On the preparation, characterization, and enzymatic activity of fungal protease-gold colloid bioconjugates

We present herein details pertaining to the preparation of bioconjugates of colloidal gold with aspartic protease from the fungus Aspergillus saitoi (F-prot) and their characterization and enzymatic activity. Simple mixing of the colloidal gold and protein solutions under protein-friendly conditions (pH = 3) followed by centrifugation (to remove uncomplexed gold nanoparticles and protein molecules) results in the formation of the fungal protease-gold nanoparticle conjugates. The protein-gold nanoparticle bioconjugate was redispersed in buffer solution and indicated the formation of efficient bioconjugates with intact native protein structures. The bioconjugates in solution were characterized by UV-vis spectroscopy, fluorescence spectroscopy, and biocatalytic activity measurements while drop-dried bioconjugate films on Si (111) substrates were characterized by scanning electron microscopy (SEM), energy dispersive analysis of X-rays (EDAX), and X-ray diffraction (XRD) measurements. Microscopy images do show some aggregate formation, but the intactness of the native structure of the enzyme in the bioconjugate material was verified by fluorescence and biocatalytic activity measurements. The enzyme retains substantial biocatalytic activity in the bioconjugate material and was comparable to that of free enzyme in solution.     

Biogenic synthesis of floral-shaped gold nanoparticles using a novel strain,Talaromyces flavus

A biogenic route was adopted towards the synthesis of gold nanoparticles using the extract of a novel strain, Talaromyces flavus. Reduction of chloroauric acid by the fungal extract resulted in the production of gold nanoparticle, which was further confirmed by the concordant results obtained from UV–visible spectroscopy, energy dispersive spectroscopy (EDS), and dynamic light scattering (DLS) analysis. Morphology and the crystal nature of the synthesized nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD) and selected area electron diffraction (SAED). A direct correlation was observed between nanoparticle formation and the concentration of reducing agent present in the fungal extract. The time-dependent kinetic study revealed that the bioreduction process follows an autocatalytic reaction. Crystalline, irregular, and mostly flower-shaped gold nanoparticles with a mean hydrodynamic radius of 38.54?±?10.34 nm were obtained. pH played a significant role on production of mono-dispersed nanoparticle. FTIR analysis partially deciphered the involvement of –NH₂, ?SH, and –CO groups as the probable molecules in the bio-reduction and stabilization process. Compared to the conventional methods, a time-resolved, green, and economically viable method for floral-shaped nanoparticle synthesis was developed.     

Glycolic acid-g-chitosan-gold nanoflower nanocomposite scaffolds for drug delivery and tissue engineering

This paper reports a simple novel method for the synthesis of flower like gold nanoparticle (three dimensional branched nanoparticle) with >30 tips, under controlled temperature condition. Formation of flower like Au nanoparticle was confirmed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Next step of this paper reveals the potential use of novel hybrids of chitosan-g-glycolic acid and gold nanoflower (AuNF) in controlled drug delivery and tissue engineering applications. The drug loaded novel nanohybrid scaffold is prepared by freeze drying of grafted polymer solution. Grafting of glycolic acid to the chitosan and incorporation of drug were evaluated by Fourier transform infrared spectroscopy (FTIR). The nanohybrid scaffolds were found to be stable towards the pH of the medium. The cell viability study shows that prepared nanohybrid scaffolds are biocompatible. Gold nanoflowers were found to control the drug release rate in the buffer solution (pH 7.4). Therefore, for the glycolic acid grafted chitosan based system, gold nanoflowers are the viable additive for drug delivery.     

