Rational disruption of the oligomerization of the mini-ferritin E. coli DPS through protein-protein interface mutation

DNA-binding protein from starved cells (DPS), a mini-ferritin capable of self-assembling into a 12-meric nano-cage, was chosen as the basis for an alanine-shaving mutagenesis study to investigate the importance of key amino acid residues, located at symmetry-related protein-protein interfaces, in controlling protein stability and self-assembly. Nine mutants were designed through simple inspection, synthesized, and subjected to transmission electron microscopy, circular dichroism, size exclusion chromatography, and "virtual alanine scanning" computational analysis. The data indicate that many of these residues may be hot spot residues. Most remarkably, two residues, R83 and R133, were observed to shift the oligomerization state to ~50% dimer. Based on the hypothesis that these two residues constitute a "hot strip," located at the ferritin-like threefold axis, the double mutant was generated which completely shuts down detectable formation of 12-mer in solution, favoring a cooperatively folded dimer. The fact that this effect logically builds upon the single mutants emphasizes that complex self-assembly has the potential to be manipulated rationally. This study should have an impact on the fundamental understanding of the assembly of DPS protein cages specifically and protein quaternary structure in general. In addition, as there is much interest in applying these and similar systems to the templation of nano-materials and drug delivery, the ability to control this ferritin's oligomerization state and stability could prove especially valuable.     

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.     

Improving coiled-coil stability by optimizing ionic interactions

Alpha-helical coiled coils are a common protein oligomerization motif stabilized mainly by hydrophobic interactions occurring along the coiled-coil interface. We have recently designed and solved the structure of a two-heptad repeat coiled-coil peptide that is stabilized further by a complex network of inter- and intrahelical salt-bridges in addition to the hydrophobic interactions. Here, we extend and improve the de novo design of this two heptad-repeat peptide by four newly designed peptides characterized by different types of ionic interactions. The contribution of these different types of ionic interactions to coiled-coil stability are analyzed by CD spectroscopy and analytical ultracentrifugation. We show that all peptides are highly alpha-helical and two of them are 100% dimeric under physiological conditions. Furthermore, we have solved the X-ray structure of the most stable of these peptides and the rational design principles are verified by comparing this structure to the structure of the parent peptide. We show that by combining the most favorable inter- and intrahelical salt-bridge arrangements it is possible to design coiled-coil oligomerization domains with improved stability properties.     

Dimerization of a flocculent protein from Moringa oleifera: experimental evidence and in silico interpretation

Many proteins exist in dimeric and other oligomeric forms to gain stability and functional advantages. In this study, the dimerization property of a coagulant protein (MO_2.1) from Moringa oleifera seeds was addressed through laboratory experiments, protein–protein docking studies and binding free energy calculations. The structure of MO_2.1 was predicted by homology modelling, while binding free energy and residues-distance profile analyses provided insight into the energetics and structural factors for dimer formation. Since the coagulation activities of the monomeric and dimeric forms of MO_2.1 were comparable, it was concluded that oligomerization does not affect the biological activity of the protein.     

Coiled coils: a highly versatile protein folding motif

The alpha-helical coiled coil is one of the principal subunit oligomerization motifs in proteins. Its most characteristic feature is a heptad repeat pattern of primarily apolar residues that constitute the oligomer interface. Despite its simplicity, it is a highly versatile folding motif: coiled-coil-containing proteins exhibit a broad range of different functions related to the specific 'design' of their coiled-coil domains. The architecture of a particular coiled-coil domain determines its oligomerization state, rigidity and ability to function as a molecular recognition system. Much progress has been made towards understanding the factors that determine coiled-coil formation and stability. Here we discuss this highly versatile protein folding and oligomerization motif with regard to its structural architecture and how this is related to its biological functions.     

Folding and stability of a primitive protein

We have previously attempted to simulate domain creation in early protein evolution by recombining polypeptide segments from non-homologous proteins, and we have described the structure of one such de novo protein, 1b11, a segment-swapped tetramer with novel architecture. Here, we have analyzed the thermodynamic stability and folding kinetics of the 1b11 tetramer and its monomeric and dimeric intermediates, and of 1b11 mutants with changes at the domain interface. Denatured 1b11 polypeptides fold into transient, folded monomers with marginal stability (DeltaG<1kcalmol(-1)) which convert rapidly ( approximately 6x10(4)M(-1)s(-1)) into dimers (DeltaG=9.8kcal/mol) and then more slowly ( approximately 3M(-1)s(-1)) into tetramers (DeltaG=28kcalmol(-1)). Segment swapping takes place during dimerization, as suggested by mass spectroscopic analysis of covalently linked peptides derived from proteolysis of a disulfide-linked dimer. Our results confirm that segment swapping and associated oligomerization are both powerful ways of stabilizing proteins, and we suggest that this may have been a feature of early protein evolution.     

