Synthesis of peptide aldehydes via enzymatic acylation of amino aldehyde derivatives

Two ways for semi-enzymatic preparation of the peptide aldehydes are proposed: (1) enzymatic acylation of amino alcohols with acyl peptide esters and subsequent chemical oxidation of the resulting peptide alcohols with DMSO/acetic anhydride mixture or (2) enzymatic acylation of the preliminarily obtained by a chemical route amino aldehyde semicarbazones. Subtilisin 72, serine proteinase with a broad specificity, distributed over macroporous silica, was used as a catalyst in both cases. Due to the practical absence of water in the reaction mixtures the yields of the products in both enzymatic reactions were nearly quantitative. The second way seems to be more attractive because all chemical stages were carried out with amino acid derivatives, far less valuable compounds than peptide ones. A series of peptide aldehydes of general formula Z-Ala-Ala-Xaa-al (where Xaa-al=leucinal, phenylalaninal, alaninal, valinal) was obtained. The inhibition parameters for these compounds, in the hydrolysis reactions of corresponding chromogenic substrates for subtilisin and -chymotrypsin, were determined.     

Polymer-bound alkyltriazenes for mild racemization-free esterification of amino acid and peptide derivatives.

A novel tool for polymer-assisted solution phase (PASP) esterification of amino acid and peptide derivatives has been developed. When treated with carboxylic acids, polymer-bound alkyltriazenes react with a loss of nitrogen and transfer of the alkyl moiety to the carboxylate anion to form the corresponding alkyl esters. There are no limitations with regard to either the protecting groups or the nature of the amino acid. Furthermore no racemization occurs at the chiral centers of the amino acids as demonstrated by chiral GC-MS analyses. Alkyltriazene-resins were also applied successfully to the esterification of peptide acids and other peptidic structures, such as tripalmitoyl-S-glyceryl-cysteine (Pam3Cys). The triazene-mediated esterification reaction is exceptionally mild, and there is no need for prior activation of the carboxy groups. This method is therefore particularly suitable for the alkylation of complex peptidomimetic structures prone to racemization and for acid-sensitive structures.     

Backbone amide linker (BAL) strategy for Nalpha-9-fluorenylmethoxycarbonyl (Fmoc) solid-phase synthesis of peptide aldehydes.

A rapid and efficient strategy has been developed for the general synthesis of complex peptide aldehydes. N(alpha)-Benzyloxycarbonylamino acids were converted to protected aldehyde building blocks for solid-phase synthesis in four steps and moderate overall yields. The aldehydes were protected as 1,3-dioxolanes except for one case where a dimethyl acetal was used. These protected amino aldehyde monomers were then incorporated onto 5-[(2 or 4)-formyl-3,5-dimethoxyphenoxy]butyryl-resin (BAL-PEG-PS) by reductive amination, following which the penultimate residue was introduced by HATU-mediated acylation. The resultant resin-bound dipeptide unit, anchored by a backbone amide linkage (BAL), was extended further by routine Fmoc chemistry procedures. Several model peptide aldehydes were prepared in good yields and purities. Some epimerization of the C-terminal residue occurred (10% to 25%), due to the intrinsic stereolability conferred by the aldehyde functional group, rather than any drawbacks to the synthesis procedure.     

A Dde resin based strategy for inverse solid-phase synthesis of amino terminated peptides, peptide mimetics and protected peptide intermediates.

This report describes a Dde resin based attachment strategy for inverse solid-phase peptide synthesis (ISPPS). This attachment strategy can be used for the synthesis of amino terminated peptides with side chains and the carboxyl terminus either protected or deprotected. Amino acid t-butyl esters were attached through their free amino group to the Dde resin. The t-butyl carboxyl protecting group was removed by 50% TFA, and inverse peptide synthesis cycles performed using an HATU/TMP based coupling method. Protected peptides were cleaved from the resin with dilute hydrazine. Side chain protecting groups could then be removed by treatment with TFMSA/TFA. The potential of this approach was demonstrated by the synthesis of several short protected and unprotected peptides in good yield and with low epimerization. Its potential for peptide mimetic synthesis was demonstrated by the synthesis of two peptide trifluoromethylketones.     

