Characterization of chemically treated bacterial (Acetobacter xylinum) biopolymer: some thermo-mechanical properties

Bacterial cellulose prepared from pellicles of Acetobacter xylinum (Gluconacetobacter xylinus) is a unique biopolymer in terms of its molecular structure, mechanical strength and chemical stability. The biochemical analysis revealed that various alkali treatment methods were effective in removing proteins and nucleic acids from native membrane resulting in pure cellulose membrane. The effect of various treatment regimens on thermo-mechanical properties of the material was investigated. The cellulose in the form of purified cellulose membranes was characterized by differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The glass transition temperature (T(g)) of the native cellulose (untreated, compressed and dried pellicle) was found to be 13.94 degrees C, in contrast, the chemically treated cellulose membranes has higher T(g) values, ranging from 41.41 degrees C to 48.82 degrees C. Investigations on isothermal crystallization were carried out to study the bulk crystallization kinetics. Thermal decomposition pattern of the native as well as alkali treated cellulose was determined by obtaining thermo-gravimetric curves. At higher temperatures (>300 degrees C), the biopolymer was found to degrade. Nevertheless, the alkaline treated cellulose membrane was more stable (between 343.27 degrees C and 370.05 degrees C) in comparison to the native cellulose (298.07 degrees C). Further, the percentage weight loss in case of native cellulose was found to be 26.57%, in comparison to 6.45% for the treated material, at 300 degrees C. The DMTA revealed complex dynamic modulus of the material, at different temperatures and fixed shear stress, applied at a frequency of 5 Hz. The study delineated the effect of alkali treatment regimens, on the thermo-mechanical properties of bacterial cellulose for its application over a wide range of temperatures.     

The future prospects of microbial cellulose in biomedical applications

Microbial cellulose has proven to be a remarkably versatile biomaterial and can be used in wide variety of applied scientific endeavors, such as paper products, electronics, acoustics, and biomedical devices. In fact, biomedical devices recently have gained a significant amount of attention because of an increased interest in tissue-engineered products for both wound care and the regeneration of damaged or diseased organs. Due to its unique nanostructure and properties, microbial cellulose is a natural candidate for numerous medical and tissue-engineered applications. For example, a microbial cellulose membrane has been successfully used as a wound-healing device for severely damaged skin and as a small-diameter blood vessel replacement. The nonwoven ribbons of microbial cellulose microfibrils closely resemble the structure of native extracellular matrices, suggesting that it could function as a scaffold for the production of many tissue-engineered constructs. In addition, microbial cellulose membranes, having a unique nanostructure, could have many other uses in wound healing and regenerative medicine, such as guided tissue regeneration (GTR), periodontal treatments, or as a replacement for dura mater (a membrane that surrounds brain tissue). In effect, microbial cellulose could function as a scaffold material for the regeneration of a wide variety of tissues, showing that it could eventually become an excellent platform technology for medicine. If microbial cellulose can be successfully mass produced, it will eventually become a vital biomaterial and will be used in the creation of a wide variety of medical devices and consumer products.     

A peptide derived from the rotavirus outer capsid protein VP7 permeabilizes artificial membranes

Biological membranes represent a physical barrier that most viruses have to cross for replication. While enveloped viruses cross membranes through a well-characterized membrane fusion mechanism, non-enveloped viruses, such as rotaviruses, require the destabilization of the host cell membrane by processes that are still poorly understood. We have identified, in the C-terminal region of the rotavirus glycoprotein VP7, a peptide that was predicted to contain a membrane domain and to fold into an amphipathic α-helix. Its structure was confirmed by circular dichroism in media mimicking the hydrophobic environment of the membrane at both acidic and neutral pHs. The helical folding of the peptide was corroborated by ATR-FTIR spectroscopy, which suggested a transmembrane orientation of the peptide. The interaction of this peptide with artificial membranes and its affinity were assessed by plasmon waveguide resonance. We have found that the peptide was able to insert into membranes and permeabilize them while the native protein VP7 did not. Finally, NMR studies revealed that in a hydrophobic environment, this helix has amphipathic properties characteristic of membrane-perforating peptides. Surprisingly, its structure varies from that of its counterpart in the structure of the native protein VP7, as was determined by X-ray. All together, our results show that a peptide released from VP7 is capable of changing its conformation and destabilizing artificial membranes. Such peptides could play an important role by facilitating membrane crossing by non-enveloped viruses during cell infection.     

