Investigation of the iron-sulfur cluster in Mycobacterium tuberculosis APS reductase: implications for substrate binding and catalysis

The sulfur assimilation pathway is a key metabolic system in prokaryotes that is required for production of cysteine and cofactors such as coenzyme A. In the first step of the pathway, APS reductase catalyzes the reduction of adenosine 5'-phosphosulfate (APS) to adenosine 5'-phosphate (AMP) and sulfite with reducing equivalents from the protein cofactor, thioredoxin. The primary sequence of APS reductase is distinguished by a conserved iron-sulfur cluster motif, -CC-X( approximately )(80)-CXXC-. Of the sequence motifs that are associated with 4Fe-4S centers, the cysteine dyad is atypical and has generated discussion with respect to coordination as well as the cluster's larger functional significance. Herein, we have used biochemical, spectroscopic, and mass spectrometry analysis to investigate the iron-sulfur cluster and its role in the mechanism of Mycobacterium tuberculosis APS reductase. Site-directed mutagenesis of any cysteine residue within the conserved motif led to a loss of cluster with a concomitant loss in catalytic activity, while secondary structure was preserved. Studies of 4Fe-4S cluster stability and cysteine reactivity in the presence and absence of substrates, and in the free enzyme versus the covalent enzyme-intermediate (E-Cys-S-SO(3)(-)), suggest a structural rearrangement that occurs during the catalytic cycle. Taken together, these results demonstrate that the active site functionally communicates with the iron-sulfur cluster and also suggest a functional significance for the cysteine dyad in promoting site differentiation within the 4Fe-4S cluster.     

On the relative contribution of ionic interactions over iron-sulfur clusters to ferredoxin stability

Metal centres play an important structural role in maintaining the native conformation of a protein. Here we use biophysical methods to investigate what is the relative contribution of iron-sulfur clusters in respect to ionic interactions in a thermophilic di-cluster ferredoxin model. Changes in protonation affect both the stability and the conformational dynamics of the protein fold. In the pH 5.5-8 interval, the protein has a high melting temperature (T(m) approximately 120 degrees C), which decreases towards pH extremes. Acidification triggers events in two steps: down to the isoelectric point (pH 3.5) the Fe-S clusters remain unchanged, the secondary structure content increases and the single Trp becomes more solvent shielded, denoting a more compact fold. Further acidification down to pH 2 sets off exposure of the hydrophobic core and Fe-S cluster disintegration, yielding a molten globule state. The relative stabilising contribution of the clusters becomes evident when stabilising ionic interactions are switched off as a result of poising the protein at pH 3.5, at an overall null charge: under these conditions, the Fe-S clusters disassemble at T(m)=72 degrees C, whereas the protein unfolds at T(m)=52 degrees C. Overall, this ferredoxin denotes a considerable structural plasticity around its native conformation, a property which appears to depend more on the integrity of its metal clusters rather than on the status of its stabilising electrostatic interactions. The latter however play a relevant role in determining the protein thermal stability.     

Probing the conformation of a human apolipoprotein C-1 by amino acid substitutions and trimethylamine-N-oxide.

