Disulfide-linked dimers of human adrenaline synthesizing enzyme PNMT are catalytically active

The crystal structure of human phenylethanolamine N-methyltransferase (hPNMT) reveals a disulfide-linked dimer, despite the presence of reducing agent in the crystallisation conditions. By removing the reducing agent, hPNMT crystals grow more rapidly and at lower protein concentrations. However, it was unclear whether the disulfide bonds are only present in the crystal form or whether these affect enzyme activity. The solution oligomeric state of hPNMT was investigated using biochemical techniques and activity assays. We found that in the absence of reducing agent, hPNMT forms dimers in solution. Furthermore, the solution dimer of hPNMT incorporates disulfide bonds, since this form is sensitive to reducing agent. The C48A and C139A mutants of hPNMT, which are incapable of forming the disulfide bond observed in the crystal structure, have a decreased propensity to form dimer in solution. Those dimers that do form are also sensitive to reducing agent. Further, the C48A/C139A double mutant shows only monomeric behaviour. Both dimeric and monomeric hPNMT, as well as mutants have wildtype enzyme activity. These results show that a variety of disulfides, including those observed in the crystal structure, can form in solution. In addition, disulfide-linked dimers are as active as the monomeric enzyme indicating that the crystal structure of the protein is a valid target for inhibitor design.     

The crystal structure of TrxA(CACA): Insights into the formation of a [2Fe-2S] iron-sulfur cluster in an Escherichia coli thioredoxin mutant

Escherichia coli thioredoxin is a small monomeric protein that reduces disulfide bonds in cytoplasmic proteins. Two cysteine residues present in a conserved CGPC motif are essential for this activity. Recently, we identified mutations of this motif that changed thioredoxin into a homodimer bridged by a [2Fe-2S] iron-sulfur cluster. When exported to the periplasm, these thioredoxin mutants could restore disulfide bond formation in strains lacking the entire periplasmic oxidative pathway. Essential for the assembly of the iron-sulfur was an additional cysteine that replaced the proline at position three of the CGPC motif. We solved the crystalline structure at 2.3 Angstroms for one of these variants, TrxA(CACA). The mutant protein crystallized as a dimer in which the iron-sulfur cluster is replaced by two intermolecular disulfide bonds. The catalytic site, which forms the dimer interface, crystallized in two different conformations. In one of them, the replacement of the CGPC motif by CACA has a dramatic effect on the structure and causes the unraveling of an extended alpha-helix. In both conformations, the second cysteine residue of the CACA motif is surface-exposed, which contrasts with wildtype thioredoxin where the second cysteine of the CXXC motif is buried. This exposure of a pair of vicinal cysteine residues apparently allows thioredoxin to acquire an iron-sulfur cofactor at its active site, and thus a new activity and mechanism of action.     

The crystal structure of the C45S mutant of annelid Arenicola marina peroxiredoxin 6 supports its assignment to the mechanistically typical 2-Cys subfamily without any formation of toroid-shaped decamers

The peroxiredoxins (PRDXs) define a superfamily of thiol-dependent peroxidases able to reduce hydrogen peroxide, alkyl hydroperoxides, and peroxynitrite. Besides their cytoprotective antioxidant function, PRDXs have been implicated in redox signaling and chaperone activity, the latter depending on the formation of decameric high-molecular-weight structures. PRDXs have been mechanistically divided into three major subfamilies, namely typical 2-Cys, atypical 2-Cys, and 1-Cys PRDXs, based on the number and position of cysteines involved in the catalysis. We report the structure of the C45S mutant of annelid worm Arenicola marina PRDX6 in three different crystal forms determined at 1.6, 2.0, and 2.4 A resolution. Although A. marina PRDX6 was cloned during the search of annelid homologs of mammalian 1-Cys PRDX6s, the crystal structures support its assignment to the mechanistically typical 2-Cys PRDX subfamily. The protein is composed of two distinct domains: a C-terminal domain and an N-terminal domain exhibiting a thioredoxin fold. The subunits are associated in dimers compatible with the formation of intersubunit disulfide bonds between the peroxidatic and the resolving cysteine residues in the wild-type enzyme. The packing of two crystal forms is very similar, with pairs of dimers associated as tetramers. The toroid-shaped decamers formed by dimer association and observed in most typical 2-Cys PRDXs is not present. Thus, A. marina PRDX6 presents structural features of typical 2-Cys PRDXs without any formation of toroid-shaped decamers, suggesting that it should function more like a cytoprotective antioxidant enzyme or a modulator of peroxide-dependent cell signaling rather than a molecular chaperone.     

