Crystal structure of triosephosphate isomerase complexed with 2-phosphoglycolate at 0.83-A resolution

The atomic resolution structure of Leishmania mexicana triosephosphate isomerase complexed with 2-phosphoglycolate shows that this transition state analogue is bound in two conformations. Also for the side chain of the catalytic glutamate, Glu(167), two conformations are observed. In both conformations, a very short hydrogen bond exists between the carboxylate group of the ligand and the catalytic glutamate. The distance between O11 of PGA and Oepsilon2 of Glu(167) is 2.61 and 2.55 A for the major and minor conformations, respectively. In either conformation, Oepsilon1 of Glu(167) is hydrogen-bonded to a water network connecting the side chain with bulk solvent. This network also occurs in two mutually exclusive arrangements. Despite the structural disorder in the active site, the C termini of the beta strands that construct the active site display the least anisotropy compared with the rest of the protein. The loops following these beta strands display various degrees of anisotropy, with the tip of the dimer interface loop 3 having very low anisotropy and the C-terminal region of the active site loop 6 having the highest anisotropy. The pyrrolidine ring of Pro(168) at the N-terminal region of loop 6 is in a strained planar conformation to facilitate loop opening and product release.     

Structure determination of the glycosomal triosephosphate isomerase from Trypanosoma brucei brucei at 2.4 A resolution

The three-dimensional crystal structure of the enzyme triosephosphate isomerase from the unicellular tropical blood parasite Trypanosoma brucei brucei has been determined at 2.4 A resolution. This triosephosphate isomerase is sequestered in the glycosome, a unique trypanosomal microbody of vital importance for the energy-generating machinery of the trypanosome. The crystals contain one dimer per asymmetric unit. The structure could be solved by the method of molecular replacement, using the refined co-ordinates of chicken triosephosphate isomerase as a search model. The positions and individual isotropic temperature factors of the 3792 atoms of the complete dimer have been refined by the Hendrickson & Konnert restrained refinement procedure. While tight restraints have been maintained on the bonded distances, the R-factor has dropped to 23.2% for 12317 reflections between 6 A and 2.4 A. A total of 0.6 mg of enzyme was used for establishing the correct crystallization conditions and solving the three-dimensional structure. Although the sequences of trypanosomal and chicken triosephosphate isomerase are identical at only 52% of the 247 common positions, the overall folds are very similar. The architecture of the active sites is virtually the same with 85% of the side-chains being identical. On the other hand, the residues involved in the dimer contacts are the same at only 55% of the positions. Nevertheless, the position of the local 2-fold axis in the chicken and glycosomal dimers is similar. A remarkable feature of glycosomal triosephosphate isomerase is its high overall positive charge. This extra charge is concentrated in four clusters of positively charged side-chains on the surface of the dimer, quite far away from the active site. These clusters may be involved in the mechanism of import of this triosephosphate isomerase into the glycosome.     

The crystal structure of mercury-substituted poplar plastocyanin at 1.9-A resolution

The crystal structure of Hg(II)-plastocyanin has been determined and refined at a resolution of 1.9 A. The crystals were prepared by soaking crystals of Cu(II)-plastocyanin from poplar leaves (Populus nigra var. italica) in a solution of a mercuric salt. Replacement of the Cu(II) atom in plastocyanin by Hg(II) causes only minor changes in the geometry of the metal site, and there are few significant changes elsewhere in the molecule. It is concluded that, as in the case of the native protein, the geometry of the metal site is determined by the polypeptide. The weak metal-S(methionine) bond found in Cu(II)-plastocyanin remains weak in Hg(II)-plastocyanin. The "flip" of a proline side chain close to the metal site from a C gamma-exo conformation in Cu(II)-plastocyanin to a C gamma-endo conformation in Hg(II)-plastocyanin suggests that this region of the molecule is particularly flexible. Crystallographic evidence for the close similarity of the Hg(II)- and Cu(II)-plastocyanin structures was originally obtained from electron density difference maps at 2.5-A resolution. The refinement of the structure was begun with a set of atomic coordinates taken from the structure of Cu(II)-plastocyanin. A Hg(II) atom was substituted for the Cu(II) atom, and the side chains of 6 residues in the vicinity of the metal site were omitted. Three series of stereochemically restrained least-squares refinement calculations were interspersed with two stages of model adjustment followed by phase extension. Fifty-nine water molecules were located. The final structure has a crystallographic residual R = 0.16.     