To test, at the level of individual amino acids, the conformation of an exchangeable apolipoprotein in aqueous solution and in the presence of an osmolyte trimethylamine-N-oxide (TMAO), six synthetic peptide analogues of human apolipoprotein C-1 (apoC-1, 57 residues) containing point mutations in the predicted alpha-helical regions were analyzed by circular dichroism (CD). The CD spectra and the melting curves of the monomeric wild-type and plasma apoC-1 in neutral low-salt solutions superimpose, indicating 31 +/- 4% alpha-helical structure at 22 degrees C that melts reversibly with T(m,WT) = 50 +/- 2 degrees C and van't Hoff enthalpy deltaH(v,WT)(Tm) = 18 +/- 2 kcal/mol. G15A substitution leads to an increased alpha-helical content of 42 +/- 4% and an increased T(m,G15A) = 57 +/- 2 degrees C, which corresponds to stabilization by delta deltaG(app) = +0.4 +/- 1.5 kcal/mol. G15P mutant has approximately 20% alpha-helical content at 22 degrees C and unfolds with low cooperativity upon heating to 90 degrees C. R23P and T45P mutants are fully unfolded at 0-90 degrees C. In contrast, Q31P mutation leads to no destabilization or unfolding. Consequently, the R23 and T45 locations are essential for the stability of the cooperative alpha-helical unit in apoC-1 monomer, G15 is peripheral to it, and Q31 is located in a nonhelical linker region. Our results suggest that Pro mutagenesis coupled with CD provides a tool for assigning the secondary structure to protein groups, which should be useful for other self-associating proteins that are not amenable to NMR structural analysis in aqueous solution. TMAO induces a reversible cooperative coil-to-helix transition in apoC-1, with the maximal alpha-helical content reaching 74%. Comparison with the maximal alpha-helical content of 73% observed in lipid-bound apoC-1 suggests that the TMAO-stabilized secondary structure resembles the functional lipid-bound apolipoprotein conformation.     

Removal of a cysteine ligand from rubredoxin: assembly of Fe2S2 and Fe(S-Cys)3(OH) centres

The electron transfer protein rubredoxin from Clostridium pasteurianum contains an Fe(S-Cys)(4) active site. Mutant proteins C9G, C9A, C42G and C42A, in which cysteine ligands are replaced by non-ligating Gly or Ala residues, have been expressed in Escherichia coli. The C42A protein expresses with a Fe(III)(2)S(2) cluster in place. In contrast, the other proteins are isolated in colourless forms, although a Fe(III)(2)S(2) cluster may be assembled in the C42G protein via incubation with Fe(III)and sulfide. The four mutant proteins were isolated as stable mononuclear Hg(II)forms which were converted to unstable mononuclear Fe(III)preparations that contain both holo and apo protein. The Fe(III)systems were characterized by metal analysis and mass spectrometry and by electronic, electron paramagnetic resonance, X-ray absorption and resonance Raman spectroscopies. The dominant Fe(III) form in the C9A preparation is a Fe(S-Cys)(3)(OH) centre, similar to that observed previously in the C6S mutant protein. Related centres are present in the proteins NifU and IscU responsible for assembly and repair of iron-sulfur clusters in both prokaryotic and eukaryotic cells. In addition to Fe(S-Cys)(3)(OH) centres, the C9G, C42G and C42A preparations contain a second four-coordinate Fe(III)form in which a ligand appears to be supplied by the protein chain.     

Thermal stability of Clostridium pasteurianum rubredoxin: deconvoluting the contributions of the metal site and the protein

To provide a framework for understanding the hyperthermostability of some rubredoxins, a comprehensive analysis of the thermally induced denaturation of rubredoxin (Rd) from the mesophile, Clostridium pasteurianum was undertaken. Rds with three different metals in its M(SCys)4 site (M = Fe3+/2+, Zn2+, or Cd2+) were examined. Kinetics of metal ion release were monitored anaerobically at several fixed temperatures between 40 and 100 degrees C, and during progressive heating of the iron-containing protein. Both methods gave a thermal stability of metal binding in the order Fe2+ < Fe3+ < Zn2+ < Cd2+. The temperature at which half of the iron was released from the protein in temperature ramp experiments was 69 degrees C for Fe2+ Rd and 83 degrees C for Fe3+ Rd. Temperature-dependent changes in the protein structure were monitored by differential scanning calorimetry, tryptophan fluorescence, binding of a fluorescent hydrophobic probe, and 1H NMR. Major but reversible structural changes, consisting of swelling of the hydrophobic core and opening of a loop region, were found to occur at temperatures (50-70 degrees C) much lower than those required for loss of the metal ion. For the three divalent metal ions, the results suggest that the onset of the reversible, lower-temperature structural changes is dependent on the size of the MS4 site, whereas the final, irreversible loss of metal ion is dependent on the inherent M-SCys bond strength. In the case of Fe3+ Rd, stoichiometric Fe3+/cysteine-ligand redox chemistry also occurs during metal ion loss. The results indicate that thermally induced unfolding of the native Cp Rd must surmount a significant kinetic barrier caused by stabilizing interactions both within the protein and within the M(SCys)4 site.     

