Studies on silk fibroin of the silkworm Bombyx mori

A procedure has been developed to obtain native fibroin in a pure state from the reservoir part of the silk gland. The purified protein has a sedimentation coefficient of 10 S as determined on sucrose density gradients and the amino acid composition is similar to that reported for fibroin from the cocoons. The effects of various solvents has been studied; lithium thiocyanate was found to be the solvent of choice. By in vivo labeling of fibroin with [³H]glycine and [¹⁴C]alanine it was demonstrated that fibroin synthesized in the posterior part of the gland and that stored in the reservoir part are identical.     

Fractionation of the chymotryptic precipitate of Bombyx mori silk fibroin

1. A solution of Bombyx mori silk fibroin was digested with chymotrypsin. Amino acid analyses of the chymotryptic precipitate showed in addition to the main constituents Gly, Ala, Ser and Tyr, very small amounts of Lys, His, Arg, Asp, Thr, Glu, Pro, Cys, Val, Met, Ile, Leu, Phe and Trp. 2. A stable solution of the chymotryptic precipitate in 6m-urea was obtained by dialysing a solution in 50% (w/v) lithium thiocyanate against 6m-urea. 3. The dinitrophenylated chymotryptic precipitate in 6m-urea was fractionated by gel filtration and by ion-exchange chromatography. On Dowex 1 (X2), a main fraction I_d and three further fractions with different amino acid compositions and molecular weights were obtained. 4. Specific rearrangement and fission of the bonds involving the serine nitrogen atoms of fraction I_d and fractionation of the resulting mixture by gel filtration yielded five fractions. Two of these fractions had the compositions DNP-Ser-(Gly₆,Ala₄,Ser) and DNP-Ser-(Gly₄,Ala₂ or Ala₃,Ser) and are presumably double repeating units according to the proposed formula of Lucas, Shaw & Smith (1957), namely [Ser-Gly-(Ala-Gly)_n]₂, for n values of 2 and 1 respectively.     

Localization of the genes for silk fibroin in silk gland cells of Bombyx mori.

Radioactive iodinated silk fibroin messenger RNA and ribosomal RNA have been used as probes to localize their genes in tissue sections of Bombyx mori by in situ hybridization. From filter hybridization experiments it is inferred that the majority of the grains produced by in situ hybridization with fibroin mRNA represents specific hybridization to fibroin genes. Sections of the posterior silk gland where silk is synthesized have been compared with those of the middle gland which does not synthesize fibroin. Glands have been analyzed from the second through the fifth (last) larval instar during feeding and moulting periods. During later stages when the gland cells increase their DNA content by polyploidization, serial sections were required to follow the distribution of grains through entire nuclei. At all stages, both ribosomal DNA and fibroin genes are distributed randomly throughout the nuclei without a preferred relationship to any nuclear structure.     

Proteomic studies of isoforms of the P25 component of Bombyx mori fibroin

It is recognized that P25 is one of three polypeptide components of the fibroin synthesized in the larval silk gland (SG) of silkworm, having two glycosylated isoforms. In the present study, however, eight P25 isoforms were separated by proteomics, including two-dimensional gel electrophoresis of whole SG proteins, and were identified by the peptide mass fingerprinting method. Four of the eight isoforms were identified as Bombyx mandarina P25s, although the SG of Bombyx mori has never been considered to contain the P25 from B. mandarina. It is suggested that this diversity of P25 isoforms depends on phosphorylation modification in addition to glycosylation.     

Ultrastructure of fibroin in the silk gland of larval Bombyx mori

The fibroin molecules stored in Golgi vacuoles in the posterior silk gland cells of 72-h-old, fifth instar larvae of Bombyx mori L. were observed electron-microscopically. The fibers which float in the Golgi vacuoles often have their ends attached to the limiting membrane. The fibers are helical bundles about 130 Å in diameter composed of 5–7 threads, each 20–30 Å thick.     

The chemical structure and the crystalline structures of Bombyx mori silk fibroin.