Guanidine hydrochloride can induce amyloid fibril formation from hen egg-white lysozyme

The formation of amyloid fibrils is an intractable problem in which normally soluble protein polymerizes and forms insoluble ordered aggregates. Such aggregates can range from being a nuisance in vitro to being toxic in vivo. The latter is true for lysozyme, which has been shown to form toxic deposits in humans. In the present study, the effects of partial denaturation of hen egg-white lysozyme via incubation in a concentrated solution of the denaturant guanidine hydrochloride are investigated. Results show that when lysozyme is incubated under moderate guanidine hydrochloride concentrations (i.e., 2-5 M), where lysozyme is partially unfolded, fibrils form rapidly. Thioflavin T, Congo red, X-ray diffraction, transmission electron microscopy, atomic force microscopy, and circular dichroism spectroscopy are all used to verify the production of fibrils under these conditions. Incubation at very low or very high guanidine hydrochloride concentrations fails to produce fibrils. At very low denaturant concentrations, the structure of lysozyme is fully native and very stable. On the other hand, at very high denaturant concentrations, guanidine hydrochloride is capable of dissolving and dis-aggregating fibrils that are formed. Raising the temperature and/or concentration of lysozyme accelerates fibril formation by further adding to the concentration of partially unfolded species. The addition of preformed fibrils also accelerates fibril formation but only under partially unfolding conditions. The results presented here provide further evidence that partial unfolding is a prerequisite to fibril formation. Partial denaturation can accelerate fibril formation in much the same way that mutations have been shown to accelerate fibril formation.     

The molecular interaction of a protein in highly concentrated solution investigated by Raman spectroscopy

We used Raman spectroscopy to investigate the structure and interactions of lysozyme molecules in solution over a wide range of concentrations (2.5–300 mg ml^?1). No changes in the amide‐I band were observed as the concentration was increased, but the width of the Trp band at 1555 cm^?1 and the ratios of the intensities of the Tyr bands at 856 and 837 cm^?1, the Trp bands at 870 and 877 cm^?1, and the bands at 2940 (CH stretching) and 3420 cm^?1 (OH stretching) changed as the concentration was changed. These results reveal that although the distance between lysozyme molecules changed by more than an order of magnitude over the tested concentration range, the secondary structure of the protein did not change. The changes in the molecular interactions occurred in a stepwise process as the order of magnitude of the distance between molecules changed. These results suggest that Raman bands can be used as markers to investigate the behavior of high‐concentration solutions of proteins and that the use of Raman spectroscopy will lead to progress in our understanding not only of the basic science of protein behavior under concentrated (i.e., crowded) conditions but also of practical processes involving proteins, such as in the field of biopharmaceuticals. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 237–246, 2015.     

Investigation of self-assembling proline- and glycine-rich recombinant proteins and peptides inspired by proteins from a symbiotic fungus using atomic force microscopy and circular dichroism spectroscopy

Fiber-forming proteins and peptides are being scrutinized as a promising source of building blocks for new nanomaterials. Arabinogalactan-like (AGL) proteins expressed at the symbiotic interface between plant roots and arbuscular mycorrhizal fungi have novel sequences, hypothesized to form polyproline II (PPII) helix structures. The functional nature of these proteins is unknown but they may form structures for the establishment and maintenance of fungal hyphae. Here we show that recombinant AGL1 (rAGL1) and recombinant AGL3 (rAGL3) are extended proteins based upon secondary structural characteristics determined by electronic circular dichroism (CD) spectroscopy and can self-assemble into fibers and microtubes as observed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). CD spectroscopy results of synthetic peptides based on repeat regions in AGL1, AGL2 and AGL3 suggest that the synthetic peptides contain significant amounts of extended PPII helices and that these structures are influenced by ionic strength and, at least in one case, by concentration. Point mutations of a single residue of the repeat region of AGL3 resulted in altered secondary structures. Self-assembly of these repeats was observed by means of AFM and optical microscopy. Peptide (APADGK)(6) forms structures with similar morphology to rAGL1 suggesting that these repeats are crucial for the morphology of rAGL1 fibers. These novel self-assembling sequences may find applications as precursors for bioinspired nanomaterials.     

