Biomass plug development and propagation in porous media

Exopolymer-producing bacteria can be used to modify soil profiles for enhanced oil recovery or bioremediation. Understanding the mechanisms associated with biomass plug development and propagation is needed for successful application of this technology. These mechanisms were determined from packed-bed and micromodel experiments that simulate plugging in porous media. Leuconostoc mesenteroides was used, because production of dextran, a water-insoluble exopolymer, can be controlled by using different carbon sources. As dextran was produced, the pressure drop across the porous media increased and began to oscillate. Three pressure phases were identified under exopolymer-producing conditions: the exopolymer-induction phase, the plugging phase, and the plug-propagation phase. The exopolymer-induction phase extended from the time that exopolymer-producing conditions were induced until there was a measurable increase in pressure drop across the porous media. The plugging phase extended from the first increase in pressure drop until a maximum pressure drop was reached. Changes in pressure drop in these two phases were directly related to biomass distribution. Specifically, flow channels within the porous media filled with biomass creating a plugged region where convective flow occurred only in water channels within the biofilm. These water channels were more restrictive to flow causing the pressure drop to increase. At a maximum pressure drop across the porous media, the biomass yielded much like a Bingham plastic, and a flow channel was formed. This behavior marked the onset of the plug-propagation phase which was characterized by sequential development and breakthrough of biomass plugs. This development and breakthrough propagated the biomass plug in the direction of nutrient flow. The dominant mechanism associated with all three phases of plugging in porous media was exopolymer production; yield stress is an additional mechanism in the plug-propagation phase.     

Biomass evolution in porous media and its effects on permeability under starvation conditions

The purpose of this study was to understand bacteria profile modification and its applications in subsurface biological operations such as biobarrier formation, in situ bioremediation, and microbial-enhanced oil recovery. Biomass accumulation and evolution in porous media were investigated both experimentally and theoretically. To study both nutrient-rich and carbon-source-depleted conditions, Leuconostoc mesenteroides was chosen because of its rapid growth rate and exopolymer production rate. Porous micromodels were used to study the effects of biomass evolution on the permeability of a porous medium. Bacterial starvation was initiated by switching the feed from a nutrient solution to a buffer solution in order to examine biofilm stability under nutrient-poor conditions. Four different evolution patterns were identified during the nutrient-rich and nutrient-depleted conditions used in the micromodel experiments. In phase I, the permeability of the porous micromodel decreased as a result of biomass accumulation in pore bodies and pore throats. In phase II, starvation conditions were initiated. The depletion of nutrient in the phase II resulted in slower growth of the biofilm causing the permeability to reach a minimum as all the remaining nutrients were consumed. In phase III, permeability began to increase due to biofilm sloughing caused by shear stress. In phase IV, shear stress remained below the critical shear stress for sloughing and the biofilm remained stable for long periods of time during starvation. The critical shear stress for biofilm sloughing provided an indication of biofilm strength. Shear removal of biofilms occurred when shear stress exceeded critical shear stress. A network model was used to describe the biofilm formation phenomenon and the existence of a critical shear stress. Simulations were in qualitative agreement with the experimental results, and demonstrate the existence of a critical shear stress.     

A novel approach to investigate biofilm accumulation and bacterial transport in porous matrices

Knowledge of bacterial transport through, and biofilm growth in, porous media is vitally important in numerous natural and engineered environments. Despite this, porous media systems are generally oversimplified and the local complexity of cell transport, biofilm formation and the effect of biofilm accumulation on flow patterns is lost. In this study, cells of the sulphate-reducing bacterium, Desulfovibrio sp. EX265, accumulated primarily on the leading faces of obstructions and developed into biofilm, which grew to narrow and block pore throats (at a rate of 12 micro m h(-1) in one instance). This pore blocking corresponded to a decrease in permeability from 9.9 to 4.9 Darcy. Biofilm processes were observed in detail and quantitative data were used to describe the rate of biofilm accumulation temporally and spatially. Accumulation in the inlet zone of the micromodel was 10% higher than in the outlet zone and a mean biofilm height of 28.4 micro m was measured in a micromodel with an average pore height of 34.9 microm. Backflow (flow reversal) of fluid was implemented on micromodels blocked with biofilm growth. Although biofilm surface area cover did immediately decrease (approximately 5%), the biofilm quickly re-established and permeability was not significantly affected (9.4 Darcy). These results demonstrate that the glass micromodel used here is an effective tool for in situ analysis and quantification of bacteria in porous media.     