Thioredoxin A active-site mutants form mixed disulfide dimers that resemble enzyme-substrate reaction intermediates

Thioredoxin functions in nearly all organisms as the major thiol-disulfide oxidoreductase within the cytosol. Its prime purpose is to maintain cysteine-containing proteins in the reduced state by converting intramolecular disulfide bonds into dithiols in a disulfide exchange reaction. Thioredoxin has been reported to contribute to a wide variety of physiological functions by interacting with specific sets of substrates in different cell types. To investigate the function of the essential thioredoxin A (TrxA) in the low-GC Gram-positive bacterium Bacillus subtilis, we purified wild-type TrxA and three mutant TrxA proteins that lack either one or both of the two cysteine residues in the CxxC active site. The pure proteins were used for substrate-binding studies known as “mixed disulfide fishing” in which covalent disulfide-bonded reaction intermediates can be visualized. An unprecedented finding is that both active-site cysteine residues can form mixed disulfides with substrate proteins when the other active-site cysteine is absent, but only the N-terminal active-site cysteine forms stable interactions. A second novelty is that both single-cysteine mutant TrxA proteins form stable homodimers due to thiol oxidation of the remaining active-site cysteine residue. To investigate whether these dimers resemble mixed enzyme-substrate disulfides, the structure of the most abundant dimer, C32S, was characterized by X-ray crystallography. This yielded a high-resolution (1.5Å) X-ray crystallographic structure of a thioredoxin homodimer from a low-GC Gram-positive bacterium. The C32S TrxA dimer can be regarded as a mixed disulfide reaction intermediate of thioredoxin, which reveals the diversity of thioredoxin/substrate-binding modes.     

Evidence for a domain-swapped CD4 dimer as the coreceptor for binding to class II MHC

CD4 is a coreceptor for binding of T cells to APC and the primary receptor for HIV. The disulfide bond in the second extracellular domain (D2) of CD4 is reduced on the cell surface, which leads to formation of disulfide-linked homodimers. A large conformational change must take place in D2 to allow for formation of the disulfide-linked dimer. Domain swapping of D2 is the most likely candidate for the conformational change leading to formation of two disulfide-bonds between Cys130 in one monomer and Cys159 in the other one. Mild reduction of the extracellular part of CD4 resulted in formation of disulfide-linked dimers, which supports the domain-swapped model. The functional significance of dimer formation for coreceptor function was tested using cells expressing wild-type or disulfide-bond mutant CD4. Eliminating the D2 disulfide bond markedly impaired CD4's coreceptor function. Modeling of the complex of the TCR and domain-swapped CD4 dimer bound to class II MHC and Ag supports the domain-swapped dimer as the immune coreceptor. The known involvement of D4 residues Lys318 and Gln344 in dimer formation is also accommodated by this model. These findings imply that disulfide-linked dimeric CD4 is the preferred coreceptor for binding to APC.     

Variable oligomerization modes in coronavirus non-structural protein 9

Non-structural protein 9 (Nsp9) of coronaviruses is believed to bind single-stranded RNA in the viral replication complex. The crystal structure of Nsp9 of human coronavirus (HCoV) 229E reveals a novel disulfide-linked homodimer, which is very different from the previously reported Nsp9 dimer of SARS coronavirus. In contrast, the structure of the Cys69Ala mutant of HCoV-229E Nsp9 shows the same dimer organization as the SARS-CoV protein. In the crystal, the wild-type HCoV-229E protein forms a trimer of dimers, whereas the mutant and SARS-CoV Nsp9 are organized in rod-like polymers. Chemical cross-linking suggests similar modes of aggregation in solution. In zone-interference gel electrophoresis assays and surface plasmon resonance experiments, the HCoV-229E wild-type protein is found to bind oligonucleotides with relatively high affinity, whereas binding by the Cys69Ala and Cys69Ser mutants is observed only for the longest oligonucleotides. The corresponding mutations in SARS-CoV Nsp9 do not hamper nucleic acid binding. From the crystal structures, a model for single-stranded RNA binding by Nsp9 is deduced. We propose that both forms of the Nsp9 dimer are biologically relevant; the occurrence of the disulfide-bonded form may be correlated with oxidative stress induced in the host cell by the viral infection.     