Thermally induced fibrillar aggregation of hen egg white lysozyme

We study the effect of pH and temperature on fibril formation from hen egg white lysozyme. Fibril formation is promoted by low pH and temperatures close to the midpoint temperature for protein unfolding (detected using far-ultraviolet circular dichroism). At the optimal conditions for fibril formation (pH 2.0, T = 57 degrees C), on-line static light-scattering shows the formation of fibrils after a concentration-independent lag time of approximately 48 h. Nucleation presumably involves a change in the conformation of individual lysozyme molecules. Indeed, long-term circular dichroism measurements at pH 2.0, T = 57 degrees C show a marked change of the secondary structure of lysozyme molecules after approximately 48 h of heating. From atomic force microscopy we find that most of the fibrils have a thickness of approximately 4 nm. These fibrils have a coiled structure with a periodicity of approximately 30 nm and show characteristic defects after every four or five turns.     

Studies on lysozyme modifications induced by substituted p-benzoquinones

Protein misfolding can facilitate a protein damaging process and makes it susceptible to a series of events such as unfolding, adduct formation, oligomerization, or aggregation. Loss of a protein’s native structure may result in its biological malfunction and/or cellular toxicity that could cause associated diseases. Several factors were identified for causing structural changes of a protein, however quinone-induced protein modifications received very little attention whether for amyloidal or non-amyloidal proteins. In this paper, we report our investigation on lysozyme modifications upon treatment with selected benzoquinones (BQs), utilizing fluorescence spectroscopy including anisotropy determination, UV–Vis spectroscopy, and SDS-PAGE. Lysozyme was reacted with substituted BQs in order to examine substituent effects on protein modifications. In addition, we evaluated lysozyme modifications induced by 1,4-benzoquinone in concentration-, pH-, temperature-, and time-dependent studies. Our study shows that all BQs can readily modify lysozyme in a complex manner through adduct formation, oligomerization, polymeric aggregation, and/or fibrilization. Electrochemical properties of selected BQs were monitored using cyclic voltammetry in phosphate buffered aqueous solution, and it was found that quinone reduction potentials correlate well with their reactivity trend toward lysozyme.     

Effects of p-benzoquinone and melatonin on amyloid fibrillogenesis of hen egg-white lysozyme

More than 20 different human proteins can fold abnormally resulting in the formation of pathological deposits and several lethal degenerative diseases. Despite extensive investigations on amyloid fibril formation, the detailed molecular mechanism remained far from complete. In this work, utilizing hen egg-white lysozymes as a model system, two objectives were pursued: (1) to search for suitable conditions for producing amyloid fibrils and (2) to investigate inhibitory activities of two potential molecules against lysozyme fibril formation. Via numerous spectroscopic analyses and electron microscopy, our results showed that the formation of lysozyme amyloid fibrils at pH 2.0 was considerably increased by the addition of salt. Moreover, the inhibition of lysozyme amyloid formation by either p-benzoquinone or melatonin followed a concentration-dependent fashion. Furthermore, p-benzoquinone, in comparison with melatonin, served as a more effective inhibitor against amyloid fibril formation of lysozyme. We believe that a better understanding of how hen egg-white lysozymes aggregate will not only aid in deciphering the molecular mechanism of amyloid fibrillogenesis, but also shed light on a rational design of effective therapeutics for amyloidogenic diseases.     

Facile synthesis of Raman active phospholipid gold nanoparticles

Gold nanoparticle-based surface-enhanced Raman scattering (SERS) probes have shown promise for disease detection and diagnosis. To improve their structural and functional stability for in vivo applications, we synthesized a colloidal SERS gold nanoparticle that encapsulates Raman molecules adsorbed on 60 nm gold with a nonthiol phospholipid coating. Transmission electron microscopy and Raman and UV spectroscopy validated its reproducibility and stability. This novel lipid-based SERS probe provides a viable alternative to the PEGylation and silica coating strategies.     

Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts

Leaf extracts of two plants, Magnolia kobus and Diopyros kaki, were used for ecofriendly extracellular synthesis of metallic gold nanoparticles. Stable gold nanoparticles were formed by treating an aqueous HAuCl₄ solution using the plant leaf extracts as reducing agents. UV–visible spectroscopy was used for quantification of gold nanoparticle synthesis. Only a few minutes were required for >90% conversion to gold nanoparticles at a reaction temperature of 95 °C, suggesting reaction rates higher or comparable to those of nanoparticle synthesis by chemical methods. The synthesized gold nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and particle analysis using a particle analyzer. SEM and TEM images showed that a mixture of plate (triangles, pentagons, and hexagons) and spherical structures (size, 5–300 nm) were formed at lower temperatures and leaf broth concentrations, while smaller spherical shapes were obtained at higher temperatures and leaf broth concentrations.     