Some recent data (i.e. published in the last ten years) on the chemical and crystalline structures of B. mori silk are reviewed. The main emphasis is put on the crystallizable portion of silk fibroin, including its chemical constitution and its molecular conformation (at the crystallographic unit-cell level) in the two crystalline modifications : the beta pleated sheet and the silk I structures. The structural aspects are based on a discussion of X-ray and electron diffraction data, and on conformational energy analyses of a model (Ala-Gly)n polypeptide of silk fibroin.     

The biosynthesis of fibroin. I. The intracellular form of silk fibroin of Bombyx mori L

After in vivo labeling with [³H]glycine the synthesis and transport of fibroin has been studied by radioautography and cell fractionation.Radioactivity appearing in the cytoplasm is rapidly transferred to the lumen where it accumulates in the so-called silk layer before reaching the central core of secreted fibroin. By sucrose density gradients it was demonstrated that the radioactivity appears immediately in the fibroin fraction, no precursors being observed.A simple fractionation procedure, based on the utilization of detergent, gives three fractions tentatively interpreted as synthesis, transport, and accumulation compartments in accordance with their kinetics of labeling.     

Biomaterial films of Bombyx mori silk fibroin with poly(ethylene oxide)

Phase separation into controllable patterned microstructures was observed for Bombyx mori silkworm silk and poly(ethylene oxide) (PEO) (900000 g/mol) blends cast from solution. The evolution of the microstructures with increasing PEO volume fraction is strikingly similar to the progression of phases and microstructures observed with surfactants. The chemically patterned materials obtained provide engineerable biomaterial surfaces with predictable microscale features which can be used to create topographically patterned or chemically functionalized biomaterials. Solution blending was used to incorporate water-soluble PEO into silk to enhance elasticity and hydrophilicity. The sizes of the globule fibroin phase ranged from 2.1 +/- 0.5 to 18.2 +/- 2.1 microm depending on the ratio of silk/PEO. Optical microscopy and SEM analysis confirmed the micro-phase separation between PEO and silk. Surface properties were determined by XPS and contact angle. Methanol can be used to control the conformational transition of silk fibroin to the insoluble beta-sheet state. Subsequentially, the PEO can be easily extracted from the films with water to generate silk matrixes with definable porosity and enhanced surface roughness. These blend films formed from two biocompatible polymers provide potential new biomaterials for tissue engineering scaffolds.     

In vitro production of Bombyx mori silk fibroin by organ culture of the posterior silk glands; isotope labeling and fluorination of the silk fibroin

An in vitro silk fibroin production system has been developed by culture of posterior silk glands from Bombyx mori. A large amount of the silk fibroin was produced continuously and effectively with a rotation culture procedure. Modified Grace's insect medium was used, and oxygen bubbling in the medium was performed. In addition, half of the medium was replaced with fresh medium every 6 h. The production yield of silk fibroin produced after 100 h culture was 81 mg/g wet weight of posterior silk gland. This culture system was used successfully for efficient (15)N isotope labeling of silk fibroin, which is required for (15)N solid state nuclear magnetic resonance (NMR) analysis of silk fibroin. Moreover, the introduction of fluorinated amino acids into silk fibroin was also carried out using this culture system. (c) 1993 John Wiley & Sons, Inc.     

Isolation and identification of the messenger RNA for silk fibroin from Bombyx mori

The messenger RNA for the protein silk fibroin has been isolated from the posterior silk gland of Bombyx mori and identified by partial sequence analysis. The sequence of mRNA could be predicted because the protein has a simple repetitious primary structure in which glycine residues comprise 45% of all residues and alternate predominantly with alanine and serine.     

