Characterization of the basic replicon of pCM1, a narrow-host-range plasmid from the moderate halophile Chromohalobacter marismortui.

The moderately halophilic bacterium Chromohalobacter marismortui contains a 17.5-kb narrow-host-range plasmid, pCM1, which shows interesting properties for the development of cloning vectors for the genetic manipulation of this important group of extremophiles. Plasmid pCM1 can stably replicate and is maintained in most gram-negative moderate halophiles tested. The replication origin has been identified and sequenced, and the minimal pCM1 replicon has been localized to a 1,600-bp region which includes two functionally discrete regions, the oriV region and the repA gene. oriV, located on a 700-bp fragment, contains four iterons 20 bp in length adjacent to a DnaA box that is dispensable but required for efficient replication of pCM1, and it requires trans-acting functions. The repA gene, which encodes a replication protein of 289 residues, is similar to the replication proteins of other gram-negative bacteria.     

Experimental infection of five species of raptors and of hooded crows with Francisella tularensis biovar palaearctica

Sixteen raptors and three hooded crows were infected experimentally with Francisella tularensis biovar palaearctica. The birds were infected parenterally or per os. One goshawk, one sparrow hawk and one hooded crow died during the experimental period, and the remaining 16 birds were killed 14-77 days after the first infection. Francisella tularensis was not isolated from any bird. Antibody levels against F. tularensis measured in nine birds varied from 0 to 1:1,280. In one goshawk with a titer of 1:1,280, positive fluorescent antibody reactions against F. tularensis were seen in the liver and spleen. These results are similar to those found by other authors indicating that raptors and corvids are normally resistant to infections with F. tularensis.     

Characterization of the oriI and oriII Origins of Replication in Phage-Plasmid P4

In the Escherichia coli phage-plasmid P4, two partially overlapping replicons with bipartite ori sites coexist. The essential components of the oriI replicon are the alpha and cnr genes and the ori1 and crr sites; the oriII replicon is composed of the alpha gene, with the internal ori2 site, and the crr region. The P4 alpha protein has primase and helicase activities and specifically binds type I iterons, present in ori1 and crr. Using a complementation test for plasmid replication, we demonstrated that the two replicons depend on both the primase and helicase activities of the alpha protein. Moreover, neither replicon requires the host DnaA, DnaG, and Rep functions. The bipartite origins of the two replicons share the crr site and differ for ori1 and ori2, respectively. By deletion mapping, we defined the minimal ori1 and ori2 regions sufficient for replication. The ori1 site was limited to a 123-bp region, which contains six type I iterons spaced regularly close to the helical periodicity, and a 35-bp AT-rich region. Deletion of one or more type I iterons inactivated oriI. Moreover, insertion of 6 or 10 bp within the ori1 region also abolished replication ability, suggesting that the relative arrangement of the iterons is relevant. The ori2 site was limited to a 36-bp P4 region that does not contain type I iterons. In vitro, the alpha protein did not bind ori2. Thus, the alpha protein appears to act differently at the two origins of replication.     

Nucleotide sequence analysis of RepFIC, a basic replicon present in IncFI plasmids P307 and F, and its relation to the RepA replicon of IncFII plasmids.

