Saccharopolyspora hirsuta strain 367 releases JHJ-1, a bacteriophage capable of propagation on old mycelium

Bacteriophage JHJ-1 was isolated from Saccharopolyspora hirsuta strain 367 NRRL 12045 as an endogenous but virulent phage. The plaque size was not self-limiting, since a few p.f.u. could completely lyse a lawn. Electron microscopy showed that this phage belonged to group B of Bradley's morphological classification. The JHJ-1 genome is a linear DNA molecule of 41.1 kbp with cohesive ends and a G + C content of 68.8-70.0 mol%. The DNA cleavage map was established for 12 restriction endonucleases. The host range is apparently very narrow, being limited to two strains of S. hirsuta (NRRL 12045 and NRRL B-5792). However, JHJ-1 did not lytically infect S. hirsuta strain 367 UC 8106. Phage JHJ-1 was shown, by Southern blot analysis, to lysogenize both S. hirsuta NRRL 12045 and UC 8106. It thus appears to behave as a virulent mutant of a temperate phage on one, but not on the other, JHJ-1 lysogen.     

Characterization of SE-3, a virulent bacteriophage of Saccharopolyspora erythraea

SE-3 is a virulent bacteriophage isolated from a large-scale culture of Saccharopolyspora erythraea, an erythromycin producer. The host range of the phage is narrow, limited to some strains of this species. Another strain of Sac. erythraea, and a strain of Sac. hirsuta, are able to adsorb phage particles but do not sustain their complete multiplication. SE-3 is closely related to the phage SE-5 as shown by DNA restriction mapping. The differences between SE-3 and SE-5 genomes are apparently limited to two DNA segments flanked by short inverted repeats, visualized by electron microscopy.     

Characterization of bacteriophage phi C69 of Saccharopolyspora erythraea and demonstration of heterologous actinophage propagation by transfection of Streptomyces and Saccharopolyspora

A bacteriophage, designated phi C69, isolated from a culture of Saccharopolyspora erythraea was characterized. The phage propagates on Sac. erythraea NRRL 2338 but does not infect 10 Streptomyces or 3 Micromonospora species tested. It infects Sac. erythraea NRRL 2359 but does not produce infectious phage particles in this host. phi C69 is approximately 40 kb in length and contains cohesive ends. A cos fragment containing ligated phage DNA ends was cloned in Escherichia coli. Restriction maps of the phage DNA and the cos fragment for several enzymes are shown. Transfection of both Sac. erythraea and Streptomyces lividans with phi C69 resulted in approximately equal titres of infectious phage particles produced from approximately the same number of regenerating cells. Transfection of Sac. erythraea with DNA from Streptomyces phages SH10 and KC404 also resulted in the production of infectious phage particles. The basis for differences among hosts in susceptibility to infection by various actinophages is discussed.     

Phages I alpha and I2-2: IncI plasmid-dependent bacteriophages

Phage I alpha was isolated from sewage from Windhoek, South West Africa. It formed relatively clear plaques about 2 mm in diameter, on sensitive strains of Escherichia coli K12 and Salmonella typhimurium LT2. The phage had an hexagonal outline with a diameter of about 24 nm, contained RNA and was resistant to chloroform. Phage I alpha formed plaques or propagated only on organisms carrying I1 plasmids or the I gamma plasmid R621a. The efficiency of plating was higher on E. coli than on S. typhimurium hosts. The phage adsorbed along the length of shafts of I1 pili. Phage I2-2 was isolated from Pretoria sewage. It was a filamentous virus and individual virions varied considerably in length. Phage I2-2 formed turbid plaques which varied from pin point to about 1 mm in diameter on all hosts. It was resistant to RNAase and sensitive to chloroform. Phage I2-2 had a spectrum of activity limited to strains harbouring I2 plasmids but the adsorption site could not be demonstrated. The phage was not related serologically to phages Ifl or PR64FS.     