Engineering a thermostable protein with two DNA-binding domains using the hyperthermophile protein Sac7d

The acid- and thermostable Sac7d is a small, non-specific DNA-binding protein of the hyperthermophile archaea Sulfolobus acidocaldarius. In this study, Sac7d was employed as a structural unit in the design of a thermostable protein containing two putative DNA-binding domains. By linking two Sac7d proteins together and comparing the DNA interaction of dimer to that of monomer, this study may provide structural insights into other dimeric DNA-binding proteins. The engineered protein, Sac7dK66C, was over-expressed and purified. Dimeric Sac7d was obtained by cross-linking two mutant Sac7d molecules through the C-terminal disulfide bond. Thermal stability and DNA-binding ability of dimeric Sac7d were assessed and compared to those of wild type Sac7d by gel retardation assay, circular dichroism spectroscopy, and crystallization experiments. Dimeric Sac7d was shown to be equally thermostable as wild type, and its ability to stabilize DNA duplex is the same as wild type. However, the interaction of dimeric Sac7d with DNA diverged from that of wild type, suggesting different DNA-binding modes for dimeric Sac7d. In addition, a large difference in extinction coefficient was observed in all dimer/DNA CD spectra, which was reminiscent of the spectrum of Psi-DNA. Conjugation of various chemical groups to mutant Sac7d is possible through the C-terminal thiol group. This offers a possible approach in the design of a thermostable biomolecule with novel functions.     

The crystal structure of the calcium-bound con-G[Q6A] peptide reveals a novel metal-dependent helical trimer

The ability to form and control both secondary structure and oligomerization in short peptides has proven to be challenging owing to the structural instability of such peptides. The conantokin peptides are a family of γ-carboxyglutamic acid containing peptides produced in the venoms of predatory sea snails of the Conus family. They are examples of short peptides that form stable helical structures, especially in the presence of divalent cations. Both monomeric and dimeric conantokin peptides have been identified and represent a new mechanism of helix association, “the metallozipper motif” that is devoid of a hydrophobic interface between monomers. In the present study, a parallel/antiparallel three-helix bundle was identified and its crystal structure determined at high resolution. The three helices are almost perfectly parallel and represent a novel helix–helix association. The trimer interface is dominated by metal chelation between the three helices, and contains no interfacial hydrophobic interactions. It is now possible to produce stable monomeric, dimeric, or trimeric metallozippers depending on the peptide sequence and metal ion. Such structures have important applications in protein design.     

Disrupting a key hydrophobic pair in the oligomerization interface of the actinoporins impairs their pore‐forming activity

Crystallographic data of the dimeric and octameric forms of fragaceatoxin C (FraC) suggested the key role of a small hydrophobic protein–protein interaction surface for actinoporins oligomerization and pore formation in membranes. However, site‐directed mutagenesis studies supporting this hypothesis for others actinoporins are still lacking. Here, we demonstrate that disrupting the key hydrophobic interaction between V60 and F163 (FraC numbering scheme) in the oligomerization interface of FraC, equinatoxin II (EqtII), and sticholysin II (StII) impairs the pore formation activity of these proteins. Our results allow for the extension of the importance of FraC protein–protein interactions in the stabilization of the oligomeric intermediates of StII and EqtII pointing out that all of these proteins follow a similar pathway of membrane disruption. These findings support the hybrid pore proposal as the universal model of actinoporins pore formation. Moreover, we reinforce the relevance of dimer formation, which appears to be a functional intermediate in the assembly pathway of some different pore‐forming proteins.     

Engineering a Thermostable Protein with Two DNA-binding Domains Using the Hyperthermophile Protein Sac7d

Abstract

The acid- and thermostable Sac7d is a small, non-specific DNA-binding protein of the hyperthermophile archaea Sulfolobus acidocaldarius. In this study, Sac7d was employed as a structural unit in the design of a thermostable protein containing two putative DNA-binding domains. By linking two Sac7d proteins together and comparing the DNA interaction of dimer to that of monomer, this study may provide structural insights into other dimeric DNA-binding proteins. The engineered protein, Sac7dK66C, was over-expressed and purified. Dimeric Sac7d was obtained by cross-linking two mutant Sac7d molecules through the C-terminal disulfide bond. Thermal stability and DNA-binding ability of dimeric Sac7d were assessed and compared to those of wild type Sac7d by gel retardation assay, circular dichroism spectroscopy, and crystallization experiments. Dimeric Sac7d was shown to be equally thermostable as wild type, and its ability to stabilize DNA duplex is the same as wild type. However, the interaction of dimeric Sac7d with DNA diverged from that of wild type, suggesting different DNA-binding modes for dimeric Sac7d. In addition, a large difference in extinction coefficient was observed in all dimer/DNA CD spectra, which was reminiscent of the spectrum of ψ-DNA. Conjugation of various chemical groups to mutant Sac7d is possible through the C-terminal thiol group. This offers a possible approach in the design of a thermostable biomolecule with novel functions.     

