Protein complex prediction based on maximum matching with domain-domain interaction

With the development of high-throughput methods for identifying protein-protein interactions, large scale interaction networks are available. Computational methods to analyze the networks to detect functional modules as protein complexes are becoming more important. However, most of the existing methods only make use of the protein-protein interaction networks without considering the structural limitations of proteins to bind together. In this paper, we design a new protein complex prediction method by extending the idea of using domain-domain interaction information. Here we formulate the problem into a maximum matching problem (which can be solved in polynomial time) instead of the binary integer linear programming approach (which can be NP-hard in the worst case). We also add a step to predict domain-domain interactions which first searches the database Pfam using the hidden Markov model and then predicts the domain-domain interactions based on the database DOMINE and InterDom which contain confirmed DDIs. By adding the domain-domain interaction prediction step, we have more edges in the DDI graph and the recall value is increased significantly (at least doubled) comparing with the method of Ozawa et al. (2010) [1] while the average precision value is slightly better. We also combine our method with three other existing methods, such as COACH, MCL and MCODE. Experiments show that the precision of the combined method is improved. This article is part of a Special Issue entitled: Computational Methods for Protein Interaction and Structural Prediction.     

Integrative approach for computationally inferring protein domain interactions

MOTIVATION: The current need for high-throughput protein interaction detection has resulted in interaction data being generated en masse through such experimental methods as yeast-two-hybrids and protein chips. Such data can be erroneous and they often do not provide adequate functional information for the detected interactions. Therefore, it is useful to develop an in silico approach to further validate and annotate the detected protein interactions. RESULTS: Given that protein-protein interactions involve physical interactions between protein domains, domain-domain interaction information can be useful for validating, annotating, and even predicting protein interactions. However, large-scale, experimentally determined domain-domain interaction data do not exist. Here, we describe an integrative approach to computationally derive putative domain interactions from multiple data sources, including protein interactions, protein complexes, and Rosetta Stone sequences. We further prove the usefulness of such an integrative approach by applying the derived domain interactions to predict and validate protein-protein interactions. AVAILABILITY: A database of putative protein domain interactions derived using the method described in this paper is available at http://interdom.lit.org.sg.     

Inferring protein-protein interactions through high-throughput interaction data from diverse organisms

MOTIVATION: Identifying protein-protein interactions is critical for understanding cellular processes. Because protein domains represent binding modules and are responsible for the interactions between proteins, computational approaches have been proposed to predict protein interactions at the domain level. The fact that protein domains are likely evolutionarily conserved allows us to pool information from data across multiple organisms for the inference of domain-domain and protein-protein interaction probabilities. RESULTS: We use a likelihood approach to estimating domain-domain interaction probabilities by integrating large-scale protein interaction data from three organisms, Saccharomyces cerevisiae, Caenorhabditis elegans and Drosophila melanogaster. The estimated domain-domain interaction probabilities are then used to predict protein-protein interactions in S.cerevisiae. Based on a thorough comparison of sensitivity and specificity, Gene Ontology term enrichment and gene expression profiles, we have demonstrated that it may be far more informative to predict protein-protein interactions from diverse organisms than from a single organism. AVAILABILITY: The program for computing the protein-protein interaction probabilities and supplementary material are available at http://bioinformatics.med.yale.edu/interaction.     

Co-evolutionary analysis of domains in interacting proteins reveals insights into domain-domain interactions mediating protein-protein interactions

Recent advances in functional genomics have helped generate large-scale high-throughput protein interaction data. Such networks, though extremely valuable towards molecular level understanding of cells, do not provide any direct information about the regions (domains) in the proteins that mediate the interaction. Here, we performed co-evolutionary analysis of domains in interacting proteins in order to understand the degree of co-evolution of interacting and non-interacting domains. Using a combination of sequence and structural analysis, we analyzed protein-protein interactions in F1-ATPase, Sec23p/Sec24p, DNA-directed RNA polymerase and nuclear pore complexes, and found that interacting domain pair(s) for a given interaction exhibits higher level of co-evolution than the non-interacting domain pairs. Motivated by this finding, we developed a computational method to test the generality of the observed trend, and to predict large-scale domain-domain interactions. Given a protein-protein interaction, the proposed method predicts the domain pair(s) that is most likely to mediate the protein interaction. We applied this method on the yeast interactome to predict domain-domain interactions, and used known domain-domain interactions found in PDB crystal structures to validate our predictions. Our results show that the prediction accuracy of the proposed method is statistically significant. Comparison of our prediction results with those from two other methods reveals that only a fraction of predictions are shared by all the three methods, indicating that the proposed method can detect known interactions missed by other methods. We believe that the proposed method can be used with other methods to help identify previously unrecognized domain-domain interactions on a genome scale, and could potentially help reduce the search space for identifying interaction sites.     

