Cloning and sequencing of the gene encoding flavodoxin from Desulfovibrio vulgaris Hildenborough

Abstract The gene encoding flavodoxin from Desulfovibrio vulgaris Hildenborough (148 amino acid residues), the first flavoprotein for which a three-dimensional structure has been determined, was cloned with the use of two synthetic oligonucleotides, designed to recognize the coding sequence for amino acid residues 11–19 and 98–103, respectively. The two oligonucleotides were used to screen a library of 900 λ-clones of the D. vulgaris chromosome. A single clone, λFL1, reacting with both probes was isolated. The entire structural gene for flavodoxin is contained in the 15 kb insert of λFL1 as found by nucleic acid sequencing. The codon usage in the flavodoxin gene is strongly biased towards G or C in the third codon position. A table in which codon usage information from all genes of D. vulgaris sequenced to date is combined is presented and should facilitate further gene cloning with oligonucleotide probes.     

Nucleotide sequence of the gene encoding the hydrogenase from Desulfovibrio vulgaris (Hildenborough)

The nucleotide sequence of the 4.7-kb SalI/EcoRI insert of plasmid pHV 15 containing the hydrogenase gene from Desulfovibrio vulgaris (Hildenborough) has been determined with the dideoxy chain-termination method. The structural gene for hydrogenase encodes a protein product of molecular mass 45820 Da. The NH2-terminal sequence of the enzyme deduced from the nucleic acid sequence corresponds exactly to the amino acid sequence determined by Edman degradation. The nucleic acid sequence indicates that a N-formylmethionine residue precedes the NH2-terminal amino acid Ser-1. There is no evidence for a leader sequence. The NH2-terminal part of the hydrogenase shows homology to the bacterial [8Fe-8S] ferredoxins. The sequence Cys-Ile-Xaa-Cys-Xaa-Xaa-Cys-Xaa-Xaa-Xaa-Cys-Pro-Xaa-Xaa-Ala-(Ile) occurs twice both in the hydrogenase and in [8Fe-8S] ferredoxins, where the Cys residues have been shown to coordinate two [4Fe-4S] clusters [Adman, E. T., Sieker, L. C. and Jensen, L. H. (1973) J. Biol. Chem. 248, 3987-3996]. These results, therefore, suggest that two electron-transferring ferredoxin-like [4Fe-4S] clusters are located in the NH2-terminal segment of the hydrogenase molecule. There are ten more Cys residues but it is not clear which four of these could participate in the formation of the third cluster, which is thought to be the hydrogen binding centre. Another gene, encoding a protein of molecular mass 13493 Da, was found immediately downstream from the gene for the 46-kDa hydrogenase. The nucleic acid sequence suggests that the hydrogenase and the 13.5-kDa protein belong to a single operon and are coordinately expressed. Since dodecylsulfate gel electrophoresis of purified hydrogenase indicates the presence of a 13.5-kDa polypeptide in addition to the 46-kDa component, it is proposed that the hydrogenase from D. vulgaris (Hildenborough) is a two-subunit enzyme.     

Redox and flavin-binding properties of recombinant flavodoxin from Desulfovibrio vulgaris (Hildenborough).

Flavodoxin from Desulfovibrio vulgaris (Hildenborough) has been expressed at a high level (3-4% soluble protein) in Escherichia coli by subcloning a minimal insert carrying the gene behind the tac promoter of plasmid pDK6. The recombinant protein was readily isolated and its properties were shown to be identical to those of the wild-type protein obtained directly from D. vulgaris, with the exception that the recombinant protein lacks the N-terminal methionine residue. Detailed measurements of the redox potentials of this flavodoxin are reported for the first time. The redox potential, E2, for the couple oxidized flavodoxin/flavodoxin semiquinone at pH 7.0 is -143 mV (25 degrees C), while the value for the flavodoxin semiquinone/flavodoxin hydroquinone couple (E1) at the same pH is -440 mV. The effects of pH on the observed potentials were examined; E2 varies linearly with pH (slope = -59 mV), while E1 is independent of pH at high pH values, but below pH 7.5 the potential becomes less negative with decreasing pH, indicating a redox-linked protonation of the flavodoxin hydroquinone. D. vulgaris apoflavodoxin binds FMN very tightly, with a value of 0.24 nM for the dissociation constant (Kd) at pH 7.0 and 25 degrees C, similar to that observed with other flavodoxins. In addition, the apoflavodoxin readily binds riboflavin (Kd = 0.72 microM; 50 mM sodium phosphate, pH 7.0, 5 mM EDTA at 25 degrees C) and the complex is spectroscopically very similar to that formed with FMN. The redox potentials for the riboflavin complex were determined at pH 6.5 (E1 = -262 mV, E2 = -193 mV; 25 degrees C) and are discussed in the light of earlier proposals that charge/charge interactions between different parts of the flavin hydroquinone play a crucial role in determining E1 in flavodoxin.     

