Growth-Associated Production of Poly(3-Hydroxyvalerate) from n-Pentanol by a Methylotrophic Bacterium, Paracoccus denitrificans

Paracoccus denitrificans accumulated a polyester in its cells during growth on n-pentanol. The composition of the polyester varied during the cultivation: the level of the 3-hydroxyvalerate unit in the polyester increased, and eventually a homopolymeric poly(3-hydroxyvalerate) [P(3HV)] accumulated to an amount 22 to 24% of the cell dry weight. Growth-associated polyester synthesis was considerably affected by n-pentanol when its concentration was controlled at several levels. Maximum accumulation of the polyester was obtained at 0.02% (vol/vol). Physical and mechanical characteristics of the P(3HV) were determined and compared with those of other homo- and copolyesters. The P(3HV) was dextrorotatory and had number-averaged and weight-averaged molecular masses of 128,000 and 888,000 Da, respectively, with a rate of polydispersity of 6.93. The level of tensile strength of the P(3HV) was lower, and its extension to break was higher than that of the poly(3-hydroxybutyrate) homopolyester.     

n-Amyl alcohol as a substrate for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacteria

Abstract n -Amyl alcohol was examined as a source for the synthesis of the 3-hydroxyvalerate (3HV) unit of the biopolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)), by Alcaligenes sp., Pseudomonas sp. and several methylotrophic bacteria. A. eutrophus and Ps. lemoignei synthesized P(3HB-co-3HV) from glucose and n -amyl alcohol under nitrogen-deficient conditions. Many of methylotrophic bacteria grown on methanol synthesized the copolyester from methanol and n -amyl alcohol under nitrogen-deficient conditions. The content and composition of the polyester varied from strain to strain. Paracoccus denitrificans differed from all others in having a higher content of 3-hydroxyvalerate units in the copolyester synthesized.     

Synthesis of biodegradable polyesters by Gram negative bacterium isolated from Malaysian environment

A locally isolated Gram negative bacterium, Cupriavidus sp. USMAA9-39 was able to produce various types of biodegradable polyesters through a two-step cultivation process. These are copolymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)], copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] and terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)]. These polymers were synthesized by this bacterium when grown with a combination of some carbon sources. The biosynthesis of P(3HB-co-4HB) was achieved by using carbon sources such as γ-butyrolactone or 1,4-butanediol or by a combination of oleic acid with either γ-butyrolactone or 1,4-butanediol. Meanwhile, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was produced using 1-pentanol or valeric acid or by a combination of oleic acid with either 1-pentanol or valeric acid. When γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol were used as mixed carbon sources, P(3HB-co-3HV-co-4HB) terpolymer were produced. The presence of 3HB, 3HV or/and 4HB monomers were confirmed by gas chromatography and nuclear magnetic resonance (NMR) spectroscopy.     

Biosynthesis of poly(3-hydroxybutyrate-Co-3-hydroxyvalerate) by a mutant of Sphaerotilus natans

The copolyester of 3-hydroxybutyrate and 3- hydroxyvalerate was synthesized from the combined carbon sources of glucose and sodium propionate by a filamentaion-defective mutant of Sphaerotilus natans, which is a typical filamentous bacterium often found in activated sludge. The 3-hydroxyvalerate content in the produced polymer increased with increasing concentrations of propionate. Cell growth and polyester synthesis were observed even when 0.6% sodium propionate was added to the medium, when the 3-hydroxyvalerate content in the polymer produced was about 60 mol%. The monomer composition of the copolymer was also varied by aeration conditions, time of propionate feeding, and cultivation time. This strain flocculated in accordance with cell growth, allowing rapid and convenient separation of the biomass from the culture fluid.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

Rhizomorph Formation in Fungi

The effect on growth and rhizomorph formation of 12 alcohols (methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, iso-butyl alcohol, tert-butyl alcohol, 1-pentanol, iso-amyl alcohol, ethylene glycol and glycerol) at different concentrations has been examined for 2 isolates of Armillaria mellea (Vahl ex Fr.) Quél. and 1 of Clitocybe geotropa (Bull. ex Fr.) Quél. The fungi were cultivated for 28 days on a synthetic, liquid glucose medium with the alcohols as supplement. The following alcohols strongly stimulated growth and rhizomorph formation: ethanol, 1-propanol and 1-butanol. A great variation was demonstrated between the isolates in relation to rhizomorph production, morphology, and ability to be stimulated by different alcohols.     

