Affinity capillary electrophoresis: important application areas and some recent developments

Affinity capillary electrophoresis (ACE) is a broad term referring to the separation by capillary electrophoresis of substances that participate in specific or non-specific affinity interactions during electrophoresis. The interacting molecules can be found free in solution or can be immobilized to a solid support. Every ACE mode has advantages and disadvantages. Each can be used for a wide variety of applications. This paper focuses on applications that include purification and concentration of analytes present in diluted solutions or complex matrices, quantitation of analytes based on calibration curves, and estimation of binding constants from direct and derived binding curves based on quantitation of analytes or on analyte migration shifts. A more recent chemicoaffinity strategy in capillary electrophoresis/capillary electrochromatography (CE/CEC) termed molecular imprinting (`plastic antibodies') is discussed as well. Although most ACE studies are aimed at characterizing small-molecular mass analytes such as drugs, hormones, and peptides, some efforts have been pursued to characterize larger biopolymers including proteins, such as immunoglobulins. Examples of affinity interactions that have been studied are antigen–antibody, hapten–antibody, lectin–sugar, drug–protein, and enzyme–substrate complexes using ultraviolet, laser-induced fluorescence, and mass spectrometer detectors. This paper also addresses the critical issue of background electrolyte selection and quantitation of analytes. Specific examples of bioaffinity applications are presented, and the future of ACE in the biomedical field is discussed.     

Capillary electrophoresis as a clinical tool

Clinical laboratories must produce accurate results for patients with a minimum turn-around time. Automated commercial capillary electrophoresis instrumentation has been available to the clinical laboratory for the past five years. Our laboratory has utilised capillary electrophoresis (CE) to automate serum protein electrophoresis. We have used the technique of CE to produce clinical results for nearly two years. CE methods are also available for the quantitation of haemoglobin variants, by both isoelectric focusing and free solution techniques. Micellar electrokinetic separations by CE have been developed for some specialised drug assays and for B-group vitamin analysis, while gel-filled capillaries have the capability to separate DNA fragments, such as PCR products. Isoenzyme analysis has shown possibilities by CE, but quantitative results are needed to be clinically useful. Analysis of amino acids for newborn screening programs and as an arterial clotting indicator are being developed. The next five years should see a proliferation of clinical laboratory methods using automated CE.     

Capillary electrophoresis procedures for serum protein analysis: comparison with established techniques

Methods using automated capillary electrophoresis (CE) instrumentation are available for serum protein electrophoresis with monoclonal band quantitation, isoelectric focusing and sodium dodecyl sulphate-polyacrylamide gel electrophoresis separations. The advantages of CE over previous gel methods relate to the time and labour saved by the automated instrumentation. High pI monoclonal bands and cryoglobulin specimens can be successfully analysed by CE. However, if the CE application uses a standard company supplied kit, then the cost savings are often negated by the high cost of the kit. Improvements such as the inclusion of both a UV-Vis as well as a fluorescence detector as standard within the one commercial instrument, the production of coated IEF capillaries with a useful life of at least 100 samples, and the introduction of a capillary array into all commercial instrumentation would ensure greater use of CE within both the clinical and other protein laboratories.     

Enantiomer separation by capillary electrophoresis utilizing noncyclic mono-, oligo- and polysaccharides as chiral selectors

Various noncyclic mono-, oligo- and polysaccharides have been successfully used for enantiomer separation in the analytical sciences such as HPLC and capillary electrophoresis (CE). This review presents enantiomer separation by CE utilizing mainly polysaccharides as chiral additives. The operation conditions that affect the enantioselectivity are briefly discussed.     

Novel adsorptive polyamine coating for enhanced capillary electrophoresis of basic proteins and peptides

In capillary electrophoresis (CE), the anionic and hydrophobic nature of the fused-silica capillary surface has long been known to present a problem in protein and peptide analysis. The use of capillary surface coating is one of the approaches to avoid the analyte-wall interactions. In this study, a new polymer, poly-LA 313, has been synthesized, physico-chemical characterized, and applied as polyamine coating for CE separations. The coating process is highly reproducible and provides fast separations of peptides and proteins in a few minutes and with high efficiency. The physically adsorbed polymer gives rise to a durable coating in the range of pH 2-10, in the presence of organic modifiers (acetonitrile and methanol) and with complex biological samples. The efficiency of the new cationic polymer was also tested performing protein and peptide separations with capillary electrophoresis-electrospray ionization-mass spectrometry (CE-ESI-MS).     

