Crystalline T4 bacteriophage

Concentrated suspensions of T4 phage crystallize spontaneously in the absence of tryptophan. The crystals, in one plane, contain repeated bilayers of phage in head to head and tail to tail contact, probably with tail fibers retracted. In the plane of each layer there is hexagonal packing of the phage.     

Transfection of Lactobacillus bulgaricus protoplasts by bacteriophage DNA.

A protoplast transfection system has been developed for Lactobacillus bulgaricus. The procedure involves a polyethylene glycol-mediated fusion of bacteriophage DNA encapsulated in liposomes into mutanolysin-treated cells. With L. bulgaricus B004 and DNA isolated from the phage phi c5004, transfection reached a maximum when at least 95% of the cells were osmotically fragile. The incorporation of phage DNA into liposomes was essential; no transfectants were detected in the absence of liposomes. The largest number of transfectants was observed after longer periods (20 min) of fusion of mutanolysin-treated cells and liposomes with polyethylene glycol. The maximum efficiency of 5 x 10(7) PFU/microgram of DNA was reached after a 24-h incubation in growth media prior to plating transfected cells in an agar overlay to detect the appearance of plaques. A minimum of 4 h of incubation in growth medium after fusion was required to detect the production and release of virions. The possibility that the high frequencies observed were due to bursting of transfected cells and subsequent infection of additional cells was found not to be a factor. The number of transfectants observed was directly proportional to the quantity of DNA added. These results define conditions appropriate for the introduction of DNA into L. bulgaricus.     

Preparation and partial characterization of a Lactobacillus lactis bacteriophage

High-titer lysates of a bacteriophage active against Lactobacillus lactis were prepared from liquid cultures as well as from areas of confluent lysis in soft-agar overlayers. Phage concentration and purification were accomplished by means of polyethylene glycol precipitation, differential centrifugation, and cesium chloride gradient centrifugation. The buoyant density of this phagein cesium chloride was 1.4795 g/ml. Characterization of phage growth cycle by one-step growth experiments under optimal conditions showed that the latent period was about 120 min, that the rise period lasted approx. 130 min, and that the average burst-size was about 80.Abbreviations p.f.u. plaque forming units - m.o.i. multiplicity of infection - PEG polyethylene glycol - SSC standard saline citrate solution     

Crystalline aggregation of a proteolytic fragment of the major head protein of bacteriophage T4.

An analysis has been made of the composition and structure of the two types of sheets assembled from material from dissociated bacteriophage T2 (Poglazov &; Mesyhanzhinov, 1967) and T4 capsids. Serological techniques have been used to show that both types of sheet are assembled from proteolytic fragment of P23¹, the major capsid constituent. The two types of sheets have been found to interconvert depending on the concentration of Mg²⁺ ions in the buffer. Computer modelling experiments show that the “hexagonal” and “rectangular” morphologies observed in the negative stain are due to in-register and staggered associations, respectively, of a single basic hexagonal lattice. Analysis by polyacrylamide gel electrophoresis of samples of sheets and dissociated capsids, together with previous results from immune electron microscopy (Kistler et al., 1978), suggest that hexamers of the proteolytic fragment are derived conservatively from capsomers of the phage head.The value of this proteolytic P23 fragment has been twofold: (1) it has proved to be a useful peptide in the ongoing primary sequence determination of P23 and (2) antibodies raised against it have been employed to follow the fate of P23 antigenic sites during various steps of phage capsid maturation (Kistler et al., 1978).     

Transfection of Lactobacillus bulgaricus protoplasts by bacteriophage DNA

A protoplast transfection system has been developed for Lactobacillus bulgaricus. The procedure involves a polyethylene glycol-mediated fusion of bacteriophage DNA encapsulated in liposomes into mutanolysin-treated cells. With L. bulgaricus B004 and DNA isolated from the phage phi c5004, transfection reached a maximum when at least 95% of the cells were osmotically fragile. The incorporation of phage DNA into liposomes was essential; no transfectants were detected in the absence of liposomes. The largest number of transfectants was observed after longer periods (20 min) of fusion of mutanolysin-treated cells and liposomes with polyethylene glycol. The maximum efficiency of 5 x 10(7) PFU/microgram of DNA was reached after a 24-h incubation in growth media prior to plating transfected cells in an agar overlay to detect the appearance of plaques. A minimum of 4 h of incubation in growth medium after fusion was required to detect the production and release of virions. The possibility that the high frequencies observed were due to bursting of transfected cells and subsequent infection of additional cells was found not to be a factor. The number of transfectants observed was directly proportional to the quantity of DNA added. These results define conditions appropriate for the introduction of DNA into L. bulgaricus.     

Preparation and regeneration of bacteriophage PL-1 enzyme-induced Lactobacillus casei protoplasts.