Phages C-2 and J: IncC and IncJ plasmid-dependent phages, respectively

Phages C-2 and J were isolated from sewage. Phage C-2 was filamentous and formed plaques on Salmonella typhimurium strains carrying various C plasmids. It also plated on Proteus mirabilis and Serratia marcescens strains carrying particular C plasmids, but failed to form plaques on lines of Escherichia coli K12 strains harbouring most of these plasmids, although in all cases, phage multiplication on the strains was demonstrated. No phage increase occurred in any strain which lacked a C plasmid or contained plasmids of other incompatibility groups. The phage was sensitive to chloroform and, unlike other filamentous bacterial viruses, adsorbed to shafts of conjugative pili. It had a disc-like structure at the end which attached to the pilus. Phage C-2 had a buoyant density of 1 . 30 g cm-3 and a single-stranded circular DNA genome of 3 . 0 MDal. Phage J had an hexagonal head with an inter-apical distance of 40 nm and a short noncontractile tail. It was resistant to chloroform and diethyl ether. The phage formed plaques or propagated on E. coli strains harbouring some IncC plasmids and all IncJ and IncD plasmids tested. The phage did not form plaques but propagated on P. mirabilis and Ser. marcescens strains carrying these plasmids. It did not plate or propagate on S. typhimurium strains harbouring the plasmids. The plaques were very hazy and variable in size. The phage attached sparsely, at a site which appeared to be located at the base of the tail, to sides of conjugative pili.     

Site-specific integration in Saccharopolyspora erythraea and multisite integration in Streptomyces lividans of actinomycete plasmid pSE101.

An 11.3-kilobase-pair plasmid, designated pSE101, exists in Saccharopolyspora erythraea NRRL 2338 as an integrated sequence (pSE101int) at a unique chromosomal location and in the free form in less than an average of 1 copy per 10 chromosomes. The plasmid sequence is missing from S. erythraea NRRL 2359. Restriction maps of the free and integrated forms of pSE101 showed point-to-point correspondence. Plasmid pECT2 was constructed by ligation of pSE101, pBR322, and the gene for thiostrepton resistance (tsr). When introduced by polyethylene glycol-mediated transformation into protoplasts of S. erythraea NRRL 2359, all thiostrepton-resistant regenerants examined were found to carry a single copy of pECT2 in the integrated state at a single chromosomal site. The chromosomal site of pECT2 integration in strain NRRL 2359 (attB) corresponded to the chromosomal location of pSE101int in strain NRRL 2338. The plasmid crossover site (attP) was mapped to the plasmid site that corresponded to the site of interruption of the plasmid sequence in the host carrying pSE101int, indicating that site-specific integrative recombination had occurred. An additional 2.8-kilobase-pair chromosomal sequence homologous to a segment of pSE101 was also observed in strains NRRL 2338 and NRRL 2359. After introduction of pECT2 into Streptomyces lividans, approximately half of the transformants examined were found to carry the plasmid as a stable, autonomously replicating element. The other half carried a single copy of pECT2 as an integrated sequence, but the location of pECT2int in Streptomyces lividans varied from one transformant to another. In each case, integrative crossover used the attP site. A model is proposed to account for the determination of the particular state of pSE101 in Streptomyces lividans.     

Phage t: a group T plasmid-dependent bacteriophage

Phage t was isolated from sewage from Pretoria. It formed plaques only on Escherichia coli and Salmonella typhimurium strains that carried plasmids belonging to incompatibility group T. Five of six group T plasmids permitted visible lysis of R+ host strains. There was no visible lysis of E. coli J53-2 or S. typhimurium LT2trpA8 carrying the T plasmid Rts1 although the strains supported phage growth as indicated by at least a 10-fold increase in phage titre. The latter strains transferred the plasmid at high frequency to E. coli strain CSH2 and the resulting transconjugants plated the phage. Proteus mirabilis strain PM5006(R402) failed to support phage growth although it transferred the plasmid and concomitant phage sensitivity to E. coli J53-2. The phage was hexagonal in outline, RNA-containing, resistant to chloroform and adsorbed to the shafts of pili determined by T plasmids.     

Isolation and Partial Characterization of Two Aeromonas hydrophila Bacteriophages

Two Aeromonas hydrophila bacteriophages, Aeh1 and Aeh2, were isolated from sewage. Both phages showed binal symmetry. The dimensions of A. hydrophila phages Aeh1 and Aeh2 differed from those of the other Aeromonas phages. Also, phage Aeh2 was the largest Aeromonas phage studied to date. Phage Aeh1 formed small, clear plaques, and phage Aeh2 formed turbid plaques with clear centers. Both phages were sensitive to chloroform treatment, being totally inactivated after treatment for 1 h at 60°C at pH 3 and 11. However, the infectivity of Aeh1 phage stocks increased by approximately fivefold after they were treated at pH 10 for 1 h at 22°C. Phages Aeh1 and Aeh2 were serologically unrelated and had latent periods of 39 and 52 min, respectively. The average burst sizes of phages Aeh1 and Aeh2 were 17 and 92 PFU per cell, respectively. Phage Aeh1 infected 13 of 22 A. hydrophila strains tested, whereas phage Aeh2 infected only its original host. Phage Aeh1 infected some A. hydrophila strains only at or below 37°C. Neither phage infected the two A. (Plesiomonas) shigelloides strains used in this study.     