Recent progress in capillary electrophoretic analysis of amino acid enantiomers

This review highlights recent progresses in capillary electrophoresis (CE) analysis of amino acid enantiomers in the last decade. Various chiral selectors including cyclodextrins (CDs), bile salts, crown ethers, cinchona alkaloids, metal-chiral amino acid complexes, macrocyclic antibiotics and proteins have been employed to separate amino acid enantiomers. In the CE analysis of amino acids, the selection of the separation mode is one of the most important issues to obtain good resolution of target enantiomers. Among several separation modes, CD-modified capillary zone electrophoresis (CD-CZE), CD electrokinetic chromatography (CDEKC), micellar EKC (MEKC), CD-modified micellar electrokinetic chromatography (CD-MEKC), capillary electrochromatography (CEC), ligand-exchange CE (LE-CE), and nonaqueous CE (NACE) have been employed to the chiral analysis of amino acids. More than 160 published research articles collected from SciFinder Scholar databases from the year 2001 described the enantioseparations of amino acids by capillary-based electrophoresis. This review provides a comprehensive table listing the CE analysis of amino acid enantiomers with categorizing by the separation modes.     

Separation of drug enantiomers by liquid chromatography and capillary electrophoresis, using immobilized proteins as chiral selectors

Proteins display interesting chiral discrimination properties owing to multiple possibilities of intermolecular interactions with chiral compounds. This review deals with proteins which have been used as immobilized chiral selectors for the enantioseparation of drugs in liquid chromatography and capillary electrophoresis. The main procedures allowing the immobilization of proteins onto matrices, such as silica and zirconia particles, membranes and capillaries are first presented. Then the factors affecting the enantioseparation of drugs in liquid chromatography, using various protein-based chiral stationary phases (CSPs), are reviewed and discussed. Last, chiral separations already achieved using immobilized protein selectors in affinity capillary electrochromatography (ACEC) are presented and compared in terms of efficiency, stability and reproducibility.     

Miniaturized electrophoresis: an evolving role in laboratory medicine.

The promise of capillary electrophoresis (CE) for supplanting conventional methods in the clinical laboratory led to intense interest in this analytical tool a decade ago. Since then, a number of clinical applications have been defined along with those that have impacted the pharmaceutical, environmental, and forensic arenas. Concurrent with the development of CE applications was the emergence of electrophoresis in the microchip format. The main attraction of this platform, the ability to execute high-resolution separations in a few hundred seconds, was not its only attribute. The capability for parallel processing of separations was complemented by the potentialfor integrating sample preparation into the same device. This Review highlights recent progress towards CE and microchip electrophoresis as clinical diagnostic tools, with literature coverage from 1996 to 2000.     

Comparison of different techniques for the analysis of metallothionein isoforms by capillary electrophoresis

We have investigated free-solution capillary electrophoresis (FSCE) and micellar electrokinetic capillary chromatography (MECC) separations of metallothionein (MT) isoforms conducted in uncoated and surface-modified fused-silica capillaries. At alkaline pH, FSCE rapidly resolves isoforms belonging to the MT-1 and MT-2 charge classes. At acidic pH, additional resolution of MT isoforms is achieved. The use of high-ionic-strength (0.5 M) phosphate buffers can result in high peak efficiencies and increased resolution for some MT isoforms. Interior capillary surface coatings such as polyamine and linear polyacrylamide polymers permit separation of MT isoforms with enhanced resolution through their effects on electroosmotic flow (EOF) and protein-wall interactions. Improvements in MT isoform resolution can also be achieved by MECC using 100 mM borate buffer pH 8.4 containing 75 mM SDS. Deproteinization of tissue cytosol samples with acetonitrile (60–80%) or perchloric acid (7%) produces extracts that can be subjected to direct analysis of MT by FSCE or MECC. We conclude that optimal separation of MT isoforms by capillary electrophoresis (CE) can be achieved with the appropriate combination of different capillaries, buffers and sample preparation techniques.     

Replaceable cross-linked polyacrylamide for high performance separation of proteins

An alternative sieving matrix, replaceable cross-linked polyacrylamide (rCPA), was developed for sodium dodecyl sulfate capillary gel electrophoresis (SDS-CGE) separation of proteins. This rCPA could be conveniently pressurized into separation capillaries under a pressure of 80 psi. SDS-CGE separations using this matrix generated high resolutions for a wide range (approximately 4 kD to approximately 300 kD) of proteins. When compared to the most frequently used sieving matrixes, the rCPA permitted the highest resolutions with comparable or increased separation speed for protein separations.     

Electrokinetic studies of inorganic coated capillaries

The procedures for the preparation of silica capillaries coated with titanium oxide or aluminum oxide are developed. These inorganic coated capillaries are studied for their applicability in capillary electrophoresis. The points of zero charge are measured as pH 5 and pH 7 for titanium oxide- and aluminum oxide-coated capillaries, respectively. Both titanium oxide and aluminum oxide coatings give better protein separations in comparison to the use of fused-silica capillaries. Separation efficiency of lysozyme as model protein is measured in the range of 20 000 theoretical plates/m of inorganic coated capillaries. However, the hydrophobic interaction between proteins and modified capillary wall possibly contributes to the tailing of observed protein peaks.     

