Modification of the plasmid initiator protein RepC active site during replication

Abstract pT181 is a Staphylococcus aureus rolling circle replicating plasmid whose copy number is controlled by regulating the synthesis and activity of the initiator protein, RepC. The RepC dimer is modified during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. To purify RepC*, RepC was expressed in S. aureus as a fusion protein with a polyhistidine tail. The histidine-tagged RepC retains its initiation and topoisomerase activities in vitro. Histagged RepC/RepC and RepC/RepC* were purified in a two-step procedure. Peptide mapping, mass spectrometric analysis and protein sequencing of purified RepC and RepC* were carried out, and both proteins appeared identical, except that the peptide containing the RepC active site tyrosine used in nicking activity was absent when the purified RepC* sample was analyzed. The absence of the active site in RepC* suggests that this site was modified during replication. The results provide the first direct biochemical evidence that RepC* is a modified form of RepC, and support a model in which RepC replication of pT181 leaves RepC with an oligonucleotide blocking the active site of one of its subunits.     

Specificity of RepC protein in plasmid pT181 DNA replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 DNA replication specifically requires the plasmid-encoded initiator protein, RepC. The initiator protein binds specifically to a 32-base pair sequence within the pT181 origin of replication. RepC protein also has a nicking-closing activity that is specific for the pT181 origin. Replication of pT181 initiates by covalent extension of the nick and proceeds by a rolling circle mechanism. Two other small, multicopy plasmids pC221 and pS194 belong to the pT181 family and have common structural organization and replication properties. The replication proteins and replication origins of these plasmids have extensive sequence homologies, although they belong to different incompatibility groups. In spite of this homology, the replication proteins and replication origins of these three plasmids do not show any cross-reactivity in vivo. We have carried out a series of in vitro experiments to determine the specificity of pT181-encoded initiator protein, RepC. DNA binding experiments showed that although the binding of RepC to the pT181 origin was very efficient, little or no binding was seen with pC221 and pS194 origins. The nicking-closing activity of RepC was found to be equally efficient with the pC221 and pS194 plasmids. The plasmids pC221 and pS194 replicated efficiently in a RepC-dependent in vitro system. However, replication of these plasmids was greatly reduced in the presence of a competing pT181 origin. The results presented here suggest that nicking-closing by RepC at the origin is not sufficient for maximal replication and that tight binding of RepC to the origin plays an important role in the initiation of DNA replication.     

Sequence diversity of the plasmid replication gene repC in the Rhizobiaceae

The repABC operon is essential for stable maintenance of some Rhizobiaceae plasmids and of pTAV320 from Paracoccus versutus. These plasmids are the largest described family of homologous, yet compatible replicons. The repC gene is essential for plasmid replication, and previous work identified four distinct sequence groups (repC1, repC2, repC3, and repC4) that appear to define different compatibility classes. Probes for these different groups were used to characterize plasmids in Rhizobium leguminosarum population studies and three new repC sequence groups, repC5, repC6, and repC7 were identified. The general repC primers were modified to amplify a wider range of repC sequences and repC sequences were identified in Sinorhizobium and Mesorhizobium type strains. We also showed that the repC3 group-specific primers described previously do not amplify all repC3 sequences and developed a new repC3 amplification strategy.     

Purification of pT181-encoded repC protein required for the initiation of plasmid replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 replication specifically requires the plasmid-encoded repC protein. An in vitro system has been shown to carry out semiconservative replication of pT181 and its derivative plasmids (Khan, S A., Carleton, S. M., and Novick, R. P. (1981) Proc. Natl. Acad. Sci. U. S. A. 78, 4902-4906). We have used this replication assay to isolate repC protein, which was purified to near homogeneity. The repC gene was cloned into the pKJB825 plasmid that contains the phage lambda temperature-sensitive repressor gene, cI857, and the rightward promoter, PR. Upon temperature induction, Escherichia coli clones containing the recombinant plasmid overproduced repC protein, which was purified in significant quantities. The molecular weight of repC protein under denaturing conditions is 38,000, which is consistent with the size predicted from the DNA sequence data. Presence of repC protein was absolutely essential for the initiation of replication of pT181 and its derivatives in vitro.     