Cloning, sequencing, and expression of the gene encoding the high-molecular-weight cytochrome c from Desulfovibrio vulgaris Hildenborough.

By using a synthetic deoxyoligonucleotide probe designed to recognize the structural gene for cytochrome cc3 from Desulfovibrio vulgaris Hildenborough, a 3.7-kb XhoI genomic DNA fragment containing the cc3 gene was isolated. The gene encodes a precursor polypeptide of 58.9 kDa, with an NH2-terminal signal sequence of 31 residues. The mature polypeptide (55.7 kDa) has 16 heme binding sites of the form C-X-X-C-H. Covalent binding of heme to these 16 sites gives a holoprotein of 65.5 kDa with properties similar to those of the high-molecular-weight cytochrome c (Hmc) isolated from the same strain by Higuchi et al. (Y. Higuchi, K. Inaka, N. Yasuoka, and T. Yagi, Biochim. Biophys. Acta 911:341-348, 1987). Since the data indicate that cytochrome cc3 and Hmc are the same protein, the gene has been named hmc. The Hmc polypeptide contains 31 histidinyl residues, 16 of which are integral to heme binding sites. Thus, only 15 of the 16 hemes can have bis-histidinyl coordination. A comparison of the arrangement of heme binding sites and coordinated histidines in the amino acid sequences of cytochrome c3 and Hmc from D. vulgaris Hildenborough suggests that the latter contains three cytochrome c3-like domains. Cloning of the D. vulgaris Hildenborough hmc gene into the broad-host-range vector pJRD215 and subsequent conjugational transfer of the recombinant plasmid into D. desulfuricans G200 led to expression of a periplasmic Hmc gene product with covalently bound hemes.     

Identification, sequence determination, and expression of the flavodoxin gene from Desulfovibrio salexigens

Restriction fragments of genomic DNA from Desulfovibrio salexigens (ATCC 14822) containing the structural gene coding for the flavodoxin protein were identified using the entire coding region of the gene for the Desulfovibrio vulgaris (Hildenborough) flavodoxin as a probe (Krey, G.D., Vanin, E.F., and Swenson, R.P. (1988) J. Biol. Chem. 263, 15436-15443). A 1.4-kb PstI-HindIII fragment was ultimately identified which contains an open reading frame coding for a polypeptide of 146 amino acid residues that was highly homologous to the D. vulgaris flavodoxin, sharing a sequence identity of 55%. When compared to the X-ray crystal structure of the D. vulgaris protein, the homologous regions were largely confined to those portions of the protein which are in the immediate vicinity of the flavin mononucleotide cofactor binding site. Tryptophan-60 and tyrosine-98, which reside on either side of the isoalloxazine ring of the cofactor, are conserved, as are the sequences of the polypeptide loop that interacts with the phosphate moiety of the flavin. Acidic residues forming the interface of model electron-transfer complexes with certain cytochrome c proteins are retained. The flavodoxin holoprotein is over-expressed in E. coli from the cloned gene using its endogenous promoter.     

Cloning and sequencing of the gene encoding cytochrome c553 from Desulfovibrio vulgaris Hildenborough.