Structural studies of hen egg-white lysozyme dimer: comparison with monomer

A facile method for the formation of covalent bonds between protein molecules is zero length cross-linking. This method enables the formation of cross-links without use of any chemical reagents. Here, we report a cross-linking method for lysozyme and some structural studies as well as catalytic activity assay was performed on lysozyme dimer. The results showed that catalytic activity of lysozyme dimer was the same as monomer. Also, the GdnCl-induced equilibrium unfolding of hen egg-white lysozyme monomer and dimer at pH 2 was studied over a temperature range of 290.7-303.2 K by means of CD spectroscopy. The lack of coincidence between two unfolding curves at 222 and 289 nm in lysozyme dimer was observed, which suggested the existence of intermediate state in unfolding process, while lysozyme monomer showed a single cooperative transition. Thus, the thermodynamic parameters were estimated on the basis of two-state mechanism for lysozyme monomer and three-state one for lysozyme dimer. These results indicated that zero length cross-linking can stabilize the intermediate, so the population of intermediate increased. Our results offer a special opportunity to study the role of intermediates in protein folding mechanisms. In addition thermal unfolding of monomer and dimer in 222 nm was achieved.     

Optical investigation of the electron transfer protein azurin-gold nanoparticle system

The hybrid system obtained by conjugating the protein azurin, which is a very stable and well-described protein showing a unique interplay among its electron transfer and optical properties, with 20-nm sized gold nanoparticles has been investigated. Binding of azurin molecules to gold nanoparticle surface results in the red shift of the nanoparticle resonance plasmon band and in the quenching of the azurin single tryptophan fluorescence signal. These findings together with the estimate of the hydrodynamic radius of the composite, obtained by means of Dynamic Light Scattering, are consistent with the formation of a monolayer of protein molecules, with preserved natural folding, on nanoparticle surface. The fluorescence quenching of azurin bound molecules is explained by an energy transfer from protein to metal surface and it is discussed in terms of the involvement of the Az electron transfer route in the interaction of the protein with the nanoparticle.     

Characterization of Oligomeric Species on the Aggregation Pathway of Human Lysozyme

The aggregation process of wild-type human lysozyme at pH 3.0 and 60 °C has been analyzed by characterizing a series of distinct species formed on the aggregation pathway, specifically the amyloidogenic monomeric precursor protein, the oligomeric soluble prefibrillar aggregates, and the mature fibrils. Particular attention has been focused on the analysis of the structural properties of the oligomeric species, since recent studies have shown that the oligomers formed by lysozyme prior to the appearance of mature amyloid fibrils are toxic to cells. Here, soluble oligomers of human lysozyme have been analyzed by a range of techniques including binding to fluorescent probes such as thioflavin T and 1-anilino-naphthalene-8-sulfonate, Fourier transform infrared spectroscopy, and controlled proteolysis. Oligomers were isolated after 5 days of incubation of the protein and appear as spherical particles with a diameter of 8-17 nm when observed by transmission electron microscopy. Unlike the monomeric protein, oligomers have solvent-exposed hydrophobic patches able to bind the fluorescent probe 1-anilino-naphthalene-8-sulfonate. Fourier transform infrared spectroscopy spectra of oligomers are indicative of misfolded species when compared to monomeric lysozyme, with a prevalence of random structure but with significant elements of the β-sheet structure that is characteristic of the mature fibrils. Moreover, the oligomeric lysozyme aggregates were found to be more susceptible to proteolysis with pepsin than both the monomeric protein and the mature fibrils, indicating further their less organized structure. In summary, this study shows that the soluble lysozyme oligomers are locally unfolded species that are present at low concentration during the initial phases of aggregation. The nonnative conformational features of the lysozyme molecules of which they are composed are likely to be the factors that confer on them the ability to interact inappropriately with a variety of cellular components including membranes.     