The structure of rat mast cell protease II at 1.9-A resolution

The structure of rat mast cell protease II (RMCP II), a serine protease with chymotrypsin-like primary specificity, has been determined to a nominal resolution of 1.9 A by single isomorphous replacement, molecular replacement, and restrained crystallographic refinement to a final R-factor of 0.191. There are two independent molecules of RMCP II in the asymmetric unit of the crystal. The rms deviation from ideal bond lengths is 0.016 A and from ideal bond angles is 2.7 degrees. The overall structure of RMCP II is extremely similar to that of chymotrypsin, but the largest differences between the two structures are clustered around the active-site region in a manner which suggests that the unusual substrate specificity of RMCP II is due to these changes. Unlike chymotrypsin, RMCP II has a deep cleft around the active site. An insertion of three residues between residues 35 and 41 of chymotrypsin, combined with concerted changes in sequence and a deletion near residue 61, allows residues 35-41 of RMCP II to adopt a conformation not seen in any other serine protease. Additionally, the loss of the disulfide bridge between residues 191 and 220 of chymotrypsin leads to the formation of an additional substrate binding pocket that we propose to interact with the P3 side chain of bound substrate. RMCP II is a member of a homologous subclass of serine proteases that are expressed by mast cells, neutrophils, lymphocytes, and cytotoxic T-cells. Thus, the structure of RMCP II forms a basis for an explanation of the unusual properties of other members of this class.     

Three-dimensional structure of the ribonuclease T1 2'-GMP complex at 1.9-A resolution

The complex formed between the enzyme ribonuclease T1 (EC 3.1.27.3) and its specific inhibitor 2'-guanylic acid (2'-GMP) has been refined to R = 0.180 using x-ray diffraction data to 1.9-A resolution. The protein molecule displays a compact fold; a 4.5 turn alpha-helix packed over an antiparallel beta-pleated sheet shields most of the hydrophobic interior of the protein against the solvent. The extended pleated sheet structure of ribonuclease T1 is composed of three long and four short strands building up a two-stranded minor beta-sheet near the amino terminus and a five-stranded major sheet in the interior of the protein molecule. In the complex with ribonuclease T1, the inhibitor 2'-guanylic acid adopts the syn-conformation and C2'-endo sugar pucker. Binding of the nucleotide is mainly achieved through amino acid residues 38-46 of the protein. The catalytically active amino acid residues of ribonuclease T1 (His40, Glu58, Arg77, and His92) are located within the major beta-sheet which, as evident from the analysis of atomic temperature factors, provides an environment of minimal local mobility. The geometry of the active site is consistent with a mechanism for phosphodiester hydrolysis where, in the transesterification step, His40 and/or Glu58 act as a general base toward the ribose 2'-hydroxyl group and His92, as a general acid, donates a proton to the leaving 5'-hydroxyl group.     