Accumulation of PHA and its copolyesters by Methylobacterium sp. KCTC 0048

Summary Methylobacterium sp. KCTC 0048 isolated from soil, could synthesize a variety of copolyesters when secondary carbon substrates were added to nitrogen-limited cultures containing methanol as a major carbon and energy source. The copolyester of 3-hydroxy-butyrate and 3-hydroxyvalerate, P(3HB-co-3HV) accumulated when valeric acid, pentanol or heptanoic acid was added to the nitrogen-limited medium containing methanol. The copolyester of 3-hydroxybutyrate and 4-hydroxybutyrate, P(3HB-co-4HB) was synthesized from 4-hydroxybutyrate, 1,4-butanediol, or -butyrolactone, and the copolyester of 3-hydroxybutyrate and 3-hydroxypropionate (P(3HB-co-3HP)), from 3-hydroxypropionate as the secondary carbon substrates, respectively.     

Multivariable control of alcohol concentrations in the production of polyhydroxyalkanoates (PHAs) by Paracoccus denitrificans

A novel multivariable control strategy is developed for alcohol (ethanol and n-pentanol) concentrations in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(HB-co-HV), a biodegradable polymer by Paracoccus denitrificans ATCC 1774. This controller, which is developed to control the mole fraction of P(HB-co-HV), consists of two parts: one is for ethanol concentration control and the other is for mole fraction control, based on the concept of metabolic flux distribution control. A simple metabolic reaction (MR) model is constructed for flux distribution analysis. The relationship between mole ratio of specific consumption rate of the two alcohols (ethanol and n-pentanol) and the mole fraction of 3HV units in the polymer is linear. This result suggests that the split ratio at a branched point of 3-ketovaleryl-CoA in the P(HB-co-HV) synthetic pathway is constant for several fermentation conditions. When the mole fraction of 3HV units has a target value, the feed rate of n-pentanol becomes a function of the feed rate of ethanol and the set value of 3HV, based on the MR model. The mole fraction of 3HV units successfully reached the target value using this strategy. The mole fraction control strategy is combined with an optimal production strategy based on the optimal profile of the specific growth rate. The combined strategy is realized using multivariable controllers and P(3HB-co-3HV) production is maximized with a given value of mole fraction of 3HV units at the final step of fermentation.     

Purification and properties of a secondary alcohol dehydrogenase from the parasitic protozoan Tritrichomonas foetus

A novel secondary alcohol dehydrogenase has been isolated from Tritrichomonas foetus, the protozoan parasite which is responsible for bovine trichomonal abortion. The enzyme has been obtained in apparently homogeneous form after a 120-fold purification from cell homogenates, thus indicating that this activity constitutes an unusually high 1% of the total cytosolic protein. The native Mr = 115,000, determined by polyacrylamide gel electrophoresis. Mobility on sodium dodecyl sulfate gels suggests that the enzyme is composed of 6-8 subunits, identical as to molecular size (Mr = 17,000). The enzyme catalyzes the reversible oxidation of 2-propanol to acetone, using NADP+ (and not NAD+) as the redox-active co-substrate. Other small secondary alcohols, such as 2-butanol, 2- and 3-pentanol, cyclobutanol, and cyclopentanol are substrates, as are the corresponding ketones of these alcohols. Primary alcohols, such as ethanol and 1-propanol, are oxidized at rates less than 5% of that observed for 2-propanol. Product inhibition studies demonstrate an ordered kinetic mechanism, wherein the co-substrate (NADP+/NADPH) binds to the enzyme prior to binding of the substrate (alcohol/ketone).     

