Estimation of Bacterial Cell Numbers in Humic Acid-Rich Salt Marsh Sediments with Probes Directed to 16S Ribosomal DNA

The feasibility of using probes directed towards ribosomal DNAs (rDNAs) as a quantitative approach to estimating cell numbers was examined and applied to study the structure of a bacterial community in humic acid-rich salt marsh sediments. Hybridizations were performed with membrane-bound nucleic acids by using seven group-specific DNA oligonucleotide probes complementary to 16S rRNA coding regions. These included a general eubacterial probe and probes encompassing most members of the gram-negative, mesophilic sulfate-reducing bacteria (SRB). DNA was extracted from sediment samples, and contaminating materials were removed by a series of steps. Efficiency of DNA extraction was 48% based on the recovery of tritiated plasmid DNA added to samples prior to extraction. Reproducibility of the extraction procedure was demonstrated by hybridizations to replicate samples. Numbers of target cells in samples were estimated by comparing the amount of hybridization to extracted DNA obtained with each probe to that obtained with a standard curve of genomic DNA for reference strains included on the same membrane. In June, numbers of SRB detected with an SRB-specific probe ranged from 6.0 × 10⁷ to 2.5 × 10⁹ (average, 1.1 × 10⁹ ± 5.2 × 10⁸) cells g of sediment⁻¹. In September, numbers of SRB detected ranged from 5.4 × 10⁸ to 7.3 × 10⁹ (average, 2.5 × 10⁹ ± 1.5 × 10⁹) cells g of sediment⁻¹. The capability of using rDNA probes to estimate cell numbers by hybridization to DNA extracted from complex matrices permits initiation of detailed studies on community composition and changes in communities based on cell numbers in formerly intractable environments.     

Successional development of sulfate-reducing bacterial populations and their activities in an activated sludge immobilized agar gel film

A combination of fluorescence in situ hybridization (FISH), microprofiles, and denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rDNA fragments followed by hybridization analysis with specific probes was applied to investigate successional development of sulfate-reducing bacteria (SRB) community structure and in situ sulfide production activity within an activated sludge immobilized agar gel film. In this model biofilm system, since biases arising from biofilm heterogeneity can be ignored, the population dynamics of SRB in the agar gel is directly related to physiological capability and in situ activity of SRB. Microelectrode measurements showed that an anoxic zone was already developed at the beginning (0 day), a first sulfide production of 0.054 mumol H2S m(-2) x s(-1) was detected during the first week, and the rate increased gradually to 0.221 mumol H2S m(-2) x s(-1) in the fifth week. The most active sulfide production zone moved upward to the chemocline and intensified with time to form a narrow zone with high volumetric sulfide production rates. This result coincided with the shift of the spatial distributions of SRB populations determined by FISH. In situ hybridization with probe SRB385 for mainly general SRB of the delta Proteobacteria plus some gram-positive bacteria and probe 660 for Desulfobulbus indicated that the most abundant populations of SRB were primarily restricted to near the oxic/anoxic interface (chemocline). A close observation of the development of the vertical distributions of SRB populations revealed that the cell numbers of Desulfobulbus tripled (from 0.5 x 10(8) to 1.5 x 10(8) cells cm(-3)) near the oxic/anoxic interface. Similar growth (from 1.0 x10(8) to 4.5 x 10(8) cells cm(-3)) of Desulfovibrio-like SRB that hybridized with probe SRB385 was observed. PCR-DGGE followed by hybridization analysis revealed that one Desulfobulbus strain was detected from the beginning, and another strain appeared after 1 week, coinciding with the first detected sulfide production. In addition, three strains hybridizing with probe 687 (possibly Desulfovibrio) were also dominant SRB in the agar gel.     

Quantitative cell lysis of indigenous microorganisms and rapid extraction of microbial DNA from sediment.