Crystal structure of low-molecular-weight protein tyrosine phosphatase from Mycobacterium tuberculosis at 1.9-A resolution

The low-molecular-weight protein tyrosine phosphatase (LMWPTPase) belongs to a distinctive class of phosphotyrosine phosphatases widely distributed among prokaryotes and eukaryotes. We report here the crystal structure of LMWPTPase of microbial origin, the first of its kind from Mycobacterium tuberculosis. The structure was determined to be two crystal forms at 1.9- and 2.5-A resolutions. These structural forms are compared with those of the LMWPTPases of eukaryotes. Though the overall structure resembles that of the eukaryotic LMWPTPases, there are significant changes around the active site and the protein tyrosine phosphatase (PTP) loop. The variable loop forming the wall of the crevice leading to the active site is conformationally unchanged from that of mammalian LMWPTPase; however, differences are observed in the residues involved, suggesting that they have a role in influencing different substrate specificities. The single amino acid substitution (Leu12Thr [underlined below]) in the consensus sequence of the PTP loop, CTGNICRS, has a major role in the stabilization of the PTP loop, unlike what occurs in mammalian LMWPTPases. A chloride ion and a glycerol molecule were modeled in the active site where the chloride ion interacts in a manner similar to that of phosphate with the main chain nitrogens of the PTP loop. This structural study, in addition to identifying specific mycobacterial features, may also form the basis for exploring the mechanism of the substrate specificities of bacterial LMWPTPases.     

Structure of interleukin 1 alpha at 2.7-A resolution

The interleukin 1 (IL-1) family of proteins has a central role in modulating immune and inflammatory responses. Two major IL-1 proteins, designated alpha (IL-1 alpha) and beta (IL-1 beta), are produced by activated macrophages and other cell types. In an effort to understand the similarities and differences in the physicochemical and functional properties of these two proteins, a program was initiated to determine their structures. Crystals of IL-1 alpha were grown, and the three-dimensional structure at 2.7-A resolution was solved. The technique of multiple-wavelength anomalous dispersion (MAD) with the selenomethionine form of IL-1 alpha was utilized in combination with a single mercury derivative to provide the starting phases. Partial refinement of the IL-1 alpha model has been performed as well. The overall structure is composed of 14 beta-strands and a 3(10) helix. The core of this structure is a capped beta-barrell that possesses 3-fold symmetry and displays a topology similar to that observed for IL-1 beta [Priestle, J. P., et al. (1988) EMBO J. 7, 339-343] and soybean trypsin inhibitor (STI) [McLachlan, A. D. (1979) J. Mol. Biol. 133, 557-563]. In this paper, the overall structure of IL-1 alpha and the nature and fidelity of the internal 3-fold symmetry are discussed. Comparisons with IL-1 beta and STI are made within these contexts.     

Crystal and molecular structure of human plasminogen kringle 4 refined at 1.9-A resolution.

The crystal structure of human plasminogen kringle 4 (PGK4) has been solved by molecular replacement using the bovine prothrombin kringle 1 (PTK1) structure as a model and refined by restrained least-squares methods to an R factor of 14.2% at 1.9-A resolution. The K4 structure is similar to that of PTK1, and an insertion of one residue at position 59 of the latter has minimal effect on the protein folding. The PGK4 structure is highly stabilized by an internal hydrophobic core and an extensive hydrogen-bonding network. Features new to this kringle include a cis peptide bond at Pro30 and the presence of two alternate, perpendicular, and equally occupied orientations for the Cys75 side chain. The K4 lysine-binding site consists of a hydrophobic trough formed by the Trp62 and Trp72 indole rings, with anionic (Asp55/Asp57) and cationic (Lys35/Arg71) charge pairs at either end. With the adjacent Asp5 and Arg32 residues, these result in triply charged anionic and cationic clusters (pH of crystals at 6.0), which, in addition to the unusually high accessibility of the Trp72 side chain, serve as an obvious marker of the binding site on the K4 surface. A complex intermolecular interaction occurs between the binding sites of symmetry-related molecules involving a highly ordered sulfate anion of solvation in which the Arg32 side chain of a neighboring kringle occupies the binding site.     