RepFIC is a basic replicon of IncFI plasmid P307 which is located within a 3.09-kilobase SmaI fragment. The nucleotide sequence of this region has been determined and shown to be homologous with the RepFIIA replicon of IncFII plasmids. The two replicons share three homologous regions, HRI, HRII, and HRIII, which are flanked by two nonhomologous regions, NHRI and NHRII. A comparison of coding regions reveals that the two replicons have several features in common. RepFIC, like RepFIIA, codes for a repA2 protein with its amino-terminal codons in HRI and its carboxy-terminal codons in NHRI. Although the codons for the repA1 proteins are located in NHRII, the DNA region containing a putative promoter, ribosomal binding site, and initiation codons is located in HRII. This region also codes for an inc RNA. There are nine base-pair differences between the inc RNA of RepFIIA and that of RepFIC, and as a result, RepFIC and RepFIIA replicons are compatible. An EcoRI fragment from the F plasmid which shows homology with RepFIC of P307 has also been sequenced. This fragment contains only a portion of RepFIC, including the genes for the putative repA2 protein and inc RNA. The region coding for a putative repA1 protein is interrupted by the transposon Tn1000 and shows no homology with the repA1 region of RepFIIA and RepFIC of P307. Our comparative and structural analyses suggest that RepFIC and RepFIIA, although different, have a similar replication mechanism and thus can be assigned to the same replicon family, which we designate the RepFIIA family.     

Cytokine expression in the liver of mice infected with a highly virulent strain of Francisella tularensis

Abstract Cytokine mRNA expression was determined in the liver of mice subcutaneously inoculated with a lethal dose of the highly virulent strain FSC 041 of Francisella tularensis subvar. tularensis or a sublethal dose of the live vaccine strain of F. tularensis subvar. palaearctica . Expression of mRNA for TNF-α, IL-12, IFN-γ, and IL-10 was demonstrated within 48 h of inoculation, the kinetics being similar irrespective of bacterial strain used. Thus, the expression of a cytokine response believed to be important in the early host defence against live vaccine strain seemed insufficient to prevent the lethality of a more virulent strain.     

Insertion and deletion mutations in the repA4 region of the IncFII plasmid NR1 cause unstable inheritance.

Mutants of IncFII plasmid NR1 that have transposons inserted in the repA4 open reading frame (ORF) are not inherited stably. The repA4 ORF is located immediately downstream from the replication origin (ori). The repA4 coding region contains inverted-repeat sequences that are homologous to the terC inverted repeats located in the replication terminus of the Escherichia coli chromosome. The site of initiation of leading-strand synthesis for replication of NR1 is also located in repA4 near its 3' end. Transposon insertions between ori and the right-hand terC repeat resulted in plasmid instability, whereas transposon insertions farther downstream did not. Derivatives that contained a 35-bp frameshift insertion in the repA4 ORF were all stable, even when the frameshift was located very near the 5' end of the coding region. This finding indicates that repA4 does not specify a protein product that is essential for plasmid stability. Examination of mutants having a nest of deletions with endpoints in or near repA4 indicated that the 3' end of the repA4 coding region and the site of leading-strand initiation could be deleted without appreciable effect on plasmid stability. Deletion of the pemI and pemK genes, located farther downstream from repA4 and reported to affect plasmid stability, also had no detectable effect. In contrast, mutants from which the right-hand terC repeat, or both right- and left-hand repeats, had been deleted were unstable. None of the insertion or deletion mutations in or near repA4 affected plasmid copy number. Alteration of the terC repeats by site-directed mutagenesis had little effect on plasmid stability. Plasmid stability was not affected by a fus mutation known to inactivate the termination function. Therefore, it appears that the overall integrity of the repA4 region is more important for stable maintenance of plasmid NR1 than are any of the individual known features found in this region.     

Minimal region necessary for autonomous replication of pTAR.

The native 44-kilobase-pair plasmid pTAR, discovered in a grapevine strain of Agrobacterium tumefaciens, contains a single origin of DNA replication confined to a 1.0-kilobase-pair region of the macromolecule. This region (ori) confers functions sufficient for replication in Agrobacterium and Rhizobium species but not in Pseudomonas solanacearum, Pseudomonas glumae, Pseudomonas syringae pv. savastanoi, Xanthomonas campestris pv. campestris, and Escherichia coli. ori contains a repA gene that encodes a 28,000-dalton protein required for replication. Nucleotide sequencing of repA and its promoter region revealed four 8-base-pair palindromic repeats upstream of the repA coding region. Deletion of these repeats alters repA expression and plasmid copy number. Downstream of repA are three additional repeats in a region essential for replication. A locus responsible for plasmid partitioning (parA) and a putative second locus regulating plasmid copy number are part of the origin region and are required for stable plasmid maintenance.     