Lactobacillus casei ATCC 27092 protoplasts were obtained by treatment with a bacteriolytic enzyme, which was produced in the PL-1 phage lysates of this bacterium, at 37 degrees C for 1.5 h in 50 mM Tris hydrochloride buffer (pH 7.2) containing 20% sucrose and 10 mM MgSO4. The protoplasts lacked the cell wall layer but retained the ability to transport L-[3H]glutamine. The frequency of regeneration was about 1%, whereas about 99% of the cells were osmotically sensitive.     

Isolation and characterization of a Lactobacillus fermentum temperate bacteriophage from Chinese yogurt

AIMS: The aim of this study was to investigate the properties of temperate bacteriophage of Lactobacillus fermentum, based on its morphology, restriction patterns, protein profile and the impact on the growth of host strain. METHODS AND RESULTS: With Mitomycin C, seven temperate phages were induced from Lactobacilli derived from Chinese yogurt. The temperate phages induced belong to the most common Bradley's group B, having hexagonal head and long, noncontractile tail. They were furthermore confirmed to be the same bacteriophage by identical restriction patterns. SDS-PAGE profile showed that the phage studied had one major structure protein about 31.9 kDa. The presence of the prophage influenced the cell shape and colony size of its lysogenic strain. CONCLUSIONS: The phage obtained had similar, but not complete identical properties with other L. fermentum phages reported. It influenced the growth behaviour of its lysogenic strain. SIGNIFICANCE AND IMPACT OF THE STUDY: This study provides some information about bacteriophages occurring in the Chinese yoghurt manufacture and contributes to our knowledge on the bacteriophage diversity in the dairy industry.     

Physical and genetic characterization of the genome of Lactobacillus lactis bacteriophage LL-H.

Bacteriophage LL-H is a virulent phage of Lactobacillus lactis LL23. A restriction map of the phage genome was constructed with various restriction endonucleases. This chromosome has a 34-kilobase size and seems to be circularly permuted. We used a bank of LL-H restriction fragments to study the expression of five of the seven main phage particle proteins. Immunoblotting experiments permitted the mapping on the chromosome of several genes coding for phage particle proteins. We also show that the gene of the main capsid protein is expressed from its own promoter in an Escherichia coli strain.     

Plasmid integration in a wide range of bacteria mediated by the integrase of Lactobacillus delbrueckii bacteriophage mv4.

Bacteriophage mv4 is a temperate phage infecting Lactobacillus delbrueckii subsp. bulgaricus. During lysogenization, the phage integrates its genome into the host chromosome at the 3' end of a tRNA(Ser) gene through a site-specific recombination process (L. Dupont et al., J. Bacteriol., 177:586-595, 1995). A nonreplicative vector (pMC1) based on the mv4 integrative elements (attP site and integrase-coding int gene) is able to integrate into the chromosome of a wide range of bacterial hosts, including Lactobacillus plantarum, Lactobacillus casei (two strains), Lactococcus lactis subsp. cremoris, Enterococcus faecalis, and Streptococcus pneumoniae. Integrative recombination of pMC1 into the chromosomes of all of these species is dependent on the int gene product and occurs specifically at the pMC1 attP site. The isolation and sequencing of pMC1 integration sites from these bacteria showed that in lactobacilli, pMC1 integrated into the conserved tRNA(Ser) gene. In the other bacterial species where this tRNA gene is less or not conserved; secondary integration sites either in potential protein-coding regions or in intergenic DNA were used. A consensus sequence was deduced from the analysis of the different integration sites. The comparison of these sequences demonstrated the flexibility of the integrase for the bacterial integration site and suggested the importance of the trinucleotide CCT at the 5' end of the core in the strand exchange reaction.     

Genetic and biochemical characterization of the Lactobacillus delbrueckii subsp. lactis bacteriophage LL-H lysin.

LL-H, a virulent phage of Lactobacillus delbrueckii subsp. lactis, produces a peptidoglycan-degrading enzyme, Mur, that is effective on L. delbrueckii, Lactobacillus acidophilus, Lactobacillus helveticus, and Pediococcus damnosus cell walls. In this study, the LL-H gene mur was cloned into Escherichia coli, its nucleotide sequence was determined, and the enzyme produced in E. coli was purified and biochemically characterized. Mur was purified 112-fold by means of ammonium sulfate precipitation and cation-exchange chromatography. The cell wall-hydrolyzing activity was found to be associated with a 34-kDa protein. The C-terminal domain of Mur is not essential for catalytic activity since it can be removed without destroying the lytic activity. The N-terminal sequence of the purified lysin was identical to that deduced from the nucleotide sequence, but the first methionine is absent from the mature protein. The N-terminal part of this 297-amino-acid protein had homology with several Chalaropsis-type lysozymes. Reduction of purified and Mur-digested L. delbrueckii cell wall material with labeled NaB3H4 indicated that the enzyme is a muramidase. The temperature optimum of purified Mur is between 30 and 40 degrees C, and the pH optimum is around 5.0. The LL-H lysin Mur is stable at temperatures below 60 degrees C.     