Crystal structure of 1-deoxy-d-xylulose-5-phosphate reductoisomerase from Zymomonas mobilis at 1.9-A resolution

1-Deoxy-d-xylulose-5-phosphate reductoisomerase (DXR) is the second enzyme in the non-mevalonate pathway of isoprenoid biosynthesis. The structure of the apo-form of this enzyme from Zymomonas mobilis has been solved and refined to 1.9-A resolution, and that of a binary complex with the co-substrate NADPH to 2.7-A resolution. The subunit of DXR consists of three domains. Residues 1-150 form the NADPH binding domain, which is a variant of the typical dinucleotide-binding fold. The second domain comprises a four-stranded mixed beta-sheet, with three helices flanking the sheet. Most of the putative active site residues are located on this domain. The C-terminal domain (residues 300-386) folds into a four-helix bundle. In solution and in the crystal, the enzyme forms a homo-dimer. The interface between the two monomers is formed predominantly by extension of the sheet in the second domain. The adenosine phosphate moiety of NADPH binds to the nucleotide-binding fold in the canonical way. The adenine ring interacts with the loop after beta1 and with the loops between alpha2 and beta2 and alpha5 and beta5. The nicotinamide ring is disordered in crystals of this binary complex. Comparisons to Escherichia coli DXR show that the two enzymes are very similar in structure, and that the active site architecture is highly conserved. However, there are differences in the recognition of the adenine ring of NADPH in the two enzymes.     

The structure of human lymphotoxin (tumor necrosis factor-beta) at 1.9-A resolution.

The three-dimensional structure of recombinant human lymphotoxin (residues 24-171 of the mature protein) has been determined by x-ray crystallography at 1.9-A resolution (Rcryst = 0.215 for I greater than 3 sigma (I)). Phases were derived by molecular replacement using tumor necrosis factor (TNF-alpha) as a search model. Like TNF-alpha, lymphotoxin (LT) folds to form a "jellyroll" beta-sheet sandwich. Three-fold related LT subunits form a trimer stabilized primarily by hydrophobic interactions. A cluster of 6 basic residues around the 3-fold axis may account for the acid lability of the trimer. Although the structural cores of TNF-alpha and LT are similar, insertions and deletions relative to TNF-alpha occur in loops at the "top" of the LT trimer and significantly alter the local structure and the overall shape trimer is highly conserved. The sites of two mutations (Asp-50 and Tyr-108) that abolish the cytotoxicity of LT are contained within poorly ordered loops of polypeptide chain that flank the cleft between neighboring subunits at the base of the molecule, suggesting that the receptor recognizes an intersubunit binding site.     

Structure and inactivation of triosephosphate isomerase from Entamoeba histolytica

Triosephosphate isomerase (TIM) has been proposed as a target for drug design. TIMs from several parasites have a cysteine residue at the dimer interface, whose derivatization with thiol-specific reagents induces enzyme inactivation and aggregation. TIMs lacking this residue, such as human TIM, are less affected. TIM from Entamoeba histolytica (EhTIM) has the interface cysteine residue and presents more than ten insertions when compared with the enzyme from other pathogens. To gain further insight into the role that interface residues play in the stability and reactivity of these enzymes, we determined the high-resolution structure and characterized the effect of methylmethane thiosulfonate (MMTS) on the activity and conformational properties of EhTIM. The structure of this enzyme was determined at 1.5A resolution using molecular replacement, observing that the dimer is not symmetric. EhTIM is completely inactivated by MMTS, and dissociated into stable monomers that possess considerable secondary structure. Structural and spectroscopic analysis of EhTIM and comparison with TIMs from other pathogens reveal that conformational rearrangements of the interface after dissociation, as well as intramonomeric contacts formed by the inserted residues, may contribute to the unusual stability of the derivatized EhTIM monomer.     