Biophysical Characterization of the Dimer and Tetramer Interface Interactions of the Human Cytosolic Malic Enzyme

The cytosolic NADP⁺-dependent malic enzyme (c-NADP-ME) has a dimer-dimer quaternary structure in which the dimer interface associates more tightly than the tetramer interface. In this study, the urea-induced unfolding process of the c-NADP-ME interface mutants was monitored using fluorescence and circular dichroism spectroscopy, analytical ultracentrifugation and enzyme activities. Here, we demonstrate the differential protein stability between dimer and tetramer interface interactions of human c-NADP-ME. Our data clearly demonstrate that the protein stability of c-NADP-ME is affected predominantly by disruptions at the dimer interface rather than at the tetramer interface. First, during thermal stability experiments, the melting temperatures of the wild-type and tetramer interface mutants are 8–10°C higher than those of the dimer interface mutants. Second, during urea denaturation experiments, the thermodynamic parameters of the wild-type and tetramer interface mutants are almost identical. However, for the dimer interface mutants, the first transition of the urea unfolding curves shift towards a lower urea concentration, and the unfolding intermediate exist at a lower urea concentration. Third, for tetrameric WT c-NADP-ME, the enzyme is first dissociated from a tetramer to dimers before the 2 M urea treatment, and the dimers then dissociated into monomers before the 2.5 M urea treatment. With a dimeric tetramer interface mutant (H142A/D568A), the dimer completely dissociated into monomers after a 2.5 M urea treatment, while for a dimeric dimer interface mutant (H51A/D90A), the dimer completely dissociated into monomers after a 1.5 M urea treatment, indicating that the interactions of c-NADP-ME at the dimer interface are truly stronger than at the tetramer interface. Thus, this study provides a reasonable explanation for why malic enzymes need to assemble as a dimer of dimers.     

Homo-oligomerization of the porcine reproductive and respiratory syndrome virus nucleocapsid protein and the role of disulfide linkages

As a step toward understanding the assembly pathway of the porcine reproductive and respiratory syndrome virus (PRRSV), the oligomeric properties of the nucleocapsid (N) protein were investigated. In this study, we have demonstrated that under nonreducing conditions the N protein forms disulfide-linked homodimers. However, inclusion of an alkylating agent (N-ethylmaleimide [NEM]) prevented disulfide bond formation, suggesting that these intermolecular disulfide linkages were formed as a result of spurious oxidation during cell lysis. In contrast, N protein homodimers isolated from extracellular virions were shown to have formed NEM-resistant intermolecular disulfide linkages, the function of which is probably to impart stability to the virion. Pulse-chase analysis revealed that N protein homodimers become specifically disulfide linked within the virus-infected cell, albeit at the later stages of infection, conceivably when the virus particle buds into the oxidizing environment of the endoplasmic reticulum. Moreover, NEM-resistant disulfide linkages were shown to occur only during productive PRRSV infection, since expression of recombinant N protein did not result in the formation of NEM-resistant disulfide-linked homodimers. Mutational analysis indicated that of the three conserved cysteine residues in the N protein, only the cysteine at position 23 was involved in the formation of disulfide linkages. The N protein dimer was shown to be stable both in the presence and absence of intermolecular disulfide linkages, indicating that noncovalent interactions also play a role in dimerization. Non-disulfide-mediated N protein interactions were subsequently demonstrated both in vitro by the glutathione S-transferase (GST) pull-down assay and in vivo by the mammalian two-hybrid assay. Using a series of N protein deletion mutants fused to GST, amino acids 30 to 37 were shown to be essential for N-N interactions. Furthermore, since RNase A treatment markedly decreased N protein-binding affinity, it appears that at least in vitro, RNA may be involved in bridging N-N interactions. In cross-linking experiments, the N protein was shown to assemble into higher-order structures, including dimers, trimers, tetramers, and pentamers. Together, these findings demonstrate that the N protein possesses self-associative properties, and these likely provide the basis for PRRSV nucleocapsid assembly.     

