Impact of elevated CO<Subscript>2</Subscript> in <Emphasis Type="Italic">Casuarina equisetifolia</Emphasis> rooted stem cuttings inoculated with <Emphasis Type="Italic">Frankia</Emphasis>

Impact of different levels of elevated CO ₂ on the activity of Frankia (Nitrogen-fixing actinomycete) in Casuarina equisetifolia rooted stem cuttings has been studied to understand the relationship between C. equisetifolia, Frankia and CO₂. The stem cuttings of C. equietifolia were collected and treated with 2000 ppm of Indole Butyric Acid (IBA) for rooting. Thus vegetative propagated rooted stem cuttings of C. equisetifolia were inoculated with Frankia and placed in the Open top chambers (OTC) with elevated CO₂ facilities. These planting stocks were maintained in the OTC for 12 months under different levels of elevated CO₂ (ambient control, 600 ppm, 900 ppm). After 12 months, the nodule numbers, bio mass, growth, and photosynthesis of C. equisetifolia rooted stem cuttings inoculated with Frankia were improved under 600 ppm of CO₂. The rooted stem cuttings of C. equisetifolia inoculated with Frankia showed a higher number of nodules under 900 ppm of CO₂ and cuttings without Frankia inoculation exhibited poor growth. Tissue Nitrogen (N) content was also higher under 900 ppm of CO₂ than ambient control and 600 ppm levels. The photosynthetic rate was higher (17.8 μ mol CO₂ m^?2 s^?1) in 900 ppm of CO₂ than in 600 ppm (13.2 μ mol CO₂ m^?2 s^?1) and ambient control (8.3 μ mol CO₂ m^?2 s^?1). This study showed that Frankia can improve growth, N fixation and photosynthesis of C. equietifolia rooted stem cuttings under extreme elevated CO₂ level conditions (900 ppm).     

Effects of propagule type on genetic parameters of wood density and growth in a loblolly pine progeny test at ages 10 and 11?years

Nine full-sib families of loblolly pine (Pinus taeda L.) were produced by a 3 × 3 factorial mating design. Rooted cuttings and seedlings of full-sib families were tested together in two field locations. Twelve-millimeter wood increment cores were collected from 10- and 11-year-old test trees. On each of the two sites, there were six blocks and a split-plot design, with propagule type as the whole plot and family as the sub-plot. In addition to the collection of wood samples, height and diameter of 1,600 trees were measured. No significant differences were found between cuttings and seedlings for wood density and growth traits. Significant family variation was found for growth and wood density. Genetic parameters estimated for wood density and growth traits using seedlings and rooted cuttings showed that individual-tree and family heritability estimates from rooted cuttings were similar to or higher than those from seedlings for all traits. Half-sib breeding values for parents were highly correlated based on seedling and rooted cutting estimates for height (0.95) and wood density (0.99) but not for diameter (0.56), which suggests that wood density and height breeding value estimates from rooted cuttings in clonal progeny tests can be estimated by traditional seedling tests, but not for tree diameter.     

Aeroponics for adventitious rhizogenesis in evergreen haloxeric tree <Emphasis Type="Italic">Tamarix aphylla</Emphasis> (L.) Karst.: influence of exogenous auxins and cutting type

Tamarix aphylla (L.) Karst., a drought resistant halophyte tree, is an agroforestry species which can be used for reclamation of waterlogged saline and marginal lands. Due to very low seed viability and unsuitable conditions for seed germination, the tree is becoming rare in Indian Thar desert. Present study concerns the evaluation of aeroponics technique for vegetative propagation of T. aphylla. Effect of various exogenous auxins (indole-3-acetic acid, indole-3-butyric acid, naphthalene acetic acid) at different concentrations (0.0, 1.0, 2.0, 3.0, 5.0, 10.0 mg l^?1) was examined for induction of adventitious rooting and other morphological features. Among all three auxins tested individually, maximum rooting response (79%) was observed with IBA 2.0 mg l^?1. However, stem cuttings treated with a combination of auxins (2.0 mg l^?1 IBA and 1.0 mg l^?1 IAA) for 15 min resulted in 87% of rooting response. Among three types of stem cuttings (apical shoot, newly sprouted cuttings, mature stem cuttings), maximum rooting (~ 90%) was observed on mature stem cuttings. Number of roots and root length were significantly higher in aeroponically rooted stem cuttings as compared to stem cuttings rooted in soil conditions. Successfully rooted and sprouted plants were transferred to polybags with 95% survival rate. This is the first report on aeroponic culture of Tamarix aphylla which can be utilized in agroforestry practices, marginal land reclamation and physiological studies.     