Structure and function of chromophores in R-Phycoerythrin at 1.9 A resolution

The crystal structure of R-Phycoerythrin (R-PE) from Polysiphonia urceolata has been refined to a resolution of 1.9 A, based on the atomic coordinates of R-PE determined at 2.8 A resolution, through the use of difference Fourier method and steorochemistry parameters restrained refinement with model adjustment according to the electron density map. Crystallographic R-factor of the refined model is 0.195 (Rfree = 0.282) from 8-1.9 A. High resolution structure of R-PE showed precise interactions between the chromophores and protein residues, which explained the spectrum characteristic and function of chromophores. Four chiral atoms of phycourobilin (PUB) were identified as C(4)-S, C(16)-S, C(21)-S, and C(20)-R. In addition to the coupling distances of 19 A to 45 A between the chromophores which were observed and involved in the energy transfer pathway, high resolution structure of R-PE suggested other pathways of energy transfer, such as the ultrashort distance between alpha140a and beta155. It has been proposed that aromatic residues in linker proteins not only influence the conformation of chromophore, but may also bridge chromophores to improve the energy transfer efficiency.     

Structure of catalase HPII from Escherichia coli at 1.9 A resolution

Catalase HPII from Escherichia coli, a homotetramer of subunits with 753 residues, is the largest known catalase. The structure of native HPII has been refined at 1.9 A resolution using X-ray synchrotron data collected from crystals flash-cooled with liquid nitrogen. The crystallographic agreement factors R and R(free) are respectively 16.6% and 21.0%. The asymmetric unit of the crystal contains a whole molecule that shows accurate 222-point group symmetry. The structure of the central part of the HPII subunit gives a root mean square deviation of 1.5 A for 477 equivalencies with beef liver catalase. Most of the additional 276 residues of HPII are located in either an extended N-terminal arm or in a C-terminal domain organized with a flavodoxin-like topology. A small number of mostly hydrophilic interactions stabilize the relative orientation between the C-terminal domain and the core of the enzyme. The heme component of HPII is a cis-hydroxychlorin gamma-spirolactone in an orientation that is flipped 180 degrees with respect to the orientation of the heme found in beef liver catalase. The proximal ligand of the heme is Tyr415 which is joined by a covalent bond between its Cbeta atom and the Ndelta atom of His392. Over 2,700 well-defined solvent molecules have been identified filling a complex network of cavities and channels formed inside the molecule. Two channels lead close to the distal side heme pocket of each subunit suggesting separate inlet and exhaust functions. The longest channel, that begins in an adjacent subunit, is over 50 A in length, and the second channel is about 30 A in length. A third channel reaching the heme proximal side may provide access for the substrate needed to catalyze the heme modification and His-Tyr bond formation. HPII does not bind NADPH and the equivalent region to the NADPH binding pocket of bovine catalase, partially occluded in HPII by residues 585-590, corresponds to the entrance to the second channel. The heme distal pocket contains two solvent molecules, and the one closer to the iron atom appears to exhibit high mobility or low occupancy compatible with weak coordination.     

Human triosephosphate isomerase cDNA and protein structure. Studies of triosephosphate isomerase deficiency in man

Nine cDNA clones of human adult liver triosephosphate (TP) isomerase have been isolated and characterized. All nine appear to be derived from a single mRNA species. DNA sequencing of one clone, designated pHTPI-5a, defined the last two nucleotides of the methionine initiation codon, the entire 744-nucleotide coding region of the mature polypeptide, and the entire 448-nucleotide 3' untranslated region. The frequency of TP isomerase clones in the cDNA library suggests that TP isomerase mRNA is present in adult liver at approximately 25 copies/cell. A single, low abundance TP isomerase mRNA species was detected in RNA isolated from normal human fibroblast cell lines. Analysis of TP isomerase mRNA levels in cultured fibroblasts of individuals that are homozygous for TP isomerase deficiency revealed normal levels in one and approximately 40% of normal levels in another. From this small patient sampling, it can be concluded that the genetic basis for TP isomerase deficiency is heterogeneous.     

Structure of the concanavalin A-methyl alpha-D-mannopyranoside complex at 6-A resolution.