The evolutionary transition from monomeric to oligomeric proteins: tools, the environment, hypotheses

Recently, renewed interest in the evolution of oligomeric proteins has seen new approaches explored and new hypotheses proposed. The model systems chosen are generally made up of pairs of homologous proteins, each composed of a monomer and a dimeric counterpart, but the question has been also approached by comparing statistically significant structural patterns in sets of monomeric and oligomeric proteins. Here the tools of genetics and chemistry potentially available to the evolution of oligomeric proteins are discussed, as well as the possible effects of environments on the early attempts to oligomerization. Traces of an ancestral monomeric status of oligomers may be detected in the significant presence of polar and charged residues at intersubunit interfaces, and by the recognition that, besides the hydrophobic effect, a 'hydrophilic' effect has also had a role in the construction of these interfaces. The traditional 'mutation' model is described and found to be based on a hierarchy of mutations, crowned by a 'primary' mutation, one that could prime oligomerization by irreversibly altering the structure of an ancestral monomer. The mechanism of oligomerization based on the exchange or 'swap' of structural elements between monomers is discussed. The possibility is also discussed that the main steps in the folding pathway of an oligomeric protein reiterate the main steps in its evolution.     

Dimer dissociation is a key energetic event in the fold-switch pathway of KaiB

Cyanobacteria possesses the simplest circadian clock, composed of three proteins that act as a phosphorylation oscillator: KaiA, KaiB, and KaiC. The timing of this oscillator is determined by the fold-switch of KaiB, a structural rearrangement of its C-terminal half that is accompanied by a change in the oligomerization state. During the day, KaiB forms a stable tetramer (gsKaiB), whereas it adopts a monomeric thioredoxin-like fold during the night (fsKaiB). Although the structures and functions of both native states are well studied, little is known about the sequence and structure determinants that control their structural interconversion. Here, we used confinement molecular dynamics (CCR-MD) and folding simulations using structure-based models to show that the dissociation of the gsKaiB dimer is a key energetic event for the fold-switch. Hydrogen-deuterium exchange mass spectrometry (HDXMS) recapitulates the local stability of protein regions reported by CCR-MD, with both approaches consistently indicating that the energy and backbone flexibility changes are solely associated with the region that fold-switches between gsKaiB and fsKaiB and that the localized regions that differentially stabilize gsKaiB also involve regions outside the dimer interface. Moreover, two mutants (R23C and R75C) previously reported to be relevant for altering the rhythmicity of the Kai clock were also studied by HDXMS. Particularly, R75C populates dimeric and monomeric states with a deuterium incorporation profile comparable to the one observed for fsKaiB, emphasizing the importance of the oligomerization state of KaiB for the fold-switch. These findings suggest that the information necessary to control the rhythmicity of the cyanobacterial biological clock is, to a great extent, encoded within the KaiB sequence.     

Salt bridges regulate both dimer formation and monomeric flexibility in HdeB and may have a role in periplasmic chaperone function

Escherichia coli and Gram-negative bacteria that live in the human gut must be able to tolerate rapid and large changes in environmental pH. Low pH irreversibly denatures and precipitates many bacterial proteins. While cytoplasmic proteins are well buffered against such swings, periplasmic proteins are not. Instead, it appears that some bacteria utilize chaperone proteins that stabilize periplasmic proteins, preventing their precipitation. Two highly expressed and related proteins, HdeA and HdeB, have been identified as acid-activated chaperones. The structure of HdeA is known and a mechanism for activation has been proposed. In this model, dimeric HdeA dissociates at low pH, and the exposed dimeric interface binds exposed hydrophobic surfaces of acid-denatured proteins, preventing their irreversible aggregation. We now report the structure and biophysical characterization of the HdeB protein. The monomer of HdeB shares a similar structure with HdeA, but its dimeric interface is different in composition and spatial location. We have used fluorescence to study the behavior of HdeB as pH is lowered, and like HdeA, it dissociates to monomers. We have identified one of the key intersubunit interactions that controls pH-induced monomerization. Our analysis identifies a structural interaction within the HdeB monomer that is disrupted as pH is lowered, leading to enhanced structural flexibility.     