Quantification of IAA Metabolites in the Early Stages of Adventitious Rooting Might Be Predictive for Subsequent Differences in Rooting Response

Stock mother plants have gained importance in the process of adventitious rooting of woody plants in recent years. The present study reveals the role of the cutting position from a stock mother plant for subsequent rooting. Cuttings of Prunus subhirtella Miq. var. Autumnalis which originated from suckers at the bottom of a tree developed a rooting system of better quality (rooted cutting without callus formation, more main roots) compared to cuttings which originated from shoots at the top of a tree. The latter accumulated significantly more indole-3-acetic acid (IAA) with the highest value of 25.37 μg g^?1 FW on the severance date. These cuttings also contained more indole-3-acetyl-aspartate (IAA-Asp) on the second day after severance with the highest value of 4875.95 μg g^?1 FW compared to cuttings from the bottom-deriving suckers. The latter metabolised IAA primarily via 2-oxindole-3-acetic acid (oxIAA) and indole-3-methanol because the concentrations of these compounds increased at the base of these cuttings. The highest concentration of oxIAA, 8.3 mg ekv. IAA g^?1 FW, was measured 1 h after severance in cuttings from the bottom-derived suckers. With 590.5 ng ekv IAAg^?1 FW, the indole-3-methanol values were also significantly higher in the cuttings from the bottom shoots compared with cuttings from the top of the tree.     

Growth response of Casuarina equisetifolia Forst. rooted stem cuttings to Frankia in nursery and field conditions

Casuarina equisetifolia Forst. is a tree crop that provides fuel wood, land reclamation, dune stabilization, and scaffolding for construction, shelter belts, and pulp and paper production. C. equisetifolia fixes atmospheric nitrogen through a symbiotic relationship with Frankia, a soil bacterium of the actinobacteria group. The roots of C. equisetifolia produce root nodules where the bacteria fix atmospheric nitrogen, which is an essential nutrient for all plant metabolic activities. However, rooted stem cuttings of elite clones of C. equisetifolia by vegetative propagation is being planted by the farmers of Pondicherry as costeffective method. As the vegetative propagation method uses inert material (vermiculite) for rooting there is no chance for Frankia association. Therefore after planting of these stocks the farmers are applying 150 kg of di-ammonium phosphate (DAP)/acre/year. To overcome this fertilizer usage, the Frankia-inoculated rooted stem cuttings were propagated under nursery conditions and transplanted in the nutrient-deficient soils of Karaikal, Pondicherry (India), in this study. Under nursery experiments the growth and biomass of C. equisetifolia rooted stem cuttings inoculated with Frankia showed 3 times higher growth and biomass than uninoculated control. These stocks were transplanted and monitored for their growth and survival for 1 year in the nutrient-deficient farm land. The results showed that the rooted stem cuttings of C. equisetifolia significantly improved growth in height (8.8 m), stem girth (9.6 cm) and tissue nitrogen content (3.3 mg g^?1) than uninoculated controls. The soil nutrient status was also improved due to inoculation of Frankia.     

Influence of the irradiance on phenols content and rooting of Ilex paraguariensis cuttings collected from adult plants