Statistical analysis of domains in interacting protein pairs

MOTIVATION: Several methods have recently been developed to analyse large-scale sets of physical interactions between proteins in terms of physical contacts between the constituent domains, often with a view to predicting new pairwise interactions. Our aim is to combine genomic interaction data, in which domain-domain contacts are not explicitly reported, with the domain-level structure of individual proteins, in order to learn about the structure of interacting protein pairs. Our approach is driven by the need to assess the evidence for physical contacts between domains in a statistically rigorous way. RESULTS: We develop a statistical approach that assigns p-values to pairs of domain superfamilies, measuring the strength of evidence within a set of protein interactions that domains from these superfamilies form contacts. A set of p-values is calculated for SCOP superfamily pairs, based on a pooled data set of interactions from yeast. These p-values can be used to predict which domains come into contact in an interacting protein pair. This predictive scheme is tested against protein complexes in the Protein Quaternary Structure (PQS) database, and is used to predict domain-domain contacts within 705 interacting protein pairs taken from our pooled data set.     

Evidence for breaking domain-domain functional communication in a synthetase-tRNA complex

We report here evidence for mutations that break domain-domain functional communication in a synthetase-tRNA complex. Each synthetase is roughly divided into two major domains that are paralleled by the two arms of the L-shaped tRNA structure. The active-site-containing domain interacts with the acceptor arm of the tRNA. The second domain frequently interacts with the anticodon-containing arm. By an induced-fit mechanism, contacts with the anticodon can activate formation of a robust transition state at a site over 70 A away. This induced-fit-based activation is thought to occur through domain-domain signaling and is seen by the enhancement of aminoacylation of the anticodon-containing full tRNA versus a substrate based on the acceptor arm alone. Here we describe a rationally designed mutant methionyl-tRNA synthetase containing two point substitutions at sites that potentially link an anticodon-binding motif to the catalytic domain. The double mutation had no effect on interactions with either the isolated acceptor arm or the anticodon stem-loop. In contrast to interactions with the separate pieces, the mutant enzyme was severely impaired for binding the native tRNA and lost much of its ability to enhance the rate of charging of the full tRNA over that of a substrate based on the acceptor arm alone. We propose that these residues are part of a network for facilitating domain-domain communication for formation of an active synthetase-tRNA complex by induced fit.     

Structural assembly of two-domain proteins by rigid-body docking

Background  

Modelling proteins with multiple domains is one of the central challenges in Structural Biology. Although homology modelling has successfully been applied for prediction of protein structures, very often domain-domain interactions cannot be inferred from the structures of homologues and their prediction requiresab initiomethods. Here we present a new structural prediction approach for modelling two-domain proteins based on rigid-body domain-domain docking.     

Small-Angle X-Ray Scattering Reveals Compact Domain-Domain Interactions in the N-Terminal Region of Filamin C

Filamins are multi-domain, actin cross-linking, and scaffolding proteins. In addition to the actin cross-linking function, filamins have a role in mechanosensor signaling. The mechanosensor function is mediated by domain-domain interaction in the C-terminal region of filamins. Recently, we have shown that there is a three-domain interaction module in the N-terminal region of filamins, where the neighboring domains stabilize the structure of the middle domain and thereby regulate its interaction with ligands. In this study, we have used small-angle X-ray scattering as a tool to screen for potential domain-domain interactions in the N-terminal region. We found evidence of four domain-domain interactions with varying flexibility. These results confirm our previous study showing that domains 3, 4, and 5 exist as a compact three domain module. In addition, we report interactions between domains 11–12 and 14–15, which are thus new candidate sites for mechanical regulation.     