The SecY complex forms a channel capable of ionic discrimination

Protein translocation across the bacterial membrane occurs at the SecY complex or channel. The resting SecY channel is impermeable to small molecules owing to a plug domain that creates a seal. Here, we report that a channel loosely sealed, or with a plug locked open, does not, however, lead to general membrane permeability. Instead, strong selectivity towards small monovalent anions, especially chloride, is observed. Mutations in the pore ring‐structure increase both the translocation activity of the channel and its ionic conductance, however the selectivity is maintained. The same ionic specificity also occurs at the onset of protein translocation and across the archaeal SecY complex. Thus, the ion‐conducting characteristic of the channel seems to be conserved as a normal consequence of protein translocation. We propose that the pore ring‐structure forms a selectivity filter, allowing cells to tolerate channels with imperfect plugs.     

Theoretical modeling of filtration of blood cell suspensions

A theoretical model of filtration of suspensions containing red blood cells (RBCs) and white blood cells (WBCs) has been developed. Equations are written for the pressure drop, the filtration flow and the fractions of filter pores containing RBCs (alpha) and WBCs (alpha*). Because the relative resistances (ratios of resistance of cell to resistance of suspending fluid) of RBCs (beta) and WBCs (beta*) through the filter pore are greater than one, the transit of these cells (especially WBCs) through the filter is slower than that of suspending fluid; this leads to values of alpha and alpha* higher than those simply expected from the hematocrit and leukocrit, respectively, in the entering and exiting suspensions. In the absence of pore plugging by the cells (steady flow), the pressure drop can be computed from alpha, alpha*, beta and beta*. In order to model unsteady flow, differential equations are written to include pore plugging and the subsequent unplugging by the rising filtration pressure at a constant flow. By specifying the fractions of entering RBCs (epsilon) and WBCs (epsilon*) which would plug the pores and the rate at which the plugged pores would unplug in response to pressure rise (epsilon u), as well as the fractions of entering RBCs (epsilon p) and WBCs (epsilon p*) that would plug the pores permanently, theoretical pressure-time curves can be generated by numerical integration, and the results fit the experimental data well. From such fitting of theoretical curve to experimental data, information can be deduced for epsilon, epsilon*, epsilon u, epsilon p and epsilon* p.     

The Escherichia coli MotAB proton channel unplugged

The MotA and MotB proteins of Escherichia coli serve two functions. The MotA4MotB2 complex attaches to the cell wall via MotB to form the stator of the flagellar motor. The complex also couples the flow of hydrogen ions across the cell membrane to movement of the rotor. The TM3 and TM4 transmembrane helices of MotA and the single TM of MotB comprise the proton channel, which is inactive until the complex assembles into a motor. Here, we identify a segment of the MotB protein that acts as a plug to prevent premature proton flow. The plug is in the periplasm just C-terminal to the MotB TM. It consists of an amphipathic alpha helix flanked by Pro52 and Pro65. When MotA is over-expressed with MotB deleted for residues 51-70, a massive influx of protons acidifies the cytoplasm without significantly depleting the proton motive force. Either that acidification or some sequela thereof, such as potassium or water efflux from the cells, inhibits growth. The Pro residues and Ile58, Tyr61, and Phe62 are essential for plug function. Cys-substituted MotB proteins form a disulfide bond between the two plugs that hold the channels open, and the plugs function intrans within the MotA4MotB2 complex. We present a model in which the MotA4MotB2 complex forms in the bulk membrane. Before association with a motor, we propose the plugs insert into the cell membrane parallel with its periplasmic face and interfere with channel formation. When a complex incorporates into a motor, the plugs leave the membrane and associate with each other via their hydrophobic faces to hold the proton channel open.     