The influence of irradiance on phenolics contents and rooting of Ilex paraguariensis cuttings was studied. Results of the first experiment with stock plants under controlled-irradiance conditions show that when the irradiance level increased from 1.5 to 100 % PPFD, the oxidation of cuttings raised from 19 ± 11 to 88 ± 4 % (r ² = 0.64). At the same time, a strong correlation was observed between total phenolics content and irradiance (r ² = 0.7). In consequence, adventitious rooting diminished from 67 ± 5 to 3 ± 3 % under full radiation (r ² = 0.7). In the second experiment with stock plants subjected to field conditions, the results showed that the rooting process is strongly affected by the genotype (P < 0.0001), while the statistical analysis did not show a correlation between rooting and age of the donor plant. Season had a variable effect and depends on genotype. Although we did not find correlations between the rooting ability and the canopy structure of the stock plants, the position of the branches in the mother plant affected rooting and depended on season in addition to genotype. Concomitantly, the levels of soluble phenolics compounds were higher from leaves subjected to high-irradiance conditions than samples collected from inner canopy; which was coincident with the pattern of cuttings oxidation. In conclusion, our results provide evidences which support the hypothesis that the physiological status of the stock plant at the time that cuttings are excised is of utmost importance for the subsequent rooting of I. paraguariensis cuttings. The influence on soluble phenolics content of different irradiances given to the stock plants negatively affect the rooting process since the product of its oxidation cause the browning and death of the cuttings.     

MIGRATING CAMBIAL DOMAINS AND THE ORIGIN OF WAVY GRAIN IN XYLEM OF BROADLEAVED TREES

Anatomical analysis of wavy-grained xylem samples of Fraxinus, Acer, and Betula reveals a strong underlying pattern of orientational domains within the cambium. Domains are local areas in the cambium within which the orientation of pseudotransverse divisions of fusiform initial cells is predominately unidirectional rather than random. The orientation of ray splitting and ray uniting also tends to be unidirectional within domains. Because their boundaries migrate with time, domains are not fixed in shape or position. A specific group of initial cells may first be located in the interior of a domain, later near a boundary, and still later in another domain of opposite orientational prevalence. Domain patterns and their movements were delineated by classifying and mapping ray splitting and uniting events in temporal series of tangential sections of terminal late xylem. The domain patterns move slowly upward, preceding the similarly outlined, but noncoincident, grain pattern. A wavy grain pattern can be interpreted as being the result of a domain pattern of similar geometry. The efficacy of a domain pattern in eliciting a grain pattern is probably indirectly dependent upon the frequency of occurrence of pseudotransverse divisions and of ray splitting and uniting. The frequency is low in cambium producing straight-grained wood. Evidence of 10-fold and greater increases in frequency of ray splitting and uniting was found in straight-grained to wavy-grained transitional xylem.     

Is it possible to manipulate root anchorage in young trees?

The optimal root system architecture for increased tree anchorage has not yet been determined and in particular, the role of the tap root remains elusive. In Maritime pine (Pinus pinaster Ait.), tap roots may play an important role in anchoring young trees, but in adult trees, their growth is often impeded by the presence of a hard pan layer in the soil and the tap root becomes a minor component of tree anchorage. To understand better the role of the tap root in young trees, we grew cuttings (no tap root present) and seedlings where the tap root had (?) or had not (+) been pruned, in the field for 7 years. The force (F) necessary to deflect the stem sideways was then measured and divided by stem cross-sectional area (CSA), giving a parameter analogous to stress during bending. Root systems were extracted and root architecture and wood mechanical properties (density and longitudinal modulus of elasticity, E _L ) determined. In seedlings (?) tap roots, new roots had regenerated where the tap root had been pruned, whereas in cuttings, one or two lateral roots had grown downwards and acted as tap roots. Cuttings had significantly less lateral roots than the other treatments, but those near the soil surface were 14% and 23% thicker than plants (+) and (?) tap roots, respectively. Cuttings were smaller than seedlings, but were not relatively less resistant to stem deflection, probably because the thicker lateral roots compensated for their lower number. Apart from stem volume which was greater in trees (+) tap roots, no significant differences with regard to size or any root system variable were found in plants (?) or (+) tap roots. In all treatments, lateral roots were structurally reinforced through extra growth along the direction of the prevailing wind, which also improved tap root anchorage. Predictors of log F/CSA differed depending on treatment: in trees (?) tap roots, a combination of the predictors stem taper and %volume allocated to deep roots was highly regressed with log F/CSA (R ² = 0.83), unlike plants (+) tap roots where the combined predictors of lateral root number and root depth were best regressed with log F/CSA (R ² = 0.80). In cuttings, no clear relationships between log F/CSA and any parameter could be found. Wood density and E _L did not differ between roots, but did diminish with increasing distance from the stem in lateral roots. E _L was significantly lower in lateral roots from cuttings. Results showed that nursery techniques influence plant development but that the architectural pattern of Maritime pine root systems is stable, developing a sinker root system even when grown from cuttings. Anchorage is affected but the consequences for the long-term are still not known. Numerical modelling may be the only viable method to investigate the function that each root plays in adult tree anchorage.     