Mutations in the tether region of the iron-sulfur protein affect the activity and assembly of the cytochrome bc(1) complex of yeast mitochondria

Resolution of the crystal structure of the mitochondrial cytochrome bc(1) complex has indicated that the extra-membranous extrinsic domain of the iron-sulfur protein containing the 2Fe2S cluster is connected by a tether to the transmembrane helix that anchors the iron-sulfur protein to the complex. To investigate the role of this tether in the cytochrome bc(1) complex, we have mutated the conserved amino acid residues Ala-86, Ala-90, Ala-92, Lys-93 and Glu-95 and constructed deletion mutants DeltaVLA(88-90) and DeltaAMA(90-92) and an insertion mutant I87AAA88 in the iron-sulfur protein of the yeast, Saccharomyces cerevisiae. In cells grown at 30 degrees C, enzymatic activities of the bc(1) complex were reduced 22-56% in mutants A86L, A90I, A92C, A92R and E95R, and the deletion mutants, DeltaVLA(88-90) and DeltaAMA(90-92), while activity of the insertion mutant was reduced 90%. No loss of cytochromes b or c-c(1), detected spectrally, or the iron-sulfur protein, determined by quantitative immunoblotting, was observed in these mutants with the exception of the mutants of Ala-92 in which the loss of activity paralleled a loss in the amount of the iron-sulfur protein. EPR spectroscopy revealed no changes in the iron-sulfur cluster of mutants A86L, A90I, A92R or the deletion mutant DeltaVLA(88-90). Greater losses of both protein and activity were observed in all of the mutants of Ala-92 as well as in A90F grown at 37 degrees C. suggesting that these conserved alanine residues may be involved in maintaining the stability of the iron-sulfur protein and its assembly into the bc(1) complex. By contrast, no significant loss of iron-sulfur protein was observed in the mutants of Ala-86 in cells grown at either 30 degrees C or 37 degrees C despite the 50-70% loss of enzymatic activity suggesting that Ala-86 may play a critical role in catalysis in the bc(1) complex.     

On the role of Fe2+ in bacterial photosynthesis. The effect of biosynthetic substitution of Fe2+ by Mn2+ on the electron transfer step Q-1Q2----Q1Q-2 in reaction centers

A test of the 'iron-wire' hypothesis for the role of Fe2+ in promoting the electron transfer between the primary (Q1) and secondary (Q2) quinones in bacterial reaction centers of Rhodopseudomonas sphaeroides strain R-26.1 has been conducted. Kinetics of this step, P+Q-1Q2----P+Q1Q-2, and of recombination with the oxidized donor, P+Q-1----PQ1 and P+Q-2----PQ2, were followed optically at 4 degrees C in normal iron-containing reaction centers and in reaction centers having 58% Mn2+, replacing Fe2+. This significant replacement is accomplished biosynthetically by control of the growth conditions, and so should preserve the native interactions between the cofactors. There are no significant differences observed in the recombination kinetics of the two types of reaction centers. The electron transfer between the quinones was observed to show apparent biphasic kinetics with major components of approx. 170 microseconds and 1.5 ms at 4 degrees C and pH = 7.5. There is no statistically significant difference observed between the two types of reaction centers. This major change in the electronic structure of the metal and the unaltered kinetics discount the likelihood of any direct orbital participation of the metal in the electron transfer between the quinones.     

Zinc and an N-terminal extra stretch of the ferredoxin from a thermoacidophilic archaeon stabilize the molecule at high temperature.