Solid‐phase synthesis and screening of a library of C‐terminal arginine peptide aldehydes against Murray Valley encephalitis virus protease

Murray Valley encephalitis virus is a member of the flavivirus group, a large family of single‐stranded RNA viruses, which cause serious disease in all regions of the world. Unfortunately, no suitable antivirals are available, and there are commercial vaccines for only three flaviviruses. The solid‐phase synthesis of a library of 400 C‐terminal arginine peptide aldehydes and their screening against Murray Valley encephalitis virus protease are demonstrated. The library was utilised to elucidate several tripeptide sequences that can be used as inhibitors in further SAR studies. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Apolipoprotein A‐I peptide models as probes to formulate potential inhibitors of the low‐density lipoprotein oxidation

Apolipoprotein A‐I (apoA‐I), which constitutes the principal protein component of high‐density lipoprotein, is responsible for its major antiatherogenic functions. Aiming at contributing to the development of potent inhibitors of low‐density lipoprotein (LDL) peptide models of helices 4,6 and 9,10 of apoA‐I were designed and synthesized. Specific amino acid substitutions, resulting in transformation of the original helix class A and Y to G according to the Schiffer and Edmundson helical wheel representation, were introduced in order to validate the contribution of these modifications in the inhibitory activity of the synthesized peptide models against the LDL oxidation. The role of Met at positions 112 (helix 4) and 148 (helix 6) as oxidant scavenger was also investigated. The helical characteristics of all the peptide models were studied by CD in membrane‐mimicking microenvironments and compared with the original helices. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Hydrophobic benzyl amines as supports for liquid‐phase C‐terminal amidated peptide synthesis: application to the preparation of ABT‐510

C‐terminal amidation is one of the most common modification of peptides and frequently found in bioactive peptides. However, the C‐terminal modification must be creative, because current chemical synthetic techniques of peptides are dominated by the use of C‐terminal protecting supports. Therefore, it must be carried out after the removal of such supports, complicating reaction work‐up and product isolation. In this context, hydrophobic benzyl amines were successfully added to the growing toolbox of soluble tag‐assisted liquid‐phase peptide synthesis as supports, leading to the total synthesis of ABT‐510 ( 2 ). Although an ethyl amide‐forming type was used in the present work, different types of hydrophobic benzyl amines could also be simply designed and prepared through versatile reductive aminations in one step. The standard acidic treatment used in the final deprotection step for peptide synthesis gave the desired C‐terminal secondary amidated peptide with no epimerization. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Study of the effect of the peptide loading and solvent system in SPPS by HRMAS-NMR.

The SPPS methodology has continuously been investigated as a valuable model to monitor the solvation properties of polymeric materials. In this connection, the present work applied HRMAS-NMR spectroscopy to examine the dynamics of an aggregating peptide sequence attached to a resin core with varying peptide loading (up to 80%) and solvent system. Low and high substituted BHAR were used for assembling the VQAAIDYING sequence and some of its minor fragments. The HRMAS-NMR results were in agreement with the swelling of each resin, i.e. there was an improved resolution of resonance peaks in the better solvated conditions. Moreover, the peptide loading and the attached peptide sequence also affected the spectra. Strong peptide chain aggregation was observed mainly in highly peptide loaded resins when solvated in CDCl3. Conversely, due to the better swelling of these highly loaded resins in DMSO, improved NMR spectra were acquired in this polar aprotic solvent, thus enabling the detection of relevant sequence-dependent conformational alterations. The more prominent aggregation was displayed by the VQAAIDYING segment and not by any of its intermediary fragments and these findings were also corroborated by EPR studies of these peptide-resins labelled properly with an amino acid-type spin probe.     

Efficient methodology for the cyclization of linear peptide libraries via intramolecular S-alkylation using Multipin solid phase peptide synthesis.

Methodology is described here for the efficient parallel synthesis and cyclization of linear peptide libraries using intramolecular S-alkylation chemistry in combination with Multipin solid phase peptide synthesis (Multipin SPPS). The effective use of this methodology was demonstrated with the synthesis of a 72-member combinatorial library of cyclic thioether peptide derivatives of the conserved four-residue structural motif DD/EXK found in the active sites of the five crystallographically defined orthodox type II restriction endonucleases, EcoRV, EcoRI, PvuII, BamHI and BglI.     