HU protein binding to the replication origin of the rolling-circle plasmid pKYM enhances DNA replication

The RepK protein, which is encoded by the rolling-circle plasmid pKYM, binds to the PR I site in the pKYM DNA replication origin. We have identified HU as a protein that binds to the PR II and PR III sites in the replication-enhancing region which is downstream of PR I. DNA footprinting assays show that HU binds to these two sites only when RepK is bound to PR I, and that HU also enhances the binding of RepK to PR I. In vivo, pKYM was unable to transform an HU null strain. Two mutant RepK proteins, RepKW179Y, which contains a Trp-to-Tyr exchange at position 179, and RepKD277L, which contains an Asp-to-Leu mutation at residue 277, initiate DNA replication in vivo in the absence of HU. In vitro, these mutant RepK proteins form more stable complexes with the pKYM origin region than does the wild-type RepK protein. These results indicate that HU plays a role in the formation of a stable RepK-origin complex, which is required for the initiation of pKYM DNA replication. Received: 24 July 1996 / Accepted: 30 December 1996     

TraJ protein of plasmid RP4 binds to a 19-base pair invert sequence repetition within the transfer origin

Transfer of plasmid RP4 during bacterial conjugation requires the plasmid-encoded TraJ protein, which binds to the transfer origin (Fürste, J. P., Pansegrau, W., Ziegelin, G., Kr?ger, M., and Lanka, E. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 1771-1775). As indicated by traJ mutants, the TraJ protein is a constituent of the relaxosome, the initiation complex of transfer DNA replication. The traJ gene maps adjacent to the transfer origin (oriT). The structural gene consists of a 372-base pair sequence encoding a polypeptide of 122 amino acids (13,282 Da). TraJ was purified from an Escherichia coli strain overproducing the protein. DNA footprinting experiments involving DNase I demonstrated that the purified protein binds to the right arm of a 19-base pair inverted repeat within oriT. Hydroxyl radical footprints of the DNA-protein complex revealed that TraJ protein is bound to only one side of the DNA helix.     

Mannopinic acid and agropinic acid catabolism region of the octopine-type Ti plasmid pTi15955

Octopine-type Ti plasmids such as pTi15955, pTiA6 and pTiR10 direct the catabolism of at least eight compounds called opines that are released from crown gall tumours. Four of these compounds are denoted mannityl opines, each of which possesses a D -mannityl substituent on the nitrogen atom of either glutamate or glutamine. We have analysed a 20 kb region of the Ti plasmid pTi15955 that is required for the catabolism of two such opines, mannopinic acid and agropinic acid. A total of 12 genes in four operons were identified by DNA sequence analysis. Transposons Tn 5lacZ and MudK were used to mutagenize these genes and to create aga–lacZ and moa–lacZ translational fusions. The expression of all fusions was induced by agropinic acid and by mannopinic acid. One of these four operons encodes an agropinic acid permease, whereas a second one encodes a mannopinic acid permease. A third operon contains three genes encoding probable catabolic enzymes, two of which (AgaF and AgaG) are thought to convert agropinic acid to mannopinic acid, while the third (AgaE) probably converts mannopinic acid to mannose and glutamate. AgaE resembles a bacterial amino acid deaminase, whereas AgaF and AgaG resemble two bacterial proteins that together catabolize substituted hydantoins, whose chemical structure resembles that of agropinic acid. The remaining operon encoded the MoaR protein, a negative regulator of itself and of the other three operons.     