Biological units and their effect upon the properties and prediction of protein-protein interactions

Structural data as collated in the Protein Data Bank (PDB) have been widely applied in the study and prediction of protein-protein interactions. However, since the basic PDB Entries contain only the contents of the asymmetric unit rather than the biological unit, some key interactions may be missed by analysing only the PDB Entry. A total of 69,054 SCOP (Structural Classification of Proteins) domains were examined systematically to identify the number of additional novel interacting domain pairs and interfaces found by considering the biological unit as stored in the PQS (Protein Quaternary Structure) database. The PQS data adds 25,965 interacting domain pairs to those seen in the PDB Entries to give a total of 61,783 redundant interacting domain pairs. Redundancy filtering at the level of the SCOP family shows PQS to increase the number of novel interacting domain-family pairs by 302 (13.3%) from 2277, but only 16/302 (1.4%) of the interacting domain pairs have the two domains in different SCOP families. This suggests the biological units add little to the elucidation of novel biological interaction networks. However, when the orientation of the domain pairs is considered, the PQS data increases the number of novel domain-domain interfaces observed by 1455 (34.5%) to give 5677 non-redundant domain-domain interfaces. In all, 162/1455 novel domain-domain interfaces are between domains from different families, an increase of 8.9% over the PDB Entries. Overall, the PQS biological units provide a rich source of novel domain-domain interfaces that are not seen in the studied PDB Entries, and so PQS domain-domain interaction data should be exploited wherever possible in the analysis and prediction of protein-protein interactions.     

Decomposing protein networks into domain-domain interactions

The application of novel experimental techniques has generated large networks of protein-protein interactions. Frequently, important information on the structure and cellular function of protein-protein interactions can be gained from the domains of interacting proteins. We have designed a Cytoscape plugin that decomposes interacting proteins into their respective domains and computes a putative network of corresponding domain-domain interactions. To this end, the network graph of proteins has been extended by additional node and edge types for domain interactions, including different node and edge shapes and coloring schemes used for visualization. An additional plugin provides supplementary web links to Internet resources on domain function and structure. AVAILABILITY: Both Cytoscape plugins can be downloaded from http://www.cytoscape.org     

Prediction of protein-protein interactions using random decision forest framework

MOTIVATION: Protein interactions are of biological interest because they orchestrate a number of cellular processes such as metabolic pathways and immunological recognition. Domains are the building blocks of proteins; therefore, proteins are assumed to interact as a result of their interacting domains. Many domain-based models for protein interaction prediction have been developed, and preliminary results have demonstrated their feasibility. Most of the existing domain-based methods, however, consider only single-domain pairs (one domain from one protein) and assume independence between domain-domain interactions. RESULTS: In this paper, we introduce a domain-based random forest of decision trees to infer protein interactions. Our proposed method is capable of exploring all possible domain interactions and making predictions based on all the protein domains. Experimental results on Saccharomyces cerevisiae dataset demonstrate that our approach can predict protein-protein interactions with higher sensitivity (79.78%) and specificity (64.38%) compared with that of the maximum likelihood approach. Furthermore, our model can be used to infer interactions not only for single-domain pairs but also for multiple domain pairs.     

A genome-wide Ras-effector interaction network

Here using structural information and protein design tools we have drawn the network of interactions between 20 Ras subfamily proteins with 50 putative Ras binding domains. To validate this network we have cloned six poorly characterized Ras binding domains (RBD) and two Ras proteins (RERG, DiRas1). These, together with previously described RBD domains, Ras and Rap proteins have been analyzed in 70 pull-down experiments. Comparing our interaction network with these and previous pull-down experiments (total of 150 cases) shows a very high accuracy for distinguishing between binders and non-binders ( approximately 0.80). Bioinformatics information was integrated to distinguish those in vitro interactions that are more likely to be relevant in vivo. We proposed several new interactions between Ras family members and effector domains that are of relevance in understanding the physiological role of these proteins. More broadly our results demonstrate that (domain-domain) interaction specificities between members of protein families can be accurately predicted using structural information.     

Domain-domain interactions underlying herpesvirus-human protein-protein interaction networks

Protein-domains play an important role in mediating protein-protein interactions. Furthermore, the same domain-pairs mediate different interactions in different contexts and in various organisms, and therefore domain-pairs are considered as the building blocks of interactome networks. Here we extend these principles to the host-virus interface and find the domain-pairs that potentially mediate human-herpesvirus interactions. Notably, we find that the same domain-pairs used by other organisms for mediating their interactions underlie statistically significant fractions of human-virus protein inter-interaction networks. Our analysis shows that viral domains tend to interact with human domains that are hubs in the human domain-domain interaction network. This may enable the virus to easily interfere with a variety of mechanisms and processes involving various and different human proteins carrying the relevant hub domain. Comparative genomics analysis provides hints at a molecular mechanism by which the virus acquired some of its interacting domains from its human host.     