Ferredoxin from the thermoacidophilic archaeon Sulfolobus sp. strain 7 has a 36-residue extra domain at its N-terminus and a 67-residue core domain carrying two iron-sulfur clusters. A zinc ion is held at the interface of the two domains through tetrahedral coordination of three histidine residues (-6, -19 and -34) and one aspartic acid residue (-76) [Fujii, T., Hata, Y., Oozeki, M., Moriyama, H., Wakagi, T., Tanaka, N. & Oshima, T. (1997) Biochemistry 36, 1505-1513]. To elucidate the roles of the novel zinc ion and the extra N-terminal domain, a series of truncated mutants was constructed: G1, V12, S17, G23, L31 and V38, which lack residues 0, 11, 16, 22, 30 and 37 starting from the N-terminus, respectively. A mutant with two histidine residues each replaced by an alanine residue, H16A/H19A, was also constructed. All the mutant ferredoxins had two iron-sulfur clusters, while zinc was retained only in G1 and V12. The thermal stability of the proteins was investigated by monitoring A408; the melting temperature (Tm) was approximately 109 degrees C for the natural ferredoxin, approximately 109 degrees C for G1, 97.6 degrees C for V12, 89.0 degrees C for S17, 89.2 degrees C for G23, 89.3 degrees C for L31, 82.1 degrees C for V38, and 89.4 degrees C for H16A/H19A. Km and Vmax values of 2-oxoglutarate:ferredoxin oxidoreductase for natural ferredoxin, G1, S17 and L31 were similar, suggesting that electron-accepting activities were not affected by the deletion. The combination of CD and fluorescent spectroscopic analyses with truncated mutant S17 indicated that not only the clusters but also the secondary and tertiary structures were simultaneously degraded at a Tm around 89 degrees C. These results unequivocally demonstrate that the zinc ion and certain parts, but not all, of the extra sequence stretch in the N-terminal domain are responsible not for function but for thermal stabilization of the molecule.     

Identification of the iron-sulfur center of spinach ferredoxin-nitrite reductase as a tetranuclear center, and preliminary EPR studies of mechanism.

EPR spectroscopic and chemical analyses of spinach nitrite reductase show that the enzyme contains one reducible iron-sulfur center, and one site for binding either cyanide or nitrite, per siroheme. The heme is nearly all in the high spin ferric state in the enzyme as isolated. The extinction coefficient of the enzyme has been revised to E386 = 7.6 X 10(4) cm-1 (M heme)-1. The iron-sulfur center is reduced with difficulty by agents such as reduced methyl viologen (equilibrated with 1 atm of H2 at pH 7.7 in the presence of hydrogenase) or dithionite. Complexation of the enzyme with CO (a known ligand for nitrite reductase heme) markedly increases the reducibility of the iron-sulfur center. New chemical analyses and reinterpretation of previous data show that the enzyme contains 6 mol of iron and 4 mol of acid-labile S2-/mol of siroheme. The EPR spectrum of reduced nitrite reductase in 80% dimethyl sulfoxide establishes clearly that the enzyme contains a tetranuclear iron-sulfur (Fe4S4) center. The ferriheme and Fe4S4 centers are reduced at similar rates (k = 3 to 4 s-1) by dithionite. The dithionite-reduced Fe4S4 center is rapidly (k = 100 s-1) reoxidized by nitrite. These results indicate a role for the Fe4S4 center in catalysis.     

Formate dehydrogenase of Clostridium pasteurianum

Formate dehydrogenase was purified to electrophoretic homogeneity from N2-fixing cells of Clostridium pasteurianum W5. The purified enzyme has a minimal Mr of 117,000 with two nonidentical subunits with molecular weights of 76,000 and 34,000, respectively. It contains 2 mol of molybdenum, 24 mol of nonheme iron, and 28 mol of acid-labile sulfide per mol of enzyme; no other metal ions were detected. Analysis of its iron-sulfur centers by ligand exchange techniques showed that 20 iron atoms of formate dehydrogenase can be extruded as Fe4S4 centers. Fluorescence analysis of its isolated molybdenum centers suggests it is a molybdopterin. The clostridial formate dehydrogenase has a pH optimum between 8.3 and 8.5 and a temperature optimum of 52 degrees C. The Km for formate is 1.72 mM with a Vmax of 551 mumol of methyl viologen reduced per min per mg of protein. Sodium azide competes competitively with formate (K1 = 3.57 microM), whereas the inactivation by cyanide follows pseudo-first-order kinetics with K = 5 X 10(2) M-1 s-1.     