Crystalline Thymidylate Synthetase From Dichloromethotrexate Resistant Lactobacillus Case I

A procedure is described for the isolation and crystallization of thymidylate synthetase from a dichloromethotrexate resistant strain of Lactobacillus casei. The recrystallized enzyme shows one band on polyacrylamide gel electrophoresis. The specific activity of the recrystallized enzyme is 216 μmoles of thymidylate formed per hour per mg. at30°C.     

Isolation and characterization of a Lactobacillus plantarum bacteriophage isolated from a meat starter culture*

Morphological characterization of a bacteriophage isolated from the Lactobacillus plantarum portion of a commercial meat starter culture showed that the isolate, phage fri, belonged to the Bradley group A bacteriophages. It had a regular six-sided head (90 nm diameter), and a contractile tail (190 nm in length). Short tail fibres were observed at the distal end of the sheath. Fluorescent staining with acridine orange indicated that phage fri contained double-stranded DNA. The resistance to high concentrations of either chloroform or ether showed that its lipid content was negligible. Heat lability was demonstrated by inactivation of a phage fri population within 10 min at 60°C and within 5 min at 70°C. It tolerated pH levels of 3.0–8.0 and exhibited greater stability in the acid region than did its host strain. The latent and rise periods were both 75 min, and the average burst size 200 pfu/cell. Sensitivity was limited to the Lact. plantarum strain of only one manufacturer of the commercial meat starters investigated.     

Effective plasmid pX3 transduction in Lactobacillus delbrueckii by bacteriophage LL-H

High-frequency plasmid transductions in Lactobacillus delbrueckii subsp. lactis and subsp. bulgaricus strains mediated by pac-type bacteriophages were observed and further investigated. The frequency of plasmid transduction by phages LL-H and LL-S attained levels of from 0.10 to about 1 with plasmid pX3, but only about 2 × 10⁻² with plasmid pJK650. Infection of L. delbrueckii subsp. lactis strain LKT(pX3) or ATCC 15808(pX3) with phage LL-H resulted in intensive concatemerization of plasmid pX3, and most progeny phage particles contained concatemers of plasmid DNA instead of phage LL-H DNA. The synthesis of phage LL-H DNA was depressed. No evident homology or recombination was observed between phage LL-H DNA and plasmid pX3. The unusually high frequency of plasmid pX3 transduction by phage LL-H could be considered to result from specific interaction(s) between a particular phage and plasmid. These interactions may include pX3-mediated blockage of phage LL-H DNA replication and effective use of a particular pac-like site located about 1 kb from BglII in the smaller NdeI-BglII fragment of plasmid pX3. Phage LL-H together with plasmid vector pX3 could be used as effective plasmid transduction tools for genetic engineering of L. delbrueckii subsp. lactis and subsp. bulgaricus strains.     

Defective site-specific integration elements are present in the genome of virulent bacteriophage LL-H of Lactobacillus delbrueckii.

The phage attachment site, attP, and the integrase-encoding gene, int, are sufficient to promote site-specific integration of the temperate phage mv4 genome into the chromosome of the Lactobacillus delbrueckii host (L. Dupont, B. Boizet-Bonhoure, M. Coddeville, F. Auvray, and P. Ritzenthaler, J. Bacteriol. 177:586--595, 1995). The mv4 genome region containing these elements was compared at the nucleotide and amino acid levels with that of the closely related virulent phage LL-H. Complex DNA rearrangements were identified; a truncated integrase gene and two sites homologous to the mv4 attP site were detected in the genome of the virulent phage LL-H. These observations suggest that the two phages derive from a common temperate ancestor.     

Characterization of the bacteriophage B2 of Lactobacillus plantarum ATCC 8014

Bacteriophage B2 of Lactobacillus plantarum ATCC 8014, isolated in 1971, belonged to Bradley's group B. Electron microscopy revealed an isometric head (110 nm) and a long non-contractile and flexible tail (500 nm) containing about 75 regularly aligned lateral striations. Burst size was 12-14 phages per infectious centre. The latent period for phage development was 75 min and the rise period approximately 90 min. The phage particle contained 5 major proteins. The buoyant density of the phage in CsCl was measured as 1.575 g/cm3. B2 genome was a linear double-stranded DNA molecule of 37 +/- 1% guanosine-cytosine. Its size was 73 kilobase pairs (kbp). Restriction analysis of the genome showed that 4 restriction enzymes (Xba I, Sac I, Bgl II and Sma I) gave single site cuts in the DNA, while Ava I and Sal I formed 2 and 5 cuts, respectively.