A relationship between irradiation, carbohydrates and rooting in cuttings of Pisum sativum

Rooting ability was studied for cuttings derived from pea plants ( Pisum sativum , L. cv. Alaska) grown in controlled environment rooms. When the cuttings were rooted at 70 μmol m⁻² s⁻, ¹ (photosynthetic photon flux density) or more, a stock plant irradiance at 100 μmol m⁻² s⁻¹ decreased rooting ability in cuttings compared to 5 μmol m⁻², s⁻¹, However, cuttings rooted at 160 μmol m⁻² s⁻¹ formed more roots compared to 5 (μmol m⁻² s⁻¹. Although a high irradiance increased the number of roots formed, it could not overcome a decreased potential for root formation in stock plants grown at high irradiance. Light compensation point and dark respiration of cuttings decreased by 70% during the rooting period, and the final levels were strongly influenced by the irradiance to the cuttings. Respiratory O₂ uptake decreased in the apex and the base of the cutting from day 2 onwards, whereas a constant level was found in the leaves. Only the content of extractable fructose, glucose, sucrose and starch varied during the early part of the rooting period. We conclude that the observed changes in the cuttings are initiated by excision of the root system, and are not involved in the initiation of adventitious roots.     

Subcellular localization of endogenous IAA during poplar leaf rhizogenesis revealed by in situ immunocytochemistry

Poplar 741 [Populus alba × (P. davidiana + P. simonii) × P. tomentosa] leaves were rooted within 8 days when cultured on 1/2 MS medium. The subcellular localization of endogenous indole-3-acetic acid (IAA) in the rhizogenesis was investigated, using an immunocytochemical approach. The results of IAA subcellular localization revealed organelle-specific distribution. Three days after root induction, IAA in vascular cambium cells of the basal region of the petiole was distributed mainly in the plasma membrane, endoplasmic reticulum (ER), and nucleus, with a lesser amount in the cytoplasm. In phloem of the basal region of the petiole, IAA was detected in the plasma membrane and ER of the companion cell and in the plasma membrane of the sieve element. In xylem of the basal region of the petiole, no IAA gold particles were labeled. In mesophyll cells IAA was distributed in the chloroplast starch grains before root induction, and the amount in the chloroplast starch grains increased after 3 days after root induction. This suggests that the plasma membrane and nucleus of cambium cells may be the target sites where IAA performs its physiological activities during poplar leaf rhizogenesis. IAA polar transport from lamina mesophyll to the basal region of the petiole during rhizogenesis is mediated by phloem. The starch grains of mesophyll chloroplasts appeared to accumulate IAA and may be a source of IAA during poplar leaf rhizogenesis. Novel and direct evidence regarding the function of IAA during rhizogenesis is provided in this study.     

Rapid plant regeneration,validation of genetic integrity by ISSR markers and conservation of Reseda pentagyna an endemic plant growing in Saudi Arabia

Reseda pentagyna is the only endemic species among the seven species of the genera Reseda found in Saudi Arabia. Probably no information is available on regeneration by conventional method of regeneration through seeds or cuttings. Therefore, alternative method of tissue culture was attempted to regenerate and multiply the plant. High shoot regeneration (14.44 shoots/explant) was obtained after four weeks, when shoot cuttings cultured on MS containing BA at 1.0 µM. Other cytokinins e.g., Kn, 2iP and TDZ found to be less effective in bud induction and shoot multiplication. Individual shoots were rooted on MS medium supplemented with various auxins at 0.5–5.0 µM concentrations. The IBA (1.5 µM) supplemented MS media induced maximum (83.3%) rooting. The plantlets were acclimatized and hardened under greenhouse conditions in plastic pots containing soil and farm yard manure with 95.0% success. The protocol developed would help to multiply the plant as well as conserve them in natural habitat. This can also be utilized to obtain active constituents for pharmaceutics and genetic manipulations.     

The anatomy and grain pattern in forks of hazel (Corylus avellana L.) and other tree species

Key message

This paper provides a new anatomical model for how branches are joined together at forks in trees, using evidence from MicroXCT scanning, ESEM output and visual observation.

