Role of the N-terminal region and of beta-sheet residue Thr29 on the activity of the omega2 global regulator from the broad-host range Streptococcus pyogenes plasmid pSM19035

The dimeric regulatory protein wild-type omega (wt omega2) binds to arrays of 7-bp sequences (heptads) present in the operator DNA region of copy control and partition functions of plasmid pSM19035. Each omega2 protein probably binds with an antiparallel beta-sheet structure in the major groove of the 7-bp subsite of the operator DNA. Exchange of threonine at position 29 to alanine (T29A) drastically affects the activity of variant protein omega2T29A both in vivo and in vitro, and reduces the thermodynamic stability deltaG(o)u, but does not change the conformation. Likewise, the binding affinity to DNA is reduced and the association of the two monomeric subunits of the omega2T29A dimer is weakened, as manifested by an increase in the dissociation constant from 3.2 microM for wt omega2 to 6.3 microM for omega2T29A. Denatured dimers are formed upon thermal unfolding of wt omega2 and omega2T29A at ca. 45 microM (D(n)<-->D(u)). Removal of 8 (omega2deltaN8), or even 18 (omega2deltaN18) N-terminal amino acids has no obvious effect either on the core structure or on the activity in comparison to wt omega2. The stability of variants omega2deltaN8 and omega2deltaN18 is similar to that of wt omega2, and their binding to operator DNA is not impaired.     

Characterization of the herpes simplex virus origin binding protein interaction with OriS.

The origin binding protein (OBP) of herpes simplex virus (HSV), which is essential for viral DNA replication, binds specifically to sequences within the viral replication origin(s) (for a review, see Challberg, M.D., and Kelly, T. J. (1989) Annu. Rev. Biochem. 58, 671-717). Using either a COOH-terminal OBP protein A fusion or the full-length protein, each expressed in Escherichia coli, we investigated the interaction of OBP with one HSV origin, OriS. Binding of OBP to a set of binding site variant sequences demonstrates that the 10-base pair sequence, 5' CGTTCGCACT 3', comprises the OBP-binding site. This sequence must be presented in the context of at least 15 total base pairs for high affinity binding, Ka = approximately 0.3 nM. Single base pair mutations in the central CGC sequence lower the affinity by several orders of magnitude, whereas a substitution at any of the other seven positions reduces the affinity by 10-fold or less. OBP binds with high affinity to duplex DNA containing mismatched base pairs. This property is exploited to analyze OBP binding to DNA heteroduplexes containing singly substituted mutant and wild-type DNA strands. For positions 2, 3, 5, 6, 7, 8, and 9, substitutions are tolerated on one or the other DNA strand, indicating that base-mediated interactions are limited to one base of each pair. For both Boxes I and II, these interactions are localized to one face of the DNA helix, forming a recognition surface in the major groove. In OriS, the 31 base pairs which separate Boxes I and II orient the two interaction surfaces to the same side of the DNA.     

Requirements for noncovalent binding of vaccinia topoisomerase I to duplex DNA.

Vaccinia DNA topoisomerase binds duplex DNA and forms a covalent adduct at sites containing a conserved sequence element 5'(C/T)CCTT decreases in the scissile strand. Distinctive aspects of noncovalent versus covalent interaction emerge from analysis of the binding properties of Topo(Phe-274), a mutated protein which is unable to cleave DNA, but which binds DNA noncovalently. Whereas DNA cleavage by wild type enzyme is most efficient with 'suicide' substrates containing fewer than 10 base pairs distal to the scissile bond, optimal noncovalent binding by Topo(Phe-274) requires at least 10-bp of DNA 3' of the cleavage site. Thus, the region of DNA flanking the pentamer motif serves to stabilize the noncovalent topoisomerase-DNA complex. This result is consistent with the downstream dimensions of the DNA binding site deduced from nuclease footprinting. Topo(Phe-274) binds to duplex DNA lacking the consensus pentamer with 7-10-fold lower affinity than to CCCTT-containing DNA.     

Moloney murine leukemia virus integration protein produced in yeast binds specifically to viral att sites.