Glass micromodel study of bacterial dispersion in spatially periodic porous networks

Successful implementation of bioremediation clean-up strategies depends on accurate predictions of the transport of bacteria within the subsurface. In this study, etched flat-plate glass micromodels were used to examine bacterial transport in a homogenous network. These networks were created by acid-etching interconnected channels into a glass plate and then fusing it to an unetched plate forming semi-cylindrical pores. The transparent nature of the micromodel allows for both qualitative observations of the bacteria within the pores and quantitative measurements of their concentration. The micromodels are designed to allow establishment of a well-characterized step change in bacterial concentration (Escherichia coli NR50) within the network. During the experiments, bacteria are dispersed through the network by flow. Light scattering is used to detect the change in turbidity within the pores as the bacteria travel through the network. The change in turbidity is used to construct breakthrough curves and spatial concentration profiles of bacteria within the network. The breakthrough curves are fit to the one-dimensional advection/dispersion equation to determine dispersion coefficients at different interstitial fluid velocities. From the breakthrough curves, dispersion coefficients were reproducible for replicate experiments over a range of velocities in the advection-dominated regime. The dispersivity values for two network designs resembling an interconnecting capillary network and a spatially periodic network of cylinders were 0.28 and 0.33 cm respectively, which are slightly greater than the literature values found for other pore networks. Experiments were also conducted within the diffusion-dominated regime to examine the effects of bacterial motility on dispersion. The accumulation of bacteria on the pore walls became significant at the low flow rates and extended experimental times thereby rendering the use of light scattering to determine concentrations ineffective. Bacterial chemotaxis, created by a self-imposed oxygen gradient, was also observed in the micromodel under stagnant fluid conditions.     

Hidden burrow plugs and their function in the tiger beetle, Cosmodela batesi (Coleoptera, Cicindelidae)

Tiger beetle larvae excavate and live in underground burrows, whose openings they sometimes plug with soil. This study documents the burrow plugging behavior of the tiger beetle, Cosmodela batesi (Fleutiaux), in the field. We also tested the function of burrow plugs in the laboratory. In the field, C. batesi more frequently made a plug when it rained. Most larvae made plugs inside their burrows (rather than at the soil surface), and the use of an endoscope was necessary to detect these sub-surface plugs. In the laboratory, flooding was simulated by artificially introducing water into specially-made arenas. Water filled the entire burrow when there was no plug, whereas plugged burrows maintained air chambers inside. When a plug was broken with a wire, burrows filled up with water. The burrowing and plugging behavior described in this study is likely an important adaptation of C. batesi to its habitat.     

Visual acuity in larval zebrafish: behavior and histology

Background

Mating plugs that males place onto the female genital tract are generally assumed to prevent remating with other males. Mating plugs are usually explained as a consequence of male-male competition in multiply mating species. Here, we investigated whether mating plugs also have collateral effects on female fitness. These effects are negative when plugging reduces female mating rate below an optimum. However, plugging may also be positive when plugging prevents excessive forced mating and keeps mating rate closer to a females' optimum. Here, we studied these consequences in the gonochoristic nematode Caenorhabditis remanei. We employed a new CO₂-sedation technique to interrupt matings before or after the production of a plug. We then measured mating rate, attractiveness and offspring number.

Results

The presence of a mating plug did not affect mating rate or attractiveness to roving males. Instead, females with mating plugs produced more offspring than females without copulatory plugs.

Conclusions

Our experiment suggests that plugging might have evolved under male-male competition but represents a poor protection against competing males in our experiment. Even if plugging does not reduce mating rate, our results indicate that females may benefit from being plugged in a different sense than remating prevention.     

Silk‐ and volatile‐based male mate choice in the genital plug‐producing spider

Female mating history can have a strong effect on male fertilization success. Although males often prefer to mate with virgin females, they often also engage with mated females. As the intensity of sperm competition can differ among mated females, males are expected to evolve means to identify their status. In spiders, males often use female silk to gather information about female quality. Males of many spider species deposit mating plugs into female genitalia to hinder further copulations. We tested whether males of the foliage‐dwelling, plug‐producing spider Philodromus cespitum, which is an important natural enemy of pests, discriminate between females of different mating status and whether they can determine the extent of genital plugging in mated females solely on the basis of cues gained from deposited female silk. We presented males with draglines of females that varied in either mating status (virgin vs. mated), the extent of plugging (small vs. big plug), or the age of the plug (fresh vs. old plug) and examined their mate preferences. Additionally, we tested whether males were attracted to volatile cues produced by female bodies. Our experiments revealed that males preferred draglines of virgin females to those of mated females, and mated females with small plugs to those with large plugs. They were also attracted to female volatile cues. This study suggests that males are able to extract fine‐scale information on mating status from female draglines.     