This study reports improvements in two of the key steps, lysis of indigenous cells and DNA purification, required for achieving a rapid nonselective protocol for extracting nucleic acids directly from sodium dodecyl sulfate (SDS)-treated sediment rich in organic matter. Incorporation of bead-mill homogenization into the DNA extraction procedure doubled the densitometrically determined DNA yield (11.8 micrograms of DNA.g [dry weight] of sediment-1) relative to incorporation of three cycles of freezing and thawing (5.2 micrograms of DNA.g [dry weight] of sediment-1). The improved DNA extraction efficiency was attributed to increased cell lysis, measured by viable counts of sediment microorganisms which showed that 2 and 8%, respectively, survived the bead-mill homogenization and freeze-thaw procedures. Corresponding measurements of suspensions of viable Bacillus endospores demonstrated that 2 and 94% of the initial number survived. Conventional, laser scanning epifluorescence phase-contrast, and differential interference-contrast microscopy revealed that small coccoid bacterial cells (1.2 to 0.3 micron long) were left intact after combined SDS and bead-mill homogenization of sediment samples. Estimates of the residual fraction of the fluorescently stained cell numbers indicated that 6% (2.2 x 10(8) cells.g [dry weight] of sediment-1) of the original population (3.8 x 10(9) cells.g [dry weight] of sediment-1) remained after treatment with SDS and bead-mill homogenization. Thus, lysis of total cells was less efficient than that of cells which could be cultured. The extracted DNA was used to successfully amplify nahR, the regulatory gene for naphthalene catabolism in Pseudomonas putida G7, by PCR.(ABSTRACT TRUNCATED AT 250 WORDS)     

Optimization of DNA immobilization on gold electrodes for label-free detection by electrochemical impedance spectroscopy

The ability to immobilize DNA probes onto gold substrates at an optimum surface density is key in the development of a wide range of DNA biosensors. We present a method to accurately control probe DNA surface density by the simultaneous co-immobilization of thiol modified probes and mercaptohexanol. Probe surface density is controlled by the thiol molar ratio in solution, with a linear relationship between thiol molar ratio and probe density spanning (1-9) x10(12)/cm2. The probe surface density per microscopic surface area was determined using chronocoulometry, and a detailed analysis of the method presented. Using this sample preparation method, the effect of probe density and hybridization on the charge transfer resistance with the negatively charged ferri/ferrocyanide redox couple was determined. Above a threshold probe surface density of 2.5 x 10(12)/cm2, electrostatic repulsion from the negatively charged DNA modulates the charge transfer resistance, allowing hybridization to be detected. Below the threshold density no change in charge transfer resistance with probe density or with hybridization occurs. The probe surface density was optimized to obtain the maximum percentage change in charge transfer resistance with hybridization.     

Analyses of spatial distributions of sulfate-reducing bacteria and their activity in aerobic wastewater biofilms.

The vertical distribution of sulfate-reducing bacteria (SRB) in aerobic wastewater biofilms grown on rotating disk reactors was investigated by fluorescent in situ hybridization (FISH) with 16S rRNA-targeted oligonucleotide probes. To correlate the vertical distribution of SRB populations with their activity, the microprofiles of O(2), H(2)S, NO(2)(-), NO(3)(-), NH(4)(+), and pH were measured with microelectrodes. In addition, a cross-evaluation of the FISH and microelectrode analyses was performed by comparing them with culture-based approaches and biogeochemical measurements. In situ hybridization revealed that a relatively high abundance of the probe SRB385-stained cells (approximately 10(9) to 10(10) cells per cm(3) of biofilm) were evenly distributed throughout the biofilm, even in the oxic surface. The probe SRB660-stained Desulfobulbus spp. were found to be numerically important members of SRB populations (approximately 10(8) to 10(9) cells per cm(3)). The result of microelectrode measurements showed that a high sulfate-reducing activity was found in a narrow anaerobic zone located about 150 to 300 microm below the biofilm surface and above which an intensive sulfide oxidation zone was found. The biogeochemical measurements showed that elemental sulfur (S(0)) was an important intermediate of the sulfide reoxidation in such thin wastewater biofilms (approximately 1,500 microm), which accounted for about 75% of the total S pool in the biofilm. The contribution of an internal Fe-sulfur cycle to the overall sulfur cycle in aerobic wastewater biofilms was insignificant (less than 1%) due to the relatively high sulfate reduction rate.     