Abstract

Wood grain arrangements at the forks and other junctions within a tree must be arranged to mechanically join together the two or more branches, yet not adversely restrict sap flow. The grain orientation at junctions therefore represents a trade-off in xylem performance between the functions of efficient sap conductance and the provision of adequate load-bearing capacity. Initial observations of wood grain orientation were made on the surfaces of several dozen debarked and fractured bifurcations of a wide range of tree species, both by eye and using a scanning electron microscope. Subsequently, small volumes of wood were sampled from two locations within the junctions of hazel, at the junction apex and on the outer section of join. Wood was imaged in 3D using high-resolution X-ray tomography, and the scanned volumes were analysed for their wood grain patterns. It was found that the wood at the junctions of hazel forks contained only 37 % of the number of vessels contained in wood within the adjacent stem. The vessel elements formed at the junctions were only 32.5 % the length of those in the stem, had a mean diameter only 50.5 % of the stem vessels and consequently only 26.3 % of their lumen volume. The passage of the vessels through the fork wood deviated from a straight line (Euclidean) distance by more than 14 times more than the stem wood vessels did. The interweaving of vessels in the fork wood was over 22 times greater than in the stem wood. A survey of rays showed them to be 58 % more abundant in fork wood but only 62 % of the height of rays in the stem wood. These results suggest that where two branches of similar diameter join to form a tree fork, an interlocking wood grain pattern is formed at the apex of the bifurcation, which provides higher tensile strength to the junction. Breaking of the hazel fork requires wood fibres to be stretched axially and broken across, which requires greater stress than breaking normal wood radially or tangentially.     

Agrobacterium mediated genetic transformation of commercial jute cultivar Corchorus capsularis cv. JRC 321 using shoot tip explants

We have developed a reproducible method of Agrobacterium tumefaciens mediated stable genetic transformation of white jute (Corchorus capsularis cv. JRC 321) utilizing the shoot organogenesis potential of the shoot tip apical meristem. A. tumefaciens strain LBA4404 harboring the binary vector pCAMBIA 1301 was used in the transformation experiments. The explants were subjected to varying durations of preculture and cocultivation with A. tumefaciens in the presence of acetosyringone in order to optimize the conditions conducive for the highest expression of transgene. A schedule of 1 day preculture of shoot tips followed by 3 days cocultivation was optimized for Agrobacterium mediated stable genetic transformation of C. capsularis cv. JRC 321. The optimized lethal doses of the antibiotic hygromycin B for shoot tips (12 mg/L) and for 5 days old seedlings (14 mg/L) were employed in efficient selection of the transformed tissues. This method of transformation resulted in a mean transformation efficiency of 4.09 %. Stable expression of the intron harbored gusA transgene was observed in mature organs of the transformed plants and their progenies. Genomic integration and inheritance of the hpt transgene was further confirmed by Southern blot analysis. The transformed plants exhibited normal morphology and most of them produced viable progenies, many of which segregated in a 3:1 ratio following Mendelian inheritance for a single dominant locus. However, strong P value support for 3:1 segregation ratio was obtained in case of two lines of independent transformants. Nevertheless, the method of transformation mentioned in this protocol could be effectively implemented in genetic transformation of many other cultivars of jute due to the genotype independent regeneration potential of the shoot tip explants.     

Evaluation of aeroponics for clonal propagation of Caralluma edulis,Leptadenia reticulata and Tylophora indica – three threatened medicinal Asclepiads