Properties of R plasmid R772 and the corresponding pilus-specific phage PR772.

R plasmid R772 was isolated from a strain of Proteus mirabilis and is a self-transmissible P-1 incompatibility group plasmid having a molecular weight of about 27 x 10(6). It renders bacterial hosts resistant to kanamycin. Phage PR772 was isolated as a phage dependent on the presence of R772 in bacterial hosts. It is hexagonal-shaped with a diameter of 53 nm, has a thick inner membrane and no tail. Vaguely defined appendages are sometimes apparent at some vertices and the phage possesses double-stranded DNA. The DNA has a guanine plus cytosine molar content of 48%. The phage is sensitive to chloroform and has a buoyant density of 1.26 g cm(-3). These observations suggested that the inner membrane of the phage could contain lipid. Phage PR772 differs in morphology from the double-stranded DNA plasmid-specific phages PR4 and PRR1 which adsorb to tips and sides, respectively, of sex pili coded for by P-1 incompatibility group plasmids. Phage PR772 formed clear plaques which varied in diameter. Serologically, phages PR772 and PR4 are possibly related though very distantly, but the two phages have identical host ranges. Phage PR772 adsorbed by one of its apices to tips of sex pili coded for by plasmid R772 in Escherichia coli. It also formed plaques on Salmonella typhimurium Proteus morganii and Providence strains harbouring this plasmid as well as strains of E. coli carrying plasmids of incompatibility groups N or W. The phage produced areas of partial clearing on lawns of P. mirabilis PM5006 harbouring plasmid R772, the P-1 incompatibility group plasmid RP4, the W group plasmid RSa or the N group plasmid N3, and on lawns of Providence strain P29 carrying plasmid RP4.     

Distribution of oxoacyl synthase homology sequences within Streptomyces DNA

Abstract A genomic DNA sequence of Streptomyces strain ISP 5485 was cloned, sequenced and compared with corresponding information from nucleic acid data banks. The DNA sequence was unique, but showed homology to DNA coding for the condensing enzyme, 2-oxoacyl synthase, of the deoxyerythronolide B synthase complex (DEBS) from Saccharopolyspora erythraea NRRL 2338. A subfragment of the sequenced DNA was used to construct a gene-specific probe that formed part of the putative 2-oxoacyl synthase gene. The PCR-amplified and labelled probe was used in hybridization experiments involving 33 streptomycete strains that produced different classes of antibiotics. The probe showed widespread homology with DNA considered to be part of analogous genes within genomes of different polyketide producers. The implications of the probe homology to bacterial chromosomal DNA are discussed.     

Isolation and Characterization of a Generalized Transducing Bacteriophage for Acinetobacter

A series of bacteriophages which grow in various strains of Acinetobacter have been isolated. One of these, phage P78, which forms turbid plaques on Acinetobacter strain 78 is specific for this particular host and fails to attack 389 other independently isolated strains of Acinetobacter. Phage P78 appears to be a temperate phage which lysogenizes its host. Various agents such as N-methyl-N'-nitro-N-nitrosoguanidine, diethyl sulfate, mitomycin C, and ultraviolet light are effective inducers of the lysogen. Phage lysates of wild-type cells are capable of transducing auxotrophs of strain 78 to prototrophy at frequencies ranging from 0.3 x 10(-7) to 34 x 10(-7) per plaque-forming unit adsorbed. To date, no linkage has been detected between any of the markers studied in two-factor crosses. Donor phage grown in one particular mutant, strain 78 (arg-1), has been shown to give rise to significantly higher transduction frequencies than when phage is grown on wild-type or other auxotrophic strains. Phage P78 is rapidly adsorbed to its bacterial host and has a latent period of 25 min, and infection results in a burst size of approximately 50. Some of the physical properties of phage P78 and its DNA are described.     