Enzymatic activity under tangential flow conditions of photochemically grafted membranes containing immobilized catalase

Catalase has been immobilized within sandwich membranes prepared by the photoinduced grafting of an epoxy-diacrylate prepolymer onto commercial asymmetric cellulose membranes. The enzymatic activity of the membrane composite of hydrogen peroxide decomposition has been studied in a recirculation apparatus under tangential flow conditions without ultrafiltration. The enzymatic membranes were exposed to very low mechanical stresses and showed a very good catalytic performance and durability. Initial reaction rates, measured at 25 degrees C as a function of both substrate concentration and enzyme amount immobilized per unit membrane surface, indicate that the mechanism of action of catalase is not altered after immobilization, although substrate diffusion through the original thin layer of membranes may become rate controlling. (c) 1993 John Wiley & Sons, Inc.     

Structural effects of covalent inhibition of phospholipase A2 suggest allosteric coupling between membrane binding and catalytic sites

Phospholipase A(2) (PLA(2)) binds to membranes and catalyzes phospholipid hydrolysis, thus initiating the biosynthesis of lipid-derived mediators of inflammation. A snake-venom PLA(2) was completely inhibited by covalent modification of the catalytic histidine 48 by p-bromophenacyl bromide. Moreover, His(48) modification affected PLA(2) structure, its membrane-binding affinity, and the effects of PLA(2) on the membrane structure. The native PLA(2) increased the order parameter of fluid membranes, whereas the opposite effect was observed for gel-state membranes. The data suggest membrane dehydration by PLA(2) and the formation of PLA(2)-membrane hydrogen bonding. The inhibited PLA(2) had lower membrane-binding affinity and exerted weaker effects on membrane hydration and on the lipid-order parameter. Although membrane binding resulted in formation of more flexible alpha-helices in the native PLA(2), which corresponds to faster amide hydrogen exchange, the modified enzyme was more resistant to hydrogen exchange and experienced little structural change upon membrane binding. The data suggest that 1), modification of a catalytic residue of PLA(2) induces conformational changes that propagate to the membrane-binding surface through an allosteric mechanism; 2), the native PLA(2) acquires more dynamic properties during interfacial activation via membrane binding; and 3), the global conformation of the inhibited PLA(2), including the alpha-helices, is less stable and is not influenced by membrane binding. These findings provide further evidence for an allosteric coupling between the membrane-binding (regulatory) site and the catalytic center of PLA(2), which contributes to the interfacial activation of the enzyme.     

Physico-Mechanical Properties of Chemically Treated Bacterial (Acetobacter xylinum) Cellulose Membrane

Bacterial cellulose obtained through fermentation by the Acetobacter xylinum is of superior functional quality in comparison to plant cellulose. Various alkali treatment methods were used to process bio-chemically complex pellicle into a clean cellulose membrane/sheet. The effect of potassium hydroxide, sodium carbonate and potassium carbonate was found to be milder on the final cellulose product in contrast to the widely used sodium hydroxide treatment. These novel treatment methods also caused improvement in the tensile strength of the membranes in comparison to sodium hydroxide. The overall quality of the 0.1 M sodium carbonate- and potassium carbonate-treated cellulose was superior, as the membranes displayed maximum tensile strength and elongation next to the native membrane. The low tensile strength of sodium hydroxide-treated membrane is attributed to its higher swelling characteristics in alkali. Further, the low swelling property of sodium carbonate- and potassium carbonate-treated membranes resulted in their high oxygen transmission rates (low oxygen barrier). Hunter lab colour parameters were determined to assess the effect of different alkali treatments on the colour characteristics of the membranes. Further, based on the high mechanical strength and comparatively low oxygen transmission rates, the processed cellulose membranes may find application as a bio- packaging material for controlled atmosphere packaging, where hydrophilic membranes with high oxygen barrier and water vapour permeation are desirable.     