The origin binding protein of herpes simplex virus 1 binds cooperatively to the viral origin of replication oris

The origin binding protein (OBP) or herpes simplex virus 1 has been expressed in Escherichia coli and used to study the role of multiple OBP binding sites in the herpes simplex virus #1 origin of replication, oris. Our results showed that the sequence CGTTCGCACTT was required for the binding of OBP to duplex DNA with high affinity. The minimal oris contains three repeats of this sequence or close derivatives thereof. Filter binding experiments have demonstrated that specific binding occurs to two of these repeats, box I and box II. An investigation using the DNase I footprinting technique revealed that the binding of OBP to box I and box II was cooperative and led to the formation of a highly organized complex in which the entire oris sequence was induced. We observed furthermore that the AT-rich sequence of the oris dyad was readily accessible to macromolecules even in the OBP.oris complex. The DNase I cleavage pattern of this sequence was, however, altered radically, indicating that a significant conformational change had occurred. A tentative structural model for the OBP-oris interaction is discussed on the basis of these observations.     

Interactions between the RepB initiator protein of plasmid pMV158 and two distant DNA regions within the origin of replication

Plasmids replicating by the rolling circle mode usually possess a single site for binding of the initiator protein at the origin of replication. The origin of pMV158 is different in that it possesses two distant binding regions for the initiator RepB. One region was located close to the site where RepB introduces the replication-initiating nick, within the nic locus; the other, the bind locus, is 84bp downstream from the nick site. Binding of RepB to the bind locus was of higher affinity and stability than to the nic locus. Contacts of RepB with the bind and nic loci were determined through high-resolution footprinting. Upon binding of RepB, the DNA of the bind locus follows a winding path in its contact with the protein, resulting in local distortion and bending of the double-helix. On supercoiled DNA, simultaneous interaction of RepB with both loci favoured extrusion of the hairpin structure harbouring the nick site while causing a strong DNA distortion around the bind locus. This suggests interplay between the two RepB binding sites, which could facilitate loading of the initiator protein to the nic locus and the acquisition of the appropriate configuration of the supercoiled DNA substrate.     

In vitro inhibitory activity of RepC/C*, the inactivated form of the pT181 plasmid initiation protein, RepC.

pT181 is a Staphylococcus aureus rolling circle plasmid that regulates its replication by controlling the synthesis of its dimeric initiator protein RepC/C and by inactivating the protein following its use in replication (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). This inactivation consists of the addition of an oligonucleotide, representing several nucleotides immediately 3' to the initiation nick site, to the active site tyrosine of one of the two subunits, generating a heterodimer, RepC/C*. Previous results suggested that the inactive form was metabolically stable and was present at a much higher level than the active form (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). In the present study we have measured total RepC antigen as a function of plasmid copy number and have analyzed the interaction of the two forms. We find that pT181-containing staphylococci contain approximately one RepC dimer per plasmid copy over a 50-fold range of copy numbers. This is consistent with previous measurements of the rate of RepC synthesis, which suggested that one RepC dimer is synthesized per replication event (J. Bargonetti, P.-Z. Wang and R. P. Novick, EMBO J. 12:3659-3667, 1993). The RepC/C* heterodimer, which is inactive for replication, is a competitive inhibitor of the replication and the topoisomerase-like and cruciform-enhancing activities of the native protein. These results suggest that the inactive form may have a specific regulatory role in vivo. Since the known plasmid-determined controls, which maintain a constant plasmid copy number, are designed to ensure the synthesis of one RepC/C dimer per plasmid replication event, it is difficult to envision any role for yet another negative regulator of replication. Conceivably, under conditions where the initiator is overproduced, such as in the absence of the normal antisense regulation of initiator production, RepC/C* could serve as a fail-safe means of preventing autocatalytic replication.     