Mesoscopic structure in the chain-melting regime of anionic phospholipid vesicles: DMPG

In a range of low ionic strength, aqueous dispersions of the anionic phospholipid DMPG (dimyristoylphosphatidylglycerol) have a transparent intermediate phase (IP, between T(m)(on) congruent with 20 degrees C and T(m)(off) congruent with 30 degrees C) between the turbid gel and fluid membrane phases, evidenced in turbidity data. Small angle x-ray scattering results on DMPG dispersions show that, besides the bilayer peak present in all phases, a peak corresponding to a mesoscopic structure at approximately 400 A is detected only in IP. The dependence of this peak position on DMPG concentration suggests a correlation in the bilayer plane, consistent with the stability of vesicles in IP. Moreover, observation of giant DMPG vesicles with phase contrast light microscopy show that vesicles "disappear" upon cooling below T(m)(off) and "reappear" after reheating. This further proves that although vesicles cannot be visualized in IP, their overall structure is maintained. We propose that the IP in the melting regime corresponds to unilamellar vesicles with perforations, a model which is consistent with all described experimental observations. Furthermore, the opening of pores across the membrane tuned by ionic strength, temperature, and lipid composition is likely to have biological relevance and could be used in applications for controlled release from nanocompartments.     

Spectroscopic studies on the iron-sulfur centers of milk xanthine oxidase

The optical electron paramagnetic resonance and M?ssbauer spectral properties of the two iron-sulfur centers present in milk xanthine oxidase have been reexamined. It is found in the case of the optical spectral change observed on reduction of the enzyme that the two centers contribute approximately equally, with a ratio of spectral contributions for Fe/S I and Fe/S II of 0.55:0.45. This conclusion is based both on the behavior of the spectral change at wavelengths where only the two iron-sulfur centers contribute to the spectral change (under experimental conditions minimizing the effect of flavin semiquinone) during reductive titrations and a comparison of the spectra of 1- and 2-electron reduced enzyme under different conditions. This very similar spectral weighting for the two centers applies throughout the visible region. In the case of the EPR spectra, it is found from computer simulation of the signals observed under nonsaturating conditions that iron-sulfur center II exhibits g values of 1.902, 1.991, and 2.110 and does not exhibit two g values above that for the free electron, as has been reported (Lowe, J., Lynden-Bell, R.M., and Bray, R. C. (1972) Biochem. J. 130, 239-249). The g values for iron-sulfur center I obtained from the simulations are 1.894, 1.932, and 2.022. Finally, M?ssbauer spectra of xanthine oxidase have been obtained, and it is found that while the two iron-sulfur centers are indistinguishable in the oxidized state, the ferrous iron in one of the reduced iron-sulfur centers exhibits an unusually large quadrupole coupling.     