Sulphate reduction and vertical distribution of sulphate-reducing bacteria quantified by rRNA slot-blot hybridization in a coastal marine sediment

In the past, enumeration of sulphate-reducing bacteria (SRB) by cultivation-based methods generally contradicted measurements of sulphate reduction, suggesting unrealistically high respiration rates per cell. Here, we report evidence that quantification of SRB rRNA by slot-blot hybridization is a valuable tool for a more realistic assessment of SRB abundance in the natural environment. The distribution of SRB was investigated in a coastal marine sediment by hybridization of membrane-immobilized rRNA with oligonucleotide probes. As represented by general probe-target groups, SRB rRNA contributed between 18% and 25% to the prokaryotic rRNA pool. The dominant SRB were related to complete oxidizing genera (Desulphococcus, Desulphosarcina and Desulphobacterium), while Desulphobacter could not be detected. The vertical profile and quantity of rRNA from SRB was compared with sulphate reduction rates (SRR) measured with 35SO4(2-) tracer in whole-core incubations. While SRB abundance was highest near the surface, peaking at around 1.5 cm, measured sulphate reduction rates were lowest in this region. A second peak of SRB rRNA was observed at the transition zone from oxidized to reduced sediment, directly above the sulphate reduction maximum. Cell numbers calculated by converting the relative contribution of SRB rRNA to the percentage of DAPI-stained cells indicated a population size for SRB of 2.4-6.1 x 10(8) cells cm(-3) wet sediment. Cellular sulphate reduction rates calculated on the basis of these estimated cell numbers were between 0.01 and 0.09 fmol SO4(2-) cell(-1) day(-1), which is below the rates that have been determined for pure cultures (0.2-50 fmol SO4(2-) cell(-1) day(-1)) growing exponentially at nearoptimal temperature with a surplus of substrates.     

Successional development of sulfate-reducing bacterial populations and their activities in a wastewater biofilm growing under microaerophilic conditions

A combination of fluorescence in situ hybridization, microprofiles, denaturing gradient gel electrophoresis of PCR-amplified 16S ribosomal DNA fragments, and 16S rRNA gene cloning analysis was applied to investigate successional development of sulfate-reducing bacteria (SRB) community structure and in situ sulfide production activity within a biofilm growing under microaerophilic conditions (dissolved oxygen concentration in the bulk liquid was in the range of 0 to 100 microM) and in the presence of nitrate. Microelectrode measurements showed that oxygen penetrated 200 microm from the surface during all stages of biofilm development. The first sulfide production of 0.32 micromol of H(2)S m(-2) s(-1) was detected below ca. 500 microm in the 3rd week and then gradually increased to 0.70 micromol H(2)S m(-2) s(-1) in the 8th week. The most active sulfide production zone moved upward to the oxic-anoxic interface and intensified with time. This result coincided with an increase in SRB populations in the surface layer of the biofilm. The numbers of the probe SRB385- and 660-hybridized SRB populations significantly increased to 7.9 x 10(9) cells cm(-3) and 3.6 x 10(9) cells cm(-3), respectively, in the surface 400 microm during an 8-week cultivation, while those populations were relatively unchanged in the deeper part of the biofilm, probably due to substrate transport limitation. Based on 16S rRNA gene cloning analysis data, clone sequences that related to Desulfomicrobium hypogeium (99% sequence similarity) and Desulfobulbus elongatus (95% sequence similarity) were most frequently found. Different molecular analyses confirmed that Desulfobulbus, Desulfovibrio, and Desulfomicrobium were found to be the numerically important members of SRB in this wastewater biofilm.     

Recognition of individual genes in diverse microorganisms by cycling primed in situ amplification

Cycling primed in situ amplification-fluorescent in situ hybridization (CPRINS-FISH) was developed to recognize individual genes in a single bacterial cell. In CPRINS, the amplicon was long single-stranded DNA and thus retained within the permeabilized microbial cells. FISH with a multiply labeled fluorescent probe set enabled significant reduction in nonspecific background while maintaining high fluorescence signals of target bacteria. The ampicillin resistance gene in Escherichia coli, chloramphenicol acetyltransferase gene in different gram-negative strains, and RNA polymerase sigma factor (rpoD) gene in Aeromonas spp. could be detected under identical permeabilization conditions. After concentration of environmental freshwater samples onto polycarbonate filters and subsequent coating of filters in gelatin, no decrease in bacterial cell numbers was observed with extensive permeabilization. The detection rates of bacterioplankton in river and pond water samples by CPRINS-FISH with a universal 16S rRNA gene primer and probe set ranged from 65 to 76% of total cell counts (mean, 71%). The concentrations of cells detected by CPRINS-FISH targeting of the rpoD genes of Aeromonas sobria and A. hydrophila in the water samples varied between 2.1 x 10(3) and 9.0 x 10(3) cells ml(-1) and between undetectable and 5.1 x 10(2) cells ml(-1), respectively. These results demonstrate that CPRINS-FISH provides a high sensitivity for microscopic detection of bacteria carrying a specific gene in natural aquatic samples.     