家蚕丝素P25蛋白基因启动子顺式作用元件的功能分析

为了阐明蚕丝蛋白基因表达调控的分子机制, 利用Bac-to-Bac杆状病毒表达系统及实时荧光定量PCR等技术, 对家蚕Bombyx mori丝素P25基因启动子上游1 233 bp的活性及其调控元件的功能进行了分析。结果表明： 在P25启动子上游-423~-1 233区和-127~-238区存在正调控元件, 在-238~-423区段存在负调控元件; PSGF和BMFA两结合元件在P25基因表达中起负调控作用。PSGF结合元件对A3启动子在后部丝腺的活性具有一定的增强作用, 进一步验证了PSGF调控元件的功能。通过对P25基因启动子的活性分析, 尤其是对PSGF和BMFA调控元件的功能分析, 有利于进一步了解P25基因表达调控的精细机制。     

Conformation transition kinetics of regenerated Bombyx mori silk fibroin membrane monitored by time-resolved FTIR spectroscopy

The ethanol-induced conformation transition of regenerated Bombyx mori silk fibroin membrane from a poorly defined to the well ordered state was monitored by time-resolved Fourier transform infrared spectroscopy (FTIR) for the first time. From the analysis of FTIR difference spectra, taken on time scales as short as 6 s and up to 1 h after addition of ethanol, intensity vs. time plots of an increasing band at 1618 cm(-1) were observed indicating formation of a beta-sheet coincident with the loss of intensity of a band at 1668 cm(-1) indicating decreases of random coil and/or silk I structure. Both infrared markers were fitted with identical biphasic exponential decay functions, however, there was a clear burst phase occurring prior to the onset of the observed transitions. The conformation transition process is indicated to either proceed sequentially through (at least) two intermediate states that contain different levels of beta-sheet structure or to have parallel pathways of initial beta-sheet formation followed by a slower 'perfection' phase. The first observed process forms in a burst phase a few seconds after mixing (or even faster), prior to the collection of the first spectrum at 6 s. The second observed process occurs with a time constant of approximately 0.5 min, the intermediate present at this stage then continues with a time constant of 5.5 min completing the observed formation of the beta-sheet. The conformation transition of this slower intermediate is not only indicated by an analysis of the kinetics of the random coil and beta-sheet-specific bands discussed above, it roughly coincides with the appearance of an additional infrared marker at 1695 cm(-1), which may be a marker for beta-sheet structure specific to the formation of the perfected structure. The conformation transition of this protein analyzed by infrared spectroscopy provides insight into a part of the fascinating process of cocoon formation in B. mori.     

Swelling and dissolution of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide.

Bombyx mori silk fibers were dissolved in N-methyl morpholine N-oxide (MMNO), an organic cyclic amine oxide used for the solvent spinning of regenerated cellulosic fibers. The commercial MMNO monohydrate used in this study as a solvent for silk is a hygroscopic compound crystalline at room temperature, which becomes an active solvent after melting at 76 degrees C. The degree of hydration of MMNO was checked by DSC measurements. The solvation power of MMNO towards silk fibroin drastically decreased at a water content > or = 20-21% w/w. Dissolution of silk required both thermal and mechanical energy. The optimum temperature was 100 degrees C. At lower temperatures dissolution proceeded very slowly. At higher temperatures, rapid depolymerization of silk fibroin occurred. The value of the Flory-Huggins interaction parameter chi for the MMNO-H2O-silk fibroin system was -8.5, suggesting that dissolution is a thermodynamically favored process. The extent of degradation of silk fibroin was assessed by measuring the intrinsic viscosity and determining the amino acid composition of silk after regeneration with an aqueous methanol solution, which was effective in removing the solvent and coagulating silk. Regenerated silk fibroin membranes were characterized by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The prevailing molecular conformation of silk fibroin chains was the beta-sheet structure, as shown by the intense amide I-III bands at 1704, 1627, 1515, 1260, and 1230 cm(-1). The value of the I1260/I1230 intensity ratio (crystallinity index) was 0.68, comparable to that of the fibers. The DSC thermogram was characteristic of a silk fibroin material with unoriented beta-sheet crystalline structure, with an intense decomposition endotherm at 294 degrees C. The SEM examination of fractured surfaces showed the presence of a dense microstructure with a very fine texture formed by densely packed roundish particles of about 100-200 nm diameter.     

