibition of growth in rice coleoptile tissues treated with glucanase antibodies confirms similar results observed previously in maize coleoptiles and provides direct evidence for a role of glucanase in control of plant growth. Analysis of two-maize coleoptile endo-glucanase ESTs shows that these sequences are not related to any other previously known family of glycosyl hydrolase. Thus, the coleoptile endo-glucanase enzyme should be classified as a new enzyme group (E.C. 3.2.1.xx). These discoveries enable new initiatives for further investigation of the glucanase role in control of plant growth.     

Crystallization of the exo(1,3)-beta-glucanase from Candida albicans.

An exoglucanase, with specificity for beta (1,3) linkages, from the cell wall of Candida albicans has been crystallized by the hanging drop method in the presence of polyethylene glycol 8000. The crystals, which diffract to better than 1.9 A resolution, belong to the orthorhombic space group P212121 with cell constants a = 60.2 A, b = 65.2 A, c = 96.5 A and with one molecule in the asymmetric unit.     

Insight into the early stages of thermal unfolding of peanut agglutinin by molecular dynamics simulations

Peanut agglutinin is a homotetrameric nonglycosylated protein. The protein has a unique open quaternary structure. Molecular dynamics simulations have been employed to follow the atomistic details of its unfolding at different temperatures. The early events of the deoligomerization of the protein have been elucidated in the present study. Simulation trajectories of the monomer as well as those of the tetramer have been compared and the tetramer is found to be substantially more stable than its monomeric counterpart. The tetramer shows retention of most of its secondary structure but considerable loss of the tertiary structure at high temperature. This observation implies the generation of a molten globule-like intermediate in the later stages of deoligomerization. The quaternary structure of the protein has weakened to a large extent, but none of the subunits are separated. In addition, the importance of the metal-binding to the stability of the protein structure has also been investigated. Binding of the metal ions not only enhances the local stability of the metal-ion binding loop, but also imparts a global stability to the overall structure. The dynamics of different interfaces vary significantly as probed through interface clusters. The differences are substantially enhanced at higher temperatures. The dynamics and the stability of the interfaces have been captured mainly by cluster analysis, which has provided detailed information on the thermal deoligomerization of the protein.     

Substrate binding and catalytic mechanism in phospholipase C from Bacillus Cereus: A molecular mechanics and molecular dynamics study

For the first time a consistent catalytic mechanism of phospholipase C from Bacillus cereus is reported based on molecular mechanics calculations. We have identified the position of the nucleophilic water molecule, which is directly involved in the hydrolysis of the natural substrate, phosphatidylcholine, in phospholipase C. This catalytically essential water molecule, after being activated by an acidic residue (Asp55), performs the nucleophilic attack on the phosphorus atom in the substrate, leading to a trigonal bipyramidal pentacoordinated intermediate (and structurally similar transition state). The subsequent collapse of the intermediate, regeneration of the enzyme, and release of the products has to involve a not yet identified second water molecule. The catalytic mechanism reported here is based on a series of molecular mechanics calculations. First, the x-ray structure of phospholipase C from B. cereus including a docked substrate molecule was subjected to a stepwise molecular mechanics energy minimization. Second, the location of the nucleophilic water molecule in the active site of the fully relaxed enzyme–substrate complex was determined by evaluation of nonbonded interaction energies between the complex and a water molecule. The nucleophilic water molecule is positioned at a distance (3.8 Å) from the phosphorus atom in the substrate, which is in good agreement with experimentally observed distances. Finally, the stability of the complex between phospholipase C, the substrate, and the nucleophilic water molecule was verified during a 100 ps molecular dynamics simulation. During the simulation the substrate undergoes a conformational change, but retains its localization in the active site. The contacts between the enzyme, the substrate, and the nucleophilic water molecule display some fluctuations, but remain within reasonable limits, thereby confirming the stability of the enzyme–substrate–water complex. The protocol developed for energy minimization of phospholipase C containing three zinc ions located closely together at the bottom of the active site cleft is reported in detail. In order to handle the strong electrostatic interactions in the active site realistically during energy minimization, delocalization of the charges from the three zinc ions was considered. Therefore, quantum mechanics calculations on the zinc ions and the zinc-coordinating residues were carried out prior to the molecular mechanics calculations, and two different sets of partial atomic charges (MNDO-Mulliken and AM1-ESP) were applied. After careful assignment of partial atomic charges, a complete energy minimization of the protein was carried out by a stepwise procedure without explicit solvent molecules. Energy minimization with either set of charges yielded structures, which were very similar both to the x-ray structure and to each other, although using AM1-ESP partial atomic charges and a dielectric constant of 4, yielded the best protein structure. © 1997 John Wiley and Sons, Inc. Biopoly 42: 319–336, 1997     

Insight into the binding mode of a novel LSD1 inhibitor by molecular docking and molecular dynamics simulations

Abstract

Lysine-specific demethylase (LSD1) is an important enzyme for histone lysine methylation. Downregulated LSD1 expression has been linked to cancer proliferation, migration and invasion, indicating that it is an important target for anti-cancer medication. In the present study, the binding modes of a recent reported new series of LSD1 inhibitor were analyzed by using molecular docking and molecular dynamics simulations. A binding mode of these inhibitors was proposed based on the results. According to this binding mode, Thr628 can form two important hydrogen bonds with these inhibitors. Moreover, if the inhibitors can form an additional hydrogen bond with hydroxyl group of Ser289, the potency of the inhibitor can be greatly improved, such as the best inhibitor (compound 12d) in this series. Hydrophobic interactions between the inhibitors and LSD1 are also key contributor here, such as the interaction between the hydrophobic groups (benzene rings) of the inhibitors and the hydrophobic residues of LSD1 (including Val288, Val317, Val811, Ala814, Leu659, Trp751 and Tyr761). Based on the results and analysis, it may provide some useful information for future novel LSD1 inhibitor design.     

Mapping of the gene for endo-β-1,3-1,4-glucanase of Bacillus subtilis

Abstract An integrating plasmid has been used to mutagenise the gene coding for endo-β-1,3-1,4-glucanase of Bacillus subtilis . The gene, named bgl , has been mapped by PBS-1 transduction to the sacA-pureA region of the B. subtilis chromosome and is closely linked to the hutP 1 locus. The order of markers in this region is sacA 321- thiC 5- bgl - hutP 1- purA 16.     

Synthesis and secretion of a Bacillus circulans WL-12 1,3-1,4-beta-D-glucanase in Escherichia coli.

The synthesis and secretion of a 1,3-1,4-beta-D-glucanase were studied in different strains of Escherichia coli transformed with plasmids carrying the Bacillus circulans WL-12 1,3-1,4-beta-D-glucanase structural gene. This gene (named BGC) is contained within a 1.9-kilobase BamHI-HindIII fragment and directs the synthesis in E. coli of an enzyme that specifically degrades lichenan. Only one active form of the enzyme was found when the gene was expressed in different E. coli strains. The electrophoretic pattern of this protein showed a molecular weight that was approximately the same as that of the mature beta-glucanase secreted from B. circulans WL-12, suggesting that the processing of this protein may be similar in both species. As deduced from maxicell experiments, the Bacillus parental promoter directs the synthesis in E. coli. Pulse-chase experiments showed that the protein may be cotranslationally processed.