Electrophoresis today and tomorrow: Helping biologists' dreams come true

Intensive research and development of electrophoresis methodology and instrumentation during past decades has resulted in unique methods widely implemented in bioanalysis. While two‐dimensional electrophoresis and denaturing polyacrylamide gel electrophoresis in sodium dodecylsulfate are still the most frequently used electrophoretic methods applied to analyses of proteins, new miniaturized capillary and microfluidic versions of electromigrational methods have been developed. High‐throughput electrophoretic instruments with hundreds of capillaries for parallel separations and laser‐induced fluorescence detection of labeled DNA strands have been of key importance for the scientific and commercial success of the Human Genome Project. Another powerful method, capillary isoelectric focusing with pressurized and pH‐driven mobilization, provides efficient separations and on‐line sensitive detection of proteins, bacteria and viruses. Electrophoretic microfluidic devices can integrate single‐cell injection, cell lysis, separation of its components and fluorescence or mass spectrometry detection. These miniaturized devices also proved the capability of single‐molecule detection.     

Laser-induced fluorescence technique for DNA and proteins separated by capillary electrophoresis

Recent developments in capillary electrophoresis (CE) in conjunction with laser-induced fluorescence (LIF) using long-wavelength (maximum excitation wavelength>500 nm) dyes are reviewed. These dyes are particularly of interest when conducting the analyses of biopolymers by CE-LIF using He-Ne lasers. These systems are benefited from low background, low costs, easy maintenance, and compactness. Derivatizations of DNA and proteins with fluorescent or nonfluorescent chemicals can be carried out prior to, during, or after separations. With the advantages of sensitivity, rapidity, and high efficiency, the applications of CE-LIF to the analysis of polymerase chain reaction products, DNA sequencing, trace analysis of proteins, and single cell analysis have been presented.     

Simultaneous enantioselective separation of azelastine and three of its metabolites for the investigation of the enantiomeric metabolism in rats. I. Liquid chromatography-ionspray tandem mass spectrometry and electrokinetic capillary chromatography

Enantioselective separation methods and the enantioselective determination of the anti-allergic drug azelastine and of three of its main phase I metabolites in a biological matrix underwent chromatographic and electrophoretic investigations. An enantioselective assay of a coupling of HPLC using a beta-cyclodextrin chiral stationary phase to ionspray tandem mass spectrometry is presented. Additionally, this assay is compared to another enantioselective assay using electrokinetic capillary chromatography with beta-cyclodextrin and carboxymethyl-beta-cyclodextrin in polyacrylamide-coated capillaries. For capillary electrophoresis (CE) the importance of polyacrylamide coating for the validation of this separation method is highlighted. Extracted rat plasma samples of enantioselective metabolism studies were measured by both validated assays. Differences in the pharmacokinetics and pharmacodynamics were evaluated for the main substance azelastine and its main metabolite demethylazelastine. So, a first hint about the enantioselectivity of biotransformation of azelastine in rats was seen after oral application of either enantiomer or the racemate to rats.     

Enantioselective separations using capillary electrophoresis

The preconditions are outlined for enantioselective separations in capillary electrophoresis (CE) with chiral selectors as additives to the background electrolyte. Free solution capillary electrophoresis conditions are characterised by a single solution phase. Chiral separations are reviewed by selector type (chiral ligand exchange, cyclodextrins, crown ethers, glycoproteins) with the extensive studies on cyclodextrins grouped into sections on amino acids, pharmaceuticals, and speciality chemicals, optimisation, biological fluids, and quantitative aspects. In micellar electrokinetic capillary chromatography, enantioselective discrimination occurs by partition in a two-phase system, with a chiral micellar phase as selector. Optimum separation conditions can be readily predicted for a given selector–selectand combination, and absolute values of binding constants determined by CE. Advantages of CE in comparison with HPLC using a chiral stationary phase include robust, rapid assays and the use of small volumes of aqueous solutions; disadvantages include less favourable detection limits. © 1994 Wiley-Liss, Inc.     

High throughput and rapid screening of marine protein hydrolysates enriched in peptides with angiotensin-I-converting enzyme inhibitory activity by capillary electrophoresis

Twelve kinds of marine protein materials, including fish, shrimp, seashell, algae and seafood wastes were selected for the hydrolysis using four different proteases. The IC(50) values for angiotensin-converting enzyme (ACE) inhibitory activity of 48 hydrolysates were rapidly determined by capillary electrophoresis (CE). The values ranged from 0.17 to 501.7mg/ml, and were affected by both the marine protein resources and the selected proteases. Hydrolysates of the lowest IC(50) values were from shrimp (Acetes chinensis), shark meat, mackerel bone, Polysiphonia urceolata and Spirulina platensis, indicating these five kinds of marine food proteins contained beneficial materials for the production of ACE inhibitory peptides by proteolysis. The hydrolysates obtained using proteases Protamex and SM98011 had lower IC(50) values, showing these two proteases were superior to others. The CE method achieved the same sensitivity as the high performance liquid chromatography (HPLC) method. However, the CE method was faster and, as a result, more economical. Therefore, CE had potential for rapid screening of marine protein hydrolysates enriched in ACE inhibitory peptides.     