The structure of holo and metal-deficient wild-type human Cu,Zn superoxide dismutase and its relevance to familial amyotrophic lateral sclerosis

Cu, Zn superoxide dismutase (SOD1) forms a crucial component of the cellular defence against oxidative stress. Zn-deficient wild-type and mutant human SOD1 have been implicated in the disease familial amyotrophic lateral sclerosis (FALS). We present here the crystal structures of holo and metal-deficient (apo) wild-type protein at 1.8A resolution. The P21 wild-type holo enzyme structure has nine independently refined dimers and these combine to form a "trimer of dimers" packing motif in each asymmetric unit. There is no significant asymmetry between the monomers in these dimers, in contrast to the subunit structures of the FALS G37R mutant of human SOD1 and in bovine Cu,Zn SOD. Metal-deficient apo SOD1 crystallizes with two dimers in the asymmetric unit and shows changes in the metal-binding sites and disorder in the Zn binding and electrostatic loops of one dimer, which is devoid of metals. The second dimer lacks Cu but has approximately 20% occupancy of the Zn site and remains structurally similar to wild-type SOD1. The apo protein forms a continuous, extended arrangement of beta-barrels stacked up along the short crystallographic b-axis, while perpendicular to this axis, the constituent beta-strands form a zig-zag array of filaments, the overall arrangement of which has a similarity to the common structure associated with amyloid-like fibrils.     

Disulfide bridges are not involved in penicillin-binding protein 1b dimerization in Escherichia coli

PBP1b can be found as a dimer in Escherichia coli. Previous results suggested that dimerization involved the cysteine(s) in an intermolecular disulfide bond. We show that either deletion mutants or a mutant without cysteines is fully active and still binds penicillin and that the latter can also form dimers.     

Effect of the intermolecular disulfide bond on the conformation and stability of glial cell line-derived neurotrophic factor

Glial cell line-derived neurotrophic factor (GDNF) is a member of the TGF-beta superfamily of proteins. It exists as a covalent dimer in solution, with the 15 kDa monomers linked by an interchain disulfide bond through the Cys101 residues. Sedimentation equilibrium and velocity experiments demonstrated that, after removal of the interchain disulfide bond, GDNF remains as a non-covalent dimer and is stable at pH 7.0. To investigate the effect of the intermolecular disulfide on the structure and stability of GDNF, we compared the solution structures of the wild-type protein and a cysteine-101 to alanine (C101A) mutant using Fourier transform infrared (FTIR), FT-Raman and circular dichroism (CD) spectroscopy and sedimentation analysis. The elimination of the intermolecular disulfide bond causes only minor changes (approximately 4%) in the secondary structures of GDNF. The far- and near-UV CD spectra demonstrated that the secondary and tertiary structures were similar for both wild-type and C101A GDNF. Heparin binding and sedimentation velocity experiments also indicated that the folded structure of the wild-type and C101A GDNF are indistinguishable. The thermal stability of GDNF does not appear to be affected by the absence of the interchain disulfide bond and the biological activity of the C101A mutant is identical with that of the wild-type protein. However, small but significant changes in side chain conformations of tyrosine and aliphatic residues were observed by FT-Raman spectroscopy upon removal of the intermolecular disulfide bond, which may reflect structural changes in the area of dimeric contact. By comparing the Raman spectrum of wild-type GDNF with that of the C101A analog, we identified the conformation of the intermolecular disulfide as trans-gauche-trans geometry. These results indicate that GDNF is an active, properly folded molecule in the absence of the interchain disulfide bond.     

IL-8 single-chain homodimers and heterodimers: interactions with chemokine receptors CXCR1, CXCR2, and DARC.

Covalent single-chain dimers of the chemokine interleukin-8 (IL-8) have been designed to mimic the dimeric form of IL-8 in solution and facilitate the production of heterodimer variants of IL-8. Physical studies indicated that use of a simple peptide linker to join two subunits, while allowing receptor binding and activation, led to self-association of the tethered dimers. However, addition of a single disulfide crosslink between the tethered subunits prevented this multimer from forming, yielding a species of dimer molecular weight. Crosslinked single-chain dimers bind to both IL-8 neutrophil receptors CXCR1 and CXCR2 as well as to DARC, as does a double disulfide-linked dimer with no peptide linker. In addition, neutrophil response to these dimers as measured by chemotaxis or beta-glucuronidase release is similar to that elicited by wild-type IL-8, providing evidence that the dissociation of the dimeric species is not required for these biologically relevant activities. Finally, through construction of single-chain heterodimer mutants, we show that only the first subunit's ELR motif is the single-chain variants.     