A method for allelic replacement in Francisella tularensis

A vector for mutagenesis of Francisella tularensis was constructed based on the pUC19 plasmid. By inserting the sacB gene of Bacillus subtilis, oriT of plasmid RP4, and a chloramphenicol resistance gene of Shigella flexneri, a vector, pPV, was obtained that allowed specific mutagenesis. A protocol was developed that allowed introduction of the vector into the live vaccine strain, LVS, of F. tularensis by conjugation. As a proof of principle, we aimed to develop a specific mutant defective in expression of a 23-kDa protein (iglC) that we previously have shown to be prominently upregulated during intracellular growth of F. tularensis. A plasmid designated pPV-DeltaiglC was developed that contained only the regions flanking the encoding gene, iglC. By a double crossover event, the chromosomal iglC gene was deleted. However, the resulting strain, denoted DeltaiglC1, still had an intact iglC gene. Southern blot analysis verified that LVS harbors two copies for the iglC gene. The mutagenesis was therefore repeated and a mutant defective in both iglC alleles, designated DeltaiglC1+2, was obtained. The DeltaiglC1+2 strain, in contrast to DeltaiglC1, was shown to display impaired intracellular macrophage growth and to be attenuated for virulence in mice. The developed genetic system has the potential to provide a tool to elucidate virulence mechanisms of F. tularensis and the specific F. tularensis mutant illustrates the critical role of the 23-kDa protein, iglC, for the virulence of F. tularensis LVS.     

Function of the N-terminal half of RepA in activation of Rts1 ori.

The RepA protein of the Rts1 plasmid, consisting of 288 amino acids, is a trans-acting protein essential for replication. A mutant repA gene, repA delta C143, carrying a deletion that removed the 143 C-terminal amino acids of RepA, could transform, but at a low frequency, an Escherichia coli polA strain, JG112, when repA delta C143 was cloned into pBR322 with Rts1 ori in the natural configuration. The transformation was less efficient without the dyad DnaA box in the ori region, and no transformation occurred at 42 degrees C, characteristic of Rts1 replication. A fusion of the 3'-terminal half of repA of the P1 plasmid to repA delta C143 yielded a pBR322 chimeric plasmid that contained Rts1 ori through hybrid (Rts1-P1) repA. This plasmid was maintained much more stably in JG112 at 37 degrees C. At 42 degrees C, however, it was quite unstable. The overproduced hybrid RepA protein showed interference with mini-Rts1 replication in trans and also exhibited an autorepressor function, although both activities were decreased. These findings suggest that the N-terminal half of the RepA molecule of Rts1 is involved in the activation of the replication origin.     

Construction and characterization of a highly efficient Francisella shuttle plasmid

Francisella tularensis is a facultative intracellular pathogen that infects a wide variety of mammals and causes tularemia in humans. It is recognized as a potential agent of bioterrorism due to its low infectious dose and multiple routes of transmission. To date, genetic manipulation in Francisella spp. has been limited due to the inefficiency of DNA transformation, the relative lack of useful selective markers, and the lack of stably replicating plasmids. Therefore, the goal of this study was to develop an enhanced shuttle plasmid that could be utilized for a variety of genetic procedures in both Francisella and Escherichia coli. A hybrid plasmid, pFNLTP1, was isolated that was transformed by electroporation at frequencies of >1 x 10(7) CFU mug of DNA(-1) in F. tularensis LVS, Francisella novicida U112, and E. coli DH5alpha. Furthermore, this plasmid was stably maintained in F. tularensis LVS after passage in the absence of antibiotic selection in vitro and after 3 days of growth in J774A.1 macrophages. Importantly, F. tularensis LVS derivatives carrying pFNLTP1 were unaltered in their growth characteristics in laboratory medium and macrophages compared to wild-type LVS. We also constructed derivatives of pFNLTP1 containing expanded multiple cloning sites or temperature-sensitive mutations that failed to allow plasmid replication in F. tularensis LVS at the nonpermissive temperature. In addition, the utility of pFNLTP1 as a vehicle for gene expression, as well as complementation, was demonstrated. In summary, we describe construction of a Francisella shuttle plasmid that is transformed at high efficiency, is stably maintained, and does not alter the growth of Francisella in macrophages. This new tool should significantly enhance genetic manipulation and characterization of F. tularensis and other Francisella biotypes.     