The Non-Core Regions of Human Lysozyme Amyloid Fibrils Influence Cytotoxicity

Identifying the cause of the cytotoxicity of species populated during amyloid formation is crucial to understand the molecular basis of protein deposition diseases. We have examined different types of aggregates formed by lysozyme, a protein found as fibrillar deposits in patients with familial systemic amyloidosis, by infrared spectroscopy, transmission electron microscopy, and depolymerization experiments, and analyzed how they affect cell viability. We have characterized two types of human lysozyme amyloid structures formed in vitro that differ in morphology, molecular structure, stability, and size of the cross-β core. Of particular interest is that the fibrils with a smaller core generate a significant cytotoxic effect. These findings indicate that protein aggregation can give rise to species with different degree of cytotoxicity due to intrinsic differences in their physicochemical properties.     

Truncated forms of viral VP2 proteins fused to EGFP assemble into fluorescent parvovirus-like particles

Fluorescence correlation spectroscopy (FCS) monitors random movements of fluorescent molecules in solution, giving information about the number and the size of for example nano-particles. The canine parvovirus VP2 structural protein as well as N-terminal deletion mutants of VP2 (-14, -23, and -40 amino acids) were fused to the C-terminus of the enhanced green fluorescent protein (EGFP). The proteins were produced in insect cells, purified, and analyzed by western blotting, confocal and electron microscopy as well as FCS. The non-truncated form, EGFP-VP2, diffused with a hydrodynamic radius of 17 nm, whereas the fluorescent mutants truncated by 14, 23 and 40 amino acids showed hydrodynamic radii of 7, 20 and 14 nm, respectively. These results show that the non-truncated EGFP-VP2 fusion protein and the EGFP-VP2 constructs truncated by 23 and by as much as 40 amino acids were able to form virus-like particles (VLPs). The fluorescent VLP, harbouring VP2 truncated by 23 amino acids, showed a somewhat larger hydrodynamic radius compared to the non-truncated EGFP-VP2. In contrast, the construct containing EGFP-VP2 truncated by 14 amino acids was not able to assemble into VLP-resembling structures. Formation of capsid structures was confirmed by confocal and electron microscopy. The number of fluorescent fusion protein molecules present within the different VLPs was determined by FCS. In conclusion, FCS provides a novel strategy to analyze virus assembly and gives valuable structural information for strategic development of parvovirus-like particles.     

Analysis of ordered arrays of adsorbed lysozyme by scanning tunneling microscopy.

Scanning tunneling microscopy (STM) has been used to observe lysozyme at a graphite surface directly in order to gain mechanistic information about the molecular events involved in protein adsorption. The experiments were performed using an insulated tip in an aqueous protein solution, allowing the time course of the adsorption process to be followed, including the evolution of ordered arrays. Ordered arrays of protein molecules were observed, with lattice spacings that varied with bulk protein concentration and salt strength. Fourier analysis was used to determine the average cell dimensions of an array. From the observed lattice spacings, it was possible to estimate the surface coverage of the protein, and thus, by varying the conditions, adsorption isotherms could be obtained. These isotherms compare well with adsorption isotherms measured using total internal reflectance fluorescence (TIRF) spectroscopy on a hydrophobic surface. Since the protein is charged and the electrolyte has an effect on the isotherms, electrostatics are a likely controlling factor. Molecular electrostatics computations were thus used to investigate the possible origins of the lattice structure, and they suggest that favorable intermolecular interactions among adsorbed molecules are consistent with hydrophobically dominated protein-surface interactions.     