Energetic basis of molecular recognition in a DNA aptamer

The thermal stability and ligand binding properties of the L-argininamide-binding DNA aptamer (5'-GATCGAAACGTAGCGCCTTCGATC-3') were studied by spectroscopic and calorimetric methods. Differential calorimetric studies showed that the uncomplexed aptamer melted in a two-state reaction with a melting temperature T(m)=50.2+/-0.2 degrees C and a folding enthalpy DeltaH(0)(fold)=-49.0+/-2.1 kcal mol(-1). These values agree with values of T(m)=49.6 degrees C and DeltaH(0)(fold)=-51.2 kcal mol(-1) predicted for a simple hairpin structure. Melting of the uncomplexed aptamer was dependent upon salt concentration, but independent of strand concentration. The T(m) of aptamer melting was found to increase as L-argininamide concentrations increased. Analysis of circular dichroism titration data using a single-site binding model resulted in the determination of a binding free energy DeltaG(0)(bind)=-5.1 kcal mol(-1). Isothermal titration calorimetry studies revealed an exothermic binding reaction with DeltaH(0)(bind)=-8.7 kcal mol(-1). Combination of enthalpy and free energy produce an unfavorable entropy of -TDeltaS(0)=+3.6 kcal mol(-1). A molar heat capacity change of -116 cal mol(-1) K(-1) was determined from calorimetric measurements at four temperatures over the range of 15-40 degrees C. Molecular dynamics simulations were used to explore the structures of the unligated and ligated aptamer structures. From the calculated changes in solvent accessible surface areas of these structures a molar heat capacity change of -125 cal mol(-1) K(-1) was calculated, a value in excellent agreement with the experimental value. The thermodynamic signature, along with the coupled CD spectral changes, suggest that the binding of L-argininamide to its DNA aptamer is an induced-fit process in which the binding of the ligand is thermodynamically coupled to a conformational ordering of the nucleic acid.     

Biphasic transitions of a hairpin hexanucleotide triplex DNA

The conformational transitions (helix-coil transitions) of three hairpin triple helices, models 5'-(A-G)(3) + 5'-(T-C)(3)-T(4)-((br)C-T)(3) [CY], 5'-(A-G)(3) + 5'-(T-(br)C)(3)-T(4)-(C-T)(3) [YC] and 5'-(A-G)(3) + 5'-(T-(br)C)(3)-T(4)-((br)C-T)(3) [YY], are characterized in this work by UV spectroscopy. Melting of these triplexes is biphasic, and the profiles are used to obtain the thermodynamic parameters. The thermodynamic properties of the hairpin triplex are T(m) = 19.45 degrees C and DeltaH(vH) = 293.12 kJ mol(-1) for CY, T(m) = 22.85 degrees C and DeltaH(vH) = 256.63 kJ mol(-1) for YC and T(m) = 28.47 degrees C and DeltaH(vH) = 234.68 kJ mol(-1) for YY at pH 4.4. Those of the duplex are T(m) = 30.50 degrees C and DeltaH(vH) = 427.09 kJ mol(-1) for CY, T(m) = 32.96 degrees C and DeltaH(vH) = 374.47 kJ mol(-1) for YC and T(m) = 33.24 degrees C and DeltaH(vH) = 329.67 kJ mol(-1) for YY at pH 4.4. The distinct transitions of triplex to duplex and duplex to single strands are analyzed using the nearest-neighbor Ising model. Electrostatic effects on each conformation are also analyzed.     

Calorimetric investigations of the structural stability and interactions of colicin B domains in aqueous solution and in the presence of phospholipid bilayers

The effects of pH and temperature on the stability of interdomain interactions of colicin B have been studied by differential-scanning calorimetry, circular dichroism, and fluorescence spectroscopy. The calorimetric properties were compared with those of the isolated pore-forming fragment. The unfolding profile of the full-length toxin is consistent with two endothermic transitions. Whereas peak A (T(m) = 55 degrees C) most likely corresponds to the receptor/translocation domain, peak B (T(m) = 59 degrees C) is associated with the pore-forming domain. By lowering the pH from 7 to 3.5, the transition temperature of peaks A and B are reduced by 25 and 18 degrees C, respectively, due to proton exchange upon denaturation. The isolated pore-forming fragment unfolds at much higher temperatures (T(m) = 65 degrees C) and is stable throughout a wide pH range, indicating that intramolecular interactions between the different colicin B domains result in a less stable protein conformation. In aqueous solution circular dichroism spectra have been used to estimate the content of helical secondary structure of colicin B ( approximately 40%) or its pore-forming fragment ( approximately 80%). Upon heating, the ellipticities at 222 nm strongly decrease at the transition temperature. In the presence of lipid vesicles the differential-scanning calorimetry profiles of the pore-forming fragment exhibit a low heat of transition multicomponent structure. The heat of transition of membrane-associated colicin B (T(m) = 54 degrees C at pH 3.5) is reduced and its secondary structure is conserved even at intermediate temperatures indicating incomplete unfolding due to strong protein-lipid interactions.     