Electron-microscopic localisation of thiol and disulphide groups by direct monomaleimido-nanogold labelling in the spermatozoa of a marsupial,the tammar wallaby (Macropus eugenii)

This study utilised a commercially available monomaleimido-nanogold reagent to directly label cellular thiol groups (SH) of marsupial (tammar wallaby) spermatozoa before and after reduction of disulphides (S-S) with mercaptoethylamine hydrochloride (MEA). The sperm surface, mitochondrial membranes, axoneme and tail fibres were all labelled with gold particles before MEA treatment and the label intensity was increased after S-S reduction. The acrosomal membranes and matrix of spermatozoa contained no detectable SH prior to MEA treatment. However, after moderate MEA treatment (1 mg/ml) gold label was associated with the acrosomal membrane and invaginated acrosomal membrane within the acrosomal matrix. After exposure to 5 and 10 mg/ml MEA, gold particles heavily labelled the acrosomal matrix. Thus, the acrosomal membranes and matrix of tammar wallaby spermatozoa both contain S-S cross-linked structures, and this may contribute to the unusual stability of the marsupial acrosome. Under all treatment conditions the nucleus remained unlabelled. This is consistent with early studies which indicated that cysteine was absent from the nuclear protamines. The study also demonstrated that monomaleimido-nanogold can be used to resolve SH- and S-S-rich cellular structures directly, in addition to its use to label antibodies and Fab fragments for immunochemical localisation.This study was supported by a grant to J.C.R. from the Australian Research Council. Y.S. was the recipient of an Australian International Development Program Fellowship.     

Dynamics properties of membrane proteins in native cell membranes revealed by solid-state NMR spectroscopy

Cell membranes provide an environment that is essential to the functions of membrane proteins. Cell membranes are mainly composed of proteins and highly diverse phospholipids. The influence of diverse lipid compositions of native cell membranes on the dynamics of the embedded membrane proteins has not been examined. Here we employ solid-state NMR to investigate the dynamics of E. coli Aquaporin Z (AqpZ) in its native inner cell membranes, and reveal the influence of diverse lipid compositions on the dynamics of AqpZ by comparing it in native cell membranes to that in POPC/POPG bilayers. We demonstrate that the dynamic rigidity of AqpZ generally conserves in both native cell membranes and POPC/POPG bilayers, due to its tightly packed tetrameric structure. In the gel and the liquid crystal phases of lipids, our experimental results show that AqpZ is more dynamic in native cell membranes than that in POPC/POPG bilayers. In addition, we observe that phase transitions of lipids in native membranes are less sensitive to temperature variations compared with that in POPC/POPG bilayers, which results in that the dynamics of AqpZ is less affected by the phase transitions of lipids in native cell membranes than that in POPC/POPG bilayers. This study provides new insights into the dynamics of membrane proteins in native cell membranes.     

In vitro system for high-throughput screening of random peptide libraries for antimicrobial peptides that recognize bacterial membranes.

Antibacterial peptides have been isolated from a wide range of species. Some of these peptides act on microbial membranes, disrupting their barrier function. With the increasing development of antibiotic resistance by bacteria, these antibacterial peptides, which have a new mode of action, have attracted interest as antibacterial agents. To date, however, few effective high-throughput approaches have been developed for designing and screening peptides that act selectively on microbial membranes. In vitro display techniques are powerful tools to select biologically functional peptides from peptide libraries. Here, we used the ribosome display system to form peptide-ribosome-mRNA complexes in vitro from nucleotides encoding a peptide library, as well as immobilized model membranes, to select specific sequences that recognize bacterial membranes. This combination of ribosome display and immobilized model membranes was effective as an in vitro high-throughput screening system and enabled us to identify motif sequences (ALR, KVL) that selectively recognized the bacterial membrane. Owing to host toxicity, it was not possible to enrich any sequence expected to show antimicrobial activity using another in vitro system, e.g. phage display. The synthetic peptides designed from these enriched motifs acted selectively on the bacterial model membrane and showed antibacterial activity. Moreover, the motif sequence conferred selectivity onto native peptides lacking selectivity, and decreased mammalian cell toxicity of native peptides without decreasing their antibacterial activity.     