Inhibition of amyloid fibrillization of hen egg-white lysozymes by rifampicin and p-benzoquinone

It has been reported that more than 20 different human proteins can fold abnormally, resulting in the formation of pathological deposits and several lethal degenerative diseases. Despite extensive investigations on amyloid fibril formation, the detailed molecular mechanism remained rather elusive. The current research, utilizing hen egg-white lysozymes as a model system, is aimed at exploring inhibitory activities of two potential molecules against lysozyme fibril formation. We first demonstrated that the formation of lysozyme amyloid fibrils at pH 2.0 was markedly enhanced by the presence of agitation in comparison with its quiescent counterpart. Next, via numerous spectroscopic techniques and transmission electron microscopy, our results revealed that the inhibition of lysozyme amyloid formation by either rifampicin or its analogue p-benzoquinone followed a concentration-dependent fashion. Furthermore, while both inhibitors were shown to acquire an anti-aggregating and a disaggregating activity, rifampicin, in comparison with p-benzoquinone, served as a more effective inhibitor against in vitro amyloid fibrillogenesis of lysozyme. It is our belief that the data reported in this work will not only reinforce the findings validated by others that rifampicin and p-benzoquinone serve as two promising preventive molecules against amyloid fibrillogenesis, but also shed light on a rational design of effective therapeutics for amyloidogenic diseases.     

Controlling the diameter,monodispersity, and solubility of ApoA1 nanolipoprotein particles using telodendrimer chemistry

Nanolipoprotein particles (NLPs) are nanometer‐scale discoidal particles that feature a phospholipid bilayer confined within an apolipoprotein “scaffold,” which are useful for solubilizing hydrophobic molecules such as drugs and membrane proteins. NLPs are synthesized either by mixing the purified apolipoprotein with phospholipids and other cofactors or by cell‐free protein synthesis followed by self‐assembly of the nanoparticles in the reaction mixture. Either method can be problematic regarding the production of homogeneous and monodispersed populations of NLPs, which also currently requires multiple synthesis and purification steps. Telodendrimers (TD) are branched polymers made up of a dendritic oligo‐lysine core that is conjugated to linear polyethylene glycol (PEG) on one end, and the lysine “branches” are terminated with cholic acid moieties that enable the formation of nanomicelles in aqueous solution. We report herein that the addition of TD during cell‐free synthesis of NLPs produces unique hybrid nanoparticles that have drastically reduced polydispersity as compared to NLPs made in the absence of TD. This finding was supported by dynamic light scattering, fluorescence correlation spectroscopy, and cryo transmission electron microscopy (Cryo‐EM). These techniques demonstrate the ability of TDs to modulate both the NLP size (6–30 nm) and polydispersity. The telodendrimer NLPs (TD‐NLPs) also showed 80% less aggregation as compared to NLPs alone. Furthermore, the versatility of these novel nanoparticles was shown through direct conjugation of small molecules such as fluorescent dyes directly to the TD as well as the insertion of a functional membrane protein.     

Amyloid protofilament formation of hen egg lysozyme in highly concentrated ethanol solution

Mutant human lysozymes (Ile56Thr & Asp67His) have been reported to form amyloid deposits in the viscera. From the standpoint of understanding the mechanism of amyloid formation, we searched for conditions of amyloid formation in vitro using hen egg lysozyme, which has been extensively studied from a physicochemical standpoint. It was found that the circular dichroism spectra in the far-ultraviolet region of the hen egg lysozyme changed to those characteristic of a beta-structure from the native alpha-helix rich spectrum in 90% ethanol solution. When the concentration of protein was increased to 10 mg/mL, the protein solution formed a gel in the presence of 90% ethanol, and precipitated on further addition of 10 mM NaCl. The precipitates were examined by electron microscopy, their ability to bind Congo red, and X-ray diffraction to determine whether amyloid fibrils were formed in the precipitates. Electron micrographs displayed unbranched protofilament with a diameter of approximately 70 A. The peak point of the difference spectrum for the Congo red binding assay was 541 nm, which is characteristic of amyloid fibrils. The X-ray diffraction pattern showed a sharp and intense diffraction ring at 4.7 A, a reflection that arises from the interstrand spacing in beta-sheets. These results indicate that the precipitates of hen egg lysozyme are amyloid protofilament, and that the amyloid protofilament formation of hen egg lysozyme closely follows upon the destruction of the helical and tertiary structures.