The gene encoding cytochrome c553 from Desulfovibrio vulgaris Hildenborough was cloned by using two synthetic deoxyoligonucleotide probes. The amino acid sequence derived from the sequence of the gene differs from that reported by Bruschi and LeGall (Biochim. Biophys. Acta 271:48-60, 1972). Renewed protein sequencing confirmed the correctness of the DNA-derived sequence. The gene sequence indicates cytochrome c553 to be synthesized as a precursor protein with an NH2-terminal signal sequence of 24 residues.     

Cloning and expression of the enolase gene from Desulfovibrio vulgaris (Miyazaki F)

The gene encoding an enolase from Desulfovibrio vulgaris (Miyazaki F) was cloned and overexpressed in Escherichia coli. A 2.1-kb DNA fragment, isolated from D. vulgaris (Miyazaki F) by double digestion with PstI and BamHI, contained an enolase gene (eno) and part of the methylenetetrahydrofolate dehydrogenase gene (folD). The nucleotide sequence of eno indicates that the protein monomer is composed of 434 amino acids. An expression system for eno under control of the T7 promoter was constructed in E. coli. The purified His-tagged enolase formed a homooctamer and was active in the formation of phosphoenolpyruvate (PEP) as well as in the reverse reaction, the formation of D-(+)-2-phosphoglyceric acid (2-PGA). The pH dependence and kinetic properties of the recombinant enolase from the sulfate-reducing bacterium were also studied. The amounts of eno mRNA when the bacterium was grown on glycerol or glucose were compared to that when D. vulgaris was grown on lactate.     

Extraction of periplasmic hydrogenase from Desulfovibrio vulgaris (Hildenborough)

Abstract Periplasmic hydrogenase from Desulfovibrio vulgaris (Hildenborough) was extracted according to the method of van der Westen [8] and the effect of trace minerals on the extractability of this enzyme was investigated. The final growth yields in the presence or absence of trace minerals were the same; however, the growth was much faster and the amount of periplasmic hydrogenase extracted was significantly lower in the presence of trace minerals. Polyacrylamide gel electrophoresis showed the presence of 2 hydrogenases in D. vulgaris , one soluble and the other possibly membrane-bound.     

Cloning and characterization of the flavodoxin gene from Desulfovibrio desulfuricans

The gene coding for the flavodoxin protein from Desulfovibrio desulfuricans [Essex 6] (ATCC 29577) has been cloned and sequenced. The gene was identified on Southern blots of HindIII-digested genomic DNA by hybridization to the coding region for the flavodoxin from Desulfovibrio vulgaris [Hildenborough] (Krey, G.D., Vanin, E.F. and Swenson, R.P. (1988) J. Biol. Chem. 263, 15436-15443). Ultimately, a 1.8 kb TaqI fragment was cloned which contains an open reading frame of 447 nucleotides coding for an acidic protein of 148 amino acids and calculated molecular weight of 15,726. The derived amino acid sequence of this protein is 47% identical to the flavodoxin from D. vulgaris. Regions of the polypeptide which form the flavin mononucleotide binding site are largely homologous; however, some perhaps significant differences are noted. The aromatic amino acid residues that flank the flavin isoalloxazine ring in the D. vulgaris structure, i.e., tryptophan-60 and tyrosine-98, are conserved in this flavodoxin.     

Amino acid sequence of Desulfovibrio vulgaris flavodoxin.