Evaluation of Tangential Flow Filtration for the Concentration and Separation of Bacteria and Viruses in Contrasting Marine Environments

Tangential flow filtration (TFF), which has been widely adopted to concentrate a diverse array of microbes from water, is a promising method of microbial separation or removal. However, it is essential to select an optimal membrane suitable for the specific filtration application. This study evaluated two different scales of TFF systems for concentrating and separating microbes (including bacteria and viruses) from contrasting marine waters. Among bacteria-size membranes, polyvinylidene difluoride (PVDF) membranes showed higher bacterial recovery, but lower viral permeation efficiencies than polyethersulfone (PES) membranes, regardless of environments and scales of TFF. Estuary samples showed significantly higher percentages of bacterial retention than nearshore and ocean samples. For virus-size membranes, a higher viral recovery and lower sorption was observed for regenerated cellulose membrane than PES membranes in the small-scale TFF. Similar viral recoveries were observed between PES membranes in the large-scale TFF, with higher viral concentrations being observed in estuary samples than in nearshore samples. Deep ocean samples showed the lowest recovery of viruses, which was consistent with observations of bacterial recovery. Synthetically, PVDF may be more suitable for the concentration of bacterial cells, while PES would be a better choice for the collection of viruses. When compared with the PES membrane, regenerated cellulose is better for viral concentration, while PES is recommended to obtain bacteria- and virus-free seawater.     

Characterization of a family 45 glycosyl hydrolase from Fibrobacter succinogenes S85

Fibrobacter succinogenes is one of the most active cellulolytic bacteria ever isolated from the rumen, but enzymes from F. succinogenes capable of hydrolyzing native (insoluble) cellulose at a rapid rate have not been identified. However, the genome sequence of F. succinogenes is now available, and it was hoped that this information would yield new insights into the mechanism of cellulose digestion. The genome has a single family 45 beta-glucanase gene, and some of the enzymes in this family have good activity against native cellulose. The gene encoding the family 45 glycosyl hydrolase from F. succinogenes S85 was cloned into Escherichia coli JM109(DE3) using pMAL-c2 as a vector. Recombinant E. coli cells produced a soluble fusion protein (MAL-F45) that was purified on a maltose affinity column and characterized. MAL-F45 was most active on carboxymethylcellulose between pH 6 and 7 and it hydrolyzed cellopentaose and cellohexaose but not cellotetraose. It also cleaved p-nitrophenyl-cellopentose into cellotriose and p-nitrophenyl-cellobiose. MAL-F45 produced cellobiose, cellotriose and cellotetraose from acid swollen cellulose and bacterial cellulose, but the rate of this hydrolysis was much too low to explain the rate of cellulose digestion by growing cultures. Because the F. succinogenes S85 genome lacks dockerin and cohesin sequences, does not encode any known processive cellulases, and most of its endoglucanase genes do not encode carbohydrate binding modules, it appears that F. succinogenes has a novel mechanism of cellulose degradation.     

Silicone rubber membrane bioreactors for bacterial cellulose production

Cellulose production byAcetobacter pasteurianus was investigated in static culture using four bioreactors with silicone rubber membrane submerged in the medium. The shape of the membrane was flat sheet, flat sack, tube and cylindrical balloon. Production rate of cellulose as well as its yield on consumed glucose by the bacteria grown on the flat type membranes was approximately ten-fold greater than those on the non-flat ones in spite of the same membrane thickness. The membrane reactor using flat sacks of silicone rubber membrane as support of bacterial pellicle can supply greater ratio of surface to volume than a conventional liquid surface culture and is promising for industrial production of bacterial cellulose in large scale.     

Walking the fine line between intracellular and membrane activities of antibacterial peptides

Analogs of pyrrhocoricin, a proline-rich antibacterial peptide with a potential therapeutic use, show multiple actions on bacterial cells. We used a dual-fluorochrome membrane viability assay to provide evidence that the lead drug candidate, Pip-pyrr-MeArg dimer derivative, kills bacteria better than the native peptide due to an improved activity on bacterial membranes. This assay was also instrumental in documenting that activity on bacterial membranes and toxicity to human cells can be correlated, and the predominant mode of action can be changed from intracellular DnaK inhibition to membrane disintegration. Similar analyses with an alanine-scan on pyrrhocoricin identified Lys3 as a crucial player to interaction with bacterial membranes, three prolines in mid-chain position as being responsible for maintaining structural integrity and Asp2, Tyr6, Leu7, and Arg9 as putative contact points to the D-E helix of the bacterial target protein DnaK.     