Disulfide bond effects on protein stability: designed variants of Cucurbita maxima trypsin inhibitor-V

Attempts to increase protein stability by insertion of novel disulfide bonds have not always been successful. According to the two current models, cross-links enhance stability mainly through denatured state effects. We have investigated the effects of removal and addition of disulfide cross-links, protein flexibility in the vicinity of a cross-link, and disulfide loop size on the stability of Cucurbita maxima trypsin inhibitor-V (CMTI-V; 7 kD) by differential scanning calorimetry. CMTI-V offers the advantage of a large, flexible, and solvent-exposed loop not involved in extensive intra-molecular interactions. We have uncovered a negative correlation between retention time in hydrophobic column chromatography, a measure of protein hydrophobicity, and melting temperature (T(m)), an indicator of native state stabilization, for CMTI-V and its variants. In conjunction with the complete set of thermodynamic parameters of denaturation, this has led to the following deductions: (1) In the less stable, disulfide-removed C3S/C48S (Delta Delta G(d)(50 degrees C) = -4 kcal/mole; Delta T(m) = -22 degrees C), the native state is destabilized more than the denatured state; this also applies to the less-stable CMTI-V* (Delta Delta G(d)(50 degrees C) = -3 kcal/mole; Delta T(m) = -11 degrees C), in which the disulfide-containing loop is opened by specific hydrolysis of the Lys(44)-Asp(45) peptide bond; (2) In the less stable, disulfide-inserted E38C/W54C (Delta Delta G(d)(50 degrees C) = -1 kcal/mole; Delta T(m) = +2 degrees C), the denatured state is more stabilized than the native state; and (3) In the more stable, disulfide-engineered V42C/R52C (Delta Delta G(d)(50 degrees C) = +1 kcal/mole; Delta T(m) = +17 degrees C), the native state is more stabilized than the denatured state. These results show that a cross-link stabilizes both native and denatured states, and differential stabilization of the two states causes either loss or gain in protein stability. Removal of hydrogen bonds in the same flexible region of CMTI-V resulted in less destabilization despite larger changes in the enthalpy and entropy of denaturation. The effect of a cross-link on the denatured state of CMTI-V was estimated directly by means of a four-state thermodynamic cycle consisting of native and denatured states of CMTI-V and CMTI-V*. Overall, the results show that an enthalpy-entropy compensation accompanies disulfide bond effects and protein stabilization is profoundly modulated by altered hydrophobicity of both native and denatured states, altered flexibility near the cross-link, and residual structure in the denatured state.     

Electron paramagnetic resonance studies of the tungsten-containing formate dehydrogenase from Clostridium thermoaceticum

The redox centers in the tungsten-containing formate dehydrogenase from Clostridium thermoaceticum were examined by potentiometric titration and electron paramagnetic resonance spectroscopy. At low temperature two overlapping iron-sulfur signals which correlated with enzymatic activity were observed with formal potentials near -400 mV vs. SHE. Based on their temperature dependences, one signal is assigned to a reduced Fe2S2 cluster and one to a reduced Fe4S4 cluster. Quantitation of signal intensity suggests two Fe2S2 and two Fe4S4 clusters per formate dehydrogenase molecule. Another signal (g = 2.101, 1.980, 1.950) present in low concentrations at more negative potentials was observable up to 200 degrees K and is not attributed to any iron-sulfur cluster. The possible origin of this signal is analyzed using ligand field theory, and the redox behavior is considered with respect to possible ligation at the active site.     