The integration protein (IN) of Moloney murine leukemia virus (MuLV), purified after being produced in yeast cells, has been analyzed for its ability to bind its putative viral substrates, the att sites. An electrophoretic mobility shift assay revealed that the Moloney MuLV IN protein binds synthetic oligonucleotides containing att sequences, with specificity towards its cognate (MuLV) sequences. The terminal 13 base pairs, which are identical at both ends of viral DNA, are sufficient for binding if present at the ends of oligonucleotide duplexes in the same orientation as in linear viral DNA. However, only weak binding was observed when the same sequences were positioned within a substrate in a manner simulating att junctions in circular viral DNA with two long terminal repeats. Binding to att sites in oligonucleotides simulating linear viral DNA was dependent on the presence of the highly conserved CA residues preceding the site for 3' processing (an IN-dependent reaction that removes two nucleotides from the 3' ends of linear viral DNA); mutation of CA to TG abolished binding, and a CA to TA change reduced affinity by at least 20-fold. Removal of either the terminal two base pairs from both ends of the oligonucleotide duplex or the terminal two nucleotides from the 3' ends of each strand did not affect binding. The removal of three 3' terminal nucleotides, however, abolished binding, suggesting an essential role for the A residue immediately upstream of the 3' processing site in the binding reaction. These results help define the sequence requirements for att site recognition by IN, explain the conservation of the subterminal CA dinucleotide, and provide a simple assay for sequence-specific IN activity.     

Sequence recognition in the minor groove of DNA by covalently linked formamido imidazole-pyrrole-imidazole polyamides: effect of H-pin linkage and linker length on selectivity and affinity

The polyamide N-formamido imidazole-pyrrole-imidazole (f-ImPyIm) binds with an exceptionally high affinity for its cognate site 5'-ACGCGT-3' as a stacked, staggered, and noncovalent cooperative dimer. Investigations are presented into its sequence specificity and binding affinity when linked covalently as an H-pin "dimer". Five f-ImPyIm cross-linked analogues with six to nine methylene linkers and an eight-linked ethylene glycol linker were examined to investigate the effect of linkage and linker length on DNA binding. Thermal denaturation studies on short DNA hairpins showed preferential binding by both f-ImPyIm (DeltaTm = 7.8 degrees C) and its cross-linked derivatives (DeltaTm > 30 degrees C) at 5'-ACGCGT-3', indicating sequence specificity was retained on linkage. DNase I footprinting confirmed strict cognate site selectivity and demonstrated that affinity increased with linker length (f-ImPyIm-9 = f-ImPyIm-8 = f-ImPyIm-EG-8 > f-ImPyIm-7 > f-ImPyIm-6). The eight- and nine-linked derivatives bound at 100-fold lower concentrations at the cognate site relative to f-ImPyIm-6, and with 10-fold higher affinity than unlinked f-ImPyIm. Use of an ethylene glycol linkage in f-ImPyIm-EG-8 to improve solubility slightly increased the cognate site affinity relative to those of f-ImPyIm-8 and f-ImPyIm-9, although some selectivity was lost at high ligand concentration. CD demonstrated that cognate site binding by eight and nine-linked compounds occurred in the minor groove. SPR analysis gave a binding affinity (K) for f-ImPyIm-EG-8 at the cognate site of 2 x 10(10) M-1, representing a 100-fold increase relative to that of f-ImPyIm. This study demonstrates that the high-affinity cooperative binding of f-ImPyIm can be enhanced significantly by suitable covalent linkage, while maintaining its strict cognate site selectivity.     

Properties of the PriA helicase domain and its role in binding PriA to specific DNA structures

Primosome assembly protein PriA functions in the assembly of the replisome at forked DNA structures. Whereas its N-terminal DNA binding domain (DBD) binds independently to DNA, the affinity of DBD protein for forked structures is relatively weak. Although the PriA helicase domain (HD) is required for high affinity fork binding, HD protein had very low affinity for DNA. It had only low levels of ATPase activity, and it hydrolyzed ATP when DNA was absent whereas PriA did not. HD catalyzed unwinding of a minimal substrate composed of a duplex with a 3' single-stranded tail. Single-strand binding protein (SSB) bound to the tail of this substrate inhibited this reaction by full-length PriA but enhanced the reaction by HD. SSB stabilized binding of PriA but not of DBD or HD to duplexes with a 5' or 3' single-stranded tail. On forked substrates SSB enhanced helicase action on the lagging-strand arm by PriA but not by HD. The results indicate that synergy of the DBD and HD allows stable binding at the interface between duplex and single-stranded DNA bound by SSB. This mode of binding may be analogous to fork binding, which orients the helicase to act on the lagging-strand side of the fork.     