FISH Shows That <Emphasis Type="Italic">Desulfotomaculum</Emphasis> spp. Are the Dominating Sulfate-Reducing Bacteria in a Pristine Aquifer

The hydrochemistry and the microbial diversity of a pristine aquifer system near Garzweiler, Germany, were characterized. Hydrogeochemical and isotopic data indicate a recent activity of sulfate-reducing bacteria in the Tertiary marine sands. The community structure in the aquifer was studied by fluorescence in situ hybridization (FISH). Up to 7.3 × 10⁵ cells/mL were detected by DAPI-staining. Bacteria (identified by the probe EUB338) were dominant, representing 51.9% of the total cell number (DAPI). Another 25.7% of total cell were affiliated with the domain Archaea as identified by the probe ARCH915. Within the domain Bacteria, the -Proteobacteria were most abundant (21.0% of total cell counts). Using genus-specific probes for sulfate-reducing bacteria (SRB), 2.5% of the total cells were identified as members of the genus Desulfotomaculum. This reflects the predominant role these microorganisms have been found to play in sulfate-reducing zones of aquifers at other sites. Previously, all SRB cultured from this site were from the spore-forming genera Desulfotomaculum and Desulfosporosinus.     

Development and application of small-subunit rRNA probes for assessment of selected Thiobacillus species and members of the genus Acidiphilium

Culture-dependent studies have implicated sulfur-oxidizing bacteria as the causative agents of acid mine drainage and concrete corrosion in sewers. Thiobacillus species are considered the major representatives of the acid-producing bacteria in these environments. Small-subunit rRNA genes from all of the Thiobacillus and Acidiphilium species catalogued by the Ribosomal Database Project were identified and used to design oligonucleotide DNA probes. Two oligonucleotide probes were synthesized to complement variable regions of 16S rRNA in the following acidophilic bacteria: Thiobacillus ferrooxidans and T. thiooxidans (probe Thio820) and members of the genus Acidiphilium (probe Acdp821). Using (32)P radiolabels, probe specificity was characterized by hybridization dissociation temperature (T(d)) with membrane-immobilized RNA extracted from a suite of 21 strains representing three groups of bacteria. Fluorochrome-conjugated probes were evaluated for use with fluorescent in situ hybridization (FISH) at the experimentally determined T(d)s. FISH was used to identify and enumerate bacteria in laboratory reactors and environmental samples. Probing of laboratory reactors inoculated with a mixed culture of acidophilic bacteria validated the ability of the oligonucleotide probes to track specific cell numbers with time. Additionally, probing of sediments from an active acid mine drainage site in Colorado demonstrated the ability to identify numbers of active bacteria in natural environments that contain high concentrations of metals, associated precipitates, and other mineral debris.     

A Study of the Relative Dominance of Selected Anaerobic Sulfate-Reducing Bacteria in a Continuous Bioreactor by Fluorescence <Emphasis Type="Italic">in Situ</Emphasis> Hybridization

The diversity and the community structure of sulfate-reducing bacteria (SRB) in an anaerobic continuous bioreactor used for treatment of a sulfate-containing wastewater were investigated by fluorescence in situ hybridization. Hybridization to the 16S rRNA probe EUB338 for the domain Bacteria was performed, followed by a nonsense probe NON338 as a control for nonspecific staining. Sulfate-reducing consortia were identified by using five nominally genus-specific probes (SRB129 for Desulfobacter, SRB221 for Desulfobacterium, SRB228 for Desulfotomaculum, SRB660 for Desulfobulbus, and SRB657 for Desulfonema) and four group-specific probes (SRB385 as a general SRB probe, SRB687 for Desulfovibrioaceae, SRB814 for Desulfococcus group, and SRB804 for Desulfobacteriaceae). The total prokaryotic population was determined by 4′,6-diamidino-2-phenylindole staining. Hybridization analysis using these 16S rRNA-targeted oligonucleotide probes showed that, of those microbial groupings investigated, Desulfonema, Desulfobulbus, spp., and Desulfobacteriaceae group were the main sulfate-reducing bacteria in the bioreactor when operated at steady state at 35°C, pH 7.8, and a 2.5-day residence time with feed stream containing 2.5 kg m⁻³ sulfate as terminal electron acceptor and 2.3 kg m⁻³ acetate as carbon source and electron donor.     