Induction of Suppressed ADH Activity in Drosophila pachea Exposed to Different Alcohols

Laboratory-reared males of the cactophilic Drosophila pachea exhibit a spontaneous and sex-specific suppression of alcohol dehydrogenase (ADH) activity within 4 days after eclosion. A lack of ADH activity also is usually seen in wild-caught males, although relatively high activity is always seen in female flies. In the present study we examined the effectiveness of different alcohols and related compounds, including several found naturally in necroses of the host cactus, to induce suppressed ADH activity in wild males of D. pachea and to serve as enzyme substrates. The primary alcohols (methanol, ethanol, 1-propanol, 1-butanol, and 1-pentanol), and the secondary alcohols (2-propanol and 2-butanol), each induced activity after 24 h exposure, although to different degrees. 1,2-Propanediol was usually effective as an inducer, but 2,3-butanediol usually was ineffective. Little or no induction was seen with 1-octanol, 2-pentanol, 3-methyl-1-butanol, 3-hydroxy-2-butanone, or acetaldehyde. Although the compounds tested varied in their ability to function as ADH substrates, methanol was the only alcohol that showed no activity staining. Ethanol induction of ADH activity was apparent after 3-6 h exposure and induced activity decreased dramatically within 1 week of flies being placed in an alcohol-free environment. Ethanol exposure did not induce ADH in adult female D. pachea, or in adult males and females of D. acutilabella in which control males show reduced ADH activity compared to females. The implications of the loss of ADH activity in adult males of D. pachea, as they relate to feeding ecology and fitness, are discussed.     

Genetically modified strains of Ralstonia eutropha H16 with β-ketothiolase gene deletions for production of copolyesters with defined 3-hydroxyvaleric acid contents

β-Ketothiolases catalyze the first step of poly(3-hydroxybutyrate) [poly(3HB)] biosynthesis in bacteria by condensation of two acetyl coenzyme A (acetyl-CoA) molecules to acetoacetyl-CoA and also take part in the degradation of fatty acids. During growth on propionate or valerate, Ralstonia eutropha H16 produces the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [poly(3HB-co-3HV)]. In R. eutropha, 15 β-ketothiolase homologues exist. The synthesis of 3-hydroxybutyryl-CoA (3HB-CoA) could be significantly reduced in an 8-fold mutant (Lindenkamp et al., Appl. Environ. Microbiol. 76:5373-5382, 2010). In this study, a 9-fold mutant deficient in nine β-ketothiolase gene homologues (phaA, bktB, H16_A1713, H16_B1771, H16_A1528, H16_B0381, H16_B1369, H16_A0170, and pcaF) was generated. In order to examine the polyhydroxyalkanoate production capacity when short- or long-chain and even- or odd-chain-length fatty acids were provided as carbon sources, the growth and storage behavior of several mutants from the previous study and the newly generated 9-fold mutant were analyzed. Propionate, valerate, octanoate, undecanoic acid, or oleate was chosen as the sole carbon source. On octanoate, no significant differences in growth or storage behavior were observed between wild-type R. eutropha and the mutants. In contrast, during the growth on oleate of a multiple mutant lacking phaA, bktB, and H16_A0170, diminished poly(3HB) accumulation occurred. Surprisingly, the amount of accumulated poly(3HB) in the multiple mutants grown on gluconate differed; it was much lower than that on oleate. The β-ketothiolase activity toward acetoacetyl-CoA in H16ΔphaA and all the multiple mutants remained 10-fold lower than the activity of the wild type, regardless of which carbon source, oleate or gluconate, was employed. During growth on valerate as a sole carbon source, the 9-fold mutant accumulated almost a poly(3-hydroxyvalerate) [poly(3HV)] homopolyester with 99 mol% 3HV constituents.     

3-Hydroxybutyrate Oligomer Hydrolase and 3-Hydroxybutyrate Dehydrogenase Participate in Intracellular Polyhydroxybutyrate and Polyhydroxyvalerate Degradation in Paracoccus denitrificans