The dnaA initiator protein binds separate domains in the replication origin of Escherichia coli

After binding to its four 9-mer boxes in the 245-base pair Escherichia coli replication origin (oriC), dnaA protein effects the formation of an "open complex" in an adjacent region made up of three 13-mers (Bramhill, D., and Kornberg, A. (1988) Cell 52, 743-755). This open complex formation requires the ATP form of dnaA protein assisted by HU protein (Sekimizu, K., Bramhill, D., and Kornberg, A. (1987) Cell 50, 259-265). We now provide direct evidence that dnaA protein binds the 13-mers, sequences that bear no resemblance to the 9-mer box. The evidence is (i) displacement of dnaA protein from the open complex by oriC or by a synthetic oligonucleotide containing the 13-mers, but not by a mutant of oriC lacking the 13-mers; (ii) filter binding of the synthetic (13-mer) oligonucleotide by dnaA protein; and (iii) requirement for the ATP form of dnaA protein assisted by HU protein for temperature-dependent binding to the 13-mer region. Controlled proteolysis of dnaA protein results in a prompt loss of oriC binding; an NH2-terminal 30-kDa peptide contains the domain that binds ATP and phospholipids known to destabilize the tightly bound ATP.     

The conjugal transfer system of Agrobacterium tumefaciens octopine-type Ti plasmids is closely related to the transfer system of an IncP plasmid and distantly related to Ti plasmid vir genes.

We have determined the DNA sequences of two unlinked regions of octopine-type Ti plasmids that contain genes required for conjugal transfer. Both regions previously were shown to contain sequences that hybridize with tra genes of the nopaline-type Ti plasmid pTiC58. One gene cluster (designated tra) contains a functional oriT site and is probably required for conjugal DNA processing, while the other gene cluster (designated trb) probably directs the synthesis of a conjugal pilus and mating pore. Most predicted Tra and Trb proteins show relatively strong sequence similarity (30 to 50% identity) to the Tra and Trb proteins of the broad-host-range IncP plasmid RP4 and show significantly weaker sequence similarity to Vir proteins found elsewhere on the Ti plasmid. An exception is found in the Ti plasmid TraA protein, which is predicted to be a bifunctional nickase-helicase that has no counterpart in IncP plasmids or among Vir proteins but has homologs in at least six other self-transmissible and mobilizable plasmids. We conclude that this Ti plasmid tra system evolved by acquiring genes from two or three different sources. A similar analysis of the Ti plasmid vir region indicates that it also evolved by appropriating genes from at least two conjugal transfer systems. The widely studied plasmid pTiA6NC previously was found to be nonconjugal and to have a 12.65-kb deletion of DNA relative to other octopine-type Ti plasmids. We show that this deletion removes the promoter-distal gene of the trb region and probably accounts for the inability of this plasmid to conjugate.     

Purified bacteriophage lambda O protein binds to four repeating sequences at the lambda replication origin.

The bacteriophage lambda O protein is needed for initiation of lambda DNA replication. Several lines of evidence suggest that initiation requires that this protein interacts with a specific sequence called ori (for origin) in lambda DNA. We have purified this protein to near homogeneity and studied the protection against nuclease cleavage of the origin DNA sequences. Our data demonstrate that the O protein binds within an interval of about 95 base pairs (bp), which contains four tandemly arranged 19bp repeating sequences, ATCCCTCAAAACGA (G)GG GAT(A). At a low concentration of O protein, the inner two repeats are primarily covered, while binding to the outer two repeats requires a high concentration of O protein. From the molecular size of O protein (32,000 daltons), and the internal symmetry in each 19bp repeat, we inferred that the O protein may bind in dimeric form, and that the 95bp region may be filled only when four such dimers have bound. This interaction is discussed in connection with the "activation" of the ori by O protein leading to initiation of DNA synthesis.     

The integration host factor of Escherichia coli binds to bent DNA at the origin of replication of the plasmid pSC101

The integration host factor (IHF) of Escherichia coli is necessary for maintenance of pSC101. The protein binds specifically to the replication origin of the plasmid, in the AT-rich region located immediately adjacent to the left, weak binding site for the plasmid-encoded initiator protein. DNAase I and OH- radical footprinting experiments showed that IHF protects 49 bp of the DNA at the origin region. Methylation protection analyses revealed that IHF contacts purine residues in both the major and minor grooves of the DNA. Electrophoretic analyses showed that IHF binds to bent DNA, and the protein binding further enhances the degree of DNA bending. Site-directed mutagenesis of three of the contact points not only abolished binding of the protein to the DNA but also inactivated the replication origin. Therefore, binding of IHF to the ori sequence most probably is necessary for initiation of plasmid replication.     