The plug domain of the SecY protein stabilizes the closed state of the translocation channel and maintains a membrane seal

Proteins are translocated across membranes through a channel that is formed by the prokaryotic SecY or eukaryotic Sec61 complex. The crystal structure of the SecY channel from M. jannaschii revealed a plug domain that appears to seal the channel in its closed state. However, the role of the plug remains unclear, particularly because plug deletion mutants in S. cerevisiae are functional. Here, we demonstrate that plug deletion mutants in E. coli SecY are also functional and even efficiently translocate proteins with defective or missing signal sequences. The crystal structures of equivalent plug deletions in SecY of M. jannaschii show that, although the overall structures are maintained, new plugs are formed. These lack many interactions that normally stabilize the closed channel, explaining why the channels can open for proteins with signal-sequence mutations. Our data show that the plug domain is required to maintain a closed state of the channel and suggest a mechanism for channel gating.     

Pore‐network modeling of biofilm evolution in porous media

The influence of bacterial biomass on hydraulic properties of porous media (bioclogging) has been explored as a viable means for optimizing subsurface bioremediation and microbial enhanced oil recovery. In this study, we present a pore network simulator for modeling biofilm evolution in porous media including hydrodynamics and nutrient transport based on coupling of advection transport with Fickian diffusion and a reaction term to account for nutrient consumption. Biofilm has non‐zero permeability permitting liquid flow and transport through the biofilm itself. To handle simultaneous mass transfer in both liquid and biofilm in a pore element, a dual‐diffusion mass transfer model is introduced. The influence of nutrient limitation on predicted results is explored. Nutrient concentration in the network is affected by diffusion coefficient for nutrient transfer across biofilm (compared to water/water diffusion coefficient) under advection dominated transport, represented by mass transport Péclet number >1. The model correctly predicts a dependence of rate of biomass accumulation on inlet concentration. Poor network connectivity shows a significantly large reduction of permeability, for a small biomass pore volume. Biotechnol. Bioeng. 2011;108: 2413–2423. © 2011 Wiley Periodicals, Inc.     

The Roles of Pore Ring and Plug in the SecY Protein-conducting Channel

The protein-conducting channel, or translocon, is an evolutionarily conserved complex that allows nascent proteins to cross a cellular membrane or integrate into it. The crystal structure of an archaeal translocon, the SecY complex, revealed that two elements contribute to sealing the channel: a small “plug” domain blocking the periplasmic region of the channel, and a pore ring composed of six hydrophobic residues acting as a constriction point at the channel's center. To determine the independent functions of these two elements, we have performed molecular dynamics simulations of the native channel as well as of two recently structurally resolved mutants in which portions of their plugs were deleted. We find that in the mutants, the instability in the plug region leads to a concomitant increase in flexibility of the pore ring. The instability is quantified by the rate of water permeation in each system as well as by the force required for oligopeptide translocation. Through a novel simulation in which the interactions between the plug and water were independently controlled, we find that the role of the plug in stabilizing the pore ring is significantly more important than its role as a purely steric barrier.     

Biofilm development and the dynamics of preferential flow paths in porous media

A two-dimensional pore-scale numerical model was developed to evaluate the dynamics of preferential flow paths in porous media caused by bioclogging. The liquid flow and solute transport through the pore network were coupled with a biofilm model including biomass attachment, growth, decay, lysis, and detachment. Blocking of all but one flow path was obtained under constant liquid inlet flow rate and biomass detachment caused by shear forces only. The stable flow path formed when biofilm detachment balances growth, even with biomass weakened by decay. However, shear forces combined with biomass lysis upon starvation could produce an intermittently shifting location of flow channels. Dynamic flow pathways may also occur when combined liquid shear and pressure forces act on the biofilm. In spite of repeated clogging and unclogging of interconnected pore spaces, the average permeability reached a quasi-constant value. Oscillations in the medium permeability were more pronounced for weaker biofilms.     