一株感染铜绿假单胞菌的双链RNA噬菌体PaP6的分离和鉴定

【目的】鉴定一株新分离的铜绿假单胞菌噬菌体PaP6的生物学特性。【方法】利用铜绿假单胞菌临床分离株PA038为宿主,从西南医院污水中分离得到一株裂解性噬菌体PaP6,观察其噬斑特点;氯化铯密度梯度离心纯化噬菌体颗粒后,用透射电子显微镜观察噬菌体形态;提取PaP6基因组,通过DNA酶和RNA酶酶切,做基因组酶切图谱分析;按照感染复数(MOI)分别为10、1、0.1、0.01、0.001和0.000 1加入噬菌体和宿主菌,裂解细菌后,测定噬菌体滴度;以MOI=10的比例加入噬菌体和宿主菌,绘制一步生长曲线;用112株铜绿假单胞菌临床分离株检测PaP6宿主谱。【结果】PaP6的噬斑直径约2 mm-4 mm,圆形透明,边缘清晰;PaP6噬菌体呈多面体立体对称的头部,直径约45 nm;酶切图谱表明PaP6基因组对DNase不敏感,对RNase敏感,未酶切基因组具有3节段双链RNA(dsRNA),长度分别约为9.0、4.5、3.5 kb,共约17 kb;当MOI为0.1时PaP6感染其宿主菌产生的子代噬菌体滴度最高,达到3.4×109 PFU/m L;用一步生长曲线描绘了其生长特性;PaP6可以感染40.1%的临床分离株,是一株比较广谱的噬菌体。【结论】首次报道了一株铜绿假单胞菌的ds RNA分节段噬菌体,分类学上属于囊病毒科,该噬菌体具有较广的宿主谱,在噬菌体治疗领域具有应用前景。     

Growth of coliphage BF23 on rough strains of Salmonella typhimurium: the bfe locus

Summary Coliphage BF23 develops in Salmonella typhimurium rough strains. The phage is neither restricted nor modified by S. typhimurium. The growth patterns of the phage were slightly different in S. typhimurium than in Escherichia coli, although phage propagated on S. typhimurium is identical to the phage propagated in E. coli by several criteria used. Mutants of S. typhimurium resistant to BF23 were isolated and found to map (by P22-and Plmediated transduction) in the same position as bfe mutants of E. coli. The order of genes was: metB-argC-bfe-rif-purD-metA.Phage BF23 does not form plaques on smooth S. typhimurium strains, since the phage fails to adsorb irreversibly to smooth cells. Nevertheless, on solid agar, the phage prevents growth of many (but not all) smooth strains. Moreover, UV-and alkali-inactivated phage BF23, although unable to form plaques on sensitive hosts, retains the ability to prevent growth of the host on solid medium. This ability is sensitive to protease and resistant to DNAse and RNase. Heat treatment of the phage causes rapid loss of the cell-growth-preventing-ability whereas the ability to form plaques is lost much more slowly. These results lead to a proposal that phage BF23 virions carry a colicin-like factor that kills sensitive cells.     

Phage tf-1: a filamentous bacteriophage specific for bacteria harbouring the IncT plasmid pIN25

Phage tf-1 is a filamentous phage which is about 800 nm in length, 10 nm in width and has slightly tapered ends. The phage was isolated from sewage and formed plaques or propagated only on Escherichia coli, Salmonella typhimurium and Klebsiella oxytoca strains harbouring the IncT plasmid pIN25 at 30 degrees C. It adsorbed in large numbers to pIN25-encoded long thick flexible conjugative pili formed at 30 degrees C and also to the short form of these pili synthesized at 37 degrees C. The reason for the failure to form plaques at 37 degrees C is not known. The adsorption site is a short length of the pilus shaft extending 100-200 nm back from the distal tip. Efficient phage tf-1 adsorption to the same site was found for pili determined by other IncT plasmids in spite of the fact that phage tf-1 did not plate or propagate on strains harbouring them. However, areas of specific partial clearing on lawns of these plasmid-containing bacteria were produced by phage in high concentrations. Lack of plaque-formation could be due to inefficient intracellular assembly coupled to avid adsorption of any liberated phage to pili. The phage differs from all but one other filamentous phage by being sensitive to diethyl ether.     

Partial characterization of coliphage WPK and a comparison with coliphage T3.