Community structure, cellular rRNA content, and activity of sulfate-reducing bacteria in marine arctic sediments

The community structure of sulfate-reducing bacteria (SRB) of a marine Arctic sediment (Smeerenburgfjorden, Svalbard) was characterized by both fluorescence in situ hybridization (FISH) and rRNA slot blot hybridization by using group- and genus-specific 16S rRNA-targeted oligonucleotide probes. The SRB community was dominated by members of the Desulfosarcina-Desulfococcus group. This group accounted for up to 73% of the SRB detected and up to 70% of the SRB rRNA detected. The predominance was shown to be a common feature for different stations along the coast of Svalbard. In a top-to-bottom approach we aimed to further resolve the composition of this large group of SRB by using probes for cultivated genera. While this approach failed, directed cloning of probe-targeted genes encoding 16S rRNA was successful and resulted in sequences which were all affiliated with the Desulfosarcina-Desulfococcus group. A group of clone sequences (group SVAL1) most closely related to Desulfosarcina variabilis (91.2% sequence similarity) was dominant and was shown to be most abundant in situ, accounting for up to 54. 8% of the total SRB detected. A comparison of the two methods used for quantification showed that FISH and rRNA slot blot hybridization gave comparable results. Furthermore, a combination of the two methods allowed us to calculate specific cellular rRNA contents with respect to localization in the sediment profile. The rRNA contents of Desulfosarcina-Desulfococcus cells were highest in the first 5 mm of the sediment (0.9 and 1.4 fg, respectively) and decreased steeply with depth, indicating that maximal metabolic activity occurred close to the surface. Based on SRB cell numbers, cellular sulfate reduction rates were calculated. The rates were highest in the surface layer (0.14 fmol cell(-1) day(-1)), decreased by a factor of 3 within the first 2 cm, and were relatively constant in deeper layers.     

A synthetic oligonucleotide probe and a cloned polynucleotide probe based on the yopA gene for detection and enumeration of virulent Yersinia enterocolitica

We compared a synthetically produced 19-mer oligonucleotide probe with a polynucleotide probe consisting of a cloned fragment of the virulence gene yopA for their relative efficiencies in identification and enumeration of virulent Yersinia enterocolitica. The probes were used in DNA-DNA colony hybridization assays to differentiate 70 Yersinia strains with known plasmid profiles. All 19 strains harboring the 40- to 50-megadalton virulence plasmid were positive in the hybridization assay, whereas their isogenic derivatives lacking this plasmid were negative. Both probes correctly identified plasmid-bearing variants of Y. enterocolitica serogroups O:3, O:5,27, O:8, O:9, O:13, and O:21 from three continents. In contrast, none of the probes hybridized with DNA from 32 environmental yersiniae belonging to 26 serogroups not associated with disease. Colony hybridization was used to detect and enumerate virulent Y. enterocolitica in three artificially contaminated food samples. Despite a large background of indigenous bacteria (3 x 10(4) CFU), the efficiency of enumeration ranged from 33 to 82%. The use of nylon filters did not impair the growth of virulent yersiniae. Both probes showed a perfect concordance in their specific differentiation and enumeration of virulent Y. enterocolitica. DNA colony hybridization with these two probes permitted rapid and reliable identification of all common pathogenic serogroups without the need for enrichment or esoteric identification protocols.     

A synthetic oligonucleotide probe and a cloned polynucleotide probe based on the yopA gene for detection and enumeration of virulent Yersinia enterocolitica.

We compared a synthetically produced 19-mer oligonucleotide probe with a polynucleotide probe consisting of a cloned fragment of the virulence gene yopA for their relative efficiencies in identification and enumeration of virulent Yersinia enterocolitica. The probes were used in DNA-DNA colony hybridization assays to differentiate 70 Yersinia strains with known plasmid profiles. All 19 strains harboring the 40- to 50-megadalton virulence plasmid were positive in the hybridization assay, whereas their isogenic derivatives lacking this plasmid were negative. Both probes correctly identified plasmid-bearing variants of Y. enterocolitica serogroups O:3, O:5,27, O:8, O:9, O:13, and O:21 from three continents. In contrast, none of the probes hybridized with DNA from 32 environmental yersiniae belonging to 26 serogroups not associated with disease. Colony hybridization was used to detect and enumerate virulent Y. enterocolitica in three artificially contaminated food samples. Despite a large background of indigenous bacteria (3 x 10(4) CFU), the efficiency of enumeration ranged from 33 to 82%. The use of nylon filters did not impair the growth of virulent yersiniae. Both probes showed a perfect concordance in their specific differentiation and enumeration of virulent Y. enterocolitica. DNA colony hybridization with these two probes permitted rapid and reliable identification of all common pathogenic serogroups without the need for enrichment or esoteric identification protocols.     