Design of the helix-turn-helix motif: nonlocal effects of quaternary structure in DNA recognition investigated by laser Raman spectroscopy

The operator-binding domain of phage lambda repressor provides a model for DNA recognition by the helix-turn-helix (HTH) motif. In the wild-type protein, dimerization is mediated by hydrophobic packing (of the dyad-related helix 5), which serves as an indirect determinant of operator affinity. The mutant repressor, Tyr88----Cys, forms an intersubunit disulfide linkage and exhibits enhancement of both structural stability and operator affinity. Yet the dimer-specific operator affinity of the mutant is 10-fold weaker than that of the wild-type (noncovalent) dimer, suggesting nonlocal effects of the intersubunit disulfide bond on HTH recognition (Sauer et al., 1986). To explore such nonlocal effects, we describe laser Raman studies of the Cys88 mutant repressor and its interaction with operator sites OL1 and OR3. The following results have been obtained: (i) Wild-type and mutant dimers exhibit similar secondary structures, indicated by quantitative comparison of Raman amide I and amide III bands. (ii) The engineered disulfide of the mutant lacks rigorous symmetry; we observe mainly the gauche/gauche/trans CC-S-S-CC rotamer. (iii) Remarkably, distinctive local and nonlocal differences are observed in the mechanisms of DNA recognition by wild-type and mutant repressors. These differences involve specific hydrogen-bonding interactions between the protein and DNA, including guanine N7 sites in the major groove of DNA, and alterations in DNA phosphodiester conformation induced by protein binding. We analyze these differences in relation to crystal structures of the wild-type dimer with and without bound DNA.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of single point mutations in a form of systemic amyloidosis

Amyloid deposits of light-chain proteins are associated with the most common form of systemic amyloidosis. We have studied the effects of single point mutations on amyloid formation of these proteins using explicit solvent model molecular dynamics simulations. For this purpose, we compare the stability of the wild-type immunoglobulin light-chain protein REI in its native and amyloid forms with that of four mutants: R61N, G68D, D82I, and A84T. We argue that the experimentally observed differences in the propensity for amyloid formation result from two effects. First, the mutant dimers have a lower stability than the wild-type dimer due to increase exposure of certain hydrophobic residues. The second effect is a shift in equilibrium between monomers with amyloid-like structure and such with native structures. Hence, when developing drugs against light-chain associated systemic amyloidosis, one should look for components that either stabilize the dimer by binding to the dimer interface or reduce for the monomers the probability of the amyloid form.     

H2O2-induced intermolecular disulfide bond formation between receptor protein-tyrosine phosphatases

Receptor protein-tyrosine phosphatase alpha (RPTPalpha) belongs to the subfamily of receptor-like protein-tyrosine phosphatases that are characterized by two catalytic domains of which only the membrane-proximal one (D1) exhibits appreciable catalytic activity. The C-terminal catalytic domain (D2) regulates RPTPalpha catalytic activity by controlling rotational coupling within RPTPalpha dimers. RPTPalpha-D2 changes conformation and thereby rotational coupling within RPTPalpha dimers in response to changes in the cellular redox state. Here we report a decrease in motility of RPTPalpha from cells treated with H2O2 on non-reducing SDS-polyacrylamide gels to a position that corresponds to RPTPalpha dimers, indicating intermolecular disulfide bond formation. Using mutants of all individual cysteines in RPTPalpha and constructs encoding the individual protein-tyrosine phosphatase domains, we located the intermolecular disulfide bond to the catalytic Cys-723 in D2. Disulfide bond formation and dimer stabilization showed similar levels of concentration and time dependence. However, treatment of lysates with dithiothreitol abolished intermolecular disulfide bonds but not stable dimer formation. Intermolecular disulfide bond formation and rotational coupling were also found using a chimera of the extracellular domain of RPTPalpha fused to the transmembrane and intracellular domain of the leukocyte common antigen-related protein (LAR). These results suggest that H2O2 treatment leads to oxidation of the catalytic Cys in D2, which then rapidly forms a disulfide bond with the D2 catalytic Cys of the dyad-related monomer, rendering an inactive RPTP dimer. Recovery from oxidative stress first leads to the reduction of the disulfide bond followed by a slower refolding of the protein to the active conformation.     

The GB1 amyloid fibril: recruitment of the peripheral beta-strands of the domain swapped dimer into the polymeric interface

Three-dimensional domain swapping has been evoked as a mechanism for oligomerization of proteins. Here, we show for the immunoglobulin-binding domain B1 of streptococcal protein G (GB1) that fibril formation is observed readily for variants that exist as domain-swapped dimers. No fibril was formed by a revertant that exhibits the stable wild-type GB1 fold or a mutant comprising a highly destabilized, fluctuating ensemble of conformers. Structural features of the GB1 amyloid fibril were characterized by cysteine disulfide cross-linking. Residues in the outer edge beta-strands of the domain-swapped dimer readily form intermolecular disulfide bonds prior to and during fibril formation. On the basis of these data, a structural model for the assembly of domain-swapped dimers into a polymeric structure of the GB1 fibril is proposed.     