The yeast telomere length regulator TEL2 encodes a protein that binds to telomeric DNA.

TEL2 is required for telomere length regulation and viability in Saccharomyces cerevisiae. To investigate the mechanism by which Tel2p regulates telomere length, the majority (65%) of the TEL2 ORF was fused to the 3'-end of the gene for maltose binding protein, expressed in bacteria and the purified protein used in DNA binding studies. Rap1p, the major yeast telomere binding protein, recognizes a 13 bp duplex site 5'-GGTGTGTGGGTGT-3' in yeast telomeric DNA with high affinity. Gel shift experiments revealed that the MBP-Tel2p fusion binds the double-stranded yeast telomeric Rap1p site in a sequence-specific manner. Analysis of mutated sites showed that MBP-Tel2p could bind 5'-GTGTGTGG-3' within this 13 bp site. Methylation interference analysis revealed that Tel2p contacts the 5'-terminal guanine in the major groove. MBP-Tel2p did not bind duplex telomeric DNA repeats from vertebrates, Tetrahymena or Oxytricha. These results suggest that Tel2p is a DNA binding protein that recognizes yeast telomeric DNA.     

HU binding to bent DNA: a fluorescence resonance energy transfer and anisotropy study

HU, an architectural DNA-binding protein, either stabilizes DNA in a bent conformation or induces a bend upon binding to give other proteins access to the DNA. In this study, HU binding affinity for a bent DNA sequence relative to a linear sequence was investigated using fluorescence anisotropy measurements. A static bend was achieved by the introduction of two phased A4T4 tracts in a 20 bp duplex. Binding affinity for 20 bp duplexes containing two phased A-tracts in either a 5'-3' or 3'-5' orientation was found to be almost 10-fold higher than HU binding to a random sequence 20 bp duplex (6.1 vs 0.68 microM(-1)). The fluorescence technique of resonance energy transfer was used to quantitatively determine the static bend of the DNA duplexes and the HU-induced bend. DNA molecules were 5'-end labeled with fluorescein as the donor or rhodamine as the acceptor. From the efficiency of energy transfer, the end-to-end distance of the DNA duplexes was calculated. The end-to-end distance relative to DNA contour length (R/R(C)) yields a bend angle for the A-tract duplex of 45 +/- 7 degrees in the absence of HU and 70 +/- 3 degrees in the presence of HU. The bend angle calculated for the T4A4 tract duplex was 62 +/- 4 degrees after binding two HU dimers. Fluorescence anisotropy measurements reveal that HU binds in a 1:1 stoichiometry to the A4T4 tract duplex but a 2:1 stoichiometry to the T4A4 tract and random sequence duplex. These findings suggest that HU binding and recognition of DNA may be governed by a structural mechanism.     

Recognition of base J in duplex DNA by J-binding protein.

beta-d-Glucosylhydroxymethyluracil, also called base J, is an unusual modified DNA base conserved among Kinetoplastida. Base J is found predominantly in repetitive DNA and correlates with epigenetic silencing of telomeric variant surface glycoprotein genes. We have previously found a J-binding protein (JBP) in Trypanosoma, Leishmania, and Crithidia. We have now characterized the binding properties of recombinant JBP from Crithidia using synthetic J-DNA substrates that contain the glycosylated base in various DNA sequences. We find that JBP recognizes base J only when presented in double-stranded DNA but not in single-stranded DNA or in an RNA:DNA duplex. It also fails to interact with free glucose or free base J. JBP is unable to recognize nonmodified DNA or intermediates of J synthesis, suggesting that JBP is not directly involved in J biosynthesis. JBP binds J-DNA with high affinity (K(d) = 40-140 nm) but requires at least 5 bp flanking the glycosylated base for optimal binding. The nature of the flanking sequence affects binding because J in a telomeric sequence binds JBP with higher affinity than J in another sequence known to contain J in trypanosome DNA. We conclude that JBP is a structure-specific DNA-binding protein. The significance of these results in relation to the biological role and mechanism of action of J modification in kinetoplastids is discussed.     