A single species, Micromonas pusilla (Prasinophyceae), dominates the eukaryotic picoplankton in the Western English Channel

The class Prasinophyceae (Chlorophyta) contains several photosynthetic picoeukaryotic species described from cultured isolates. The ecology of these organisms and their contributions to the picoeukaryotic community in aquatic ecosystems have received little consideration. We have designed and tested eight new 18S ribosomal DNA oligonucleotide probes specific for different Prasinophyceae clades, genera, and species. Using fluorescent in situ hybridization associated with tyramide signal amplification, these probes, along with more general probes, have been applied to samples from a marine coastal site off Roscoff (France) collected every 2 weeks between July 2000 and September 2001. The abundance of eukaryotic picoplankton remained high (>10(3) cells ml(-1)) during the sampling period, with maxima in summer (up to 2 x 10(4) cells ml(-1)), and a single green algal species, Micromonas pusilla (Prasinophyceae), dominated the community all year round. Members of the order Prasinococcales and the species Bathycoccus prasinos (Mamiellales) displayed sporadic occurrences, while the abundances of all other Prasinophyceae groups targeted remained negligible.     

Detection of Pseudomonas putida B in the rhizosphere by RAPD

A method was developed for the detection of Pseudomonas putida B MM12 released into the rhizosphere of non-sterile barley, using a Random Amplified Polymorphic DNA (RAPD)-generated probe for hybridization with RAPD products generated from DNA extracted from the rhizosphere. The detection procedure involves extraction of rhizosphere bacteria by sonication, extraction of DNA by boiling, RAPD and Southern hybridization with RAPD products and the selected probe. The level of detection of MM12 was at least 1·9×10⁴ cells g⁻¹ barley root. MM12 was detected in rhizosphere when it constituted as little as 0·5% of the culturable population.     

Real-time quantitative PCR assay on bacterial DNA: In a model soil system and environmental samples

Real-time quantitative PCR (RTQ-PCR) was used to quantify the bacterial target DNA extracted by three commonly used DNA extraction protocols (bead mill homogenization, grinding in presence of liquid nitrogen and hot detergent SDS based enzymatic lysis). For the purpose of our study, pure culture of Bacillus cereus (model organism), sterilized soil seeded with a known amount of B. cereus (model soil system) and samples from woodland and grassland (environmental samples) were chosen to extract DNA by three different protocols. The extracted DNA was then quantified by RTQ-PCR using 16S rDNA specific universal bacterial primers. The standard curve used for the quantification by RTQ-PCR was linear and revealed a strong linear relationship (r(2)=0.9968) with a higher amplification efficiency, e5=1.02. High resolution gel electrophoresis was also carried out to observe the effect of these extraction methods on diversity analysis. For the model soil system, the liquid nitrogen method showed the highest target DNA copy number (1.3 x 10(9) copies/microl). However, for both the environmental samples, the bead beating method was found to be suitable on the basis of the high target DNA copy numbers (5.38 x 10(9) and 4.01 x 10(8) copies/ml for woodland and grassland respectively), high yield (6.4 microg/g and 1.76 microg/g of soil for woodland and grassland respectively) and different band patterns on high resolution gel electrophoresis suggesting an overall high extraction efficiency. This difference in the extraction efficiency between the model soil system and environmental samples may be attributed to different affinity of seeded and native DNA to soil particles.     

Phylogenetic identification and substrate uptake patterns of sulfate-reducing bacteria inhabiting an oxic-anoxic sewer biofilm determined by combining microautoradiography and fluorescent in situ hybridization.