Epitope mapping of anti‐myelin oligodendrocyte glycoprotein (MOG) antibodies in a mouse model of multiple sclerosis: microwave‐assisted synthesis of the peptide antigens and ELISA screening

The role of pathologic auto‐antibodies against myelin oligodendrocyte glycoprotein (MOG) in multiple sclerosis is a highly controversial matter. As the use of animal models may enable to unravel the molecular mechanisms of the human disorder, numerous studies on multiple sclerosis are carried out using experimental autoimmune encephalomyelitis (EAE). In particular, the most extensively used EAE model is obtained by immunizing C57BL/6 mice with the immunodominant peptide MOG(35–55). In this scenario, we analyzed the anti‐MOG antibody response in this model using the recombinant refolded extracellular domain of the protein, MOG(1–117). To assess the presence of a B‐cell intramolecular epitope spreading mechanism, we tested also five synthetic peptides mapping the 1–117 sequence of MOG, including MOG(35–55). For this purpose, we cloned, expressed in Escherichia coli and on‐column refolded MOG(1–117), and we applied an optimized microwave‐assisted solid‐phase synthetic strategy to obtain the designed peptide sequences. Subsequently, we set up a solid‐phase immunoenzymatic assay testing both naïve and EAE mice sera and using MOG protein and peptides as antigenic probes. The results obtained disclose an intense IgG antibody response against both the recombinant protein and the immunizing peptide, while no response was observed against the other synthetic fragments, thus excluding the presence of an intramolecular epitope spreading mechanism. Furthermore, as the properly refolded recombinant probe is able to bind antibodies with greater efficiency compared with MOG(35–55), we hypothesize the presence of both linear and conformational epitopes on MOG(35–55) sequence. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Liquid-phase peptide synthesis on polyethylene glycol (PEG) supports using strategies based on the 9-fluorenylmethoxycarbonyl amino protecting group: application of PEGylated peptides in biochemical assays.

Stepwise synthetic assembly of polypeptide chains reversibly linked to polyethylene glycol represents a hybrid between traditional solution and solid-phase chemistries and combines the inherent advantages of both approaches. The technical simplicity and scalability of the liquid-phase peptide synthesis method renders it particularly attractive for multiple parallel syntheses, combinatorial approaches and the large-scale preparation of peptides. The versatile protection strategy based on the N alpha-fluorenylmethoxycarbonyl group commonly used in solid-phase peptide synthesis was adapted to the liquid-phase approach. Fluoride ions were used rather than the conventional organic base piperidine for the repetitive amino-deprotection step. Using a range of acid- and base-labile linkers between the polymer and the peptide, it was shown that free and fully side-chain protected peptides can be obtained using our version of the liquid-phase peptide synthesis method. Protocols for simultaneous multiple syntheses requiring a minimum of equipment are presented and the use of polyethylene glycol-bound peptides in biochemical binding and functional assay systems is demonstrated.     

Combining a polar resin and a pseudo-proline to optimize the solid-phase synthesis of a 'difficult sequence'.

This paper describes the optimization of a synthesis of a difficult sequence related to a 12-mer sequence of a Pan DR epitope (PADRE). Elongation was followed by on-line monitoring of the N(alpha)-Fmoc removal adapted for the batch methodology. Studying the intrinsic factors related to the peptide-resin, such as substitution level, resin nature and backbone protecting group, has led to an increase in the elongation yield and purity of the crude peptide. Optimal elongation was obtained by combining a polar resin such as PEGA and a pseudo-proline as the backbone protecting group.     

Easy parallel screening of reagent stability,quality control,and metrology in solid phase peptide synthesis (SPPS) and peptide couplings for microarrays

Evaluating the stability of coupling reagents, quality control (QC), and surface functionalization metrology are all critical to the production of high quality peptide microarrays. We describe a broadly applicable screening technique for evaluating the fidelity of solid phase peptide synthesis (SPPS), the stability of activation/coupling reagents, and a microarray surface metrology tool. This technique was used to assess the stability of the activation reagent 1‐{[1‐(Cyano‐2‐ethoxy‐2‐oxo‐ethylidenaminooxy)dimethylamino‐morpholinomethylene]}methaneaminiumHexafluorophosphate (COMU) (Sigma‐Aldrich, St. Louis, MO, USA) by SPPS of Leu‐Enkephalin (YGGFL) or the coupling of commercially synthesized YGGFL peptides to (3‐aminopropyl)triethyoxysilane‐modified glass surfaces. Coupling efficiency was quantitated by fluorescence signaling based on immunoreactivity of the YGGFL motif. It was concluded that COMU solutions should be prepared fresh and used within 5 h when stored at ~23 °C and not beyond 24 h if stored refrigerated, both in closed containers. Caveats to gauging COMU stability by absorption spectroscopy are discussed. Commercial YGGFL peptides needed independent QC, due to immunoreactivity variations for the same sequence synthesized by different vendors. This technique is useful in evaluating the stability of other activation/coupling reagents besides COMU and as a metrology tool for SPPS and peptide microarrays. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Characterization of beta-turn and Asx-turns mimicry in a model peptide: stabilization via C--H . . . O interaction