A comparison of SCOP and CATH with respect to domain-domain interactions

The analysis and prediction of protein-protein interaction sites from structural data are restricted by the limited availability of structural complexes that represent the complete protein-protein interaction space. The domain classification schemes CATH and SCOP are normally used independently in the analysis and prediction of protein domain-domain interactions. In this article, the effect of different domain classification schemes on the number and type of domain-domain interactions observed in structural data is systematically evaluated for the SCOP and CATH hierarchies. Although there is a large overlap in domain assignments between SCOP and CATH, 23.6% of CATH interfaces had no SCOP equivalent and 37.3% of SCOP interfaces had no CATH equivalent in a nonredundant set. Therefore, combining both classifications gives an increase of between 23.6 and 37.3% in domain-domain interfaces. It is suggested that if possible, both domain classification schemes should be used together, but if only one is selected, SCOP provides better coverage than CATH. Employing both SCOP and CATH reduces the false negative rate of predictive methods, which employ homology matching to structural data to predict protein-protein interaction by an estimated 6.5%.     

Including probe-level uncertainty in model-based gene expression clustering

Background

Knowing which proteins exist in a certain organism or cell type and how these proteins interact with each other are necessary for the understanding of biological processes at the whole cell level. The determination of the protein-protein interaction (PPI) networks has been the subject of extensive research. Despite the development of reasonably successful methods, serious technical difficulties still exist. In this paper we present DomainGA, a quantitative computational approach that uses the information about the domain-domain interactions to predict the interactions between proteins.

Results

DomainGA is a multi-parameter optimization method in which the available PPI information is used to derive a quantitative scoring scheme for the domain-domain pairs. Obtained domain interaction scores are then used to predict whether a pair of proteins interacts. Using the yeast PPI data and a series of tests, we show the robustness and insensitivity of the DomainGA method to the selection of the parameter sets, score ranges, and detection rules. Our DomainGA method achieves very high explanation ratios for the positive and negative PPIs in yeast. Based on our cross-verification tests on human PPIs, comparison of the optimized scores with the structurally observed domain interactions obtained from the iPFAM database, and sensitivity and specificity analysis; we conclude that our DomainGA method shows great promise to be applicable across multiple organisms.

Conclusion

We envision the DomainGA as a first step of a multiple tier approach to constructing organism specific PPIs. As it is based on fundamental structural information, the DomainGA approach can be used to create potential PPIs and the accuracy of the constructed interaction template can be further improved using complementary methods. Explanation ratios obtained in the reported test case studies clearly show that the false prediction rates of the template networks constructed using the DomainGA scores are reasonably low, and the erroneous predictions can be filtered further using supplementary approaches such as those based on literature search or other prediction methods.     

Linear Motif-Mediated Interactions Have Contributed to the Evolution of Modularity in Complex Protein Interaction Networks

The modular architecture of protein-protein interaction (PPI) networks is evident in diverse species with a wide range of complexity. However, the molecular components that lead to the evolution of modularity in PPI networks have not been clearly identified. Here, we show that weak domain-linear motif interactions (DLIs) are more likely to connect different biological modules than strong domain-domain interactions (DDIs). This molecular division of labor is essential for the evolution of modularity in the complex PPI networks of diverse eukaryotic species. In particular, DLIs may compensate for the reduction in module boundaries that originate from increased connections between different modules in complex PPI networks. In addition, we show that the identification of biological modules can be greatly improved by including molecular characteristics of protein interactions. Our findings suggest that transient interactions have played a unique role in shaping the architecture and modularity of biological networks over the course of evolution.     

Computational analysis of human protein interaction networks

Large amounts of human protein interaction data have been produced by experiments and prediction methods. However, the experimental coverage of the human interactome is still low in contrast to predicted data. To gain insight into the value of publicly available human protein network data, we compared predicted datasets, high-throughput results from yeast two-hybrid screens, and literature-curated protein-protein interactions. This evaluation is not only important for further methodological improvements, but also for increasing the confidence in functional hypotheses derived from predictions. Therefore, we assessed the quality and the potential bias of the different datasets using functional similarity based on the Gene Ontology, structural iPfam domain-domain interactions, likelihood ratios, and topological network parameters. This analysis revealed major differences between predicted datasets, but some of them also scored at least as high as the experimental ones regarding multiple quality measures. Therefore, since only small pair wise overlap between most datasets is observed, they may be combined to enlarge the available human interactome data. For this purpose, we additionally studied the influence of protein length on data quality and the number of disease proteins covered by each dataset. We could further demonstrate that protein interactions predicted by more than one method achieve an elevated reliability.