Characterization of domain interfaces in monomeric and dimeric ATP synthase

We disassembled monomeric and dimeric yeast ATP synthase under mild conditions to identify labile proteins and transiently stable subcomplexes that had not been observed before. Specific removal of subunits alpha, beta, oligomycin sensitivity conferring protein (OSCP), and h disrupted the ATP synthase at the gamma-alpha(3)beta(3) rotor-stator interface. Loss of two F(1)-parts from dimeric ATP synthase led to the isolation of a dimeric subcomplex containing membrane and peripheral stalk proteins thus identifying the membrane/peripheral stalk sectors immediately as the dimerizing parts of ATP synthase. Almost all subunit a was found associated with a ring of 10 c-subunits in two-dimensional blue native/SDS gels. We therefore postulate that c10a1-complex is a stable structure in resting ATP synthase until the entry of protons induces a breaking of interactions and stepwise rotation of the c-ring relative to the a-subunit in the catalytic mechanism. Dimeric subunit a was identified in SDS gels in association with two c10-rings suggesting that a c10a2c10-complex may constitute an important part of the monomer-monomer interface in dimeric ATP synthase that seems to be further tightened by subunits b, i, e, g, and h. In contrast to the monomer-monomer interface, the interface between dimers in higher oligomeric structures remains largely unknown. However, we could show that the natural inhibitor protein Inh1 is not required for oligomerization.     

Structural features of the G-protein/GPCR interactions

Background

The details of the functional interaction between G proteins and the G protein coupled receptors (GPCRs) have long been subjected to extensive investigations with structural and functional assays and a large number of computational studies.

Scope of review

The nature and sites of interaction in the G-protein/GPCR complexes, and the specificities of these interactions selecting coupling partners among the large number of families of GPCRs and G protein forms, are still poorly defined.

Major conclusions

Many of the contact sites between the two proteins in specific complexes have been identified, but the three dimensional molecular architecture of a receptor-Gα interface is only known for one pair. Consequently, many fundamental questions regarding this macromolecular assembly and its mechanism remain unanswered.

General significance

In the context of current structural data we review the structural details of the interfaces and recognition sites in complexes of sub-family A GPCRs with cognate G-proteins, with special emphasis on the consequences of activation on GPCR structure, the prevalence of preassembled GPCR/G-protein complexes, the key structural determinants for selective coupling and the possible involvement of GPCR oligomerization in this process.     

The tetrameric α-helical membrane protein GlpF unfolds via a dimeric folding intermediate

Many membrane proteins appear to be present and functional in higher-order oligomeric states. While few studies have analyzed the thermodynamic stability of α-helical transmembrane (TM) proteins under equilibrium conditions in the past, oligomerization of larger polytopic monomers has essentially not yet been studied. However, it is vital to study the folding of oligomeric membrane proteins to improve our understanding of the general mechanisms and pathways of TM protein folding. To investigate the folding and stability of the aquaglyceroporin GlpF from Escherichia coli, unfolding of the protein in mixed micelles was monitored by steady-state fluorescence and circular dichroism spectroscopy as well as by seminative sodium dodecyl sulfate-polyacrylamide gel electrophoresis analyses. On the basis of our results, it appears most likely that GlpF unfolds in a two-step process, involving the equilibrium of tetrameric, dimeric, and monomeric GlpF species. A kinetic analysis also indicates an intermediate along the kinetic GlpF unfolding pathway, and thus, two phases are involved in GlpF unfolding. While three-state unfolding pathways and a dimeric folding intermediate are not uncommon for water-soluble proteins, a stable (un)folding intermediate with a decreased oligomeric structure has not been detected or reported for any α-helical membrane protein.     

Irreversible formation of intermediate BSA oligomers requires and induces conformational changes

Understanding the relation between protein conformational changes and aggregation, and the physical mechanisms leading to such processes, is of primary importance, due to its direct relation to a vast class of severe pathologies. Growing evidence also suggests that oligomeric intermediates, which may occur early in the aggregation pathway, can be themselves pathogenic. The possible cytotoxicity of oligomers of non-disease-associated proteins adds generality to such suggestion and to the interest of studies of oligomer formation. Here we study the early stages of aggregation of Bovine Serum Albumin (BSA), a non pathogenic protein which has proved to be a useful model system. Dynamic light scattering and circular dichroism measurements in kinetic experiments following step-wise temperature rises, show that the "intermediate" form, which initiates large-scale aggregation, is the result of structural and conformational changes and concurrent formation of oligomers, of average size in the range of 100-200 A. Two distinct thresholds are observed. Beyond the first one oligomerization starts and causes partial irreversibility of conformational changes. Beyond the second threshold, additional secondary structural changes occurring in proteins being recruited progress on the same time scale of oligomerization. The concurrent behavior causes a mutual stabilization of oligomerization, and of structural and conformational changes, evidenced by a progressive increase of their irreversibility. This process interaction appears to be pivotal in producing irreversible oligomers.     