Localization and characterization of the region encoding catabolism of mannopinic acid from the octopine-type Ti plasmid pTi15955

The region of the octopine-type tumor-inducing (Ti) plasmid pTi15955 encoding catabolism of mannopinic acid was localized to an 18-kilobase (kb) segment mapping between Ti plasmid coordinates 70 and 88. A subclone containing only this region normally did not allow utilization of any other mannityl opine. However, spontaneous mutants of the plasmid were isolated that conferred catabolism of agropinic acid. While the mutants remained regulated for mannopinic acid utilization, induction by this opine resulted in increased activity associated with agropinic acid catabolism. Respirometric studies and results from growth assays on mannopinic acid analogues indicated that the genes encoded on the 18-kb subclone were regulated in a wild-type fashion. By means of these analogues, spontaneous constitutive mutants were isolated. In several cases, the mutant phenotype was associated with an insertion event mapping within a 300-base pair region of the subclone insert. Although constitutive for catabolism of mannopinic acid, these mutants remained unable to catabolize any of the other mannityl opines. Segregation studies and genetic reconstitution experiments showed that one of the subclones isolated directly in Agrobacterium was actually composed of two complementing recombinant plasmids contained in the same cell. This indicated that the genes encoding mannopinic acid catabolism were organized into at least two complementation groups. These results point to a high degree of complexity in the organization and regulation of Ti plasmid genes encoding catabolism of a relatively simple carbon source.     

The PcrA3 mutant binds DNA and interacts with the RepC initiator protein of plasmid pT181 but is defective in its DNA helicase and unwinding activities

Plasmid rolling-circle replication initiates by covalent extension of a nick generated at the plasmid double-strand origin (dso) by the initiator protein. The RepC initiator protein binds to the plasmid pT181 dso in a sequence-specific manner and recruits the PcrA helicase through a protein-protein interaction. Subsequently, PcrA unwinds DNA at the nick site followed by replication by DNA polymerase III. The pcrA3 mutant of Staphylococcus aureus has previously been shown to be defective in plasmid pT181 replication. Suppressor mutations in the repC initiator gene have been isolated that allow pT181 replication in the pcrA3 mutant. One such suppressor mutant contains a D57Y change in the RepC protein. To identify the nature of the defect in PcrA3, we have purified this mutant protein and studied its biochemical activities. Our results show that while PcrA3 retains its DNA binding activity, it is defective in its helicase and RepC-dependent pT181 DNA unwinding activities. We have also purified the RepC D57Y mutant and shown that it is similar in its biochemical activities to wild-type RepC. RepC D57Y supported plasmid pT181 replication in cell-free extracts made from wild-type S. aureus but not from the pcrA3 mutant. We also demonstrate that both wild-type RepC and its D57Y mutant are capable of a direct physical interaction with both wild-type PcrA and the PcrA3 mutant. Our results suggest that the inability of PcrA3 to support pT181 replication is unlikely to be due to its inability to interact with RepC. Rather, it is likely that a defect in its helicase activity is responsible for its inability to replicate the pT181 plasmid.     

华癸中生根瘤菌质粒复制基因repC的克隆与鉴定

摘要：【目的】repC为质粒复制必需的起始蛋白基因。本研究旨在对华癸中生根瘤菌菌株HN3015及其质粒消除突变株进行repC基因的克隆和鉴定。【方法】采用通用引物RC1和RC3进行repC基因的PCR扩增,扩增产物克隆到载体pMD-18T,然后测序。利用Southern 杂交对repC基因定位。利用在线软件分析基因的序列特征,BLAST 工具进行同源性搜索;ExPASy推断其氨基酸的序列;ClustalW进行同源核苷酸和氨基酸序列的多重比较分析;PredictProtein 进行蛋白二级结构分析。【结果】