Diffusion and reaction within porous packing media: a phenomenological model

A phenomenological model has been developed to describe biomass distribution and substrate depletion in porous diatomaceous earth (DE) pellets colonized by Pseudomonas aeruginosa. The essential features of the model are diffusion, attachment and detachment to/from pore walls of the biomass, diffusion of substrate within the pellet, and external mass transfer of both substrate and biomass in the bulk fluid of a packed bed containing the pellets. A bench-scale reactor filled with DE pellets was inoculated with P. aeruginosa and operated in plug flow without recycle using a feed containing glucose as the limiting nutrient. Steady-state effluent glucose concentrations were measured at various residence times, and biomass distribution within the pellet was measured at the lowest residence time. In the model, microorganism/substrate kinetics and mass transfer characteristics were predicted from the literature. Only the attachment and detachment parameters were treated as unknowns, and were determined by fitting biomass distribution data within the pellets to the mathematical model. The rate-limiting step in substrate conversion was determined to be internal mass transfer resistance; external mass transfer resistance and microbial kinetic limitations were found to be nearly negligible. Only the outer 5% of the pellets contributed to substrate conversion. (c) 1993 Wiley & Sons, Inc.     

A scheme to account for the effects of Rb+ and K+ on inward rectifier K channels of bovine artery endothelial cells

An electrochemical gating model is presented to account for the effects described in the companion paper by M. R. Silver, M. S. Shapiro, and T. E. DeCoursey (1994. Journal of General Physiology, 103:519-548) of Rb+ and Rb+/K+ mixtures on the kinetics and voltage dependence of an inwardly rectifying (IR) K+ channel. The model proposes that both Rb+ and K+ act as allosteric modulators of an intrinsically voltage dependent isomerization between open and closed states. Occupancy of binding sites on the outside of the channel promotes channel opening and stabilizes the open state. Rb+ binds to separate sites within the pore and plugs IR channels. Occupancy of the pore by Rb+ can modify the rates of isomerization and the affinity of the allosteric sites for activator ions. The model also incorporates the proposed triple- barreled nature of the IR channel (Matsuda, H., 1988. Journal of Physiology. 397:237-258.) by proposing that plugging of the channel is a cooperative process involving a single site in each of the three bores, 80% of the way through the membrane field. Interaction between bores during plugging and permeation is consistent with correlated flux models of the properties of the IR channel. Parallel bores multiply the number allosteric sites associated with the macromolecular channel and allow for steep voltage dependence without compromising the parallel shift of the half-activation potential with reversal potential. Our model proposes at least six and possibly 12 such allosteric binding sites for activator ions. We derive algebraic relations that permit derivation of parameters that define simple versions of our model from the data of Silver et al. (1994). Numerical simulations based on those parameters closely reproduce that data. The model reproduces the RS+ induced slowing of IR kinetics and the negative shift of the relation between the half-activation voltage (V1/2) and reversal potential when channel plugging is associated with (a) a slowing of the isomerization rates; (b) an increase in the affinity of allosteric sites on closed channels that promote opening; and (c) a decrease in the affinity of sites on open channels that slow closing. Rb+ also slows closing at positive potentials where open channel blockade is unlikely. Allowing Rb+ to be 1.5 times more potent than K+ as an activator in the model can account for this effect and improves the match between the predicted and observed relation between the Rb+ to K+ mole fraction and the opening rate at V1/2.(ABSTRACT TRUNCATED AT 400 WORDS)     

SO, a protein involved in hyphal fusion in Neurospora crassa, localizes to septal plugs

The colony of a filamentous ascomycete fungus typically grows as a multinucleate syncytium. While this syncytial organization has developmental advantages, it bears the risk of extensive damage caused by local injury of hyphae. Loss of cytoplasm in injured hyphae is restricted by the fast and efficient sealing of the central pores of hyphal crosswalls, or septa, by a peroxisome-derived organelle called the Woronin body. The formation of septal plugs is also associated with development and leads to separation of certain parts of the colony. Septal plugs associated with developmental processes or aging hyphae typically occur by the accumulation of sealing material. Here we report that in Neurospora crassa, a protein necessary for hyphal fusion and proper colony development called SO (SOFT) localizes to septal plugs. In response to injury, SO accumulates at the septal plug in a Woronin body-independent manner. However, the presence of the Woronin body affects the speed of accumulation of SO at the septal pore. We determined that SO contributes to, but is not essential for, septal plugging. SO accumulation was also observed at septal plugs formed during hyphal aging and during programmed cell death mediated by genetic differences at heterokaryon incompatibility (het) loci.     