Influence of Membrane Lipid Composition on a Transmembrane Bacterial Chemoreceptor

Most bacterial chemoreceptors are transmembrane proteins. Although less than 10% of a transmembrane chemoreceptor is embedded in lipid, separation from the natural membrane environment by detergent solubilization eliminates most receptor activities, presumably because receptor structure is perturbed. Reincorporation into a lipid bilayer can restore these activities and thus functionally native structure. However, the extent to which specific lipid features are important for effective restoration is unknown. Thus we investigated effects of membrane lipid composition on chemoreceptor Tar from Escherichia coli using Nanodiscs, small (∼10-nm) plugs of lipid bilayer rendered water-soluble by an annulus of “membrane scaffold protein.” Disc-enclosed bilayers can be made with different lipids or lipid combinations. Nanodiscs carrying an inserted receptor dimer have high protein-to-lipid ratios approximating native membranes and in this way mimic the natural chemoreceptor environment. To identify features important for functionally native receptor structure, we made Nanodiscs using natural and synthetic lipids, assaying extents and rates of adaptational modification. The proportion of functionally native Tar was highest in bilayers closest in composition to E. coli cytoplasmic membrane. Some other lipid compositions resulted in a significant proportion of functionally native receptor, but simply surrounding the chemoreceptor transmembrane segment with a lipid bilayer was not sufficient. Membranes effective in supporting functionally native Tar contained as the majority lipid phosphatidylethanolamine or a related zwitterionic lipid plus a rather specific proportion of anionic lipids, as well as unsaturated fatty acids. Thus the chemoreceptor is strongly influenced by its lipid environment and is tuned to its natural one.     

Resolution and reconstitution of active transport of calcium by a protein(s) from Mycobacterium phlei.

Membrane protein(s) responsible for the active transport of calcium in membrane vesicles from Mycobacterium phlei have been solubilized from membranes by sodium cholate treatment and partially purified using a hydrophobic resin. Reconstitution of calcium transport was demonstrated by reconstitution of detergent extracted membranes with the partially purified protein. The uptake of calcium in the reconstituted system was sensitive to proton-conducting uncouplers. Liposomes prepared with partially purified calcium translocating protein were capable of accumulating calcium. The uptake of calcium in this system occurred as a result of an artificial proton gradient generated by the reduction of entrapped ferricyanide with ascorbate-benzoquinone serving as a hydrogen carrier. The addition of the ionophore A23187 caused efflux of accumulated calcium in both native and proteoliposomal-reconstituted system.     

The three-dimensional morphology of aggregates of native cotton cellulose microfibrils

The three-dimensional morphology of native bacterial cellulose is confirmed by scanning electron microscopy. In addition, it is shown by scanning electron microscopy, and transmission electron microscopy with positive staining by phosphotungstic acid ions that aggregates of microfibrils of native cotton cellulose have a similar structure. The results are consistent with previous reports on microfibrils of algal cellulose. These observations exclude a simple spinneret process as a mechanism of formation of the microfibrils of these sources of cellulose.     

The influence of fermentation conditions and post-treatment methods on porosity of bacterial cellulose membrane

Bacterial cellulose has been found to be attractive as a novel scaffold material due to its unique material properties. Porosity is the most important morphological parameter in the design of scaffolds for tissue engineering. The effects of fermentation conditions (cultivation time and inoculation volume) and post-treatment methods (alkali treatment and drying methods) on the porosities of bacterial cellulose membranes were investigated. With extended cultivation time and increased inoculation volume, more micro-fibrils were secreted by bacteria, which resulted in a more compact structure and diminished porosity. The porosities of alkali-treated bacterial cellulose membranes was in the order of K₂CO₃ > Na₂CO₃ > KOH > NaOH. Freeze-dried membranes had much higher porosity (92%) than the hot air-dried ones (65%). The experimental results suggested that bacterial cellulose with controlled porosities could be prepared by varying fermentation conditions and post-treatment methods. The resulting bacterial cellulose is regarded as a scaffold material of great potentialities.     