The carbohydrate binding site of concanavalin A has been identified in crystals of the concanavalin A-methyl alpha-D-mannopyranoside complex and is 35 A from the iodophenol binding site (K. D. Hardman and C. F. Ainsworth (1973), Biochemistry 12,4442), which has been postulated to be adjacent to the carbohydrate-specific binding site (Edelman et al. (1972), Proc. Natl. Acad. Sci. U.S.A. 69, 2580). The crystals are orthorhombic in space group C222(1) and crystal denisty measurements indicate a protein mass of four monomers (molecular weight of 104 000) per asymmetric unit. However, the electron density map contains eight monomers/asymmetric unit, revealing lattice disorder. The electron density map with a nominal resolution of 6 A has been solved using three heavy-atom derivatives and the position and orientation of each monomer established. Atomic coordinates of the native protein which has previously been determined (K. D. Hardman (1973), Adv. Exp. Med. Biol. 40, 103) were transposed into this new space group and the gross conformations of the monomers, dimers, and tetramers were found to be very similar to the previous structure. However, some minor differences were apparent even at this resolution. After crystal growth, the methyl alpha-D-mannopyranoside was replaced by o-iodophenyl beta-D-glucopyranoside or methyl 2-iodoacetimido-2-deoxy-alpha-D-glucopyranoside in separate experiments, and difference electron density maps were calculated. The highest peaks for both iodinated sugar derivatives associated with each monomer agreed within a few angstroms of each other and were found near side chains Tyr-12 and -100 and Asp-16 and -208. This region is 10-14 A from the manganese, in good agreement with nuclear magnetic resonance (NMR) studies in solution (C. F. Brewer et al. (1973), Biochemistry 12, 4448) and with the site predicted from crosslinked 1222 crystal studies (K. D. Hardman (1973), Adv. Exp. Med. Biol. 40, 103).     

Crystal structure of alpha-hordothionin at 1.9 Angstrom resolution

Crystal structure of ubiquitous toxin from barley alpha-hordothionin (alpha-HT) has been determined at 1.9A resolution by X-ray crystallography. The primary sequence as well as the NMR solution structure of alpha-HT firmly established that alpha-HT belongs to a family of membrane active plant toxins-thionins. Since alpha-HT crystallized in a space group (P4(1)2(1)2) that is different from the space group (I422) of previously determined alpha(1)- and beta-purothionins, and visocotoxin A3, therefore, it provided independent information on protein-protein interactions that may be relevant to the toxin mechanism. The structure of alpha-HT not only confirms overall architectural features (crambin fold) but also provides an additional confirmation of the role for crucial solute molecules, that were postulated to be directly involved in the mechanism of toxicity for thionins.     

Primary structure of human triosephosphate isomerase

Human placental triosephosphate isomerase was isolated by an improved procedure and recovered with the highest specific activity ever reported. Employing this purification procedure, sufficient amounts of the enzyme were obtained for detailed primary structural studies. For sequences analysis, the enzyme was reduced and carboxymethylated and subjected to tryptic and chymotryptic digestions. The peptide mixtures were separated by high-performance liquid chromatography using octyl or alkylphenyl reverse-phase columns and trifluoroacetic acid/acetonitrile gradient elution systems. Sequence analyses of the intact enzyme, tryptic, chymotryptic, and cyanogen bromide peptides were accomplished using high-sensitivity solid-phase sequencing procedures with either 4-N,N-dimethylaminoazobenzene-4'-isothiocyanate or phenylisothiocyanate. The primary structure of human triosephosphate isomerase is constructed from the alignment of the tryptic peptides with the analysis of the overlapping chymotryptic peptides. The enzyme is a dimeric molecule consisting of two identical polypeptide chains with 248 amino acid residues and a calculated subunit molecular mass of 26,750 daltons. A comparison of the amino acid sequences from the human placental enzyme and from other species such as rabbit, chicken, and coelacanth muscles showed relatively high sequence homology, indicating that the evolution of the enzyme is very conservative. The amino acids of the active-site pocket and the subunit-subunit contact sites exhibit few changes.