We simultaneously determined the phylogenetic identification and substrate uptake patterns of sulfate-reducing bacteria (SRB) inhabiting a sewer biofilm with oxygen, nitrate, or sulfate as an electron acceptor by combining microautoradiography and fluorescent in situ hybridization (MAR-FISH) with family- and genus-specific 16S rRNA probes. The MAR-FISH analysis revealed that Desulfobulbus hybridized with probe 660 was a dominant SRB subgroup in this sewer biofilm, accounting for 23% of the total SRB. Approximately 9 and 27% of Desulfobulbus cells detected with probe 660 could take up [(14)C]propionate with oxygen and nitrate, respectively, as an electron acceptor, which might explain the high abundance of this species in various oxic environments. Furthermore, more than 40% of Desulfobulbus cells incorporated acetate under anoxic conditions. SRB were also numerically important members of H(2)-utilizing and (14)CO(2)-fixing microbial populations in this sewer biofilm, accounting for roughly 42% of total H(2)-utilizing bacteria hybridized with probe EUB338. A comparative 16S ribosomal DNA analysis revealed that two SRB populations, related to the Desulfomicrobium hypogeium and the Desulfovibrio desulfuricans MB lineages, were found to be important H(2) utilizers in this biofilm. The substrate uptake characteristics of different phylogenetic SRB subgroups were compared with the characteristics described to date. These results provide further insight into the correlation between the 16S rRNA phylogenetic diversity and the physiological diversity of SRB populations inhabiting sewer biofilms.     

Estimation of methanotroph abundance in a freshwater lake sediment

The numbers of methane-oxidizing bacteria (methanotrophs) in the sediments of Lake Washington were estimated using three culture-independent methods. Quantitative slot-blot hybridizations were performed with type I and type II methanotroph-specific probes. These data were compared to data from quantitative hybridizations using a pmoA-specific probe and a eubacterial probe. From the combined hybridization data, the methanotroph population in Lake Washington was estimated to be 3.6 x 10(8)-7.4 x 10(8) cells/g dry weight. Methanotroph community structure and number were also investigated using polar lipid fatty acid (PLFA) analysis. Analysis of biomarker PLFAs characteristic of both type I (16:1 omega 8) and type II (18:1 omega 8) methanotrophs was used to estimate the abundance of these bacteria in Lake Washington sediments. From the PLFA data, the methanotroph population in Lake Washington was estimated to be 7.1 x 10(8)-9.4 x 10(9) cells/g dry weight. As a third method of quantitation, we calculated the methanotroph population using the total methane oxidation rate for whole cells in Lake Washington sediment to be 1.3 x 10(8)-1.2 x 10(9) cells/g dry weight. The three independent estimates of the number of methanotrophs in Lake Washington sediment agree within a two- to fourfold range. These data suggest that the three techniques used in this study detect the functionally significant population of methanotrophs in Lake Washington. Furthermore, these techniques will be useful for obtaining estimates of methanotroph abundance in additional environments.     

Characterization of the sediment bacterial community in groundwater discharge zones of an alkaline fen: a seasonal study.

The cell density, activity, and community structure of the bacterial community in wetland sediments were monitored over a 13-month period. The study was performed at Cedar Bog, an alkaline fen. The objective was to characterize the relationship between the sediment bacterial community in groundwater upwelling zones and the physical and chemical factors which might influence the community structure and activity. DNA, protein, and lipid synthesis were measured at three different upwelling zones by using [3H]thymidine, [14C]leucine, and [14C]glucose incorporation, respectively. The physiological status (apparent stress) of the consortium was assessed by comparing [14C]glucose incorporation into membrane and that into storage lipids. Bacterial cell density was determined by acridine orange direct counts, and gross bacterial community structure was determined by bisbenzimidazole-cesium chloride gradient analysis of total bacterial community DNA. Both seasonal and site-related covariation were observed in all estimates of bacterial biomass and activity. Growth rate estimates and cell density peaked in late July at 2.5 x 10(8) cells/g/day and 2.7 x 10(9) cells/g, respectively, and decreased in December to 2.0 x 10(7) cells/g/day and 1.5 x 10(9) cells/g, respectively. Across sites, membrane-to-storage-lipid ratios were generally highest in late spring and peaked in September for one site. Overall, the data indicate dynamic seasonal differences in sediment bacterial community activity and physiology, possibly in response to changing physical and chemical environmental factors which included the C/N/P ratios of the perfusing groundwater. By contrast, total cell numbers were rather constant, and community structure analysis indicated that the overall community structure was similar throughout the study.