The present study explores the potential of aeroponic system for clonal propagation of Caralluma edulis (Paimpa) a rare, threatened and endemic edible species, Leptadenia reticulata (Jeewanti), a threatened liana used as promoter of health and Tylophora indica (Burm.f.) Merill, a valuable medicinal climber. Experiments were conducted to asses the effect of exogenous auxin (naphthalene acetic acid, indole-3-butyric acid, indole-3-acetic acid) and auxin concentrations (0.0, 0.5, 1, 2, 3, 4 or 5gl⁻¹) on various root morphological traits of cuttings in the aeroponic chamber. Amongst all the auxins tested, significant effects on the length, number and percentage of rooting was observed in IBA treated nodal cuttings. Cent per cent of the stem cuttings of C. edulis rooted if pre-treated with 2.0 gl⁻¹ of IBA for 5 min while 97.7 % of the stem cuttings of L. reticulata and 93.33 % of stem cuttings of Tylophora indica rooted with pre-treatment of 3.0 gl⁻¹ of IBA for 5 min. Presence of at least two leaves on the nodal cuttings of L. reticulata and T. indica was found to be a prerequisite for root induction. In all the species, the number of adventitious roots per cutting and the percentage of cuttings rooted aeroponically were significantly higher than the soil grown stem cuttings. Shoot growth measured in terms of shoot length was significantly higher in cuttings rooted aeroponically as compared to the cuttings rooted under soil conditions. All the plants sprouted and rooted aeroponically survived on transfer to soil. This is the first report of clonal propagation in an aeroponic system for these plants. This study suggests aeroponics as an economic method for rapid root induction and clonal propagation of these three endangered and medicinally important plants which require focused efforts on conservation and sustainable utilization.     

Verification and fine mapping of <Emphasis Type="Italic">qGW1.05</Emphasis>, a major QTL for grain weight in maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.)

Grain weight, one of the important factors to determine corn yield, is a typical quantitative inheritance trait. However, the molecular genetic basis of grain weight still remains limited. In our previous researches, a major QTL associated with grain weight, qGW1.05, has been identified between SSR markers umc1601 and umc1754 at bin locus 1.05–1.06 in maize. Here, its genetic and environmental stabiliteis were verified using a BC₃F₂ population to identify the effect of qGW1.05 on grain weight. Further, qGW1.05-NILs were obtained by MAS successfully. Via a large BC₆F₂ segregation population, together with polymorphic microsatellite markers developed between the parents to screen the genotype of the recombinant plants, qGW1.05 was positioned to a 1.11 Mb genome interval. Furthermore, the progenies of 15 recombinants were tested to confirm the effect of qGW1.05 on grain weight. Combining collinearity among cereal crops and genome annotation, the several candidate genes taking part in grain development were identified in the qGW1.05 region. In this study, qGW1.05 was limited to a 1.11 Mb region on chromosome 1, which established the foundation for understanding the molecular basis underlying kernel development and improving grain weight through MAS using the tightly flanking molecular markers in maize.     

Spiral grain in bristlecone pines (Pinus longaeva) exhibits no correlation with environmental factors

Six hundred and eleven Great Basin bristlecone pines (Pinus longaeva) were surveyed in two separate groves in California’s White Mountains. The presence and direction of spiral grain were recorded for each tree as well as elevation above sea level, horizon angles, latitude and longitude, trunk diameter, whether the tree was dead, and whether the trunk was broken. The proportions of left-handed, right-handed and straight trees were similar in every part of both groves, although the groves lie at different elevations. No significant correlation was found between the direction of spiral grain and any environmental factor. The hypothesis that spiral grain is an adaptation to distribute sap evenly between the roots and the crown in Pinus longaeva is not strongly supported, since spiral grain is not correlated with asymmetric environments and most trees exhibit <90° rotation through the main stem. The data also do not support the idea that spiral grain makes the tree more resistant to breaking in strong winds. Right-handed spiral grain is predicted by this hypothesis, but most bristlecone pines are either left-handed or exhibit no spiral grain. Bristlecone pines are often uprooted from thin soils by strong winds, but rarely are the main stems broken by this mechanism. Spiral grain in Pinus longaeva growing in California’s White Mountains does not appear to be under environmental control.     

Function of spiral grain in trees

Summary Through spiral grain, conduits for sap lead from each root to all branches. This uniform distribution of sap is indicated by the paths of vessels and tracheids, and has been proven experimentally by means of dyed sap injected into the base of stems or taken up by roots. Trees receiving water only from roots at one side of the root collar nevertheless stay green and continue growing. Spiral grain in bark distributes food from each branch to other flanks of the stem and to most roots. Experimental interruptions of the sap and food conduits caused the cambial zone to reorient new conduit cells in new directions, bypassing the interruption. In particular, spiral grooves cut into the stem surface caused spiral grain. The new cells reorient through division and growth. Although spiral grain is largely under genetic control, trees appear to have a spiral grain especially where needed for distribution of water when root spheres are dry at one side. Compared with straight-grained trees, spiral-grained stems and branches bend and twist more when exposed to strong wind, in this way offering less wind resistance and being less likely to break. Through the bending and twisting, snow slides down from branches rather than breaking them, but the main function of spiral grain is the uniform distribution of supplies from each root to all branches, and from each branch to many roots.     