Tissue reaction to intraperitoneally implanted catheter materials

The limiting factor that introduces long-term complications of intraperitoneal (i.p.) catheters used, for example, with the Programable Implantable Medication System (PIMS) is the encapsulation of the catheter tip with tissues due to tissue reaction. The objective is the development of new catheters for PIMS or other systems for i.p. insulin delivery that allow continued insulin flow. The study is based on two hypotheses: (1) vascularized tissue will grow into a porous end plug mounted at the catheter tip (100–300 μm pore diameter), with sufficient blood supply to carry the insulin to the circulation; (2) use of a narrow pore diameter (25 μm or less) end plug will prevent tissue ingrowth yet allow insulin flow. The biological response to the following materials, all designed for use in catheters, were studied: polyurethane, segmented polyether-urethane, alumina coated on Teflon (proplast regular and micro-pore), pyrolytic carbon, high density polyethylene, ultra high molecular weight polyethylene, hydroxyapatite, bioglass, and expanded Teflon. Some of these materials also are used for several other applications: vascular grafts, in the cardiovascular system, and for dental, orthopaedic, and other purposes. The shape and size of the end plugs made from each of the materials were as similar as possible to minimize size effects. The test materials were implanted i.p. in 12 dogs for a period of 12 weeks. The cylindrical plugs were typically 1.5–2.5 cm long, with an inside diameter of 0.3 cm, and an outside diameter of 0.6 cm. When the explants were retrieved, thin capsules were observed, of varying thickness and blood supply, surrounding the end of the catheters. Pathological evaluation revealed the best large pore material to be proplast regular and the best small pore materials to be carbon and polyurethane.     

Steady propagation of a liquid plug in a two-dimensional channel

In this study, we investigate the steady propagation of a liquid plug within a two-dimensional channel lined by a uniform, thin liquid film. The Navier-Stokes equations with free-surface boundary conditions are solved using the finite volume numerical scheme. We examine the effect of varying plug propagation speed and plug length in both the Stokes flow limit and for finite Reynolds number (Re). For a fixed plug length, the trailing film thickness increases with plug propagation speed. If the plug length is greater than the channel width, the trailing film thickness agrees with previous theories for semi-infinite bubble propagation. As the plug length decreases below the channel width, the trailing film thickness decreases, and for finite Re there is significant interaction between the leading and trailing menisci and their local flow effects. A recirculation flow forms inside the plug core and is skewed towards the rear meniscus as Re increases. The recirculation velocity between both tips decreases with the plug length. The macroscopic pressure gradient, which is the pressure drop between the leading and trailing gas phases divided by the plug length, is a function of U and U2, where U is the plug propagation speed, when the fluid property and the channel geometry are fixed. The U2 term becomes dominant at small values of the plug length. A capillary wave develops at the front meniscus, with an amplitude that increases with Re, and this causes large local changes in wall shear stresses and pressures.     

Characterization of a continuous supermacroporous monolithic matrix for chromatographic separation of large bioparticles

A continuous supermacroporous monolithic chromatographic matrix has been characterized using a capillary model, experimental breakthrough curves, and pressure drop experiments. The model describes the convective flow and its dispersive mixing effects, mass transfer resistance, pore size distribution, and the adsorption behavior of the monolithic matrix. It is possible to determine an effective pore size distribution by fitting the capillary model to experimental breakthrough curves and pressure drop experiments. The model is able to describe the flow rate dependence of the experimental breakthrough curves. Mass transport resistance was due to: (i) dispersive mixing effects in the convective flow in the pores; and (ii) slow diffusion in the stagnant film covering the surface within each pore, under adsorption conditions. The monolithic matrix can be described by a very narrow pore size distribution, illustrating one of the advantages of the gel. A broader pore size distribution results in increased band broadening. This can be studied easily using the model developed in this investigation.