The chemical synthesis and single-crystal X-ray diffraction analysis of a model peptide, Boc-Thr-Thr-NH2 (1) comprised of proteinogenic residues bearing an amphiphilic Cbeta -stereogenic center, has been described. Interestingly, the analysis of its molecular structure revealed the existence of a distinct conformation that mimics a typical beta-turn and Asx-turns, i.e., the two Thr residues occupy the left- and right-corner positions. The main-chain torsion angles of the N- and C-terminal residues i.e., semiextended: phi = -68.9 degrees , psi = 128.6 degrees ; semifolded: phi = -138.1 degrees , psi = 2.5 degrees conformations, respectively, in conjunction with a gauche- disposition of the obligatory C-terminus Thr CgammaH3 group, characterize the occurrence of the newly described beta-turn- and Asx-turns-like topology. The preferred molecular structure is suggested to be stabilized by an effective nonconventional main-chain to side-chain Ci=O . . . H--Cgamma(i+2)-type intraturn hydrogen bond. Noteworthy, the observed topology of the resulting 10-membered hydrogen-bonded ring is essentially similar to the one perceived for a classical beta-turn and the Asx-turns, stabilized by a conventional intraturn hydrogen bond. Considering the signs as well as magnitudes of the backbone torsion angles and the orientation of the central peptide bond, the overall mimicked topology resembles the type II beta-turn or type II Asx-turns. An analysis of Xaa-Thr sequences in high-resolution X-ray elucidated protein structures revealed the novel topology prevalence in functional proteins (unpublished). In view of indubitable structural as well as functional importance of nonconventional interactions in bioorganic and biomacromolecules, we intend to highlight the participation of Thr CgammaH in the creation of a short-range C=O . . . H--Cgamma -type interaction in peptides and proteins.     

Assessing the correlation of microscopy‐based and volumetry‐based measurements for resin swelling in a range of potential greener solvents for SPPS

The degree of resin swelling in a particular solvent system is one of the critical parameters for solid‐phase peptide synthesis (SPPS) and for solid‐phase synthesis in general. Methods used for measuring the degree of resin swelling include microscopy‐based and volumetry‐based methods. This study describes and compares the use of both methods for a number of commercially available resins commonly used in SPPS, with a range of solvents, which have been identified in the literature as ‘greener’ than DCM, DMF and NMP. The results were analysed by statistical methods, and a significant correlation between the two distinct methods has been demonstrated for the first time. The results will likely be used, in conjunction with other literature methods, to help in choosing both the resin and solvent system for greener SPPS, as well as for continuous flow SPPS, which is of growing importance.     

Design, synthesis and pharmacological evaluation of cyclic mimetics of the insulin-like peptide 3 (INSL3) B-chain.

Insulin-like peptide 3 (INSL3) is a peptide hormone belonging to the relaxin-insulin superfamily of peptides that plays important roles in testes descent, oocyte maturation and the control of male germ cell apoptosis. These actions are mediated via a specific G-protein coupled receptor, LGR8. Previous structure-activity studies have shown that the key binding site of INSL3 is situated within its B-chain. Recent studies in our laboratory have led to the identification of a cyclic peptide mimetic 2 of the INSL3 B-chain, which we have shown to compete with the binding of [33P]-relaxin to LGR8 expressed in HEK293T cells, and to inhibit cAMP-mediated signaling in these cells, i.e. it is an antagonist of INSL3. In order to further define the structure-activity relationships of cyclic analogues of the INSL3 B-chain, we used a structure-based approach to design a series of cyclic, disulfide-constrained INSL3 B-chain mimetics. To do this, we first created a model of the 3D structure of INSL3 using the crystal structure of human relaxin as a template. This model of INSL3 was then used as a template to design a series of disulfide-constrained mimetics of the INSL3 B-chain. The peptides were synthesized by solid-phase peptide synthesis using pseudoproline dipeptides to improve the synthesis outcome. Of the seven prepared INSL3 B-chain mimetics, three compounds were found to have partial displacement activity, while four were able to completely displace [33P]-relaxin from LGR8, including compounds that were markedly shorter than compound 2. The best of these, mimetic 6, showed significantly greater affinity for LGR8 than compound 2, but still displayed around 1000-fold less affinity for LGR8 than native INSL3. Analysis of selected mimetics for their alpha-helical content using circular dichroism (CD) spectroscopy revealed that, generally, the mimetics showed less than expected helicity. The inability of the compounds to display true native INSL3 structure is likely contributing to their reduced receptor binding affinity. We are currently examining alternative INSL3 B-chain mimetics that might better present key receptor binding residues in the native INSL3-like conformation.     