The complete amino acid sequence for the 148-amino acid flavodoxin from Desulfovibrio vulgaris was determined to be: H3N+-Met-Pro-Lys-Ala-Leu-Ile-Val-Tyr-Gly-Ser-Thr-Thr-Gly-Asn-Thr-Glu-Tyr-Thr-Ala-Glu-Thr-Ile-Ala-Arg-Glu-Leu-Ala-Asn-Ala-Gly-Tyr-Glu-Val-Asp-Ser-Arg-Asp-Ala-Ala-Ser-Val-Glu-Ala-Gly-Gly-Leu-Phe-Glu-Gly-Phe-Asp-Leu-Val-Leu-Leu-Gly-Cys-Ser-Thr-Trp-Gly-Asp-Asp-Ser-Ile-Glu-Leu-Gln-Asp-Asp-Phe-Ile-Pro-Leu-Phe-Asp-Ser-Leu-Glu-Glu-Thr-Gly-Ala-Gln-Gly-Arg-Lys-Val-Ala-Cys-Phe-Gly-Cys-Gly-Asp-Ser-Ser-Tyr-Glu-Tyr-Phe-Cys-Gly-Ala-Val-Asp-Ala-IleGlu-Glu-Lys-Leu-Lys-Asn-Leu-Gly-Ala-Glu-Ile-Val-Gln-Asp-Gly-Leu-Arg-Ile-Asp-Gly-Asp-Pro-Arg-Ala-Ala-Arg-Asp-Asp-Ile-Val-Gly-Try-Ala-His-Asp-Val-Arg-Gly-Ala-Ile-COO. This protein is of interest as it was the first flavoenzyme for which high resolution x-ray diffraction studies were published (Watenpaugh, K.D., Sieker, L.C., and Jensen, L.H. (1973) Proc. NAtl. Acad. Sci. U.S.A. 70, 3857-3860). Ser(10), Thr(12), Asn(14), and Thr(15) were shown to bind the phosphate of the FMN while the isoalloxazine ring is positioned between Trp(60) and Tyr(98).     

Nucleotide sequence of dcrA, a Desulfovibrio vulgaris Hildenborough chemoreceptor gene, and its expression in Escherichia coli.

The amino acid sequence of DcrA (Mr = 73,000), deduced from the nucleotide sequence of the dcrA gene from the anaerobic, sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough, indicates a structure similar to the methyl-accepting chemotaxis proteins from Escherichia coli, including a periplasmic NH2-terminal domain (Mr = 20,700) separated from the cytoplasmic COOH-terminal domain (Mr = 50,300) by a hydrophobic, membrane-spanning sequence of 20 amino acid residues. The sequence homology of DcrA and these methyl-accepting chemotaxis proteins is limited to the COOH-terminal domain. Analysis of dcrA-lacZ fusions in E. coli by Western blotting (immunoblotting) and activity measurements indicated a low-level synthesis of a membrane-bound fusion protein of the expected size (Mr = approximately 137,000). Expression of the dcrA gene under the control of the Desulfovibrio cytochrome c3 gene promoter and ribosome binding site allowed the identification of both full-length DcrA and its NH2-terminal domain in E. coli maxicells.     

Kinetic properties of hydrogenase isolated from Desulfovibrio vulgaris (Hildenborough)

Hydrogenase of Desulfovibrio vulgaris shows nonlinear kinetics in hydrogen production with both the natural electron carrier, cytochrome c3, and the artificial donor, methyl viologen semiquinone. Increasing concentrations of salt progressively inhibit the hydrogen production, as do increasing amounts of dimethylsulfoxide (Me2SO). Hydrogen consumption activity does not change up to 30% (v/v) of Me2SO. Preincubation in Me2SO up to 55% (v/v) does not affect the hydrogen uptake or production. The production activity of the enzyme shows an optimum around pH 6. When plotted as a function of redox potential the activity can be fitted to a Nernst equation with n = 1. Midpoint potentials calculated at various values follow approximately the hydrogen electrode to pH 6. Thereafter, there is a shift of about 40 mV to higher redox potentials.     

Cloning of genes encoding redox proteins of known amino acid sequence from a library of the Desulfovibrio vulgaris (Hildenborough) genome

A library of 900 recombinant phages has been constructed for the genome of Desulfovibrio vulgaris Hildenborough (1.7 x 10(6) bp) by cloning size-fractionated Sau3A fragments (15-20 kb) into the replacement vector lambda-2001. When a hydrogenase gene probe, a 4.7-kb SalI-EcoRI fragment of known nucleotide sequence, was used to screen the plaque lifted library, 23 positive clones were found, which together span 31 kb of D. vulgaris DNA. To facilitate the cloning of genes with oligodeoxynucleotides as probes, DNA was purified for all clones in the library and spotted on a 16 x 16-cm grid of nitrocellulose. This grid was incubated sequentially to identify lambda clones containing the gene for redox proteins of known amino acid sequence: cytochrome c3 (one 18-mer----four clones), flavodoxin (one 17-mer and one 26-mer----one clone) and rubredoxin (one 44-mer----21 clones). The four cyc-positive clones are also recognized by the rubredoxin oligodeoxynucleotide probe. Restriction mapping defines a 35-kb region of the D. vulgaris chromosome in which the rub and cyc loci are separated by 17.5 kb. The nucleotide sequence of the rubredoxin gene was determined and the deduced amino acid sequence found to agree with that determined in Bruschi [Biochim. Biophys. Acta 434 (1976) 4-17] with the exception of Thr-21 which is found to be encoded by GAC, an Asp codon. A plausible ribosome-binding site precedes the N-terminal initiator methionine residue. Rubredoxin does not have an N-terminal signal sequence which is in agreement with the cytoplasmic location of this redox protein.     