Dual DNA recognition codes of a short peptide derived from the basic leucine zipper protein EmBP1

Sequence-specific DNA binding of short peptide dimers derived from a plant basic leucine zipper protein EmBP1 was studied. A homodimer of the EmBP1 basic region peptide recognized a palindromic DNA sequence, and a heterodimer of EmBP1 and GCN4 basic region peptides targets a non-palindromic DNA sequence when a beta-cyclodextrin/adamantane complex is utilized as a dimerization domain. A homodimer of the EmBP1 basic region peptide binds the native EmBP1 binding 5'-GCCACGTGGC-3' and the native GCN4 binding 5'-ATGACGTCAT-3' sequences with almost equal affinity in the alpha-helical conformation, indicating that the basic region of EmBP1 by itself has a dual recognition codes for the DNA sequences. The GCN4 basic region peptide binds 5'-ATGAC-3' in the alpha-helical conformation, but it neither shows affinity nor helix formation with 5'-GCCAC-3'. Because native EmBP1 forms 100 times more stable complex with 5'-GCCACGTGGC-3' over 5'-ATGACGTCAT-3', our results suggest that the sequence-selectivity of native EmBP1 is dictated by the structure of leucine zipper dimerization domain including the hinge region spanning between the basic region and the leucine zipper.     

An altered DNA conformation in origin region I is a determinant for the binding of SV40 large T antigen

Seventeen base pairs of DNA from SV40 origin region I encode a tripartite binding site for a dimeric mass of SV40 large T antigen. Two binding components are the directly repeated pentanucleotide sequences 5'-GAGGC-3'/5'-GCCTC-3'. The third component is the asymmetric sequence 5'-TTTTTTG-3'/5'-CAAAAAA-3' that separates the pentanucleotides. Nucleotide-specific features of this spacer element stabilize binding to the adjacent pentanucleotides. We report here that the spacer sequence determines a DNA conformation that correlates with high affinity binding of T antigen. The nature of the spacer sequence suggests that the DNA is bent. We propose that binding of T antigen to region I proceeds through monomer-pentanucleotide interactions and either protein-protein or protein-spacer interactions directed by the spacer-encoded structure.     

DNA binding of a short lexitropsin

Footprinting, capillary electrophoresis, molecular modelling and NMR studies have been used to examine the binding of a short polyamide to DNA. This molecule, which contains an isopropyl-substituted thiazole in place of one of the N-methylpyrroles, is selective for the sequence 5'-ACTAGT-3' to which it binds with high affinity. Two molecules bind side-by-side in the minor groove, but their binding is staggered so that the molecule reads six base pairs, unlike the related natural products, which tend to bind to four-base-pair sequences. The result suggests that high affinity and selectivity may be gained without resort to very large molecules, which may be difficult to deliver to the site of action.     

Effect of site-specific DNA methylation and mutagenesis on recognition by methylated DNA-binding protein from human placenta.

Methylated DNA-binding protein (MDBP) from human placenta is the first protein shown to bind specifically to certain DNA sequences only when they are methylated at cytosine residues. Among the sites recognized by MDBP is pB site 1, a pBR322-derived sequence which has a high affinity for MDBP when methylated at all CpG positions. We have substituted pB site 1 with 5-methyl-cytosine (m5C) residues at one to three of its CpG dinucleotides on one strand by the use of m5C-containing oligonucleotides. MDBP binds best when all three CpG dinucleotides in the region 5'-ATCGTCACGGCGAT-3' are methylated. Even more binding is obtained when both strands are methylated. Alteration of various residues in this binding site by oligonucleotide-directed mutagenesis decreased the binding. However, two mutations which increased the dyad symmetry of part of the binding site yielded ligands with a higher affinity for MDBP.