Genetic and functional analysis of the basic replicon of pPS10, a plasmid specific for Pseudomonas isolated from Pseudomonas syringae patovar savastanoi.

The sequence of a 1823 base-pair region containing the replication functions of pPS10, a narrow host-range plasmid isolated from a strain of Pseudomonas savastanoi, is reported. The origin of replication, oriV, or pPS10 is contained in a 535 base-pair fragment of this sequence that can replicate in the presence of trans-acting function(s) of the plasmid. oriV contains four iterons of 22 base-pairs that are preceded by G+C-rich and A+T-rich regions. A dnaA box located adjacent to the repeats of the origin is dispensable but required for efficient replication of pPS10; A and T are equivalent bases at the 5' end of the box. repA, the gene of a trans-acting replication protein of 26,700 Mr has been identified by genetic and functional analysis. repA is adjacent to the origin of replication and is preceded by the consensus sequences of a typical sigma 70 promoter of Escherichia coli. The RepA protein has been identified, using the minicell system of E. coli, as a polypeptide with an apparent molecular mass of 26,000. A minimal pPS10 replicon has been defined to a continuous 1267 base-pair region of pPS10 that includes the oriV and repA sequences.     

Functional analysis of ori1 and repA of the R-plasmid pSJ5.6 from Neisseria gonorrhoeae

The functional ori1 of the 5.6kb gonococcal R-plasmid pSJ5.6 contains an A-T rich region followed by four 22bp direct repeats and one 19bp inverted repeat. The replication region of the plasmid also contains a gene encoding for a 39kD RepA protein. We have further assessed the functionality of the replication region in pSJ5.6, an-iteron type plasmid, using in vivo complementation assays in Escherichia coli. A 2.1kb PstI-RsaI fragment containing the ori1 and repA gene of pSJ5.6 was cloned into vector pZErO -2 to obtain pZA-MRR. The pUC origin in pZA-MRR was deleted to render the plasmid dependable on the cis-acting ori1 for replication. The resulting plasmid, pMRR, was capable of replication and maintenance in E. coli. We also cloned the ori1 and repA gene separately to obtain pA-Ori and pZG-Rep, respectively. Using in vivo complementation assays, we demonstrated that the ori1(+) plasmid (pA-Ori) was maintained only when the RepA protein was supplied in trans by the high copy number plasmid pZG-Rep.     

Sequencing of the Francisella tularensis strain Schu 4 genome reveals the shikimate and purine metabolic pathways, targets for the construction of a rationally attenuated auxotrophic vaccine

Francisella tularensis is the etiological agent of tularemia, a serious disease in several Northern hemisphere countries. The organism has fastidious growth requirements and is very poorly understood at the genetic and molecular levels. Given the lack of data on this organism, we undertook the sample sequencing of its genome. A random library of DNA fragments from a highly virulent strain (Schu 4) of F. tularensis was constructed and the nucleotide sequences of 13,904 cloned fragments were determined and assembled into 353 contigs. A total of 1.83 Mb of nucleotide sequence was obtained that had a G+C content of 33.2%. Genes located on plasmids pOM1 and pNFL10, which had been previously isolated from low virulence strains of F. tularensis, were absent but all of the other known F. tularensis genes were represented in the assembled data. F. tularensis Schu4 was able to grow in the absence of aromatic amino acids and orthologues of genes which could encode enzymes in the shikimate pathway in other bacteria were identified in the assembled data. Genes that could encode all of the enzymes in the purine biosynthetic and most of the en- zymes in the purine salvage pathways were also identified. This data will be used to develop defined rationally attenuated mutants of F. tularensis, which could be used as replacements for the existing genetically undefined live vaccine strain.     