Optical spectroscopy to investigate the structure of regenerated Bombyx mori silk fibroin in solution

Fluorescence and circular dichroism spectroscopy were used to monitor the conformational transition of regenerated Bombyx mori silk fibroin (RSF) in aqueous solutions under different conditions. According to the analysis of fluorescence spectra using anilinonaphthalene-8-sulfonic acid magnesium salt (ANS) as an external probe, the destruction of the hydrophobic core prior to the secondary structure change suggests that this collapse may initiate the conformational transition from random coil to beta-sheet for RSF. The temperature dependence of the structural changes of RSF, detected by both fluorescence spectroscopy and circular dichroism, shows a reversible process upon heating and recooling, with the midpoint around 45 degrees C. The results also indicate that most of the tryptophan (Trp) residues contained in silk fibroin are concentrated on the surface of the unfolded protein. However, they will change their location in the highly ordered structure (e.g., becoming more homogeneous) with the conformational transition of silk fibroin. Moreover, our studies also suggest that the presence of water plays a crucial role during the structure changes of fibroin.     

Predominant synthesis of fibroin heavy and light chains on the membrane-bound polysomes prepared from the posterior silk gland of the silkworm, Bombyx mori

Membrane-bound polysomes were prepared from the posterior silk gland of the silkworm, Bombyx mori, on the fourth to fifth day in the fifth larval instar. The polysomes, when supplemented with a soluble fraction from the posterior silk gland, exhibited the elongation reaction of the growing polypeptide-chains, but the initiation reaction of polypeptide synthesis was not demonstrated in this system. The predominant products synthesized on the membrane-bound polysomes were fibroin heavy chain (H-chain) and light chain (L-chain), while polypeptides of heterogeneous size classes were synthesized on the 105,000 X g-sedimentable polysomes. A substantial fraction of the fibroin L-chain synthesized was bound to the H-chain by disulfide bond. Most of the newly synthesized fibroin H- and L-chains on the membrane-bound polysomes were proved to be present within microsomal membrane vesicles because of their insensitivity to digestion with proteases in the absence of Triton X-100.     

Determination of the multiplicity of the silk fibroin gene and detection of fibroin gene-related DNA in the genome of Bombyx mori.

The number of silk fibroin genes per genome in the silkworm Bombyx mori has been determined by hybridization using fibroin [¹²⁵I]mRNA. The purified [¹²⁵I]mRNA had an oligonucleotide pattern after RNAase T₁ digestion which was characteristic of fibroin mRNA (Suzuki &; Brown, 1972) and it hybridized specifically to DNA with a G + C content expected for a fibroin gene. Thermal denaturations indicated that these hybrids were mismatched by about 3%, which probably indicates some variation among the sequences encoding the internal repetitions of the fibroin protein.The concentration of fibroin gene sequences in B. mori DNA was measured by saturation hybridization of [¹²⁵I]mRNA to filter bound DNA. The same saturation level of 1.8 × 10^?5 μg mRNA per μg DNA was calculated from data obtained with unfractionated DNA and with fibroin gene sequences which had been separated from bulk B. mori DNA by actinomycin $\text{D}\text{CsCl}$ centrifugation. Scatchard plots of the subsaturation data extrapolated to an identical saturation value. Internal reiteration of the fibroin mRNA molecule was apparent from the high association constant of hybridization. An exhaustive hybridization experiment showed that such repetitions comprise at least 90% of each mRNA molecule. The saturation value, in conjunction with the genome DNA content and the mRNA size, indicated the presence of only one fibroin gene per haploid B. mori genome.Hybridization of actinomycin $\text{D}\text{CsCl}$ fractionated DNA indicated that fibroin mRNA can form hybrids with DNA that bands with bulk B. mori DNA. These hybrids appear to involve DNA which is related to, but distinguishable from, true fibroin gene sequences. The fibroin gene-related sequences form mismatched hybrids with the mRNA, are much shorter than the fibroin gene and are dispersed in B. mori DNA of much lower G + C content, and there are many copies of these sequences per B. mori genome.