The genome sequence of the anaerobic, sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough

Desulfovibrio vulgaris Hildenborough is a model organism for studying the energy metabolism of sulfate-reducing bacteria (SRB) and for understanding the economic impacts of SRB, including biocorrosion of metal infrastructure and bioremediation of toxic metal ions. The 3,570,858 base pair (bp) genome sequence reveals a network of novel c-type cytochromes, connecting multiple periplasmic hydrogenases and formate dehydrogenases, as a key feature of its energy metabolism. The relative arrangement of genes encoding enzymes for energy transduction, together with inferred cellular location of the enzymes, provides a basis for proposing an expansion to the 'hydrogen-cycling' model for increasing energy efficiency in this bacterium. Plasmid-encoded functions include modification of cell surface components, nitrogen fixation and a type-III protein secretion system. This genome sequence represents a substantial step toward the elucidation of pathways for reduction (and bioremediation) of pollutants such as uranium and chromium and offers a new starting point for defining this organism's complex anaerobic respiration.     

Effects of biocides on gene expression in the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough

Although sulfate-reducing bacteria (SRB), such as Desulfovibrio vulgaris Hildenborough (DvH) are often eradicated in oil and gas operations with biocides, such as glutaraldehyde (Glut), tetrakis (hydroxymethyl) phosphonium sulfate (THPS), and benzalkonium chloride (BAC), their response to these agents is not well known. Whole genome microarrays of D. vulgaris treated with biocides well below the minimum inhibitory concentration showed that 256, 96, and 198 genes were responsive to Glut, THPS, and BAC, respectively, and that these three commonly used biocides affect the physiology of the cell quite differently. Glut induces expression of genes required to degrade or refold proteins inactivated by either chemical modification or heat shock, whereas BAC appears to target ribosomal structure. THPS appears to primarily affect energy metabolism of SRB. Mutants constructed for genes strongly up-regulated by Glut, were killed by Glut to a similar degree as the wild type. Hence, it is difficult to achieve increased sensitivity to this biocide by single gene mutations, because Glut affects so many targets. Our results increase understanding of the biocide's mode of action, allowing a more intelligent combination of mechanistically different agents. This can reduce stress on budgets for chemicals and on the environment.     

Cloning and expression of the catalase gene from the anaerobic bacterium Desulfovibrio vulgaris (Miyazaki F)

We identified a gene encoding a catalase from the anaerobic bacteria Desulfovibrio vulgaris (Miyazaki F), and the expression of its gene in Escherichia coli. The 3.3-kbp DNA fragment isolated from D. vulgaris (Miyazaki F) by double digestion with EcoRI and SalI was found to produce a protein that binds protoheme IX as a prosthetic group in E. coli. This DNA fragment contained a putative open reading frame (Kat) and one part of another open reading frame (ORF-1). The amino acid sequence of the amino terminus of the protein purified from the transformed cells was consistent with that deduced from the nucleotide sequence of Kat in the cloned fragment of D. vulgaris (Miyazaki F) DNA, which may include promoter and regulatory sequences. The nucleotide sequence of Kat indicates that the protein is composed of 479 amino acids per monomer. The recombinant catalase was found to be active in the decomposition of hydrogen peroxide, as are other catalases from aerobic organisms, but its K(m) value was much greater. The hydrogen peroxide stress against D. vulgaris (Miyazaki F) induced the activity for the decomposition of hydrogen peroxide somewhat, so the catalase gene may not work effectively in vivo.