Coliphage WPK was originally isolated from sewage in Kiel, Germany, because its plaque diameter continued to expand for days. Electron microscopy revealed an isometric capsid with dimensions of 54 nm between opposite apices, and a short, noncontractile tail 16 nm long, placing phage WPK into morphogroup C1. The nucleic acid of phage WPK was linear double stranded DNA. The host ranges of phages WPK and T3 were identical. Of ten E. coli strains tested for host range, two were resistant and of eighteen other Enterobacteriaceae only four were susceptible. Seven gram-negative species which are not members of the Enterobacteriaceae were refractory. However, there were differences in plaque morphology and plaque expansion between the two phages. Phage T3 plaques expanded for at least seven days on E. coli B only, while phage WPK plaques expanded for at least seven days on four strains of E. coli. The buoyant density of WPK, determined by isopycnic density gradient centrifugation in CsCl, was 1,508 g/ml which was significantly different than that of T3 at 1.493 g/ml (P less than 0.05). Phage-encoded proteins were examined for each phage using [35S]methionine incorporation, SDS-PAGE, and autoradiography. Of thirty proteins identified in phage WPK and twenty-eight in phage T3, only fourteen were of the same size in both. We concluded that phage WPK was distinct, but related to T3.     

The isolation of a staphylococcal phage variant susceptible to an unusual host control

A series of phage P₁ variants was isolated from plaques developing on S. aureus WF 145. One in particular, phage 14, was studied in detail because its host range appeared to be dependent on the previous host of production; i.e., it was subject to a host control. When this phage was produced on host K₁ its lysate assayed equally well on both 145 and K₁ cells. When produced on host 145, however, it assayed manyfold higher on 145 than on host K₁. All its particles adsorbed on K₁ cells, but only a small percentage were able to produce plaques. No differences could be found in adsorption rates, latent periods, or burst sizes of the phage on the two hosts. No extracellular inactivating substances could be detected which could account for such changes, nor could the results be explained readily on a mutational basis, since distinct phage strains could not be isolated. The change in virus properties was found to occur in the first burst of singly infected host 145 cells, regardless of the previous host or its prior lytic abilities. Heat inactivation destroyed activity for K₁ cells more rapidly than for 145 cells. This was found to be a property of both the stock phage P₁ and phage 14. Phage 14 could be heated until there remained particles which could multiply only on strain 145. When the plaques of such survivors were examined they were found to contain phage which could multiply on both hosts in a ratio characteristic of the original unheated preparation. The data suggest that the observed changes were caused by a host control over the formation of a phage material(s) necessary for successful infection of host K₁. Such a substance theoretically could be related to the labile material destroyed by heat and required for plaque formation on host K₁.     

Growth of Bacteriophage H on Male and Female Strains of Escherichia coli

Phage H propagated on Yersinia pestis was reported by Molnar and Lawton to be rapidly adsorbed to female but not to male strains of Escherichia coli. In contrast, we find phage H adsorbs to all E. coli strains tested (both male and female) and forms plaques on a wide variety of male strains. Phage H appears to be related to the T3-T7 group of coliphages.     

Lysogenic Strains of Group N Lactic Streptococci

A temperate bacteriophage, designated r(1)t, was inducible from the group N lactic streptococcus, Streptococcus cremoris R(1), by ultraviolet irradiation or mitomycin C treatment. Induced lysates produced plaques on lawns of three closely related S. cremoris strains, AM(1), SK(11), and US(3). Strain SK(11) was readily lysogenized. S. cremoris AM(1) was the most reliable indicator strain, although the age of the culture used for seeding plates was critical. Zones of lysis but no plaque formation were observed on lawns of nine additional S. cremoris strains. Phage r(1)t could not be detected in filtrates of stationary-phase R(1) cultures and was near the limits of detection in logarithmically growing cultures. Phage levels were still very low (1 plaque-forming unit on AM(1) per 10 induced cells) in induced lysates of R(1) cultures. These low levels of detectable phage may be attributable to an inadequate indicator, lysogenization of the indicator, adsorption of induced phage to cellular debris, concurrent induction of other undetectable phages, or the production of high proportions of defective phages. Electron micrographs of induced R(1) lysates revealed a high incidence of incomplete phage particles, fragments, and ghosts.     

Phage pilH alpha: a phage which adsorbs to IncHI and IncHII plasmid-coded pili

Phage pilH alpha was specific for bacterial strains, of various genera, harbouring plasmids of the HI and HII incompatibility groups. Plaque formation was temperature sensitive in that plaques formed at 26 degrees C but not at 37 degrees C. Plaques were fairly clear, irregular in outline and varied from pin point to about 2 mm in diameter on all hosts where plaques were detected. The phage had an isometric hexagonal outline with a diameter of 25 nm. It contained RNA but differed from all but one other plasmid-dependent RNA phage by being sensitive to chloroform. It adsorbed along the length of the shafts of IncHI and HII plasmid-coded pili.