Comprehensive mutagenesis of HIV-1 protease: a computational geometry approach

A computational geometry technique based on Delaunay tessellation of protein structure, represented by C(alpha) atoms, is used to study effects of single residue mutations on sequence-structure compatibility in HIV-1 protease. Profiles of residue scores derived from the four-body statistical potential are constructed for all 1881 mutants of the HIV-1 protease monomer and compared with the profile of the wild-type protein. The profiles for an isolated monomer of HIV-1 protease and the identical monomer in a dimeric state with an inhibitor are analyzed to elucidate changes to structural stability. Protease residues shown to undergo the greatest impact are those forming the dimer interface and flap region, as well as those known to be involved in inhibitor binding.     

Structural and functional roles for beta-strand 7 in the alpha-crystallin domain of p26, a polydisperse small heat shock protein from Artemia franciscana

Oviparous development in the extremophile crustacean, Artemia franciscana, generates encysted embryos which enter a profound state of dormancy, termed diapause. Encystment is marked by the synthesis of p26, a polydisperse small heat shock protein thought to protect embryos from stress. In order to elucidate structural/functional relationships within p26 and other polydisperse small heat shock proteins, and to better define the protein's role during diapause, amino acid substitutions R110G, F112R, R114A and Y116D were generated within the p26 alpha-crystallin domain by site-directed mutagenesis. These residues were chosen because they are highly conserved across species boundaries, and molecular modelling indicates that they are part of a key structural interface between dimers. The F112R mutation, which had the greatest impact on oligomerization, placed two charged residues at the p26 dimer-dimer interface, demonstrating the importance of beta-strand 7 in tetramer formation. All mutated versions of p26 were less able than wild-type p26 to confer thermotolerance on transformed bacteria and they exhibited diminished chaperone action in three in vitro assays; however, all variants retained protective activity. This apparent stability of p26 may, by prolonging effective chaperone life in vivo, enhance embryo stress resistance. All substitutions modified p26 intrinsic fluorescence, surface hydrophobicity and secondary structure, and the pronounced changes in variant R114A, as indicated by these physical measurements, correlated with the greatest loss of function. Although mutation R114A had the greatest effect on p26 chaperoning, it had the least on oligomerization. These results demonstrate that in contrast to many other small heat shock proteins, p26 effectiveness as a chaperone is independent of oligomerization. The results also reinforce the idea, occasioned by modelling, that R114 is removed slightly from dimer-dimer interfaces. Moreover, beta-strand 7 is shown to have an important role in oligomerization of p26, a function first proposed for this structural element upon crystallization of wheat Hsp16.9, a small heat shock protein with different quaternary structure.     

Quaternary structure is critical for protein display on capsid-like particles (CLPs): efficient generation of hepatitis B virus CLPs presenting monomeric but not dimeric and tetrameric fluorescent proteins

Self-organizing assemblies such as viral capsids may be used as symmetrical molecular platforms for the display of heterologous sequences, with applications ranging from vaccines to structural studies. The 183-amino-acid hepatitis B virus (HBV) core protein assembles spontaneously into icosahedral capsid-like particles (CLPs). The most exposed, and most immunogenic, substructure on the CLPs is a small loop that connects two long antiparallel alpha-helices which act as dimerization interface. Ninety (90) or 120 dimers multimerize into the capsid; the four-helix bundles formed by the dimers protrude as spikes from the surface. We recently demonstrated that the entire enhanced green fluorescent protein (eGFP) can be inserted into this loop, yielding CLPs that natively displayed eGFP on their surface. The central location of the insertion site requires that any insert be fixed to the carrier via both termini, with corresponding restrictions regarding insert size and structure. eGFP obviously satisfied these criteria but, surprisingly, all attempts to produce CLPs with the isostructural red fluorescent proteins DsRed1, DsRed2, and HcRed failed. Suspecting their oligomerization tendency to be responsible, we generated fusions containing instead monomeric yellow, cyan, and red fluorescent proteins (mYFP, mCFP and mRFP1). This strongly increased the yields of YFP and CFP-CLPs, and it allowed for the first time to efficiently generate red fluorescent CLPs. Hence insert quaternary structure is a highly critical factor for CLP assembly. These data have important implications for the rational design of self-assembling fusion proteins.