Genes encoding 3-hydroxybutyrate oligomer hydrolase (PhaZc) and 3-hydroxybutyrate dehydrogenase (Hbd) were isolated from Paracoccus denitrificans. PhaZc and Hbd were overproduced as His-tagged proteins in Escherichia coli and purified by affinity and gel filtration chromatography. Purified His-tagged proteins had molecular masses of 31 kDa and 120 kDa (a tetramer of 29-kDa subunits). The His-tagged PhaZc hydrolyzed not only 3-hydroxybutyrate oligomers but also 3-hydroxyvalerate oligomers. The His-tagged Hbd catalyzed the dehydrogenation of 3-hydroxyvalerate as well as 3-hydroxybutyrate. When both enzymes were included in the same enzymatic reaction system with 3-hydroxyvalerate dimer, sequential reactions occurred, suggesting that PhaZc and Hbd play an important role in the intracellular degradation of poly(3-hydroxyvalerate). When the phaZc gene was disrupted in P. denitrificans by insertional inactivation, the mutant strain lost PhaZc activity. When the phaZc-disrupted P. denitrificans was complemented with phaZc, PhaZc activity was restored. These results suggest that P. denitrificans carries a single phaZc gene. Disruption of the phaZc gene in P. denitrificans affected the degradation rate of PHA.     

Identification of the intracellular polyhydroxyalkanoate depolymerase gene of Paracoccus denitrificans and some properties of the gene product

Paracoccus denitrificans degraded poly(3-hydroxybutyrate) (PHB) in the cells under carbon source starvation. Intracellular poly(3-hydroxyalkanoate) (PHA) depolymerase gene (phaZ) was identified near the PHA synthase gene (phaC) of P. denitrificans. Cell extract of Escherichia coli carrying lacZ--phaZ fusion gene degraded protease-treated PHB granules. Reaction products were thought to be mainly D(--)-3-hydroxybutyrate (3HB) dimer and 3HB oligomer. Diisopropylfluorophosphonate and Triton X-100 exhibited an inhibitory effect on the degradation of PHB granules. When cell extract of the recombinant E. coli was used, Mg(2+) ion inhibited PHB degradation. However, the inhibitory effect by Mg(2+) ion was not observed using the cell extract of P. denitrificans.     

Isolation of palm oil-utilising, polyhydroxyalkanoate (PHA)-producing bacteria by an enrichment technique

In early attempts to isolate palm oil-utilising bacteria from palm oil mill effluent (POME), diluted liquid samples of POME were spread on agar containing POME as primary nutrient. 45 purified colonies were screened for intracellular lipids by staining with Sudan Black B. Of these, 10 isolates were positively stained. The latter were grown in a nitrogen-limiting medium with palm olein (a triglyceride) or saponified palm olein (salts of fatty acids) as carbon source. None of the isolates grew in the palm olein medium but all grew well in the saponified palm olein medium. Of the latter however, only one isolate was positively stained with Nile Blue A, indicating the presence of PHA. This method did not successfully generate bacterial isolates which could metabolise palm olein to produce PHA. An enrichment technique was therefore developed whereby a selective medium was designed. The latter comprised minerals and palm olein (1% w/v) as sole carbon source to which POME (2.5% v/v) was added as the source of bacteria. The culture was incubated with shaking at 30 degrees C for 4 weeks. Out of seven isolates obtained from the selective medium, two isolates, FLP1 and FLP2, could utilise palm olein for growth and production of the homopolyester, poly(3-hydroxybutyrate). FLP1 is gram-negative and is identified (BIOLOG) to have 80% similarity to Burkholderia cepacia. When grown with propionate or valerate, FLP1 produced a copolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate).     

以葡萄糖为唯一碳源合成聚-4-羟基丁酸的重组大肠杆菌的构建

为实现重组大肠杆菌以葡萄糖为唯一碳源合成均聚的P( 4HB) ,PCR扩增大肠杆菌编码谷氨酸:琥珀酰半缩醛转氨基酶基因(gabT) ,谷氨酸脱羧酶基因(gadA)以及富养罗尔斯通氏菌(Ralstoniaeutropha)H16的4_羟基丁酸脱氢酶基因(gadB) ,并组装到携带富养罗尔斯通氏菌(Ralstoniaeutropha)H16的PHA聚合酶基因(phaC)和克氏梭菌(Clostridiumkluyveri)中编码4_羟基丁酸:CoA转移酶基因(orfZ)的重组质粒pKESS5 3上,形成一个大的操纵元。携带重组质粒的大肠杆菌获得从三羧酸循环的中间物———α_酮戊二酸到P( 4HB)的代谢途径。结果表明,重组大肠杆菌可以以葡萄糖为唯一碳源合成均聚的P( 4HB) ,当向以葡萄糖为唯一碳源的无机培养基添加蛋白胨、酵母提取物、酪蛋白水解物时,P( 4HB)的含量可以高达菌体干重的30 %。     

Synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from activated sludge

Poly-3-hydroxybutyrate (PHB) and poly(3-hydroxybutyrate- co-3-hydroxyvalerate) (PHBV) was produced using a co-culture of activated sludge. When butyric acid was used as sole carbon source, PHB was produced. When valeric acid was added to the medium, PHBV was produced. The 3-hydroxyvalerate (3HV) mole fraction in the PHBV reached a maximum of 54% when valeric acid was used as sole carbon source. When the 3HV units in the co-polymer increased from 0.0 to 54.0 mol%, the melting temperature ( T m ) decreased from 178 to 99°C. The composition, and hence the mechanical properties, of the co-polymer produced by activated sludge can be controlled by adjusting the medium composition.     

Identification and heterologous expression of the polyhydroxyalkanoate biosynthesis genes from Alcaligenes sp. SH-69

Polyhydroxyalkanoate (PHA) biosynthesis genes were cloned and characterized from Alcaligenes sp. SH-69 which can synthesize poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from a single carbon source. The DNA sequence analysis revealed two consecutive genes coding for PHA synthase and -ketothiolase and the gene coding for acetoacetyl-CoA reductase located about 2-kbp downstream of the two genes. Recombinant Escherichia coli strains with the cloned PHA biosynthesis genes synthesized poly(3-hydroxybutyrate) in Luria-Bertani medium containing 2% glucose and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in M9 minimal medium supplemented with 1% glucose, 1 mM valine, and 2 mM threonine, which demonstrates that the PHA biosynthesis genes of Alcaligenes sp. SH-69 are functional in E. coli. © Rapid Science Ltd. 1998     

Isolation of poly(3-hydroxybutyrate) (PHB)-degrading microorganisms and characterization of PHB-depolymerase from Arthrobacter sp. strain W6.

Microbial degraders of poly(3-hydroxybutyrate) (PHB) were isolated from soil. Arthrobacter sp. strain W6 used not only PHB as a carbon source, but also PHAs such as poly(3-hydroxybutyrate-co-[5%]3-hydroxyvalerate), poly(3-hydroxybutyrate-co-[14%]3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-[22%]3-hydroxyvalerate). PHB-depolymerase was purified to homogeneity from the culture broth of Arthrobacter sp. strain W6 by a procedure involving DEAE- and butyl-Toyopearl column chromatographies. The Mr of the enzyme was estimated to be about 47,000 by SDS-polyacrylamide gel electrophoresis. The enzyme was most active at pH 8.5 and 50 degrees C, and was inhibited by phenylmethylsulfonyl fluoride, Hg2+, Ag+, and Pb2+.     

Polyhydroxyalkanoate film formation and synthase activity during in vitro and in situ polymerization on hydrophobic surfaces

In vitro and in situ enzymatic polymerization of polyhydroxyalkanoate (PHA) on two hydrophobic surfaces, a highly oriented pyrolytic graphite (HOPG) and an alkanethiol self-assembled monolayer (SAM), was studied by atomic force microscopy (AFM) and quartz crystal microbalance (QCM), using purified Ralstonia eutropha PHA synthase (PhaC(Re)) as a biocatalyst. (R)-Specific enoyl-CoA hydratase was used to prepare R-enantiomer monomers [(R)-3-hydroxyacyl-CoA] with an acyl chain length of 4-6 carbon atoms. PHA homopolymers with different side-chain lengths, poly[(R)-3-hydroxybutyrate] [P(3HB)] and poly[(R)-3-hydroxyvalerate] [P(3HV)] were successfully synthesized from such R-enantiomer monomers on HOPG substrates. After the reaction, the surface morphologies were analyzed by AFM, revealing a nanometer thick PHA film. The same biochemical polymerization process was observed on an alkanethiol (C18) SAM surface fabricated on a gold electrode using QCM. This analysis showed that a complex sequence of PhaC(Re) adsorption and PHA polymerization has occurred on the hydrophobic surface. On the basis of these observations, the possible mechanisms of the PhaC(Re)-catalyzed polymerization reaction on the surface of hydrophobic substrates are proposed.     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.