A switch in the mechanism of communication between the two DNA-binding sites in the SfiI restriction endonuclease

While many Type II restriction enzymes are dimers with a single DNA-binding cleft between the subunits, SfiI is a tetramer of identical subunits. Two of its subunits (a dimeric unit) create one DNA-binding cleft, and the other two create a second cleft on the opposite side of the protein. The two clefts bind specific DNA cooperatively to give a complex of SfiI with two recognition sites. This complex is responsible for essentially all of the DNA-cleavage reactions by SfiI: virtually none is due to the complex with one site. The communication between the DNA-binding clefts was examined by disrupting one of the very few polar interactions in the otherwise hydrophobic interface between the dimeric units: a tyrosine hydroxyl was removed by mutation to phenylalanine. The mutant protein remained tetrameric in solution and could bind two DNA sites. But instead of being activated by binding two sites, like wild-type SfiI, it showed maximal activity when bound to a single site and had a lower activity when bound to two sites. This interaction across the dimer interface thus enforces in wild-type SfiI a cooperative transition between inactive and active states in both dimers, but without this interaction as in the mutant protein, a single dimer can undergo the transition to give a stable intermediate with one inactive dimer and one active dimer.     

Disulfide-mediated oligomerization of Peripherin/Rds and Rom-1 in photoreceptor disk membranes. Implications for photoreceptor outer segment morphogenesis and degeneration

Peripherin/Rds is a tetraspanning membrane protein that has been implicated in photoreceptor outer segment morphogenesis and inherited retinal degenerative diseases. Together with the structurally related protein, Rom-1, it forms a complex along the rims of rod and cone disc membranes. We have compared the oligomeric structure of these proteins from nonreduced and dithiothreitol reduced membranes by velocity sedimentation, SDS-gel electrophoresis, immunoaffinity chromatography, and chemical cross-linking. Under reducing conditions peripherin/Rds and Rom-1 existed as homomeric and heteromeric core complexes devoid of intermolecular disulfide bonds. Under nonreducing conditions core complexes associated through intermolecular disulfide bonds to form oligomers. One intermediate-size oligomer contained monomers and disulfide-linked dimers of peripherin/Rds and Rom-1, while larger oligomers consisted only of disulfide-linked peripherin/Rds dimers when analyzed on nonreducing SDS gels. Consistent with this result, disc membranes contained twice as much peripherin/Rds as Rom-1. Peripherin/Rds individually expressed in COS-1 cells also formed disulfide-linked oligomers bridged through Cys-150 residues, whereas Rom-1 showed little tendency to form oligomers. These results indicate that peripherin/Rds and Rom-1 associate noncovalently to form multisubunit core complexes. Peripherin/Rds containing core complexes interact through specific intermolecular disulfide bonds to form oligomers which may play a crucial role in photoreceptor disc morphogenesis and retinal degenerative diseases.     

Efficient leukocyte Ig-like receptor signaling and crystal structure of disulfide-linked HLA-G dimer

HLA-G is a nonclassical major histocompatibility complex class I (MHCI) molecule, which is expressed in trophoblasts and confers immunological tolerance in the maternal-fetal interface by binding to leukocyte Ig-like receptors (LILRs, also called as LIR/ILT/CD85) and CD8. HLA-G is expressed in disulfide-linked dimer form both in solution and at the cell surface. Interestingly, MHCI dimer formations have been involved in pathogenesis and T cell activation. The structure and receptor binding characteristics of MHCI dimers have never been evaluated. Here we performed binding studies showing that the HLA-G dimer exhibited higher overall affinity to LILRB1/2 than the monomer by significant avidity effects. Furthermore, the cell reporter assay demonstrated that the dimer formation remarkably enhanced the LILRB1-mediated signaling at the cellular level. We further determined the crystal structure of the wild-type dimer of HLA-G with the intermolecular Cys(42)-Cys(42) disulfide bond. This dimer structure showed the oblique configuration to expose two LILR/CD8-binding sites upward from the membrane easily accessible for receptors, providing plausible 1:2 (HLA-G dimer:receptors) complex models. These results indicated that the HLA-G dimer conferred increased avidity in a proper structural orientation to induce efficient LILR signaling, resulting in the dominant immunosuppressive effects. Moreover, structural and functional implications for other MHCI dimers observed in activated T cells and the pathogenic allele, HLA-B27, are discussed.