The interaction of the cell-penetrating peptide penetratin with heparin, heparansulfates and phospholipid vesicles investigated by ESR spectroscopy.

An ESR investigation of the interaction of spin-labelled penetratin with heparin, heparansulfates and several phospholipid vesicle formulations is reported. Penetratin is a 16-aa peptide corresponding to the third helix of the Antennapedia homeodomain and belonging to the cell-penetrating peptide family. The present study shows that ESR spectroscopy can provide specific and reliable information about the mechanism of interaction of penetratin with polysaccharides and lipids, at a molecular level. The study showed that: (i) heparin and heparansulfates specifically interact with spin-labelled penetratin and promote peptide aggregation and concentration on their molecular surface; (ii) penetratin does not interact with neutral lipids, whereas it enters negatively charged lipid bilayers; (iii) cholesterol plays a negative effect on the insertion of penetratin into the lipid membrane; (iv) the interaction of penetratin with lipid vesicles is strongly dependent on lipid concentration. In a low lipid regime, penetratin associates with the polar heads of phospholipids and aggregates on the membrane surface; once the lipid concentration attains a threshold, the peptide enters the lipid bilayer. This step is characterized by reduced peptide mobility and partial disaggregation.It has been shown that ESR spectroscopy is a valuable investigation tool in studies related to the still unclear mechanism of the internalization process.     

Analysis of the effect of a peptide sequence of the E2 protein (HGV/GBV-C) on the physicochemical properties of zwitterionic and negatively charged bilayers.

The membrane-interacting properties of a potential epitope of GB virus C/hepatitis G virus located at the region (99-118) of the E2 structural protein were investigated using several fluorescence techniques. SUV of DMPC:DPPC (1:1) or DMPG:DPPC (1:1) zwitterionic and anionic mixtures, respectively, were used as model membranes. FRET with NBD-PE as energy donor and Rho-PE as energy acceptor-labelled SUV indicated that the peptide was able to fuse both zwitterionic and anionic SUVs, the latter requiring lower peptide concentrations. However, the peptide increased the steady-state anisotropy of DPH embedded in the hydrophobic centre of the membrane with zwitterionic headgroups and to a lesser extent in anionic bilayers, suggesting that charge-charge interactions are not required for membrane interactions and also confirming the FRET results. No changes in anisotropy were observed with the probe TMA-DPH located at the surface of the bilayer. Finally, analysis of the intrinsic emission fluorescence of the tryptophan residue, upon incubation with SUV, showed a blue shift in the presence of anionic bilayers, both below and above the main transition temperature (T(m)) (gel to liquid-crystalline state) and, to a lesser extent, with the zwitterionic model membrane.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

New analogues of laminin active fragment YIGSR: synthesis and biological activity in vitro and in vivo.

Eleven analogues of the laminin pentapeptide amide fragment Tyr-Ile-Gly-Ser-Arg-NH2 (YIGSR-NH2) corresponding to a B1 chain fragment of the glycoprotein laminin have been synthesized by the solid phase method, and their biological activity has been studied in vitro by a cell adhesion assay: all of them inhibited the adhesion of LLC tumor cells to laminin. The analogues were found to be more resistant to enzymatic degradation in human serum than YIGSR-NH2 itself. Analogue DatIGSHar-NH2 was selected for an experimental pulmonary metastasis assay in vivo: it had higher antimetastatic activity than YIGSR-NH2.