Increased production of bacterial cellulose as starting point for scaled-up applications

Bacterial cellulose is composed of an ultrafine nanofiber network and well-ordered structure; therefore, it offers several advantages when used as native polymer or in composite systems.

In this study, a pool of 34 acetic acid bacteria strains belonging to Komagataeibacter xylinus were screened for their ability to produce bacterial cellulose. Bacterial cellulose layers of different thickness were observed for all the culture strains. A high-producing strain, which secreted more than 23 g/L of bacterial cellulose on the isolation broth during 10 days of static cultivation, was selected and tested in optimized culture conditions. In static conditions, the increase of cellulose yield and the reduction of by-products such as gluconic acid were observed. Dried bacterial cellulose obtained in the optimized broth was characterized to determine its microstructural, thermal, and mechanical properties. All the findings of this study support the use of bacterial cellulose produced by the selected strain for biomedical and food applications.

     

Molecular Model for the Solubilization of Membranes into Nanodisks by Styrene Maleic Acid Copolymers

A recent discovery in membrane research is the ability of styrene-maleic acid (SMA) copolymers to solubilize membranes in the form of nanodisks allowing extraction and purification of membrane proteins from their native environment in a single detergent-free step. This has important implications for membrane research because it allows isolation as well as characterization of proteins and lipids in a near-native environment. Here, we aimed to unravel the molecular mode of action of SMA copolymers by performing systematic studies using model membranes of varying compositions and employing complementary biophysical approaches. We found that the SMA copolymer is a highly efficient membrane-solubilizing agent and that lipid bilayer properties such as fluidity, thickness, lateral pressure profile, and charge density all play distinct roles in the kinetics of solubilization. More specifically, relatively thin membranes, decreased lateral chain pressure, low charge density at the membrane surface, and increased salt concentration promote the speed and yield of vesicle solubilization. Experiments using a native membrane lipid extract showed that the SMA copolymer does not discriminate between different lipids and thus retains the native lipid composition in the solubilized particles. A model is proposed for the mode of action of SMA copolymers in which membrane solubilization is mainly driven by the hydrophobic effect and is further favored by physical properties of the polymer such as its relatively small cross-sectional area and rigid pendant groups. These results may be helpful for development of novel applications for this new type of solubilizing agent, and for optimization of the SMA technology for solubilization of the wide variety of cell membranes found in nature.     

Molecular Modeling and Imaging of Initial Stages of Cellulose Fibril Assembly: Evidence for a Disordered Intermediate Stage

The remarkable mechanical strength of cellulose reflects the arrangement of multiple β-1,4-linked glucan chains in a para-crystalline fibril. During plant cellulose biosynthesis, a multimeric cellulose synthesis complex (CSC) moves within the plane of the plasma membrane as many glucan chains are synthesized from the same end and in close proximity. Many questions remain about the mechanism of cellulose fibril assembly, for example must multiple catalytic subunits within one CSC polymerize cellulose at the same rate? How does the cellulose fibril bend to align horizontally with the cell wall? Here we used mathematical modeling to investigate the interactions between glucan chains immediately after extrusion on the plasma membrane surface. Molecular dynamics simulations on groups of six glucans, each originating from a position approximating its extrusion site, revealed initial formation of an uncrystallized aggregate of chains from which a protofibril arose spontaneously through a ratchet mechanism involving hydrogen bonds and van der Waals interactions between glucose monomers. Consistent with the predictions from the model, freeze-fracture transmission electron microscopy using improved methods revealed a hemispherical accumulation of material at points of origination of apparent cellulose fibrils on the external surface of the plasma membrane where rosette-type CSCs were also observed. Together the data support the possibility that a zone of uncrystallized chains on the plasma membrane surface buffers the predicted variable rates of cellulose polymerization from multiple catalytic subunits within the CSC and acts as a flexible hinge allowing the horizontal alignment of the crystalline cellulose fibrils relative to the cell wall.