Casuarina research and applications in China

Casuarina trees are planted along the coastal area of the South China as windbreaks, and in agroforestry systems and for wood and fuel wood production. At present, casuarina plantations cover about 300,000 hectares. Casuarina equisetifolia, C. cunninghamiana, C. glauca and C. junghuhniana are the most commonly planted species. A simple technique for the mass propagation of casuarina seedlings has been developed using cuttings rooted in water. A series of field trials have been carried with various Casuarina species, provenances and clones to screen for adaptability to biotic and abiotic stresses in different areas of China. Experiments conducted in the nursery, glasshouse and field showed that ectomycorrhizal (ECTM), arbuscular mycorrhizal (AM) fungi or Frankia symbiotic associations play an important role in improved growth of managed casuarina plantations.     

Introgression of bacterial wilt resistance from eggplant to potato via protoplast fusion and genome components of the hybrids

Key message

Bacterial wilt resistant somatic hybrids were obtained via protoplast fusion between potato and eggplant and three types of nuclear genomes were identified in the hybrids through GISH and SSR analysis.

Abstract

Cultivated potato (Solanum tuberosum L.) lacks resistance to bacterial wilt caused by Ralstonia solanacearum. Interspecific symmetric protoplast fusion was conducted to transfer bacterial wilt resistance from eggplant (S. melongena, 2n = 2x = 24) into dihaploid potato (2n = 2x = 24). In total, 34 somatic hybrids were obtained, and of these, 11 rooted and were tested for genome components and resistance to race 1 of R. solanacearum. The hybrids exhibited multiple ploidy levels and contained the dominant nuclear genome from the potato parent. Three types of nuclear genomes were identified in the hybrids through genomic in situ hybridization (GISH) and simple sequence repeat (SSR) analysis, including (1) the potato type of the tetraploids in which eggplant chromosomes could not be detected by GISH but their nuclear DNA was confirmed by SSR, (2) the biased type of the hexaploids in which the chromosome dosage was 2 potato:1 eggplant, and (3) the chromosome translocation type of the mixoploids and aneuploids that was characterized by various rates of translocations of nonhomologous chromosomes. Cytoplasmic genome analysis revealed that mitochondrial DNA of both parents coexisted and/or recombined in most of the hybrids. However, only potato chloroplast DNA was retained in the hybrids speculating a compatibility between cpDNA and nuclear genome of the cell. The pathogen inoculation assay suggested a successful transfer of bacterial wilt resistance from eggplant to the hybrids that provides potential resistance for potato breeding against bacterial wilt. The genome components characterized in present research may explain partially the inheritance behavior of the hybrids which is informative for potato improvement.     

Maternal inheritance of chloroplast DNA in <Emphasis Type="Italic">Pinus mugo</Emphasis> Turra: a case study of <Emphasis Type="Italic">Pinus mugo</Emphasis> × <Emphasis Type="Italic">Pinus sylvestris</Emphasis> crossing

The opposite modes of chloroplast DNA (cpDNA) inheritance were found to operate in the reciprocal crossings of Scots pine (Pinus sylvestris L.) and mountain dwarf pine (Pinus mugo Turra). The crossings were found to be partially compatible. In P. sylvestris × P. mugo crossing, the paternal transmission of cpDNA to the offspring takes place corroborating the generally acknowledged concept of the paternal cpDNA inheritance in gymnosperms. On the contrary, in P. mugo × P. sylvestris crossing the seed progeny exhibited P. mugo haplotype of the mother tree deviating conspicuously from the above concept. In the open pollination offspring of the putatively hybrid individuals of the Scots and mountain dwarf pines, a biparental inheritance of cpDNA was revealed in mother tree with P. mugo haplotype indicating a loosened control of the maternal inheritance of cpDNA in the putative hybrids. Implications and impacts of this finding for further studies are discussed.