Cloning and sequencing of plasmid pLC494 isolated from human intestinal Lactobacillus casei: construction of an Escherichia coli-Lactobacillus shuttle vector

The complete nucleotide sequence of plasmid pLC494 isolated from Lactobacillus casei L-49 was determined. Plasmid pLC494 is an 8846-bp long circular molecule with a G+C content of 41.5%. Two putative open reading frames, ORF4 (282 amino acids) and ORF5 (169 amino acids), were identified as replication proteins A and B that revealed 100 and 99% similarity, respectively, with the replication proteins of plasmid pLA103 from Lactobacillus acidophilus TK8912. Upstream of ORF4 were the four repeat regions (three perfect 22-bp repeats and one imperfect motif), a putative ribosome binding site, a -10 region, and a -35 region. The shuttle vector pJLE4942 (5318 bp) was constructed using repA from pLC494, a multiple cloning site, ColE1 ori, the ori of gram-negative bacteria from vector pUC19, and the chloramphenicol resistance gene from pJIR418 as a selection marker. Transformation of several lactic acid bacteria with the vector pJLE4942 indicated that this vector might be useful as a genetic tool for the intestinal lactobacilli.     

Features of the replicon of plasmid pAM10.6 of Pseudomonas fluorescens

We describe features of the basic replicon of the 10.6-kb medium-copy-number plasmid pAM10.6. pAM10.6 was able to replicate in various Pseudomonas strains but was maintained in Escherichia coli only after the p15A origin of replication was inserted. Deletion analysis suggests that the pAM10.6 origin of replication is located in a 0.5-kb region that includes inverted and direct repeats upstream of the repA gene. RepA (204 aa) has a clear homology to plasmid replication proteins of some other gram-negative bacteria. The pas (plasmid addiction system) (genes encoded in the region of 480-bp) stabilizes plasmid maintenance in P. putida cells under nonselective conditions for at least 200 generations. A 3.75-kb PstI fragment of pAM10.6 joined to a Km(r) gene was shown to be a minimal plasmid unit maintained in P. putida as a monomer. Further deletions of this 3.75-kb fragment caused a drive to form stable head-to-tail dimeric plasmids in P. putida.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Deletion of IglH in virulent Francisella tularensis subsp. holarctica FSC200 strain results in attenuation and provides protection against the challenge with the parental strain

Francisella tularensis, the causative agent of tularemia, is a highly infectious intracellular pathogen with no licensed vaccine available today. The recent search for genome sequences involved in F. tularensis virulence mechanisms led to the identification of the 30-kb region defined as a Francisella pathogenicity island (FPI). In our previous iTRAQ study we described the concerted upregulation of some FPI proteins in different F. tularensis strains cultivated under stress conditions. Among them we identified the IglH protein whose role in Francisella virulence has not been characterized yet. In this work we deleted the iglH gene in a European clinical isolate of F. tularensis subsp. holarctica FSC200. We showed that the iglH gene is necessary for intracellular growth and escape of F. tularensis from phagosomes. We also showed that the iglH mutant is avirulent in a mouse model of infection and persists in the organs for about three weeks after infection. Importantly, mice vaccinated by infection with the iglH mutant were protected against subcutaneous challenge with the fully virulent parental FSC200 strain. This is the first report of a defined subsp. holarctica FPI deletion strain that provides protective immunity against subsequent subcutaneous challenge with a virulent isolate of F. tularensis subsp. holarctica.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.