Infrared spectroscopic discrimination between the loop and alpha-helices and determination of the loop diffusion kinetics by temperature-jump time-resolved infrared spectroscopy for cytochrome c

The infrared (IR) absorption of the amide I band for the loop structure may overlap with that of the alpha-helices, which can lead to the misassignment of the protein secondary structures. A resolution-enhanced Fourier transform infrared (FTIR) spectroscopic method and temperature-jump (T-jump) time-resolved IR absorbance difference spectra were used to identify one specific loop absorption from the helical IR absorption bands of horse heart cytochrome c in D2O at a pD around 7.0. This small loop consists of residues 70-85 with Met-80 binding to the heme Fe(III). The FTIR spectra in amide I' region indicate that the loop and the helical absorption bands overlap at 1653 cm(-1) at room temperature. Thermal titration of the amide I' intensity at 1653 cm(-1) reveals that a transition in loop structural change occurs at lower temperature (Tm=45 degrees C), well before the global unfolding of the secondary structure (Tm approximately 82 degrees C). This loop structural change is assigned as being triggered by the Met-80 deligation from the heme Fe(III). T-jump time-resolved IR absorbance difference spectra reveal that a T-jump from 25 degrees C to 35 degrees C breaks the Fe-S bond between the Met-80 and the iron reversibly, which leads to a loop (1653 cm(-1), overlap with the helical absorption) to random coil (1645 cm(-1)) transition. The observed unfolding rate constant interpreted as the intrachain diffusion rate for this 16 residue loop was approximately 3.6x10(6) s(-1).     

Reactivity pathways for nitric oxide and nitrosonium with iron complexes in biologically relevant sulfur coordination spheres

The interaction of nitric oxide (NO) with iron-sulfur cluster proteins results in the formation of dinitrosyl iron complexes (DNICs) coordinated by cysteine residues from the peptide backbone or with low molecular weight sulfur-containing molecules like glutathione. Such DNICs are among the modes available in biology to store, transport, and deliver NO to its relevant targets. In order to elucidate the fundamental chemistry underlying the formation of DNICs and to characterize possible intermediates in the process, we have investigated the interaction of NO (g) and NO(+) with iron-sulfur complexes having the formula [Fe(SR)(4)](2-), where R=(t)Bu, Ph, or benzyl, chosen to mimic sulfur-rich iron sites in biology. The reaction of NO (g) with [Fe(S(t)Bu)(4)](2-) or [Fe(SBz)(4)](2-) cleanly affords the mononitrosyl complexes (MNICs), [Fe(S(t)Bu)(3)(NO)](-) (1) and [Fe(SBz)(3)(NO)](-) (3), respectively, by ligand displacement. Mononitrosyl species of this kind were previously unknown. These complexes further react with NO (g) to generate the corresponding DNICs, [Fe(SPh)(2)(NO)(2)](-) (4) and [Fe(SBz)(2)(NO)(2)](-) (5), with concomitant reductive elimination of the coordinated thiolate donors. Reaction of [Fe(SR)(4)](2-) complexes with NO(+) proceeds by a different pathway to yield the corresponding dinitrosyl S-bridged Roussin red ester complexes, [Fe(2)(mu-S(t)Bu)(2)(NO)(4)] (2), [Fe(2)(mu-SPh)(2)(NO)(4)] (7) and [Fe(2)(mu-SBz)(2)(NO)(4)] (8). The NO/NO(+) reactivity of an Fe(II) complex with a mixed nitrogen/sulfur coordination sphere was also investigated. The DNIC and red ester species, [Fe(S-o-NH(2)C(6)H(4))(2)(NO)(2)](-) (6) and [Fe(2)(mu-S-o-NH(2)C(6)H(4))(2)(NO)(4)] (9), were generated. The structures of 8 and 9 were verified by X-ray crystallography. The MNIC complex 1 can efficiently deliver NO to iron-porphyrin complexes like [Fe(TPP)Cl], a reaction that is aided by light. Removal of the coordinated NO ligand of 1 by photolysis and addition of elemental sulfur generates higher nuclearity Fe/S clusters.