Interactions of charged ligands with beta(2)-microglobulin conformers in affinity capillary electrophoresis

Alternative conformations of beta(2)-microglobulin (beta(2)m) are involved in its transformation from soluble monomeric precursor molecules to the insoluble polymeric material that constitutes beta(2)m amyloid. Accordingly, non-native conditions such as low pH or high ionic strength promote beta(2)m amyloid formation in vitro. The early events in these processes are not well known, partly because of the paucity of techniques available for the characterization of transient folding intermediates in proteins. We have used high-resolution separations in capillaries (capillary electrophoresis, CE) to resolve putative conformer fractions in native and structurally modified beta(2)m and to show the induction of alternatively folded beta(2)m under different experimental conditions. The conformer fractions are observed as distinct peaks in the separation profiles and thus it is possible to probe for the reactivity of these individual beta(2)m species with specific ligands that, upon binding, alter analyte mobility in affinity capillary electrophoresis experiments. Interactions were shown in this way for the negatively charged substances heparin, Congo red, and suramin, as well as for Cu(2+) ions. Marked differences in the binding behavior of the beta(2)m conformational variants compared with native beta(2)m could be demonstrated. This approach for conformer separation and binding characterization is a valuable starting point for the assessment of various ligand molecules, or analogues thereof, as agents capable of perturbing the mechanisms of fibril formation.     

Miniaturized separation techniques in glycomic investigations

High-sensitivity glycomic analyses are becoming of a great interest in modern biomedical and clinical research, as well as in the development of recombinant protein products. The evolution of separation techniques for glycomic analysis at high sensitivity is highlighted in this review. These methodologies include capillary liquid chromatography, capillary electrophoresis (CE) and capillary electrochromatography (CEC). The potential of such methodologies in glycomic analysis is demonstrated for model glycoproteins as well as total glycomes derived from biological samples.     

Separation methods for pharmacologically active xanthones

Xanthones, as a kind of polyphenolic natural products with many strong bioactivities, are attractive for separation scientists due to the similarity and diversity of their structures resulting in difficult separation by chromatographic methods. High performance liquid chromatography (HPLC) and thin layer chromatography (TLC) are traditional methods to separate xanthones. Recently, capillary electrophoresis (CE), as a micro-column technique driven by electroosmotic flow (EOF), with its high efficiency and high-speed separation, has been employed to separate xanthones and determine their physicochemical properties such as binding constants with cyclodextrin (CD) and ionization constants. Since xanthones have been used in clinic treatment, the development of chromatographic and CE methods for the separation and determination of xanthones plays an essential role in the quality control of some herbal medicines containing xanthones. This article reviewed the separation of xanthones by HPLC, TLC and CE, citing 72 literatures. This review focused on the CE separation for xanthones due to its unique advantages compared to chromatographic methods. The comparison of separation selectivity of different CE modes including capillary zone electrophoresis (CZE), micellar electrokinetic chromatography (MEKC), microemulsion electrokinetic capillary chromatography (MEEKC) and capillary electrochromatography (CEC) was discussed. Compared with traditional chromatographic methods such as HPLC and TLC, CE has higher separation efficiency, faster separation, lower cost and more flexible modes. However, because of low sensitivity of UV detector and low contents of xanthones in herbal medicines, CE methods have seldom been applied to the analysis of real samples although CE showed great potential for xanthone separation. The determination of xanthones in herbal medicines has been often achieved by HPLC. Hence, how to enhance CE detection sensitivity for real sample analysis, e.g. by on-line preconcentration and CE-MS, would be a key to achieve the quantitation of xanthones.     

Analysis of liposomes by capillary electrophoresis and their use as carrier in electrokinetic chromatography

This contribution reviews work about liposomes in the context of electrically driven separation methods in the capillary format. The discussion covers four topics. The one broaches the application of liposomes as pseudo-stationary phases or carriers in vesicle or liposome electrokinetic chromatography (EKC) in the way as microemulsions and micelles are used; it includes the chromatographic use of liposomal bilayers as stationary phases attached to the wall for capillary electrochromatography (CEC). The second topic is the characterization and separation of liposomes as analytes by capillary electrophoresis (CE). Then the determination of distribution coefficients and binding constants between liposomes and ligands is discussed, and finally work dealing with peptides and proteins are reviewed with lipid bilayers as constituents of the electrically driven separation system.